Rapid trace analysis of ceftriaxone using new fluorescent carbon dots as a highly sensitive turn-off nanoprobe

Carbon Dots Employed for the Detection of Ranitidine and Elaborating the Detecting Mechanism

Carbon dots (CDs) has been widely utilized in multiple fields, especially towards kinds of drug analyses, owing to its superior optical properties and satisfactory stability. Herein, we rapidly synthesized one kind of soluble bright-blue fluorescent CDs through a facile microwave method, while disodium ethylenediaminetetraacetic acid and phosphoric acid served as the raw materials. Importantly, introducing ranitidine into these CDs resulted in its decreased fluorescence, and thus an innovative method of detecting ranitidine was successfully established, which showed the favorable selectivity and anti-interference ability. With the optimal conditions, the standard curve diagram of F0/F against concentration of ranitidine was linear in the range of 6-2000 µM with a correlation coefficient of 0.9833, and the limit of detection (LOD) was calculated to be 4.2 µM. Meanwhile, we also explored the detecting mechanism of ranitidine by CDs, and elaborated that as the internal filtration effect. Consequently, we may broaden the avenues of detecting ranitidine on the basis of CDs.

Highly sensitive and novel dual-emission fluorescence nanosensor utilizing hybrid carbon dots-quantum dots for ratiometric determination of chlorpromazine

Herein, a ratiometric fluorimetric nanosensor is introduced for the sensitive and selective analysis of chlorpromazine (CPZ) via employing blue-emitting B-doped carbon dots (B-CDs) as the reference fluorophore and green-emitting CdTe capped thioglycolic acid (TGA) quantum dots (TGA-CdTe-QDs) as the specific recognition probe. The sensor exhibits dual emission centered at 440 and 560 nm, under a single excitation wavelength of 340 nm. Upon the addition of ultra-trace amount of CPZ, the fluorescence signal of TGA-CdTe-QDs declines due to electron transfer process from excited TGA-CdTe-QDs to CPZ molecules, whereas the fluorescence peak of B-CDs is unaffected. Therefore, a new fluorimetric platform was prepared for the assay of CPZ in the range of 2.2 × 10-10 to 5.0 × 10-9 M with a detection limit of 1.3 × 10-10 M. Moreover, the practicability of the designed strategy was investigated for the detection of CPZ in biological samples and the results demonstrate that it possesses considerable potential to be utilized in practical applications.

High sensitivity, low-cost, and disposability: A novel screen-printed electrode developed for direct electrochemical detection of the antibiotic ceftriaxone

This study describes the development of a novel disposable and low-cost electrochemical platform for detecting the antibiotic ceftriaxone. The screen-printed electrode has been modified with a novel hybrid nanostructure containing silicon oxide (SiO2), zirconium oxide (ZrO2), and nitrogen-doped carbon quantum dots (Cdot-N). Different techniques like Fourier-transform infrared spectroscopy, Raman spectroscopy, and transmission electron microscopy characterized the hybrid nanostructure used in the sensor surface modifier material. The hybrid nanostructure showed an excellent synergistic effect that contributed to the oxidation reaction of ceftriaxone. The screen-printed electrode modified with SiO2/ZrO2/Cdot-N nanostructure presented high sensitivity with a detection limit of 0.2 nmol L-1 in the linear range of 0.0078-40.02 μmol L-1. The measurements have been performed by square wave voltammetry technique. Studies on real samples of synthetic urine, urine, and tap water showed 95%-105% recovery without applying any sample pretreatment. The sensor demonstrated excellent selectivity in the antibiotic ceftriaxone determination in the presence of possible interferences cationic, Na+, K+, Ca2+, Mg2+, Cu2+, Pb2+, Mn2+, Zn2+, Co2+, and biological, glucose, caffeine, uric acid, and ascorbic acid. The developed sensor becomes a selective, sensitive, and applicable tool in determining the antibiotic ceftriaxone.

Recent Applications of Quantum Dots in Pharmaceutical Analysis

Nanotechnology has emerged as one of the most potential areas for pharmaceutical analysis. The need for nanomaterials in pharmaceutical analysis is comprehended in terms of economic challenges, health and safety concerns. Quantum dots (QDs)or colloidal semiconductor nanocrystals are new groups of fluorescent nanoparticles that bind nanotechnology to drug analysis. Because of their special physicochemical characteristics and small size, QDs are thought to be promising candidates for the electrical and luminescent probes development. They were originally developed as luminescent biological labels, but are now discovering new analytical chemistry applications, where their photo-luminescent properties are used in pharmaceutical, clinical analysis, food quality control and environmental monitoring. In this review, we discuss QDs regarding properties and advantages, advances in methods of synthesis and their recent applications in drug analysis in the recent last years.

An overview on animal/human biomass-derived carbon dots for optical sensing and bioimaging applications

Over the past decade, carbon dots (CDs) have emerged as some of the extremely popular carbon nanostructures for diverse applications. The advantages of sustainable CDs, characterized by their exceptional photoluminescence (PL), high water solubility/dispersibility, non-toxicity, and biocompatibility, substantiate their potential for a wide range of applications in sensing and biology. Moreover, nature offers plant- and animal-derived precursors for the sustainable synthesis of CDs and their doped variants. These sources are not only readily accessible, inexpensive, and renewable but are also environmentally benign green biomass. This review article presents in detail the production of sustainable CDs from various animal and human biomass through bottom-up synthetic methods, including hydrothermal, microwave, microwave-hydrothermal, and pyrolysis methods. The resulting CDs exhibit a uniform size distribution, possibility of heteroatom doping, surface passivation, and remarkable excitation wavelength-dependent/independent emission and up-conversion PL characteristics. Consequently, these CDs have been successfully utilized in multiple applications, such as bioimaging and the detection of various analytes, including heavy metal ions. Finally, a comprehensive assessment is presented, highlighting the prospects and challenges associated with animal/human biomass-derived CDs for multifaceted applications.

Recent Advances in Fluorescent Nanoprobes for Food Safety Detection

Fluorescent nanoprobes show similar fluorescence properties to traditional organic dyes, but the addition of nanotechnology accurately controls the size, shape, chemical composition, and surface chemistry of the nanoprobes with unique characteristics and properties, such as bright luminescence, high photostability, and strong biocompatibility. For example, modifying aptamers or antibodies on a fluorescent nanoprobe provides high selectivity and specificity for different objects to be tested. Fluorescence intensity, life, and other parameters of targets can be changed by different sensing mechanisms based on the unique structural and optical characteristics of fluorescent nanoprobes. What's more, the detection of fluorescent nanoprobes is cost-saving, simple, and offers great advantages in rapid food detection. Sensing mechanisms of fluorescent nanoprobes were introduced in this paper, focusing on the application progress in pesticide residues, veterinary drug residues, heavy metals, microbes, mycotoxins, and other substances in food safety detection in recent years. A brief outlook for future development was provided as well.

Highly selective and sensitive determination of ceftriaxone sodium using nitrogen-rich carbon dots based on ratiometric fluorescence

Selective and sensitive determination of ceftriaxone sodium (CTR) trace residues is of great importance for food safety and environmental protection. Herein, a determination method based on ratiometric fluorescence and colorimetric method with nitrogen-rich carbon dots as fluorophore is reported. The functional surfaces of indole-derived carbon dots (I-CDs) containing nitrogen and carbon groups can be selectively bound to CTR by electrostatic forces, leading to a hindered conjugation system and deprotonation of the amine on the pyrrole ring, resulting in a distinct variety in fluorescence and absorption wavelength and intensity. With the addition of CTR, the fluorescence at 577 nm can be selectively quenched, accompanied by a new emission peak appeared at 507 nm. The limits of detection (LODs) were estimated to be 19.7 nM and 78.0 nM based on the ratiometric fluorescence method and colorimetric method, respectively. Finally, the in situ visual quantitative determination of CTR using this nanosensor was achieved by combining with the color recognizer of a smartphone, and the method was further validated by spike and recovery test in real water samples including milk, seawater, and tap water.

Carbon dots derived from peptone as "off-on" fluorescent probes for the detection of oxalic acid

A simple and rapid microwave heating approach was reported for the preparation of water soluble carbon dots (CDs) using peptone as carbon source with the assistance of ethylenediamine. Several characterization techniques such as transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were employed to analyze CDs. The optical properties of synthesized CDs were examined by UV-vis and fluorescence spectroscopy. The CDs exhibit strong blue emission under 365 nm UV lamp and have the excitation and pH (2.0-12.0) dependent emission behavior. The fluorescence intensity of CDs can be selectively quenched by Co²⁺ via dynamic mechanism, while the addition of oxalic acid (OA) results in a remarkable recovery of the fluorescence intensity due to the strong coordination binding between oxalic acid and Co²⁺. Hence, the prepared CDs can conveniently serve as "off-on" fluorescent probes for highly sensitive determination of oxalic acid. The wide linear range is 0.5-70 mg/L with a low detection limit of 0.288 mg/L. Furthermore, the probes were successfully applied to detect oxalic acid in tomato and cherry tomato samples with the recovery of 96.4 %-106.4 % and the relative standard deviation lower than 0.25 %.

Phosphineoxide-Chelated Europium(III) Nanoparticles for Ceftriaxone Detection

The present work demonstrates the optimization of the ligand structure in the series of bis(phosphine oxide) and β-ketophosphine oxide representatives for efficient coordination of Tb³⁺ and Eu³⁺ ions with the formation of the complexes exhibiting high Tb³⁺- and Eu³⁺-centered luminescence. The analysis of the stoichiometry and structure of the lanthanide complexes obtained using the XRD method reveals the great impact of the bridging group nature between two phosphine oxide moieties on the coordination mode of the ligands with Tb³⁺ and Eu³⁺ ions. The bridging imido-group facilitates the deprotonation of the imido- bis(phosphine oxide) ligand followed by the formation of tris-complexes. The spectral and PXRD analysis of the separated colloids indicates that the high stability of the tris-complexes provides their safe conversion into polystyrenesulfonate-stabilized colloids using the solvent exchange method. The red Eu³⁺-centered luminescence of the tris-complex exhibits the same specificity in the solutions and the colloids. The pronounced luminescent response on the antibiotic ceftriaxone allows for sensing the latter in aqueous solutions with an LOD value equal to 0.974 μM.

Wild jujube-based fluorescent carbon dots for highly sensitive determination of oxalic acid

Fluorescent carbon dots (CDs) were synthesized by a one-step hydrothermal treatment of wild jujube and dl-tryptophan. The structure and properties of the CDs were confirmed by transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet visible absorption spectroscopy, fluorescence spectroscopy and so on. The as-prepared CDs exhibit excellent excitation-independent but pH-dependent (4.0-12.0) fluorescent features and emit blue strong fluorescence under 365 nm light. Hg²⁺ can decrease the fluorescence intensity of the CDs through static quenching, while the addition of oxalic acid (OA) recovers it owing to the coordination binding between oxalic acid and Hg²⁺. Based on this, the as-prepared CDs were used as a new "off-on" fluorescent probe for highly sensitive determination of oxalic acid with a wide linear detection range of 0.1-20 mg L^-1 and a low detection limit of 0.057 mg L^-1. Moreover, the fluorescent probe was successfully applied to detect oxalic acid in tomato and cherry tomato samples with satisfactory results.

A New Dual-peak Fluorescent Probe for Water Content Detection Made From Taxus

In this paper, the leaves of Taxus were used as the sole carbon source, and two kinds of carbon dots blue and red, with different properties, were synthesized by the hydrothermal method under different conditions. The red carbon dots were quenched in the water, and the blue carbon dots had stable fluorescence properties in water environment. The bimodal fluorescence probe formed by mixing could accurately and stably measure the water content in ethanol, which was in the range of 82.5%-100%, is highly correlated with the fluorescence intensity ratio (I₄₈₁/I₆₇₈) of mixed carbon dots under 390 nm excitation light, with R² = 0.995 and the detection limit as low as 0.31%. The experimental materials are environmentally friendly, low in cost, and simple to operate, as well as the water content measured by proportional fluorescence has high accuracy, which provides a new method for measuring moisture in ethanol.

Fabrication of novel quantum dots for the estimation of COVID-19 antiviral drug using green chemistry: application to real human plasma

The COVID-19 pandemic has encouraged the search for novel antiviral medications. Recently, molnupiravir (MOL) has been approved as an oral antiviral to manage COVID-19. Thus, the development of sensitive and cost-effective methods for quantification of MOL in real plasma samples (pharmacokinetic) and pharmaceutical tablets is required. Herein, we present the fabrication of novel fluorescent polyamine quantum dots (PA@CQDs) fabricated from apricots using one step synthesis for analysis of MOL. The relative fluorescence intensity (RFI) of the synthesized quantum dots was influentially quenched by the addition of molnupiraivr. The linear range was found to be between 2-70 ng mL-1 with lower limit of quantitation (LOQ) equal to 1.61 ng mL-1. The fluorescent probe was successfully utilized in a pharmacokinetic study of MOL with maximum plasma concentration (C max) 920.2 ± 6.12 ng mL-1 without any matrix interference. The sensitivity and selectivity of the presented method allow its application in clinical laboratories.

High quantum yield nitrogen and boron co-doped carbon dots for sensing Ag+, biological imaging and fluorescent inks

Herein, bright blue-green fluorescent nitrogen and boron co-doped carbon dots (N, B-CDs) with a quantum yield (QY) up to 33.04% were synthesized viahydrothermal treatment from ammonium citrate tribasic and 3-aminophenylboronic acid. The synthesized N, B-CDs showed outstanding water solubility. According to the principle of the static quenching effect (SQE), the synthesized N, B-CDs were utilized as an efficient sensor for sensing Ag⁺. The linear range and limit of detection (LOD) of the sensor for Ag⁺ are 0.99-26.04 μM and 9.03 nM (3σ/m). The proposed method was successfully adopted to detect Ag⁺ in environmental water, which is of great significance to environmental detection. Furthermore, due to the excellent fluorescence performance, the N, B-CDs were found to be an effective tool for biological imaging and as a fluorescent ink, which widens the horizons for the multifunctional applications of N, B-CDs.