Hybridization of Metal-Organic Frameworks with attapulgite for magnetic solid phase extraction and determination of benzoylurea insecticides in environmental water samples

Synthesis of Magnetic Attapulgite Nanoparticles Via a Novel Surface Covalent Reaction Method and its Application in the Magnetic Solid Phase Extraction

In this study, the attapulgite nanoparticle was immobilized on the surface of magnetic nanoparticle Fe3O4 via a novel surface covalent reaction method for the magnetic solid phase extraction (MSPE) for the first time. The surface covalent reaction method has the advantages of controllable steps, and can make the magnetic attapulgite nanoparticle (MANP) have good homogeneity and high stability. Field emission scanning electron microscopy, equipped with an energy dispersive spectrometer, Nitrogen adsorption BET, X-ray diffraction and Fourier transform infrared spectroscopy were applied to characterize the prepared MANP, confirming that the attapulgite nanoparticle could be effectively immobilized on the surface of magnetic nanoparticle Fe3O4 via covalent reactions. Under optimal conditions of the MSPE experiment based on the MANP, the limits of detection were found to be 10 ng/mL for melamine and 3 ng/mL for cyromazine with a relative standard deviation < 10% by a high-performance liquid chromatography system. Meanwhile, 0.1 mg/mL melamine in milk and 0.1 mg/mL cyromazine in cucumber can also be detected according to our MSPE procedure. More importantly, the MANP still has good magnetism and enrichment efficiency after several decades of use. These results showed that the MANP prepared by our method is a kind of promising material for the MSPE.

ZnS:Mn Quantum Dots Coated with a Silica Molecularly Imprinted Polymer for Trace Teflubenzuron Detection in Vegetable Samples

A novel nanocomposite fluorescent probe consisting of quantum dots and a silica molecularly imprinted polymer (MIPs-capped ZnS:Mn QDs) was synthesized and applied for the rapid detection of teflubenzuron (TBZ) based on the fluorescence quenching of a composite probe via TBZ. The fluorescence quenching efficiency of MIP@SiO2@ZnS:Mn QDs displayed a linear relationship over the concentration range of 0-26.24 μmol/L with a correlation coefficient of 0.9857 and the limit of detection was 2.4 μg/L. The selectivity test showed that the nanocomposite had good selectively rebind TBZ with higher imprinting factor of 3.06 compared with four structurally similar compounds. In addition, the probe was successfully applied to the detection of TBZ in vegetable samples with a recovery of 90.3~97.1% and with a relative standard deviation below 3.2%. This developed method has the advantages of simple preparation, fast response and low toxicity for trace TBZ detection.

In situ growth of ZIF-67 to construct core-shell mosaic structural composites for efficient extraction of benzoylurea insecticides

A novel mosaic structure Silica@C/Co@ZIF-67 composite was synthesized by successfully embedding Co nanoparticles on the surface of silica spheres with the help of thermoplastic polyethyleneimine by carbon-reduction. The ZIF-67 half-shell layer structure was synthesized by the in-situ growth of ZIF-67 on the surface of silica spheres through the coordination of 2-methylimidazole with Co metal nodes. The composite was used as a magnetic solid-phase extraction adsorbent combined with high performance liquid chromatography-ultraviolet detector (HPLC-UV) for the extraction and determination of benzoylurea insecticides (BUs) in vegetables and tea. Based on the presence of π-π, hydrophobic and hydrogen bonding interactions between Silica@C/Co@ZIF-67 and BUs, the BUs were rapidly captured by the composites resulting in high adsorption performance. Under the optimal extraction parameters, the linear ranges were 0.3-200 µg L-1 for diflubenzuron, 0.6-200 µg L-1 for chlorbenzuron, and 1.0-200 µg L-1 for triflumuron, teflubenzuron, and flufenoxuron, with correlation coefficients (R2) greater than 0.9991. The limits of detection (LODs) of the method were 0.1-0.3 μg L-1, and the relative standard deviations (RSDs) were 1.2-3.0% for intra-day and 2.6-4.6% for inter-day. In the spiked recovery experiments of vegetables and tea, the recoveries of the five kinds of BUs ranged from 75.8 to 112.9%. In addition, after 10 repetitions using Silica@C/Co@ZIF-67, the recoveries of the five kinds of BUs were still as high as 78.4 to 83.9%.

Magnetite Metal-Organic Frameworks: Applications in Environmental Remediation of Heavy Metals, Organic Contaminants, and Other Pollutants

Due to the increasing environmental pollution caused by human activities, environmental remediation has become an important subject for humans and environmental safety. The quest for beneficial pathways to remove organic and inorganic contaminants has been the theme of considerable investigations in the past decade. The easy and quick separation made magnetic solid-phase extraction (MSPE) a popular method for the removal of different pollutants from the environment. Metal-organic frameworks (MOFs) are a class of porous materials best known for their ultrahigh porosity. Moreover, these materials can be easily modified with useful ligands and form various composites with varying characteristics, thus rendering them an ideal candidate as adsorbing agents for MSPE. Herein, research on MSPE, encompassing MOFs as sorbents and Fe₃O₄ as a magnetic component, is surveyed for environmental applications. Initially, assorted pollutants and their threats to human and environmental safety are introduced with a brief introduction to MOFs and MSPE. Subsequently, the deployment of magnetic MOFs (MMOFs) as sorbents for the removal of various organic and inorganic pollutants from the environment is deliberated, encompassing the outlooks and perspectives of this field.

Synthesis of nitrogen-rich magnetic hypercrosslinked polymer as robust adsorbent for the detection of neonicotinoids in honey, tomatoes, lettuce and Chinese cabbage

In this study, a novel nitrogen-rich magnetic hypercrosslinked polymer (Fe3O4@Ph-HCP) was fabricated via a facile one-pot reaction of 1,3,5-triphenylbenzene, 2,4-dichloropyrimidine and phenyl-functionalized magnetic Fe3O4 nanoparticles. The Fe3O4@Ph-HCP possessed high specific surface, abundant nanopores and good stability. Especially, Fe3O4@Ph-HCP exhibited excellent adsorption capability with fast adsorption rate to neonicotinoid insecticides. It was applied as a superior magnetic adsorbent for rapid enrichment and isolation of four neonicotinoid insecticides (thiamethoxam, imidacloprid, acetamiprid and thiacloprid) from honey, tomato, lettuce and Chinese cabbage samples prior to high performance liquid chromatography-diode array detection. Under the optimized conditions, the good linearity was obtained in the range of 1-1000 ng g-1 for honey, tomato, lettuce and Chinese cabbage samples, and the detection limits (S/N = 3) were 0.30-0.67 ng g-1 for honey, 1-1.5 ng g-1 for tomato, lettuce and Chinese cabbage. The spiked recoveries were 80.1-111%, and relative standard deviations were less than 10.0%. These results demonstrate that the developed method can be used as a good alternative method for sensitive determination of neonicotinoid insecticides in complex samples.

Co-precipitation based on layered double hydroxides and anionic surfactants for preconcentration of six benzoylurea insecticides in soft drinks before simultaneous analysis by high-performance liquid chromatography

Layered-double hydroxides (LDHs) modified with anionic surfactants via a co-precipitation method were developed for preconcentrating and simultaneous analysis of six benzoylurea insecticides (BUs) by high-performance liquid chromatography (HPLC). The anionic surfactants with different chain lengths, including sodium dodecylbenzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), sodium 1-nonane sulfonate (SNS), and sodium 1-hexane sulfonate monohydrate (SHS) were investigated to improve the extraction efficiency of LDHs. The SDBS-LDHs provided the highest efficiency for the enrichment of the BUs studied. Under the chosen conditions, enrichment factors in the range of 38-69 and detection limits in the range of 0.1-0.3 μg L^-1 were achieved. Good reproducibilities (RSD < 13.8%) and recoveries (71.4-118.7%) were also obtained. The proposed preconcentration method, used as an in situ procedure offers rapid and simple simultaneous preparation of LDHs and extraction of BUs. The method was successfully applied for residue analysis of BUs in fruit- and flower-derived soft drink samples.

[Recent advance of new sample preparation materials in the analysis and detection of environmental pollutants]

To successfully analyze complex samples and detect trace targets, sample pretreatment is essential. Efficient sample pretreatment techniques can remove or reduce interference from the sample matrix. It can also enrich analytes, thereby improving analytical accuracy and sensitivity. In recent years, various sample preparation techniques, including SPE, magnetic dispersion SPE, pipette tip SPE, stir bar extraction, fiber SPME, and in-tube SPME, have received increasing attention in environmental analysis and monitoring. The extraction efficiency mainly depends on the type of adsorbent material. Therefore, the development of efficient adsorbents is a crucial step toward sample preparation. This review summarizes and discusses the research advances in extraction materials over recent years. These extraction materials contain inorganic adsorbents, organic adsorbents, and inorganic-organic hybrid materials such as graphene, graphene oxide, carbon nanotubes, inorganic aerogels, organic aerogels, triazinyl-functionalized materials, triazine-based polymers, molecularly imprinted polymers, covalent organic frameworks, metal-organic frameworks, and their derivatives. These materials have been applied to extract different types of pollutants, including metal ions, polycyclic aromatic hydrocarbons, plasticizers, alkanes, phenols, chlorophenols, chlorobenzenes, polybrominated diphenyl ethers, perfluorosulfonic acids, perfluorocarboxylic acids, estrogens, drug residues, and pesticide residues, from environmental samples (such as water and soil samples). These sample preparation materials possess high surface areas, numerous adsorption sites, and allow extraction via various mechanisms, such as π-π, electrostatic, hydrophobic, and hydrophilic interactions, as well as hydrogen and halogen bond formation. Various sample pretreatment techniques based on these extraction materials have been combined with various detection methods, including chromatography, mass spectrometry, atomic absorption spectroscopy, fluorescence spectroscopy, and ion mobility spectroscopy, and have been extensively used for the determination of environmental pollutants. The existing challenges associated with the development of sample preparation techniques are proposed, and prospects for such extraction materials in environmental analysis and monitoring are discussed. Major trends in the field, including the development of efficient extraction materials with high enrichment ability, good selectivity, excellent thermal stability, and chemical stability, are discussed. Green sample pretreatment materials, environmentally friendly synthesis methods, and green sample pretreatment methods are also explored. Rapid sample pretreatment methods that can be conducted within minutes or seconds are of significant interest. Further, online sample pretreatment and automatic analysis methods have attracted increasing attention. Besides, real-time analysis and in situ detection have been important development directions, and are expected to be widely applicable in environmental analysis, biological detection, and other fields. Modern synthesis technology should be introduced to synthesize specific extraction materials. Controllable preparation methods for extraction materials, such as the in situ growth or in situ preparation of extraction coatings, will acquire importance in coming years. It will also be important to adopt high-performance materials from other fields for sample pretreatment. Organic-inorganic hybrid extraction materials can combine the advantages both organic materials and inorganic materials, and mutually compensate for any disadvantages. Extraction materials doped with nanomaterials are also promising. Although existing sample pretreatment techniques are relatively efficient, it is still imperative to develop novel sample preparation methods.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.