Rapid sonochemical synthesis of copper nanoclusters with red fluorescence for highly sensitive detection of silver ions

Synthesis of novel phenylalanine-coated copper nanoclusters for fluorescent probes to determine the interactions of cancer drugs with DNA

Abiraterone acetate (ATA) is an FDA-approved prodrug that exerts its effects by irreversibly inhibiting the enzymatic activities of 17α-hydroxylase and C17,20-lyase, which are responsible for testosterone production, particularly. Drug-DNA interaction studies are conducted using various methods. In this study, CuNCs were used as a fluorescent probe for the first time to investigate drug-DNA interactions. Additionally, a new synthesis was developed for copper nanoclusters coated with phenylalanine (Phe). Ascorbic acid served as the reducing agent, while Phe was used as a surface functionalizing and stabilizing agent. Phe/CuNCs were characterized using various techniques including TEM, DLS, XPS, UV-Vis spectroscopy, and fluorescence spectroscopy. Optimization studies were conducted for synthesis parameters such as ascorbic acid concentration, Phe concentration, incubation time, and incubation temperature. This new synthesis method offers various advantages such as easy synthesis procedure, short synthesis time, and compatibility with green chemistry principles. Phe/CuNCs were used as a fluorescent probe for ATA-DNA interactions. The binding constant (Ka) between ATA and DNA was calculated as 1.03 × 104. Furthermore, thermodynamic studies indicated that the effective forces involved in ATA-DNA interaction are Van der Waals and hydrogen bonding.

Ligand-Induced Red-Emitting Copper Nanoclusters for Selective Fluorescence Determination of Aluminum Ions

Monitoring levels of excessive aluminum ions (Al3+) is crucial as it can harm the immune system, reduce enzyme activity, cause cell death, and damage environmental and biological systems. Developing a fast and efficient Al3+ ion determination method is the key to addressing this issue. In this work, red-emitting fluorescent copper nanoclusters (CuNCs) were synthesized using N-acetyl-l-cysteine (NAC) as a ligand and CuCl2·2H2O through a facile procedure. The NAC-CuNCs exhibited a large Stokes shift and displayed remarkable luminescence properties. A method for detecting Al3+ through a fluorescence probe was proposed. Its fluorescence mechanism was also explored. The probe showed rapid responsiveness (within 1 min) to Al3+ ion determination. The detection limit for Al3+ was found to be 19.7 nM, which is significantly lower than the WHO's value and most reports, with a linear range of 0-52.9 μM. The determination of Al3+ concentrations in actual water using the fluorescence probe yielded satisfactory outcomes. Moreover, the visual detection of Al3+ ions was also achieved through a smartphone, which can enhance its fast and practical detection.

Sensitive Detections of Sodium Dichloroisocyanurate and Rosmarinic Acid by Polyvinylpyrrolidone Coated Copper Nanoclusters

In this article, the water-soluble blue-light-emitting copper nanoclusters (CuNCs) were prepared by polyvinylpyrrolidone (PVP) and ascorbic acid as templating and reducing agents, respectively. The optimization of synthesis conditions of PVP-CuNCs were studied and analyzed. And the quantum yield of the PVP-CuNCs was calculated to be 14.97%. It had good specificity and exceptionally sensitive detection for sodium dichloroisocyanurate (DCCNa)/rosmarinic acid (RA), with a linear response range of 0.030-2.400/0.030-0.900 μM and corresponding LOD value of 10.766/8.985 nM. Moreover, the fluorescent reaction mechanisms of the PVP-CuNCs-DCCNa and PVP-CuNCs-DCCNa-RA systems were discussed, and the sensing probe could be effectively used for the assays of DCCNa and RA in genuine samples, whose results were acceptable.

The Preparation of Golgi Apparatus-Targeted Polymer Dots Encapsulated with Carbon Nanodots of Bright Near-Infrared Fluorescence for Long-Term Bioimaging

As a vital organelle in eukaryotic cells, the Golgi apparatus is responsible for processing and transporting proteins in cells. Precisely monitoring the status of the Golgi apparatus with targeted fluorescence imaging technology is of enormous importance but remains a dramatically challenging task. In this study, we demonstrate the construction of the first Golgi apparatus-targeted near-infrared (NIR) fluorescent nanoprobe, termed Golgi-Pdots. As a starting point of our investigation, hydrophobic carbon nanodots (CNDs) with bright NIR fluorescence at 674 nm (fluorescence quantum yield: 12.18%), a narrow emission band of 23 nm, and excellent stability were easily prepared from Magnolia Denudata flowers using an ultrasonic method. Incorporating the CNDs into a polymer matrix modified with Golgi-targeting molecules allowed for the production of the water-soluble Golgi-Pdots, which showed high colloidal stability and similar optical properties compared with pristine CNDs. Further studies revealed that the Golgi-Pdots showed good biocompatibility and Golgi apparatus-targeting capability. Based on these fascinating merits, utilizing Golgi-Pdots for the long-term tracking of the Golgi apparatus inside live cells was immensely successful.

The colorimetry and smartphone determination of perfluorooctane sulfonate based on cytidine 5'-monophosphate-capped gold nanoclusters with peroxidase-like activity

Besides being a luminescent material, cytidine 5'-monophosphate-capped gold nanoclusters (AuNCs@CMP) also show superior peroxidase-like activity which can promote TMB oxidation in the presence of H₂O₂, causing the solution to turn efficiently from pale to blue. However, the presence of perfluorooctane sulfonate (PFOS) in the above system inhibited TMB oxidation and bluing of the solution, consequently establishing a colorimetric platform of AuNCs/H₂O₂/TMB for PFOS determination. The results showed that it responded to PFOS over a wide range of 2.0-50 μM, with a limit of detection (LOD) as low as 150 nM. Furthermore, in-depth mechanism investigation revealed that, rather than the active site of the catalyst being occupied by PFOS, such a hypochromatic effect originated from depletion of the reactive oxygen species (ROS) by PFOS degradation, thereby also offering a unique strategy to scavenge the lethal toxicity of PFOS. In addition, the colorimetric response of AuNCs/H₂O₂/TMB to PFOS was extended to smartphone determination conveniently based on RGB values. Finally, the established platform was applied to PFOS determination both in soil extracts and in tap water with good recovery, which supplies a novel colorimetric platform for visual determination of PFOS in practice. The method has the advantages of being rapid, sensitive and highly selective, which highlight the design and construction of more systems for determination and elimination of lethal pollutants in environmental water.

Preparation of blue fluorescent copper nanoclusters for sensitive and selective sensing of apigenin in pharmaceutical samples

One-pot means was performed for the rapid preparation of copper nanoclusters (Cu NCs), which were employed as a fluorescence system for the sensitive apigenin measurement in pharmaceutical samples. Herein, CuCl₂ aqueous solution was reduced to Cu NCs through ascorbic acid and the Cu NCs were protected through trypsin under 65 ℃ for 4 h. The entire preparation process was rapid, facile and environmentally friendly. The trypsin-capped Cu NCs were demonstrated through ultraviolet-visible spectroscopy, fluorescence spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and fluorescence lifetime, respectively. The Cu NCs revealed blue fluorescence with emission wavelength around 465 nm under the excitation wavelength of 380 nm. The fluorescence weakening feature of Cu NCs with apigenin was observed. On this basis, a facile and sensitive turn-off fluorescent nanoprobe for the sensing of apigenin in real samples was developed. The logarithm of relative fluorescence intensity revealed a good linear relationship with apigenin contents from 0.5 μM to 300 μM with the detection limit of 0.079 μM. The Cu NCs-based fluorescent nanosensor have been employed to measure the apigenin amounts in real samples such as medical saline, bovine and human serum. The results revealed excellent potential of this Cu NCs-based fluorescent nanoprobe for the convention computation of apigenin amounts in real samples.

Synergism of Photo-Induced Electron Transfer and Aggregation-Induced Quenching Mechanisms for Highly Sensitive Detection of Silver Ion and Captopril

Carbon-based nanoprobes, with excellent physicochemical performance and biocompatibility, are a kind of ideal nanomaterial for biosensing. Herein, we designed and prepared novel oxygen-doped nitrogen-enrichment carbon nanoribbons (ONCNs) with an excellent optical performance and uniform morphology, which could be used as a dual-mode fluorescence probe for the detection of Ag⁺ ion and captopril (Ctl) based on the synergism of photo-induced electron transfer and aggregation-induced quenching mechanisms. By recording the changes in fluorescent intensities of ONCNs, the Ag⁺ ion and Ctl concentrations can be easily tested in real samples. The results displayed that two good linear relationships existed between the change in fluorescent intensity of ONCNs and the concentrations of Ag⁺ ion and Ctl in the ranges of 3 μM to 30 μM and 1 μM to 30 μM, with the detection limit of 0.78 µM and 74 nM, respectively. The proposed sensing platform has also been successfully applied for the Ctl analysis in commercial tablet samples based on its high selectivity, proving its value in practical applications.

A ratiometric fluorescent nanoprobe based on CdSe quantum dots for the detection of Ag+ in environmental samples and living cells

With the widespread application of Ag⁺ in modern life and industry, the potential hazardous effects of Ag⁺ to environment and humans have attracted great concerns. Thus, effective and rapid strategies for Ag⁺ detection are highly desirable. In this paper, a novel ratiometric fluorescence sensor using CdSe quantum dots (QDs) has been constructed for sensitive and selective detection of Ag⁺, which is based on the formation of Ag₂Se QDs. CdSe QDs were initially prepared and showed single wavelength emission at 510 nm. When Ag⁺ exists, a rising peak appeared at 650 nm and the emission at 510 nm declined, exhibiting distinct ratiometric fluorescence emission (I₆₅₀/I₅₁₀) characteristic with a linear response over the Ag⁺ concentration range of 0.01-4 μM. Significantly, the fluorescence changed from green to red. The detection limit of the constructed sensor is 1.4 nM. Furthermore, the sensing assay can be successfully applied to detect Ag⁺ in real water samples and living cells.

A highly selective fluorescent sensor for chlortetracycline based on histidine-templated copper nanoclusters

In this study, histidine-protected copper nanoclusters (Cu NCs@His) were established by using a one-pot method, which histidine and ascorbic acid were applied as the template and reducing agent, respectively. The as-developed Cu NCs@His endued green emission wavelength at 494 nm with the excitation of 378 nm. The Cu NCs@His exhibited green fluorescence under UV light (365 nm). Using Cu NCs@His as a pattern nanosensor, the fluorescent "turn off" mechanism was fabricated for the determination of chlortetracycline in the light of the linear decrease of fluorescence intensities around 494 nm. The chlortetracycline conducted as a quencher, leading to reveal an excellent linear relationship between ln(F₀/F) of Cu NCs@His and chlortetracycline concentrations with the range of 0.5-200 μM, and the detection limit was 0.876 μM. The fluorescence quenching of Cu NCs@His revealed excellent selectivity for chlortetracycline over other potential interfering substances in the human body. This strategy was exhibited to be a convenient sensing platform for the detection of chlortetracycline in real medical samples, which could unfold a brand new and direct system for the sensing of chlortetracycline in real samples.

Effect of Reducing Agent on Characteristics and Antibacterial Activity of Copper-Containing Particles in Textile Materials

Textile materials modified with copper-containing particles have antibacterial and antiviral properties that have prospects for use in healthcare. In the study, textile materials were saturated with copper-containing particles in their entire material volume by the absorption/diffusion method. The antibacterial properties of modified textile materials were confirmed by their inhibitory effect on Staphylococcus aureus, a Gram-positive bacterium that spreads predominantly through the respiratory tract. For the modification, ordinary textile materials of various origins and fiber structures were used. Technological conditions and compositions of modifying solutions were established, as well as the most suitable textile materials for modification. To assess the morphological and physical characteristics of copper-containing particles and the textile materials themselves, X-ray diffraction, a scanning electron microscope, and an energy-dispersive X-ray spectrum were used. In modified textile samples, XRD data showed the presence of crystalline phases of copper (Cu) and copper (I) oxide (Cu2O). On the grounds of the SEM/EDS analysis, the saturation of textile materials with copper-containing particles depends on the structure of the textile materials and the origins of the fibers included in their composition, as well as the modification conditions and the copper precursor.