Fluorescent sensing (Cu2+ and pH) and visualization of latent fingerprints using an AIE-active naphthaldehyde-pyridoxal conjugated Schiff base

Aggregation-induced emission(AIE)for next-generation biosensing and imaging: A review

Luminescence technology is a powerful analytical tool for biomedical research as well as for marker detection. Luminescent materials with aggregation-induced emission (AIE) properties have attracted extensive research interest, and their unique luminescence characteristics, biocompatibility, and sensitivity make them useful for the development of fluorescence-turn-on biosensors with superior sensitivity. While numerous reviews have focused on the design of AIEgens, comprehensive summaries on the strategies for biosensor preparation and application fields remain limited. In this review, we provide a concise introduction to the discovery and mechanism of the AIE phenomenon and summarize the working principles of classic AIE molecules. We discuss luminescence tuning strategies and functionalization methods for AIEgens, along with the design and preparation of AIE-based biosensors. Typical applications of AIE in biosensing and imaging are outlined, and we analyze the current limitations and future research directions of AIE technology in these fields. We hope this review will serve as a valuable reference for researchers in this rapidly developing field. The insights provided may facilitate the rational design of next-generation biosensors based on AIE technology, exhibiting promising avenues of biomedical applications and vast potential for growth.

Aminothiophenol and 7-diethylamino-4-hydroxycoumarin derived probe for reversible turn off-on-off detection of Cu2+ ions and cysteine

Here, we present a simple disulfide linked probe HTP for rapid detection of Cu2+ ions, which was prepared by a condensation reaction between 7-diethylamino-4-hydroxycoumarin aldehyde and 2-aminothiophenol. The disulfide linked probe HTP was characterized using 1H NMR, 13C NMR, and HRMS spectroscopic analysis and confirmed by single crystal X-ray diffraction analysis. The photophysical behavior of HTP in various solvents (non-polar to polar) was studied and HTP displayed aggregation induced emission (AIE) characteristics in CH3CN-water mixtures (0-99 %). Upon binding with Cu2+ ions, emission enhancement occurs along with color changes from weak green to intense yellow emission in CH3CN/Tris-HCl buffer (20 μM, 9:1, 10 mM Tris HCl Buffer, pH = 7.4). Detection limit for Cu2+ ions was found to be 0.97 nM which is lower than the recommended tolerance limit by the WHO and the association constant 0.42 × 108 M-1 was obtained using B-H plot. Furthermore, the stoichiometric ratio 1:1 was confirmed by Job's plot, 1H NMR, mass spectral analysis and DFT calculations were supported the formation of HTP-Cu2+ complex. The reversibility of HTP with Cu2+ ions was achieved by cysteine with detection limit and association constant value of 1.64 µM and 0.15 × 107 M-1 respectively. The reversible sensing nature of HTP with Cu2+/cysteine was further applied for constructing a molecular logic gate (INHIBIT) and practical applications such as paper strips, cotton swabs and real water analysis.

Chalcone derived bis-organosilane and its magnetic nanoparticles: Unveiling precision in selective Cu(II) ion detection and elucidating biocompatibility

The escalating concern regarding the adverse effects of metal ion toxicity on both human health and environmental ecosystems necessitates the development of efficient detection methodologies. This study presents a focused investigation on the selective and sensitive detection of Cu(II) ions employing hybrid magnetic nanoparticles derived from chalcone-based bis-organosilane. These nanoparticles exhibit a notably low detection limit in the nano-scale range, rendering the sensor highly sensitive to Copper(II) ion detection while maintaining robust anti-interference capabilities, even in the presence of diverse metal ions. Real sample analysis confirms the sensor's efficacy in detecting Cu(II) ions below WHO-prescribed levels. Computational analyses reveal molecular interactions and biological activities, including potent antibacterial and antioxidant properties, suggesting promising applications. Furthermore, the biological effectiveness of chalcone-derived bis-organosilane is investigated, unveiling notable antibacterial efficacy and also exhibiting potential as a scavenger of free radicals, indicating promising applications in both antibacterial and antioxidant domains.

A simple turn-off fluorescent chemosensor based on a Schiff base structure for ultrafast and highly selective trace detection of Cu2+ ions in aqueous solutions

A simple turn-off fluorescent probe, 5-(diethylamino)-2-(hydrazonomethyl)phenol (DHP), is designed and synthesized for the sensitive and selective detection of Cu2+. The bright green fluorescence of DHP is quenched after the addition of Cu2+. The probe DHP exhibits good anti-interference performance against Cu2+ in the presence of multiple metal ions. The fluorescence intensity of DHP (10 μM) at 522 nm is well linearized with the Cu2+ concentration at 0-5 μM, and it has a detection limit of 0.29 nM (R2 = 0.9949). The complexation ratio of the probe DHP to Cu2+ is 2 : 1 and the complexation constant is 3.44 × 104 M-1 (R2 = 0.9974). In addition, the probe DHP can be recovered using EDTA and Cu2+ can be effectively monitored at pH 5-11, with good results in dipstick experiments and actual water samples. HepG-2 cells remained viable in excess of 90% after being exposed to DHP (50 μM) for 24 h, which demonstrates the extremely low toxicity of DHP, and it can be used for in vivo cell imaging.

4,4'-Sulfonyldianiline Derived Aggregation-Induced Emission Luminogen for the Detection of Ofloxacin

The excessive use of antibiotic ofloxacin (Oflx) can cause serious detrimental effects to human health. Therefore, the utmost research priority is required to develop facile methods to detect Oflx. Herein, a V-shaped aggregation-induced emission (AIE) active Schiff base SDANA was introduced for the fluorescent turn-on detection of Oflx. The Schiff base SDANA was synthesized by condensing 4,4'-sulfonyldianiline with two equivalents of 2-hydroxy-1-naphthaldehyde. The nearly non-fluorescent SDANA in DMSO showed strong orange emission with the increase in HEPES buffer (H2O, 10 mM, pH 7.4) fractions in DMSO from 70 %-95 % due to the combined effects of AIE and ESIPT. The DLS and SEM analyses were performed to complement the formation of self-aggregates of SDANA. With the addition of Oflx, the fluorescence emission of AIE luminogen (AIEgen) SDANA (λem=575 nm, λex=400 nm) was blue-shifted and enhanced at 530 nm. The interactions of Oflx over the surface of SDANA aggregates disrupted the intramolecular charge transfer and aggregation morphology of SDANA, which gave a distinct fluorescence response to detect Oflx. The detection limit for Oflx was estimated as 0.81 μM, and the developed probe AIEgen SDANA was applied for the quantification of Oflx in human blood serum.

Aggregation-induced emission luminogens for latent fingerprint detection

For over a century, fingerprints have served as a pivotal tool for identification of individuals owing to their enduring characteristics and easily apparent features, particularly in the realm of criminal investigations. Latent fingerprints (LFPs) are "invisible fingerprints" that are most commonly available at crime scenes and require a rapid, selective, sensitive, and convenient method for detection. However, existing fingerprint development techniques harbour limitations, prompting the exploration of novel approaches that prioritize investigator safety and environmental sustainability. Leveraging the unique photophysical properties of aggregation-induced emission luminogens (AIEgens) has emerged as a promising strategy for on-site analysis of LFP visualization. In this highlight, we have presented a comparative analysis of various AIEgens (organic compounds, metal complexes, nanoparticles, and polymers) for the development and detection of LFPs. Through this examination, insights into the efficiency and potential applications of AIE-based fingerprint development techniques are provided. In addition, several strategies have been proposed for circumventing the limitations of existing AIEgens. We hope that this highlight article will encourage more researchers to investigate AIEgens in LFP detection, contributing to forensic science.

Improving Copper(II) Sensitivity by Combined use of AIEE Active and Inactive Schiff Bases

An aggregation-induced emission enhancement (AIEE) active Schiff base PNN was synthesized by condensing benzidine with 2-hydroxynaphthaldehyde. The green-fluorescent PNN (λem = 510 nm) in DMF turned to yellow-fluorescent PNN (λem = 557 nm) upon increasing the fractions of HEPES buffer (10 mM, pH 7.4) above 40%. The DLS study supports the self-aggregation of PNN that restricts the intramolecular rotation and activates the excited-state intramolecular proton transfer (ESIPT) process. The fluorescence emission of AIEE active PNN was quenched by Cu2+ with an estimated detection limit of 2.1 µM. Interestingly, the detection limit of PNN towards Cu2+ was improved in the presence of an AIEE inactive Schiff base PBPM obtained by reacting 1,4-diaminobenzene with pyridine-4-carbaldehyde. The mixed PNN-PBPM showed a detection limit of 0.49 µM. The practical utility of PNN-PBPM was validated by quantifying Cu2+ ions in real environmental water samples and green tea.

Aggregation-induced Emission Active Naphthalimide Derived Schiff Base for Detecting Cu2+ and Its Applications

Herein, an aggregation-induced emission (AIE) active Schiff base (NHS) was synthesized by condensing naphthalimide hydrazide with salicylaldehyde. The non-fluorescent solution of NHS in DMSO turned to emissive NHS upon increasing the HEPES fraction in DMSO from 70 to 95%. The UV-Vis absorption and DLS studies supported the self-aggregation of NHS that restricted the intramolecular rotation and activated the ESIPT process. The blue fluorescence of AIE luminogen NHS in DMSO:HEPES (5:95, v/v, pH = 7.4) was examined by adding different metal ions (Al3+, Ca2+, Cd2+, Co2+, Cu2+, Cr2+, Fe2+, Fe3+, Hg2+, Mg2+, Mn2+, Ni2+, Pb2+ and Zn2+). NHS showed a selective fluorescence switch-off response for Cu2+ due to the chelation enhancement quenching effect (CHEQ). The quenching of NHS by Cu2+ was explored by using density functional theory (DFT) and Stern-Volmer plot. The practical utility of NHS was examined by quantitative and qualitative analysis of Cu2+ in real water samples.

A novel carbazole-based fluorometric and colorimetric sensor for the highly sensitive and specific detection of Cu2+ in aqueous solution

Based on the typical Suzuki coupling reaction and Schiff base reaction, a novel fluorescent molecular PCBW is synthesized and applied as a fluorescence and colorimetric sensor to detect Cu2+ in aqueous solution. The PCBW sensor presents the aggregation-caused quenching (ACQ) effect and at 1 × 10-5 mol L-1 it emits the strongest turquoise fluorescence in the DMSO-H2O system (fw = 40%). The sensor exhibits a 'turn-off' fluorescent characteristic by adding Cu2+, and its fluorescent intensity shows a reliable linear relationship with the Cu2+ concentration in the range of 0-6 × 10-6 mol L-1, with a detection limit of 1.19 × 10-8 mol L-1. Meanwhile, the PCBW sensor also exhibits the colorimetric sensing from colorless to light yellow. The sensor has good selectivity and anti-interference and its pH application range can be extended from 5 to 10. The intramolecular charge transfer (ICT) is speculated as the main fluorescence mechanism of PCBW. In addition, the sensor presents good reusability and is practicable to detect Cu2+ in diverse aqueous samples.

Fluorescence Sensing of pH and p-Nitrophenol Using an AIEE Active Pyridoxal Derived Schiff Base

An easy-to-prepare aggregation-induced emission enhancement (AIEE) active Schiff base NPY was synthesized by condensing vitamin B6 cofactor pyridoxal with 3-hydroxy-2-naphthoic hydrazide, and employed for the fluorescent sensing of pH and p-nitrophenol (p-NP). The AIEE phenomenon of NPY was investigated in mixed DMSO/H2O medium. The weakly yellow-fluorescent NPY (λem = 535 nm) in pure DMSO turned to a bright cyan-fluorescent NPY (λem = 490 nm) upon addition of poor solvent water. The DLS and SEM analyses supported the self-aggregation of NPY that restricted the intramolecular rotation and activated the excited state intramolecular proton transfer (ESIPT) process. The AIEE luminogen (AIEEgen) NPY containing 90% of water fraction (fwater) was employed for the fluorescent sensing of pH. AIEEgen NPY displays three distinct fluorescent pH windows: non-fluorescent below pH 3.0 and above pH 10.0, cyan fluorescent between pH 3.0 to 8.0, and yellow fluorescent between pH 8.0 to 10.0. AIEEgen NPY was also applied for the detection of nitroaromatics in HEPES buffer (10% DMSO, 10 mM, pH 7.0). The addition of p-NP selectively quenched the fluorescent intensity of AIEEgen NPY with an estimated detection limit of 1.73 µM. The analytical utility of AIEEgen NPY was examined by quantifying p-NP in different real water samples.

High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Creation of AIEgens with high brightness is compactly related to acquiring optimum AIE capabilities and still faces challenges. This study proposes an ingenious structurally regulative approach for preparing ultrabright AIEgens, taking iridium complexes as the model. The incremental rotational activity of substituents obtained by fine adjustment of the stereoscopic configuration efficaciously activates the AIE of iridium complexes and synchronously imparts high-brightness luminescence. Subsequently, benefitting from the ultrabright AIE, high-resolution visualization of latent fingerprints (LFPs) is achieved on diverse substrates by transient immersion in a solution of the AIE-active iridium complex (Ir3) for 60 s. The LFPs stained by Ir3 are integral and distinct enough to possess level 1-3 detail features, which allow precisely realizing personal identification. The LFP photograph emerges inconspicuous attenuation of contrast when aged under ambient light for 10 days and then being continuously irradiated with high-power ultraviolet light for 1 h, reflecting extraordinary aging resistance. Notably, the ultrabright AIE of Ir3 with room-temperature phosphorescence feature successfully achieves enhanced visualization of local fingerprint details with ultrahigh contrast. This LFP visualization protocol based on the ultrabright AIEgens is practical and provides a reliable solution for forensic investigations in actual scenarios.

Natural protoberberine alkaloid-montmorillonite nanocomposite powders with AIE features for visualizing high-resolution latent fingerprints

Real-time and in-situ fluorescence visualization technologies have attention to in the forensic analysis of latent fingerprints (LFPs). The fingerprint powders with high performance and biocompatibility are essential for imaging LFPs with high definition and safety. In this work, five quaternary protoberberine alkaloid (QPA) derivatives were analyzed with reorganization energy and four-point calculations to explain the relationship between the substituent effect and luminescent properties and further resolve the luminous behaviors of four QPA-based natural products in solution. Thanks to the restriction of the intramolecular motions mechanism, aggregation-induced emission (AIE) active BBC nanoaggregates could sensitively detect explosive analog, 2,4,6-trinitrophenol, at a nanomolar level (9.8 nM of detection limit). Combined with natural montmorillonite (MMT) mineral powders, three levels of details for fingerprints were successfully imaged with solid-luminous BBC/MMT nanocomposites. The insight into the substituted effect of alkoxy groups on the QPA framework not only provides a new concept to design rotor-free AIE luminogens but also expands natural products and their nanocomposites into LFP and detection applications.

Bis-triazole linked organosilane based sensing platform for Cu2+ ions and insilico tyrosinase inhibitor activity

The development of a ligand for their selective and sensitive detection is required due to the widespread use of Cu²⁺ in many industrial processes and the potential threat to human health. Herein, we report a bis-triazole linked organosilane (5) derived from the Cu(I) catalyzed azide-alkyne cycloaddition reaction. The synthesized compound 5 was characterized by (¹H and ¹³C) NMR spectroscopic and mass spectrometry techniques. The UV-Visible and Fluorescence experiments of the designed compound 5 were performed with various metal ions, revealing its high selectivity and sensitivity to Cu²⁺ ions in MeOH: H₂O (8:2, v/v, pH = 7.0, PBS buffer) solution. The selective fluorescence quenching upon addition of Cu²⁺ to the compound 5 is due to Photo-induced electron transfer process (PET). The limit of detection of compound 5 to Cu²⁺ was calculated as 2.56 × 10^-6 M and 4.36 × 10^-7 M through UV-Visible and Fluorescence titration data, respectively. The possible mechanism of 1:1 binding of 5 with Cu²⁺ could be affirmed by the density functional theory (DFT). Further, it was found that compound 5 showed a reversible behavior towards Cu²⁺ ions by the accumulation of sodium salt of CH₃COO^- which can be used in the construction of molecular logic gate where Cu²⁺ and CH₃COO^- are considered as inputs and the absorbance at 260 nm as output. Moreover, the molecular docking studies provide useful information about compound 5's interaction with the tyrosinase enzyme (PDB ID- 2Y9X).

Pyridoxal Derived AIEgen for Fluorescence Turn-off Sensing of Cu2+ and Fe2+ Ions and Fluorescence Imaging of Latent Fingerprints

Schiff base 4-((E)-((E)-(2-hydroxybenzylidene)hydrazono)methyl)-5-(hydroxymethyl)-2-methylpyridin-3-ol (HSP) was synthesized by condensing vitamin B₆ cofactor pyridoxal with salicylaldehyde hydrazone, and characterized by standard spectroscopic techniques (FT-IR, ¹H NMR, ¹³C NMR, and ESI-MS). The solution of HSP in DMSO/HEPES (10 mM, pH = 7.4) mixed solvents with varying HEPES fractions (f_w) from 0 to 95% showed aggregation-induced emission (AIE). The AIE active HSP in 95% HEPES gave intense fluorescent emission at 570 nm was employed for the detection of metal ions. The fluorescence of HSP was quenched upon adding Cu²⁺ and Fe²⁺ ions. The association constant (K_a) of the Schiff base HSP with Cu²⁺ and Fe²⁺ ions was estimated as 4.08 × 10⁵ M^-1 and 1.23 × 10⁵ M^-1, respectively by using the online analysis tool BindFit v0.5. The HSP showed the detection limit down to 1.75 µM and 1.89 µM for Cu²⁺ and Fe²⁺ ions, respectively. Further, the aggregates of HSP were applied to visualize latent fingerprints (LFPs) over a non-porous glass slide.

'AIE + ESIPT' Active 2-hydroxy-naphthalene Hydrazone for the Fluorescence Turn-on Sensing of Al3

The aggregation-induced emission (AIE) behaviour of an easy-to-prepare Schiff base 2-hydroxy-naphthalene hydrazone (L) was explored in mixed DMSO/HEPES medium by selecting DMSO as a good solvent, whereas HEPES buffer (H₂O, 10 mM, pH 7.4) as a poor solvent. The weakly fluorescent L in pure DMSO showed a fluorescence enhancement at 532 nm upon increasing the fraction of HEPES above 70% because of the self-aggregation of L and excited state intramolecular proton transfer (ESIPT) process. The AIE luminogen (AIEgen) L was applied for the sensing of metal ions in HEPES buffer (5% DMSO, 10 mM, pH 7.4). Among the fourteen different metal ions (Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Mg²⁺, Fe³⁺, Fe²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Al³⁺, Cr³⁺), AIEgen L showed a selective fluorescence enhancement at 435 nm in the presence of Al³⁺ without disturbing the fluorescence intensity at 532 nm due to the chelation-enhanced fluorescence effect (CHEF). The detection limit of 20 nM was estimated by performing the fluorescence titration of AIEgen L with Al³⁺. The reversibility of the Al³⁺ selective AIEgen L was demonstrated by adding a strong chelating agent EDTA. Finally, the practical utility of AIEgen L was validated by quantifying Al³⁺ in river and tap water samples.

Schiff Base Aggregation-Induced Emission Luminogens for Sensing Applications: A Review

Fluorescence sensing can not only identify a target substrate qualitatively but also achieve the purpose of quantitative detection through the change of the fluorescence signal. It has the advantages of immense sensitivity, rapid response, and excellent selectivity. The proposed aggregation-induced emission (AIE) concept solves the problem of the fluorescence of traditional fluorescent molecules becoming weak or quenched in high concentration or aggregated state conditions. Schiff base fluorescent probes have the advantages of simple synthesis, low toxicity, and easy design. They are often used for the detection of various substances. In this review we cover late developments in Schiff base compounds with AIE characteristics working as fluorescence sensors.

Fluorescent turn-on sensing of albumin proteins (BSA and ovalbumin) using vitamin B6 cofactor derived Schiff base

The detection of albumin proteins with high accuracy by facile analytical approaches is important for the diagnosis of various diseases. This manuscript introduced an easy-to-prepare Schiff base L by condensing vitamin B₆ cofactor pyridoxal 5'-phosphate (PLP) with 2-aminothiophenol for the fluorescence turn-on sensing of bovine serum albumin (BSA) and ovalbumin (OVA). The weakly emissive L showed a significant fluorescence enhancement at 485 and 490 nm in the presence of OVA and BSA with an estimated sensitivity limit of 1.7 µM and 0.3 µM, respectively. The formation of protein-ligand complex restricted the free intramolecular rotation of L is expected to show the selective fluorescence enhancement. The molecular docking and molecular dynamics simulations were performed to examine the binding affinity and modes between BSA/OVA and L. The practical utility of L as a fluorescent turn-on sensor was validated by quantifying BSA and OVA in various real biological samples of milk, serum, egg white and urine with good recovery percentages.

Probing biothiols using a red-emitting pyridoxal derivative by adopting copper(II) displacement approach and cell imaging

An aggregation-induced emission (AIE) active Schiff base L was synthesized by condensing pyridoxal and 2-hydroxy-1-naphthaldehyde with p -phenylenediamine in two simple steps in ethanol. The colorimetric, UV-Vis and fluorescence studies of L revealed that the weak yellow emissive L (λ em =540 nm, λ ex = 450 nm) in pure DMSO turned to a red-emissive L upon increasing the poor solvent fraction (HEPES buffer, 10 mM, pH 7.4) above 50% in DMSO. The DLS and SEM analysis supported the formation of self-aggregates of L that restricted the intramolecular motion and activated the ESIPT. The cations sensing ability of the AIEgen L was explored in HEPES buffer (5% DMSO, 10 mM, pH 7.4), where Cu 2+ selectively quenched the fluorescence at 608 nm due to the chelation-enhanced fluorescence quenching (CHEQ) effect with an estimated sensitivity limit of 0.9 µM. Subsequently, the in situ formed AIEgen L-Cu 2+ complex was applied for the cascade detection of cysteine (Cys), homocysteine (Hcy) and glutathione (GSH). The decomplexation of Cu 2+ from the AIEgen L-Cu 2+ upon addition of Cys, Hcy and GSH restored the quenched fluorescence emission of AIEgen L at 608 nm. With this Cu 2+ displacement approach, the concentration of Cys, Hcy and GSH can be detected down to 2.8 µM, 3.12 µM and 2.0 µM, respectively. The practical utility of AIEgen L and AIEgen L-Cu 2+ was validated by quantifying the selective analytes in various environmental and biological samples, and also applied successfully for the cell imaging applications.