Near-infrared fluorescent probe based on cyanine scaffold for sensitive detection of uranyl ions in living cells and water samples

Synthesis and Characterization of Sulfonamide-Containing Naphthalimides as Fluorescent Probes

A tumor-targeting fluorescent probe has attracted increasing interest in fluorescent imaging for the noninvasive detection of cancers in recent years. Sulfonamide-containing naphthalimide derivatives (SN-2NI, SD-NI) were synthesized by the incorporation of N-butyl-4-ethyldiamino-1,8-naphthalene imide (NI) into sulfonamide (SN) and sulfadiazine (SD) as the tumor-targeting groups, respectively. These derivatives were further characterized by mass spectrometry (MS), nuclear magnetic resonance spectroscopy (1H NMR), Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV), and a fluorescence assay. In vitro properties, including cell cytotoxicity and the cell uptake of tumor cells, were also evaluated. Sulfonamide-containing naphthalimide derivatives possessed low cell cytotoxicity to B16F10 melanoma cells. Moreover, SN-2NI and SD-NI can be taken up highly by B16F10 cells and then achieve good green fluorescent images in B16F10 cells. Therefore, sulfonamide-containing naphthalimide derivatives can be considered to be the potential probes used to target fluorescent imaging in tumors.

A novel lysosome-targeted fluorescent probe for precise formaldehyde detection in water samples, living cells and breast cancer tumors

This study investigated the potential ability of the fluorescent probe Ly-CHO to detect formaldehyde (FA) in living cells and tumor-bearing mice. Ly-CHO exhibited great selectivity, excellent sensitivity, and rapid response to FA, making it a valuable tool for tracking FA concentration changes. The probe was also found to target lysosomes specifically. Furthermore, Ly-CHO showed an obvious fluorescence increase in endogenous CHO detection after adding tetrahydrogen folic acid (THFA). This study validated Ly-CHO's possibility for FA imaging in vivo, with potential applications in understanding formaldehyde-related diseases.

Turn-On Fluorescent Probe for BSA Detection Constructed by Supramolecular Assembly

The fluorescent probe method has attracted significant research attention due to its high sensitivity and reproducibility in detecting bovine serum albumin (BSA). In this study, we constructed a fluorescent probe for BSA detection by assembling an amphiphilic organic fluorescent molecule, termed 2-(2'-hydroxyphenyl) benzothiazole (HBT-11), with BSA. In an aqueous solution, HBT-11 exhibited a weak fluorescence emission at 501 nm. However, the addition of BSA substantially enhanced the fluorescence emission at 501 nm, indicating that the assembly was driven by electrostatic interactions between HBT-11 and BSA. HBT-11, serving as a fluorescent probe for BSA detection, demonstrated a limit of detection (LOD) as low as 3.92 nmol L-1, excellent photostability, high selectivity, and robust anti-interference capability. Notably, we successfully applied HBT-11 for detecting BSA in fetal bovine serum and selectively imaging BSA in HeLa cells.

Heavy Metal-Induced Assembly of DNA Network Biosensor from Double-Loop Hairpin Probes for Ultrasensitive Detection of UO22+ in Water and Soil Samples

The uranyl ion (UO22+) is the most stable form of uranium, which exhibits high toxicity and bioavailability posing a severe risk to human health. The construction of ultrasensitive, reliable, and robust sensing techniques for UO22+ detection in water and soil samples remains a challenge. Herein, a DNA network biosensor was fabricated for UO22+ detection using DNAzyme as the heavy metal recognition element and double-loop hairpin probes as DNA assembly materials. UO22+-activated specific cleavage of the DNAzyme will liberate the triggered DNA fragment, which can be utilized to launch a double-loop hairpin probe assembly among Hab, Hbc, and Hca. Through multiple cyclic cross-hybridization reactions, hexagonal DNA duplex nanostructures (n[Hab•Hbc•Hca]) were formed. This DNA network sensing system generates a high fluorescence response for UO22+ monitoring. The biosensor is ultrasensitive, with a detection limit of 2 pM. This sensing system also displays an excellent selectivity and robustness, enabling the DNA network biosensor to work even in complex water and soil samples with excellent accuracy and reliability. With the advantages of enzyme-free operation, outstanding specificity, and high sensitivity, our proposed DNA network biosensor provides a reliable, simple, and robust method for trace levels of UO22+ detection in environmental samples.

Evolution of Indocyanine Green Fluorescence in Breast and Axilla Surgery: An Australasian Experience

The evolution of indocyanine green (ICG) fluorescence in breast and axilla surgery from an Australasian perspective is discussed in this narrative review with a focus on breast cancer and reconstruction surgery. The authors have nearly a decade of experience with ICG in a high-volume institution, which has resulted in publications and ongoing future research evaluating its use for predicting mastectomy skin flap perfusion for reconstruction, lymphatic mapping for sentinel lymph node (SLN) biopsy, and axillary reverse mapping (ARM) for prevention of lymphoedema. In the authors' experience, routine use of ICG angiography during breast reconstruction postmastectomy was demonstrated to be cost-effective for the reduction of ischemic complications in the Australian setting. A novel tracer combination, ICG-technetium-99m offered a safe and effective substitute to the "gold standard" dual tracer for SLN biopsy, although greater costs were associated with ICG. An ongoing trial will evaluate ARM node identification using ICG fluorescence during axillary lymph node dissection and potential predictive factors of ARM node involvement. These data add to the growing literature on ICG and allow future research to build on this to improve understanding of the potential benefits of fluorescence-guided surgery in breast cancer and reconstruction surgery.

Development of a fluorescence-based sensor based on 1,8-naphthalimide for highly sensitive detection of phosgene

Developing advanced sensing technologies for phosgene is critical for public safety and national security. Here, we report a novel fluorescent probe NP (abbreviation for naphthalimide-based probe) for the selective detection of phosgene. The sensor was synthesized through a substitution reaction between 1,8-naphthalimide with 1,4,7-triazacyclononane. The high reactivity of probe NP towards phosgene led to a marked fluorescence emission turn-on, demonstrating the high selectivity of this sensor. Furthermore, a practical on-site detection method for phosgene was developed by loading probe NP on test strips. These test strips can detect gaseous phosgene below 1 ppm. The successful development of this sensor opens up new possibilities for detecting methods for phosgene.

Single Quasi-Symmetrical LED with High Intensity and Wide Beam Width Using Diamond-Shaped Mirror Refraction Method for Surgical Fluorescence Microscope Applications

To remove tumors with the same blood vessel color, observation is performed using a surgical microscope through fluorescent staining. Therefore, surgical microscopes use light emitting diode (LED) emission and excitation wavelengths to induce fluorescence emission wavelengths. LEDs used in hand-held type microscopes have a beam irradiation range of 10° and a weak power of less than 0.5 mW. Therefore, fluorescence emission is difficult. This study proposes to increase the beam width and power of LED by utilizing the quasi-symmetrical beam irradiation method. Commercial LED irradiates a beam 1/r2 distance away from the target (working distance). To obtain the fluorescence emission probability, set up four mirrors. The distance between the mirrors and the LED is 5.9 cm, and the distance between the mirrors and the target is 2.95 cm. The commercial LED reached power on target of 8.0 pW within the wavelength band of 405 nm. The power reaching the target is 0.60 mW in the wavelength band of 405 nm for the LED with the beam mirror attachment method using the quasi-symmetrical beam irradiation method. This result is expected to be sufficient for fluorescence emission. The light power of the mirror was increased by approximately four times.

In vivo bioimaging and detection of endogenous hypochlorous acid in lysosome using a near-infrared fluorescent probe

The phagocyte's lysosome is the primary site of hypochlorous acid (HOCl) synthesis, and HOCl can be used as a biomarker for osteoarthritis diagnosis and treatment evaluation. Accurate detection of HOCl with high sensitivity and selectivity is required to understand its activities in healthy bio-systems and diseases. By integrating acceptable design principles and dye screening methodologies, we proposed and developed a novel near-infrared fluorescent HOCl sensing probe (FNIR-HOCl). The FNIR-HOCl probe has a quick reaction rate, high sensitivity (LOD = 70 nM), and excellent selectivity toward HOCl over other metal ions and reactive oxygen species. It has been successfully implemented to detect endogenous HOCl produced by RAW264.7 cells, as well as in vivo imaging towards mice with osteoarthritis. As a result, the probe FNIR-HOCl is extremely promising as a biological tool for revealing the roles of HOCl in various physiological and pathological contexts.

Fluorescent Probe Combined with Photoelectric Analysis Technology for Detection of Escherichia coli

Food safety is facing great challenges in preventing foodborne diseases caused by pathogenic pollution, especially in resource-limited areas. The rapid detection technique of microorganisms, such as immunological methods and molecular biological methods, plays a crucial key in timely bioanalysis and disease treatment strategies. However, it is difficult for these methods to simultaneously meet the criteria of simple operation, high specificity, and sensitivity, as well as low cost. Coconut water is known as the "water of life" in Hainan. It is a refreshing and nutritious beverage which is widely consumed due to its beneficial properties to health. Coconut water processing is an important pillar industry in Hainan. The detection of pathogenic microorganisms, such as Escherichia coli, in coconut water has become an important factor which has restricted the upgrading and development of this industry. Based on the needs of industrial development, we developed a microbial photoelectric detection system which was composed of a fluorescent probe detection reagent and a photoelectric sensor detection device. This system combined microbial enzyme targets, selective fluorescent substrate metabolism characteristics, and a photoelectric sensor signal transduction mechanism, which produce a strong signal with a high signal-to-noise ratio. The microbial detection system developed here has a simple structure, simple and convenient operation, short detecting time (≥2 h), and high sensitivity (1 CFU/mL). This system may also enable early warning and monitoring programs for other pathogenic microorganisms in order to promote the overall competitiveness of the Hainan coconut water industry.

Mitochondrial Targeting and Imaging with Small Organic Conjugated Fluorophores: A Review

The last decade has seen an increasingly large number of studies reporting on the development of novel small organic conjugated systems for mitochondrial imaging exploiting optical signal transduction pathways. Mitochondria are known to play a critical role in a number of key biological processes, including cellular metabolism. Importantly, irregularities on their working function are nowadays understood to be intimately linked to a range of clinical conditions, highlighting the importance of targeting mitochondria for therapeutic benefits. In this work we carry out an in-depth evaluation on the progress to date in the field to pave the way for the realization of superior alternatives to those currently existing. The manuscript is structured by commonly used chemical scaffolds and comprehensively covers key aspects factored in design strategies such as synthetic approaches as well as photophysical and biological characterization, to foster collaborative work among organic and physical chemists as well as cell biologists.

Dextran Fluorescent Probes Containing Sulfadiazine and Rhodamine B Groups

Fluorescent imaging has been expanded, as a non-invasive diagnostic modality for cancers, in recent years. Fluorescent probes in the near-infrared window can provide high sensitivity, resolution, and signal-to-noise ratio, without the use of ionizing radiation. Some fluorescent compounds with low molecular weight, such as rhodamine B (RhB) and indocyanine green (ICG), have been used in fluorescent imaging to improve imaging contrast and sensitivity; however, since these probes are excreted from the body quickly, they possess significant restrictions for imaging. To find a potential solution to this, this work investigated the synthesis and properties of novel macromolecular fluorescent compounds. Herein, water-soluble dextran fluorescent compounds (SD-Dextran-RhB) were prepared by the attachment of RhB and sulfadiazine (SD) derivatives to dextran carrier. These fluorescent compounds were then characterized through IR, ¹H NMR, ¹³C NMR, UV, GPC, and other methods. Assays of their cellular uptake and cell cytotoxicity and fluorescent imaging were also performed. Through this study, it was found that SD-Dextran-RhB is sensitive to acidic conditions and possesses low cell cytotoxicities compared to normal 293 cells and HepG2 and HeLa tumor cells. Moreover, SD-Dextran-RhB demonstrated good fluorescent imaging in HepG2 and HeLa cells. Therefore, SD-Dextran-RhB is suitable to be potentially applied as a probe in the fluorescent imaging of tumors.