Sulfur quantum dots: A novel fluorescent probe for sensitive and selective detection of Fe3+ and phytic acid

Advances in the synthesis and properties of sulfur quantum dots for food safety detection and antibacterial applications

Food safety is closely related to human health and has become a worldwide, pressing concern. Food safety analysis is essential for ensuring food safety. Sulfur quantum dots (SQDs), a new type of zero-dimensional metal-free nanomaterials, have recently become the focus of scientific research due to their good luminescence properties, dispersibility, biocompatibility, and inherent antibacterial properties. This review focuses on recent advances in SQDs, with emphasis on their practical applications in the food field. First, commonly used methods for the synthesis of SQDs are presented, including traditional and emerging strategies. The properties of SQDs are then analyzed in detail, particularly their luminescence properties, catalytic activities, and reducing properties. Next, the use of SQDs in food safety detection and antibacterial fields are elaborated. Finally, this review discusses the challenges associated with the use of SQDs in food safety detection and antimicrobial applications.

Development of a Novel Sulfur Quantum Dots: Synthesis, 99mTc Radiolabeling, and Biodistribution

Sulfur quantum dots (SQDs) as free heavy metal element quantum dots have promising applications in diagnosis and therapy; however, SQDs' in vivo biodistribution has not been studied. In the current study, SQDs were synthesized directly from cheap sublimated sulfur powder via a one-pot solvothermal method, and sucrose was used as a stabilizer to enhance stability and biocompatibility. The as-obtained SQDs with an average size of 4.6 nm exhibited great water dispersity, highly favorable quantum yield (21.5%), and uniformly spherical shape which were confirmed by UV-Vis, fluorescence spectrophotometer, TEM, and FESEM/EDX/PSA analyses. Moreover, the as-synthesized SQDs had very low cytotoxicity based on cancer (C26) and normal (L929) cell lines via MTT assay. And also, SQDs were radio-labeled directly by Technetium-99m (99mTc), which had good stability ranging from 86 to 99% in PBS and human serum. The SQDs' cell uptake on C26 and L929 cell lines demonstrated that cancer cells had more uptake than normal cells by increasing concentrations. Moreover, SQDs' in vivo biodistribution results displayed high kidney dose accumulation and rapid renal clearance, making them suitable for imaging and therapeutic applications.

A Dual-Mode Detection Sensor Based on Nitrogen-Doped Carbon Dots for Visual Detection of Fe(III) and Ascorbic Acid via a Smartphone

Accurately and promptly detecting Fe3+ and ascorbic acid (AA) is a crucial objective. In this study, nitrogen-doped carbon dots (N-CDs) were synthesized using a one-step hydrothermal synthesis method with 6,9-diamino-2-ethoxyacridine lactate as the precursor. The introduction of Fe3+ and AA resulted in both fluorescence (FL) quenching and enhancement of the synthesized N-CDs. The fluorescent response of the N-CDs probe to Fe3+ was observed in the concentration range of 5-20 µM and 25-50 µM, with a limit of detection (LOD) of 290 nM. Remarkably, the fluorescence of the N-CDs was recovered upon the addition of AA to the N-CDs-Fe3+ system. Using the "off-on" fluorescent N-CDs probe, a linear range of 40-90 µM was achieved with an LOD of 0.69 µM. Additionally, the feasibility of employing a smartphone equipped with an RGB Color Picker was demonstrated for the analysis of Fe3+ and AA concentrations, providing a novel visual detection method. Furthermore, the application of N-CDs in solution demonstrated considerable potential for visually detecting Fe3+ and AA. The proposed dual-mode detection sensor was found to be simple, efficient, and stable, enabling the successful determination of Fe3+ and AA in practical samples with satisfactory results.

Two-photon excited luminescence of sulfur quantum dots for heavy metal ion detection

Spectrally-resolved third-order nonlinear optical properties of water-dispersed sulfur quantum dots (SQDs) were investigated in the wavelength range from 740 nm to 820 nm with the two-photon excited emission technique using a tunable femtosecond laser system. The maximum value of the two-photon absorption (TPA) cross-section (σ2) for ∼5.4 nm size SQDs was found to be 185 GM (Goeppert-Mayer unit), while the two-photon brightness (σ2 × η) was found to be 1.5 GM at 780 nm, the wavelength being in the first biological transmittance window. The TPA properties are presented here as appropriate cross-sections normalized per molecular weight which enables meaningful comparison of the nonlinear factors of the studied quantum dots with those of various nanomaterials. The optimized TPA properties of these hydrophilic colloidal SQDs may be potentially useful for detection of Fe3+ metal ions. The experimentally determined limit of Fe3+ detection for both one- and two-photon regime was 10 μmol L-1 (0.6 μg mL-1). Förster resonance energy transfer between SQDs as donors and Fe3+ metal ions as acceptors was confirmed as one of the possible detection mechanisms using a time-correlated single photon counting technique.

A mini review on selenium quantum dots: synthesis and biomedical applications

In recent years, the demand for advanced biomedical nanomaterials has seen a noticeable surge. Among the essential trace elements in the human body, selenium has gained recognition for its anti-cancer, antioxidant, and immune regulatory properties. However, traditional selenium-based semiconductor quantum dots (QDs) are often comprised of heavy metal elements that tend to be toxic, thereby limiting their usage in biomedical applications. Fortunately, the advent of elemental selenium quantum dots (SeQDs), a new kind of fluorescent nanomaterial with unique physicochemical properties, has provided a solution to this problem. These SeQDs are known for their low toxicity and good biocompatibility, making them a promising candidate for biomedical applications. In this mini-review, we delve into the synthesis methods of fluorescent SeQDs and the latest progress in their applications in bioimaging, biosensing, and diagnosis treatment. Finally, we identify the major challenges and future prospects in the field of SeQDs.

Iminobenzophenone-thiophen hydrazide schiff base: a selective turn on sensor for paramagnetic Fe3+ ion and application in real sample analysis

A highly selective turn-on sensor for paramagnetic Fe³⁺ ions based on (E)-N'-((2-aminophenyl)(phenyl)methylene)thiophene-2-carbohydrazide is successfully synthesized. The sensor BPTH is significantly selective and sensitive towards Fe³⁺ ions over other interfering metal ions especially Cu²⁺ and Co²⁺ ions with a lowest limit of recognition 1.48 × 10^-7 M. The turn-on sensing mechanism involves enhanced charge transfer. Fe³⁺ ion forms strong binding with the ligand with a K_a value about 8.23 × 10⁴ M^-1 and a 1:1 stoichiometric ratio is confirmed by Job's plot experiment. With Fe³⁺ ion, the yellow ligand BPTH change to a green fluorescent and reversible with 1 equivalent of EDTA. Practical application of sensor is demonstrated in real sample analysis.

Shaping Sulfur Precursors to Low Dimensional (0D, 1D and 2D) Sulfur Nanomaterials: Synthesis, Characterization, Mechanism, Functionalization, and Applications

Low-dimensional sulfur nanomaterials featuring with 0D sulfur nanoparticles (SNPs), sulfur nanodots (SNDs) and sulfur quantum dots (SQDs), 1D sulfur nanorods (SNRs), and 2D sulfur nanosheets (SNSs) have emerged as an environmentally friendly, biocompatible class of metal-free nanomaterials, sparking extensive interest in a wide range application. In this review, various synthetic methods, precise characterization, creative formation mechanism, delicate functionalization, and versatile applications of low dimensional sulfur nanomaterials over the last decades are systematically summarized. Initially, it is striven to summarize the progress of low dimensional sulfur nanomaterials from versatile precursors by using different synthetic approaches and various characterization. Then, a multi-faceted proposed formation mechanism with emphasis on how these different precursors produce corresponding SNPs, SNDs, SQDs, SNRs, and SNSs is highlighted. Besides, it is essential to fine-tune the surface functional groups of low dimensional sulfur nanomaterials to form new complex nanomaterials. Finally, these sulfur nanomaterials are being investigated in bio-sensing, bio-imaging, lithium-sulfur batteries, antibacterial activities, plant growth along with future perspective and challenges in emerging fields. The purpose of this review is to tailor low dimensional nanomaterials through accurately selecting precursors or synthetic approach and provide a foundation for the formation of versatile sulfur nanostructure.

A water-soluble naphthalimide fluorescent probe for Cr2O72- and Fe3+ based on inner filter effect

A probe 3 (2-ethoxy-N-(2-(2-(2-hydroxyethoxy)ethyl)-1,3-dioxo-2,3-dihydro-1H-benzo[de] isoquinolin-6-yl)benzamide) that could selectively respond to Cr₂O₇^2- and Fe³⁺ was reported in this paper. The selectivity, pH titration, concentration titration, detection limit, time dependence, quenching constant and recognition mechanism of probe 3 for Cr₂O₇^2- and Fe³⁺ were studied in CH₃CN/HEPES buffer solution. The results showed that Cr₂O₇^2- and Fe³⁺ could rapidly quench the fluorescence of probe 3 through the inner filter effect (IFE). The quenching kept constant after 30 s, and the quenching constants were 7.99 × 10³ L^.mol^-1 and 4.13 × 10³ L^.mol^-1, respectively. The detection limits of probe 3 for Cr₂O₇^2- and Fe³⁺ were 1.15 μmol^.L^-1 and 1.95 μmol^.L^-1, respectively, which were lower than the maximum allowable concentrations in drinking water stipulated by EPA. The determination results of Cr₂O₇^2- and Fe³⁺ in water samples indicated that probe 3 could be used as a potential detection tool in practical applications.

Inner filter effect-based red-shift and fluorescence dual-sensor platforms with sulfur quantum dots for detection and bioimaging of alkaline phosphatase

Alkaline phosphatase (ALP), one of the vital biomarkers in several diseases, plays a role in indicating disease presence or severity in early diagnosis. Here, a simple H₂O₂ assisted top-down method was used to synthesize sulfur quantum dots (SQDs) with excitation and emission at 355 nm and 440 nm. Adding ALP into p-nitrophenyl phosphate (p-NPP) and SQDs was found to exhibit a red shift in the emission wavelength and fluorescence intensity quenching of SQDs, respectively, allowing us to propose dual-sensor platforms of red shift of emission wavelength (RSEW) and fluorescence quenching of SQDs. These dual-sensor platforms were highly sensitive and selective in ALP detection, with a linear response to ALP in the concentration range of 0.25 to 100 U L^-1 and detection limits of 0.08 and 0.10 U L^-1, respectively. The absorption of p-NP at 400 nm showed a good overlap with the excitation and emission of SQDs, leading to inner filter effect-based RSEW and fluorescence quenching of SQDs. This sensor platform was successfully applied in ALP sensing of serum samples as well as monitoring of ALP in cells. More importantly, this platform can serve as an example of using RSEW to detect ALP.

New insight into the application of fluorescence platforms in tumor diagnosis: From chemical basis to clinical application

Early and rapid diagnosis of tumors is essential for clinical treatment or management. In contrast to conventional means, bioimaging has the potential to accurately locate and diagnose tumors at an early stage. Fluorescent probe has been developed as an ideal tool to visualize tumor sites and to detect biological molecules which provides a requirement for noninvasive, real-time, precise, and specific visualization of structures and complex biochemical processes in vivo. Rencently, the development of synthetic organic chemistry and new materials have facilitated the development of near-infrared small molecular sensing platforms and nanoimaging platforms. This provides a competitive tool for various fields of bioimaging such as biological structure and function imaging, disease diagnosis, in situ at the in vivo level, and real-time dynamic imaging. This review systematically focused on the recent progress of small molecular near-infrared fluorescent probes and nano-fluorescent probes as new biomedical imaging tools in the past 3-5 years, and it covers the application of tumor biomarker sensing, tumor microenvironment imaging, and tumor vascular imaging, intraoperative guidance and as an integrated platform for diagnosis, aiming to provide guidance for researchers to design and develop future biomedical diagnostic tools.

One-pot synthesis of robust dendritic sulfur quantum dots for two-photon fluorescence imaging and "off-on" detection of hydroxyl radicals and ascorbic acid

The straightforward preparation of fluorescent sulfur quantum dots (SQDs) with good photostability and biocompatibility and multifunction remains a challenge. Herein, a simple method to improve the performance of SQDs is reported, that is, using hyperbranched polyglycerol (HPG) as a ligand to direct the synthesis of dendritic HPG-SQD nanocomposites from cheap elemental sulfur. Thanks to the protection of HPG, the HPG-SQDs show much better biocompatibility and photostability as compared with the widely reported polyethylene glycol (PEG) ligand-capped SQDs (PEG-SQDs). In addition, the HPG-SQDs also present excellent aqueous solubility, stable fluorescence against environmental variation, good cell uptake capability, and strong single- and two-photon fluorescence. Moreover, the HPG-SQDs display sensitive and selective fluorescence "off-on" behavior to hydroxyl radicals (˙OH) and ascorbic acid (AA), respectively, and thereby hold potential as a fluorescent switch to detect ˙OH and AA. For the first time, the utilization of two-photon fluorescence of HPG-SQDs to monitor ˙OH and AA in cells is demonstrated in this study.

Sulfur quantum dots as a novel platform to design a sensitive chemiluminescence probe and its application for Pb2+ detection

The monitoring of Pb as a hazardous heavy metal element for the environment and human health is of high importance. In this study, a simple and sensitive chemiluminescence (CL) probe based on sulfur quantum dots (SQDs) was designed for the determination of Pb²⁺ . To the best of our knowledge, this is the first report about the analytical application of the CL method based on SQDs. For this purpose, SQDs were synthesized by a simple hydrothermal method and characterized by TEM, FT-IR, XPS and X-ray diffraction. Then, the direct chemiluminescence (CL) of SQDs elicited by common oxidants was investigated. The highest CL intensity was observed for the SQDs-KMnO₄ reaction, and its CL mechanism was studied. We indicated that the CL intensity of introduced system can be diminished as a result of interaction between Pb²⁺ and SQDs, and exploited this fact for designing a CL-based probe for the determination of Pb²⁺ . The CL intensity of SQDs-KMnO₄ reaction was linearly quenched by Pb²⁺ at the range of 50 to 2000 nM with a limit of detection as 16 nM (S/N=3). The probe was employed for the determination of Pb²⁺ in different water samples and the recovery results (95.2 to 102.8%) indicated the good analytical performance of the developed method.

Dielectric barrier discharge-accelerated one-pot synthesis of sulfur quantum dots for fluorescent sensing of lead ions and L-cysteine

Here, we report a novel method for the one-pot facile synthesis of sulfur quantum dots (SQDs) based on a dielectric barrier discharge (DBD)-accelerated H₂O₂ etching strategy within merely 20 min. The formation mechanism of SQDs was investigated, with which an "ON-OFF-ON" fluorescence sensor was developed for the detection of Pb²⁺ ions and L-cysteine.

Metal ion sensing with graphene quantum dots: detection of harmful contaminants and biorelevant species

Graphene quantum dots (GQDs) are attractive materials for use as highly selective and sensitive chemical sensors, owing to their simple preparation and affordability. GQDs have been successfully deployed as sensors for toxic metal ions, which is a significant issue due to the ever-increasing environmental contamination from agricultural and industrial activities. Despite the success of GQDs in this area, the mechanisms which underpin GQD-metal ion specificity are rarely explored. This lack of information can result in difficulties when attempting to replicate published procedures and can limit the judicious design of new highly selective GQD sensors. Furthermore, there is a dearth of GQD examples which selectively detect biologically relevant alkali and alkaline earth metals. This review will present the current state of GQDs as metal ion sensors for harmful contaminants, highlighting and discussing the discrepancies that exist in the proposed mechanisms regarding metal ion selectivity. The emerging field of GQD sensors for biorelevant metal ion species will also be reviewed, with a perspective to the future of this highly versatile material.

Synthesis of Fluorescent Sulfur Quantum Dots for Bioimaging and Biosensing

The rapid industrialization has had a serious impact on the environment, leading to an increase in disease and healthcare problems. The development of simple and effective biosensors to achieve specific analyte detection and bioimaging can provide useful information for disease prevention and treatment. Sulfur quantum dots (SQDs), a new class of metal-free fluorescent nanomaterial, are being studied and applied in diagnostic fields such as bioimaging and biosensing due to their advantages of simple synthetic process, unique composition, ultrasmall size, adjustable fluorescence, and low toxicity. This minireview highlights the main synthetic methods to synthesize fluorescent SQDs and their recent progress in cell and tissue imaging, as well as detection of biomolecules, metal ions, and temperature. Finally, the future development and some critical challenges of SQDs as a fluorescent probe in the field of bioimaging and biosensing are also discussed.

Research Update of Emergent Sulfur Quantum Dots in Synthesis and Sensing/Bioimaging Applications

Due to their unique optical property, low toxicity, high hydrophilicity, and low cost, sulfur quantum dots (SQDs), an emerging luminescent nanomaterial, have shown great potential in various application fields, such as sensing, bioimaging, light emitting diode, catalysis, and anti-bacteria. This minireview updates the synthetic methods and sensing/bioimaging applications of SQDs in the last few years, followed by discussion of the potential challenges and prospects in their synthesis and sensing/bioimaging applications, with the purpose to provide some useful information for researchers in this field.