A design of fluorescence-based sensor for the detection of dopamine via FRET as well as live cell imaging

3-aminophenylboronic acid modified carbon nitride quantum dots as fluorescent probe for selective detection of dopamine and cell imaging

Dopamine (DA) is the most abundant catecholamine neurotransmitter in the brain and plays an extremely essential role in the physiological activities of the living organism. There is a critical need for accurately and efficiently detecting DA levels in organisms in order to reflect physiological states. Carbon nitride quantum dots (C3N4) were, in recent years, used enormously as electrochemical and fluorescence probes for the detection of metal ions, biomarkers and other environmental or food impurities due to their unique advantageous optical and electronic properties. 3-Aminophenylboronic acid (3-APBA) can specifically combine with DA through an aggregation effect, providing an effective DA detection method. In this work, 3-APBA modified carbon nitride quantum dots (3-APBA-CNQDs) were synthesized from urea and sodium citrate. The structure, chemical composition and optical properties of 3-APBA-CNQDs were investigated by XRD, TEM, UV-visible, and FT-IR spectroscopy. The addition of DA could induce fluorescence quenching of 3-APBA-CNQDs possibly through the inner filter effect (IFE). 3-APBA-CNQDs shows better selectivity and sensitivity to DA than other interfering substances. By optimizing the experiment conditions, good linearity was obtained at 0.10-51μM DA with a low detection limit of 22.08 nM. More importantly, 3-APBA-CNQDs have been successfully applied for the detection of DA in human urine and blood samples as well as for bioimaging of intracellular DA. This study provides a promising novel method for the rapid detection of DA in real biological samples.

Synthesis and structural elucidation of a unique turn-off fluorescent sensor based on oxo-bridged tin (IV) cluster for selective detection of dopamine in biological fluids

An oxo-bridged Sn (IV) Cluster, (TOC) was synthesized and fully characterized by FT-IR, UV-vis, 1H NMR, 119Sn NMR, Mass spectrometry and single crystal X-ray diffraction studies. The single-crystal X-ray analysis revealed that the crystal crystallizes in the monoclinic crystal system possessing the P 21/c space group and exhibited a distorted trigonal bipyramidal geometry. The TOC exhibited a unique turn-off fluorescence response for the selective detection of dopamine (DA) over other analytes. The stoichiometry between the TOC and DA was calculated using Job's plot. The value of the detection limit was found to be 1.33 µM. The Hirshfeld surface analysis was carried out on the crystal structure to investigate the H-H, Cl-H, Cl-Cl, Sn-Cl and Cl-C interaction studies in the molecule. Density Functional Theory (DFT) studies further supported the sensing mechanism, which closely agreed with the experimental results. Furthermore, the TOC chemosensor was used to detect DA in human blood plasma, and molecular docking studies validated the interaction between the chemosensor and protein. Confocal fluorescence imaging studies were carried out and validated TOC sensing ability for DA in human blood plasma.

Fluorescent-Based Neurotransmitter Sensors: Present and Future Perspectives

Neurotransmitters (NTs) are endogenous low-molecular-weight chemical compounds that transmit synaptic signals in the central nervous system. These NTs play a crucial role in facilitating signal communication, motor control, and processes related to memory and learning. Abnormalities in the levels of NTs lead to chronic mental health disorders and heart diseases. Therefore, detecting imbalances in the levels of NTs is important for diagnosing early stages of diseases associated with NTs. Sensing technologies detect NTs rapidly, specifically, and selectively, overcoming the limitations of conventional diagnostic methods. In this review, we focus on the fluorescence-based biosensors that use nanomaterials such as metal clusters, carbon dots, and quantum dots. Additionally, we review biomaterial-based, including aptamer- and enzyme-based, and genetically encoded biosensors. Furthermore, we elaborate on the fluorescence mechanisms, including fluorescence resonance energy transfer, photon-induced electron transfer, intramolecular charge transfer, and excited-state intramolecular proton transfer, in the context of their applications for the detection of NTs. We also discuss the significance of NTs in human physiological functions, address the current challenges in designing fluorescence-based biosensors for the detection of NTs, and explore their future development.

Conjugated Polyelectrolyte Containing a High Density of Pendant Phenylboronic Acid Groups for Dopamine Detection

A fluorescent sensing system based on a conjugated polyelectrolyte was constructed to detect dopamine (DA) in complex samples. The conjugated polymer PFPE-PBA with poly[fluorenyl-alt-p-phenyleneethynylene] (PFPE) as the backbone and carrying four pendant phenylboronic acid (PBA) groups in each repeat unit was synthesized. PFPE-PBA was found to have good solubility in polar solvents. After optimization, glycine-NaOH at pH 10 was selected as the buffer, and the solvent composition of the system was set to methanol/water (9/1 by volume). Titration experiments showed that DA could effectively quench the fluorescence of the polymer solution with a response time within 60 s and a limit of detection of 23 nM. Polyols, cations, and other possible interfering substances do not significantly affect the fluorescence of the polymer, thereby allowing for the highly selective detection of DA. Furthermore, quantitative determination of DA in spiked serum and artificial urine samples was successfully demonstrated, with recoveries ranging from 96.7 to 104%. Preliminary mechanism studies suggest that the pedant PBAs capture DA via reaction with the catechol group, and the fluorescence quenching is most likely due to the photoinduced electron transfer between the aromatic part of DA and the conjugated backbone. This study provides a general strategy for the future design of conjugated polyelectrolyte-based sensing systems.

Smartphone-Based Dopamine Detection by Fluorescent Supramolecular Sensor

Supramolecular recognition of dopamine by two quinoxaline cavitands was studied in solution by fluorescence titrations, ESI-MS and ROESY measurements. In addition, the tetraquinoxaline cavitand was dropped onto a siloxane-based polymeric solid support, obtaining a sensor able to detect dopamine in a linear range of concentrations 10 Mm-100 pM, with a detection limit of 1 pM, much lower than the normal concentration values in the common human fluids (plasma, urine and saliva), by using a simple smartphone as detector. This sensor shows also good selectivity for dopamine respect to the other common analytes contained in a saliva sample and can be reused after acid-base cycles, paving the way for the realization of real practical sensor for human dopamine detection.

One step synthesis of ultra-high quantum yield fluorescent carbon dots for "on-off-on" detection of Hg2+ and biothiols

In this paper, the carbon dots (CDs) with strong blue fluorescence were synthesized through hydrothermal method, which using folic acid, ammonium citrate and ethylenediamine as precursors. The prepared CDs with a high absolute quantum yield of 81.94% and showed excellent stability in high concentration salt solution and different pH conditions. With the addition of Hg²⁺, the signal of CDs was selectively quenched. At the same time, the CDs-Hg²⁺ system could be recovered after the introduction of biothiols. Moreover, the fluorescence of CDs showed a good linear relationship with Hg²⁺ (1-15 µM), and the detection limit as low as 0.08 µM. In addition, the prepared CDs with low toxicity could be used to detect Hg²⁺ in living cells and actual water samples.

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Turning waste into wealth: facile and green synthesis of carbon nanodots from pollutants and applications to bioimaging

In an effort to turn waste into wealth, Reactive Red 2 (RR2), a common and refractory organic pollutant in industrial wastewater, has been employed for the first time as a precursor to synthesize carbon nanodots (CNDs) by a facile, green and low-cost route, without utilization of any strong acids or other oxidizers. The detailed characterizations have confirmed that the synthesized CNDs exhibit good water dispersibility, with a mean particle size of 2.43 nm and thickness of 1-3 layers. Importantly, the excellent fluorescence properties and much reduced biotoxicity of the CNDs confer its potential applications in further biological imaging, which has been successfully verified in both in vitro (cell culture) and in vivo (zebrafish) model systems. Thus, it is demonstrated that the synthesized CNDs exhibit nice biocompatibility and fluorescence properties for bioimaging. This work not only provides a novel economical and environmentally friendly approach in recycling a chemical pollutant, but also greatly promotes the potential application of CNDs in biological imaging.