Metal organic framework as “turn-on” fluorescent sensor for Zr(IV) ions and selective adsorbent for organic dyes

Zn-MOF@rGO nanocomposite: a versatile tool for highly selective and sensitive detection of Pb2+ and Cu2+ ions in water

In this work, a hybrid nanocomposite material (PUC2@rGO) was prepared by integrating our previously developed Zn-MOF (PUC2) with reduced graphene oxide (rGO) through the wet impregnation method. The characterization of PUC2@rGO was performed using various analytical techniques, including FTIR, PXRD, FE-SEM, HR-TEM, XPS, zeta potential, and time-resolved FL spectroscopy. Our investigation primarily focused on assessing the composite's capability to detect water pollutants. Notably, PUC2@rGO demonstrated remarkable selectivity and sensitivity towards Pb2+ and Cu2+ ions via fluorescence quenching, exhibiting low detection limits and high quenching constant values. Spectroscopic analysis revealed that electron transfer from PUC2@rGO (donor) to the metal ions (acceptor) resulted in the observed quenching effect induced by Pb2+ and Cu2+ ions. Time-resolved fluorescence studies of PUC2@rGO before and after adding Pb2+ and Cu2+ ions confirmed dynamic quenching, further affirming strong interactions between PUC2@rGO and the targeted metal ions. These findings highlight PUC2@rGO's potential for efficiently detecting heavy metal pollutants in water.

A highly sensitive and specific luminescent MOF determines nitric oxide production and quantifies hydrogen sulfide-mediated inhibition of nitric oxide in living cells

The synthesis of a novel carboxylate-type organic linker-based luminescent MOF (Zn(H₂L) (L₁)) (named PUC2) (H₂L = 2-aminoterephtalic acid, L₁ = 1-(3-aminopropyl) imidazole) is reported by the solvothermal method and comprehensively characterized using single-crystal XRD, PXRD, FTIR, TGA, XPS, FESEM, HRTEM, and BET. PUC2 selectively reacts with nitric oxide (^▪NO) with a detection limit of 0.08 µM, and a quenching constant (0.5 × 10⁴ M^-1) indicating a strong interaction with ^▪NO. PUC2 sensitivity remains unaffected by cellular proteins or biologically relevant metals (Cu²⁺/ Fe³⁺/Mg²⁺/ Na⁺/K⁺/Zn²⁺), RNS/ROS, or H₂S to score ^▪NO in living cells. Lastly, we used PUC2 to demonstrate that H₂S inhibition increases ^▪NO production by ~ 14-30% in various living cells while exogenous H₂S suppresses ^▪NO production, indicating that the modulation of cellular ^▪NO production by H₂S is rather generic and not restricted to a particular cell type. In conclusion, PUC2 can successfully detect ^▪NO production in living cells and environmental samples with considerable potential for its application in improving the understanding of the role of ^▪NO in biological samples and study the inter-relationship between ^▪NO and H₂S.

Synthesis of Ruthenium-Promoted ZnO/SBA-15 Composites for Enhanced Photocatalytic Degradation of Methylene Blue Dye

Synthetic organic pigments like xanthene and azo dyes from the direct discharge of textile effluents are considered colossal global issues and attract the concern of scholars. Photocatalysis continues to be a very valuable pollution control method for industrial wastewater. Incorporations of metal oxide catalysts such as zinc oxide (ZnO) on mesoporous Santa Barbara Armophous-15 (SBA-15) support to improve catalyst thermo-mechanical stability have been comprehensively reported. However, charge separation efficiency and light absorption of ZnO/SBA-15 continue to be limiting its photocatalytic activity. Herein, we report a successful preparation of Ruthenium-induced ZnO/SBA-15 composite via conventional incipient wetness impregnation technique with the aim of boosting the photocatalytic activity of the incorporated ZnO. Physicochemical properties of the SBA-15 support, ZnO/SBA-15, and Ru-ZnO/SBA-15 composites were characterized by X-ray diffraction (XRD), N₂ physisorption isotherms at 77 K, Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDS), and transmission electron microscopy (TEM). The characterization outcomes exhibited that ZnO and ruthenium species have been successfully embedded into SBA-15 support, andtheSBA-15 support maintains its structured hexagonal mesoscopic ordering in both ZnO/SBA-15 and Ru-ZnO/SBA-15 composites. The photocatalytic activity of the composite was assessed through photo-assisted mineralization of aqueous MB solution, and the process was optimized for initial dye concentration and catalyst dosage. 50 mg catalyst exhibited significant degradation efficiency of 97.96% after 120 min, surpassing the efficiencies of 77% and 81% displayed by 10 and 30 mg of the as-synthesized catalyst. The photodegradation rate was found to decrease with an increase in the initial dye concentration. The superior photocatalytic activity of Ru-ZnO/SBA-15 over the binary ZnO/SBA-15 may be attributed to the slower recombination rate of photogenerated charges on the ZnO surface with the addition of ruthenium.

Detection Enhancement of One Multifunctional Cd-Metal-Organic Framework toward Tetracycline Antibiotics by Simply Mixing Eu3+ in Suspension

It is necessary to find more simple methods to improve the detection selectivity and sensitivity of antibiotics. Herein, we constructed a novel three-dimensional (3D) Cd-MOF LCU-117 assembled from p-terphenyl-4,2″,5″,4'-tetracarboxylic acid, which showed a special 3D helical structure with carboxylic acid ligands and nitrogen-containing ligands crossing each other vertically. Luminescence measurements indicated that LCU-117 has high selectivity and sensitivity toward Eu³⁺ through the ratiometric effect. Meanwhile, this complex itself could detect antibiotics oxytetracycline (OTC) through the turn-off mechanism. When Eu³⁺ was added in suspensions of LCU-117 (noted as Eu³⁺@LCU-117), the detection toward OTC was enhanced significantly and visually. The sensing mechanism was investigated in detail by various measurements and theoretical calculations. LCU-117 has a good effect on the logic gate, potential fingerprint detection, and mixed-matrix membranes (MMMs). The practical application for monitoring OTC in water samples also provided a satisfactory result.

A luminescent Zn-MOF for the detection of explosives and development of fingerprints

A luminescent 3D metal-organic framework [Zn(NDA)(AMP)] = PUC1 (where, NDA = naphthalene-2,6-dicarboxylic acid and AMP = 4-aminomethyl pyridine) was synthesized under solvothermal conditions. The synthesized 3D framework was fully characterized with the help of different analytical techniques such as SCXRD, FTIR, TGA, PXRD, SEM, BET, etc. PUC1 exhibited a strong emission peak at 371 nm when excited at 290 nm and the resulting emission was efficiently quenched in the presence of various organic explosive substances like pentaerythritol tetranitrate (PETN), 2,4,6-trinitrophenyl-N-methylnitramine (Tetryl), trinitrotoluene (TNT), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX). PUC1 revealed highly sensitive and selective detection of PETN and Tetryl with high quenching constant values of 0.1 × 10⁶ and 0.12 × 10⁵ M^-1 and low detection limits of 0.315 and 0.404 μM respectively. The strong luminescent properties of PUC1 lead to its successful application in the development of latent fingermarks on different non-porous surfaces using the powder dusting method. The accuracy and applicability of the synthesized material were determined by developing fingerprints by using secretions from eccrine and apocrine glands on a glass slide and various other surfaces, followed by dusting the surfaces. The results so obtained were found to be very accurate and promising.

A reusable fluorescence Eu-based coordination polymer for the detection of Zr4+ ions in aqueous media

A fluorescence coordination polymer [Eu(L)1.5(phen)(H2O)] (1, H2L = 9,10-anthracenedicarboxylic acid) was prepared. 1 represents a fluorescence turn-off sensing material for Zr4+ ions with an excellent detection performance.