Development of a multianalyte electrochemical sensor for depression biomarkers based on a waste of the steel industry for a sustainable and one-step electrode modification

Electrochemical biosensors for depression: Diagnosis and therapeutic monitoring

Electrochemical biosensors have revolutionized the detection of biomarkers related to depression and the quantification of antidepressant drugs. These biosensors leverage nanomaterials and advanced assay designs to achieve high sensitivity and selectivity for clinically relevant analytes. Key neurotransmitters implicated in depression, such as serotonin, dopamine, and glutamate, can be accurately measured via biosensors, providing insights into the effects of antidepressant treatments on neurotransmission. Biosensors can also detect biomarkers of inflammation, oxidative stress, and neuronal health that are altered in depression. Real-time biosensing techniques such as fast-scan cyclic voltammetry enable monitoring of dynamic neurotransmitter changes during depressive episodes and pharmacological interventions. Advancements incorporating graphene, gold nanoparticles, and other nanomaterials have enhanced biosensor performance, enabling the detection of low biomarker concentrations. Closed-loop biosensing systems hold promise for precision medicine by automating antidepressant dosage adjustments on the basis of neurotransmitter levels. A wide range of depression biomarkers, including apolipoprotein A4, heat shock protein 70, brain-derived neurotrophic factor, microRNAs, proteins, and combinatorial biomarker panels, have been detected via sophisticated biosensor platforms. Emerging biosensors show selectivity for antidepressant drugs such as serotonin-norepinephrine reuptake inhibitors, tricyclic antidepressants, and selective serotonin reuptake inhibitors in biological samples. This review emphasizes the transformative potential of electrochemical biosensors in combating depression. By facilitating earlier and more accurate diagnoses, these biosensors can revolutionize patient care and enhance treatment outcomes.

Advances in MXene-Based Electrochemical (Bio)Sensors for Neurotransmitter Detection

Neurotransmitters are chemical messengers that play an important role in the nervous system's control of the body's physiological state and behaviour. Abnormal levels of neurotransmitters are closely associated with some mental disorders. Therefore, accurate analysis of neurotransmitters is of great clinical importance. Electrochemical sensors have shown bright application prospects in the detection of neurotransmitters. In recent years, MXene has been increasingly used to prepare electrode materials for fabricating electrochemical neurotransmitter sensors due to its excellent physicochemical properties. This paper systematically introduces the advances in MXene-based electrochemical (bio)sensors for the detection of neurotransmitters (including dopamine, serotonin, epinephrine, norepinephrine, tyrosine, NO, and H₂S), with a focus on their strategies for improving the electrochemical properties of MXene-based electrode materials, and provides the current challenges and future prospects for MXene-based electrochemical neurotransmitter sensors.

Surface-Activated Pencil Graphite Electrode for Dopamine Sensor Applications: A Critical Review

Pencil graphite electrode (PGE) is an alternative, commercially available, ready-to-use, screen-printed electrode for a wide range of electroanalytical applications. Due to the complex-matrix composition and unpredictable electro-inactive nature of PGE in its native form, a surface pre-treatment/activation procedure is highly preferred for using it as an electroactive working electrode for electroanalytical applications. In this article, we review various surface pre-treatment and modification procedures adopted in the literature with respect to the sensitive and selective detection of dopamine as a model system. Specific generation of the carbon-oxygen functional group, along with partial surface exfoliation of PGE, has been referred to as a key step for the activation. Based on the Scopus^® index, the literature collection was searched with the keywords "pencil and dopamine". The obtained data were segregated into three main headings as: (i) electrochemically pre-treated PGE; (ii) polymer-modified PGEs; and (iii) metal and metal nanocomposite-modified PGE. This critical review covers various surface activation procedures adopted for the activation for PGE suitable for dopamine electroanalytical application.

Theoretical and Cyclic Voltammetric Analysis of Asparagine and Glutamine Electrocatalytic Activities for Dopamine Sensing Applications

The molecular dynamics and density functional theory (DFT) can be applied to discriminate electrocatalyst’s electron transfer (ET) properties. It will be interesting to discriminate the ET properties of green electrocatalysts such as amino acids. Here, we have used DFT to compare the electrocatalytic abilities of asparagine and glutamine at the carbon paste electrode interface. Cyclic voltammetric results reveal that the electrocatalytic activities of aspargine are higher than glutamine for dopamine sensing. Dopamine requires less energy to bind with asparagine when compared to glutamine. Additionally, asparagine has higher electron-donating and accepting powers. Therefore, asparagine has a higher electrocatalytic activity than glutamine—the ability for the asparagine and glutamine carbon electrodes to detect dopamine in commercial injection, and to obtain satisfactory results. As a part of the work, we have also studied dopamine interaction with the modified carbon surface using molecular dynamics.

Ratiometric electrochemical sensing platform based on N-doped MOF-derived CoNi/C for the determination of p-phenylenediamine in hair dyes

A stable ratiometric electrochemical sensing platform is introduced for the determination of p-phenylenediamine (PPD). Specifically, the proposed sensing platform employs nitrogen-doped MOF pyrolysis-derived CoNi/C (N-CoNi/C) which was deployed as the sensing agent and methylene blue (MB) as the internal reference, and the MB combined with N-CoNi/C nanomaterials by a simple immersion adsorption process. Full characterization of N-CoNi/C was carried out with respect to morphology, composition, and electrochemical behavior, and the sensing performance of the ratiometric electrochemical sensing platform was evaluated. Complete separation of the oxidation peaks of PPD and MB was achieved using the MB/N-CoNi/C composite modified glassy carbon electrode (MB/N-CoNi/C/GCE) and their ratio signals were used for quantitative determination of PPD. The electrical signal was linearly related to the concentration of PPD in the concentration range 0.3-100 μM, with a fitted correlation coefficient of 0.9987 and a detection limit of 0.091 μM (S/N = 3). Additionally, the sensor has been successfully used for the determination of PPD in commercial hair dyes with a recovery rate of over 95%.

Ultrasensitive Determination of Natural Flavonoid Rutin Using an Electrochemical Sensor Based on Metal-Organic Framework CAU-1/Acidified Carbon Nanotubes Composites

Rutin, a natural flavonol glycoside, is widely present in plants and foods, such as black tea and wheat tea. The antioxidant and anti-inflammatory effects of flavonoids are well known. In this study, a new electrochemical rutin sensor was developed using multiwalled carbon nanotubes/aluminum-based metal-organic frameworks (MWCNT/CAU-1) (CAU-1, a type of Al-MOF) as the electrode modification material. The suspension of multiwalled carbon tubes was dropped on the surface of the GCE electrode to make MWCNT/GCEs, and CAU-1 was then attached to the electrode surface by electrodeposition. MWCNTs and CAU-1 were characterized using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Due to the synergistic effect of CAU-1 and MWCNT-COOH, the prepared sensor showed an ultrasensitive electrochemical response to rutin. Under optimized conditions, the sensor showed a linear relationship between 1.0 × 10^-9~3.0 × 10^-6 M with a detection limit of 6.7 × 10^-10 M (S/N = 3). The sensor also showed satisfactory stability and accuracy in the detection of real samples.

Simple Preparation and Characterization of Hierarchical Flower-like NiCo2O4 Nanoplates: Applications for Sunset Yellow Electrochemical Analysis

The current work was performed to construct a novel electrochemical sensing system for determination of sunset yellow via the modification of screen-printed graphite electrode modified with hierarchical flower-like NiCo₂O₄ nanoplates (NiCo₂O₄/SPGE). The prepared material (hierarchical flower-like NiCo₂O₄ nanoplates) was analyzed by diverse microscopic and spectroscopic approaches for the crystallinity, composition, and morphology. Chronoamperometry, differential pulse voltammetry, linear sweep voltammetry, and cyclic voltammetry were used for determination of the electrochemical behavior of sunset yellow. The as-fabricated sensor had appreciable electro-catalytic performance and current sensitivity in detecting the sunset yellow. There were some advantages for NiCo₂O₄/SPGE under the optimized circumstances of sunset yellow determination, including a broad dynamic linear between 0.02 and 145.0 µM, high sensitivity of 0.67 μA/(μM.cm²), and a narrow limit of detection of 0.008 μM. The practical applicability of the proposed sensor was verified by determining the sunset yellow in real matrices, with satisfactory recoveries.

Nanomaterials-based electrochemical sensors for the detection of natural antioxidants in food and biological samples: research progress

Antioxidants are healthy substances that are beneficial to the human body and exist mainly in natural and synthetic forms. Among many kinds of antioxidants, the natural antioxidants have great applications in many fields such as food chemistry, medical care, and clinical application. In recent years, many efforts have been made for the determination of natural antioxidants. Nano-electrochemical sensors combining electrochemistry and nanotechnology have been widely used in the determination of natural antioxidants due to their unique advantages. Therefore, a large number of nanomaterials such as metal oxide, carbon materials, and conducting polymer have attracted much attention in the field of electrochemical sensors due to their good catalytic effect and stable performance. This review mainly introduces the construction of electrochemical sensors based on different nanomaterials, such as metallic nanomaterials, metal oxide nanomaterials, carbon nanomaterials, metal-organic frameworks, polymer nanomaterials, and other nanocomposites, and their application to the detection of natural antioxidants, including ascorbic acid, phenolic acids, flavonoid, tryptophan, citric acid, and other natural antioxidants. In the end, the limitations of the existing nano-sensing technology, the latest development trend, and the application prospect for various natural antioxidant substances are summarized and analyzed. We expect that this review will be helpful to researchers engaged in electrochemical sensors.

Analytical Performance of Clay Paste Electrode and Graphene Paste Electrode-Comparative Study

The analytical performance of the clay paste electrode and graphene paste electrode was compared using square wave voltammetry (SWV) and cyclic voltammetry (CV). The comparison was made on the basis of a paracetamol (PA) determination on both working electrodes. The influence of pH and SWV parameters was investigated. The linear concentration ranges were found to be 6.0 × 10^-7-3.0 × 10^-5 and 2.0 × 10^-6-8.0 × 10^-5 mol L^-1 for clay paste electrode (ClPE) and graphene paste electrode (GrPE), respectively. The detection and quantification limits were calculated as 1.4 × 10^-7 and 4.7 ×10^-7 mol L^-1 for ClPE and 3.7 × 10^-7 and 1.2 × 10^-6 mol L^-1 for GrPE, respectively. Developed methods were successfully applied to pharmaceutical formulations analyses. Scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to characterize ClPE and GrPE surfaces. Clay composition was examined with wavelength dispersive X-ray (WDXRF).