Evaluation of five commercial nucleic acid extraction kits for their ability to inactivate Bacillus anthracis spores and comparison of DNA yields from spores and spiked environmental samples

Planetary Protection Knowledge Gap Closure Enabling Crewed Missions to Mars

As focus for exploration of Mars transitions from current robotic explorers to development of crewed missions, it remains important to protect the integrity of scientific investigations at Mars, as well as protect the Earth's biosphere from any potential harmful effects from returned martian material. This is the discipline of planetary protection, and the Committee on Space Research (COSPAR) maintains the consensus international policy and guidelines on how this is implemented. Based on National Aeronautics and Space Administration (NASA) and European Space Agency (ESA) studies that began in 2001, COSPAR adopted principles and guidelines for human missions to Mars in 2008. At that point, it was clear that to move from those qualitative provisions, a great deal of work and interaction with spacecraft designers would be necessary to generate meaningful quantitative recommendations that could embody the intent of the Outer Space Treaty (Article IX) in the design of such missions. Beginning in 2016, COSPAR then sponsored a multiyear interdisciplinary meeting series to address planetary protection "knowledge gaps" (KGs) with the intent of adapting and extending the current robotic mission-focused Planetary Protection Policy to support the design and implementation of crewed and hybrid exploration missions. This article describes the outcome of the interdisciplinary COSPAR meeting series, to describe and address these KGs, as well as identify potential paths to gap closure. It includes the background scientific basis for each topic area and knowledge updates since the meeting series ended. In particular, credible solutions for KG closure are described for the three topic areas of (1) microbial monitoring of spacecraft and crew health; (2) natural transport (and survival) of terrestrial microbial contamination at Mars, and (3) the technology and operation of spacecraft systems for contamination control. The article includes a KG data table on these topic areas, which is intended to be a point of departure for making future progress in developing an end-to-end planetary protection requirements implementation solution for a crewed mission to Mars. Overall, the workshop series has provided evidence of the feasibility of planetary protection implementation for a crewed Mars mission, given (1) the establishment of needed zoning, emission, transport, and survival parameters for terrestrial biological contamination and (2) the creation of an accepted risk-based compliance approach for adoption by spacefaring actors including national space agencies and commercial/nongovernment organizations.

Comparison of three commercial DNA extraction kits for the enhancement of PCR assay sensitivity for Xanthomonas euvesicatoria pv. allii

AIM

The study was carried out to evaluate three commercial DNA extraction kits, Probe GS, FitoSorb and Sorb GMO, thus identifying the most suitable for isolating the phytopathogenic bacteria Xanthomonas euvesicatoria pv. allii.

MATERIALS AND METHODS

Onion seed samples were prepared which were inoculated with bacterial concentrations ranging from 10¹ to 10⁷  CFU per ml. Real-time PCR was performed to determine the efficacy of the isolated DNA in enhancing the sensitivity of the assay. The DNA extracted by Probe GS had the best detectability, having been detected at the lowest concentration used in the study 10¹  × 3 CFU per ml. FitoSorb and Sorb GMO yielded DNA with a higher and similar limit of detection 10³  × 3 CFU per ml. Furthermore, Probe GS had the lowest cycle at every concentration tested as compared to the other methods.

CONCLUSION

Therefore, Probe GS proved to be the most optimized kit for the extraction of X. euvesicatoria pv. allii, hence enhanced degree of sensitivity for the assay.

IMPACT AND SIGNIFICANCE OF THE STUDY

The findings generated in this study can be used by phytosanitary laboratories to develop highly rapid and accurate diagnostic protocols for X. euvesicatoria pv. allii.

Efficiency of chemical versus mechanical disruption methods of DNA extraction for the identification of oral Gram-positive and Gram-negative bacteria

Objective

Clinical diagnostics often requires the detection of multiple bacterial species in limited clinical samples with a single DNA extraction method. This study aimed to compare the bacterial DNA extraction efficiency of two lysis methods automated with the MagNA-Pure LC instrument. The samples included five oral bacterial species (three Gram-positive and two Gram-negative) with or without human saliva background.

Methods

Genomic DNA (gDNA) was extracted from bacterial cultures by bead-beating lysis (BMP) or chemical lysis (MP), followed by automated purification and measurement by quantitative PCR.

Results

For pure bacterial cultures, the MP method yielded higher quantities of extracted DNA and a lower detection limit than the BMP method, except where the samples contained high numbers of Gram-positive bacteria. For bacterial cultures with a saliva background, no difference in gDNA extraction efficacy was observed between the two methods.

Conclusions

The efficiency of a bacterial DNA extraction method is not only affected by the bacterial cell wall structure but also by the sample milieu. The MP method provided superior gDNA extraction efficiency when the samples contained a single bacterial species, whereas either of the BMP and MP methods could be applied with similar efficiencies to samples containing multiple species of bacteria.

Food Sensing: Detection of Bacillus cereus Spores in Dairy Products

Milk is a source of essential nutrients for infants and adults, and its production has increased worldwide over the past years. Despite developments in the dairy industry, premature spoilage of milk due to the contamination by Bacillus cereus continues to be a problem and causes considerable economic losses. B. cereus is ubiquitously present in nature and can contaminate milk through a variety of means from the farm to the processing plant, during transport or distribution. There is a need to detect and quantify spores directly in food samples, because B. cereus might be present in food only in the sporulated form. Traditional microbiological detection methods used in dairy industries to detect spores show limits of time (they are time consuming), efficiency and sensitivity. The low level of B. cereus spores in milk implies that highly sensitive detection methods should be applied for dairy products screening for spore contamination. This review describes the advantages and disadvantages of classical microbiological methods used to detect B. cereus spores in milk and milk products, related to novel methods based on molecular biology, biosensors and nanotechnology.

Detection and Identification of Bacillus anthracis: From Conventional to Molecular Microbiology Methods

Rapid and reliable identification of Bacillus anthracis is of great importance, especially in the event of suspected deliberate release of anthrax spores. However, the identification of B. anthracis is challenging due to its high similarity to closely related species. Since Amerithrax in 2001, a lot of effort has been made to develop rapid methods for detection and identification of this microorganism with special focus on easy-to-perform rapid tests for first-line responders. This article presents an overview of the evolution of B. anthracis identification methods from the time of the first description of the microorganism until the present day.

Intestinal Flora Disruption and Novel Biomarkers Associated With Nasopharyngeal Carcinoma

Background: Nasopharyngeal carcinoma (NPC) is a malignant nasopharyngeal disease with a complicated etiology that occurs mostly in southern China. Intestinal flora imbalance is believed to be associated with a variety of organ malignancies. Current studies revealed that the destruction of intestinal flora is associated with NPC, and many studies have shown that intestinal flora can be used as a biomarker for many cancers and to predict cancer. Methods: To compare the differences in intestinal flora compositions and biological functions among 8 patients with familial NPC (NPC_F), 24 patients with sporadic NPC (NPC_S), and 27 healthy controls (NOR), we compared the intestinal flora DNA sequencing and hematological testing results between every two groups using bioinformatic methods. Results: Compared to the NOR group, the intestinal flora structures of the patients in the NPC_F and NPC_S groups showed significant changes. In NPC_F, Clostridium ramosum, Citrobacter spp., Veillonella spp., and Prevotella spp. were significantly increased, and Akkermansia muciniphila and Roseburia spp. were significantly reduced. In NPC_S, C. ramosum, Veillonella parvula, Veillonella dispar, and Klebsiella spp. were significantly increased, and Bifidobacterium adolescentis was significantly reduced. A beta diversity analysis showed significant difference compared NPC_F with NOR based on Bray Curtis (P = 0.012) and Unweighted UniFrac (P = 0.0045) index, respectively. The areas under the ROC curves plotted were all 1. Additionally, the concentrations of 5-hydroxytryptamine (5-HT) in NPC_F and NPC_S were significantly higher than those of NOR. C. ramosum was positively correlated with 5-HT (rcm: 0.85, P < 0.001). A functional analysis of the intestinal flora showed that NPC_F was associated with Neurodegenerative Diseases (P = 0.023) and that NPC_S was associated with Neurodegenerative Diseases (P = 0.045) as well. Conclusion: We found that NPC was associated with structural imbalances in the intestinal flora, with C. ramosum that promoted the elevation of 5-HT and opportunistic pathogens being significantly increased, while probiotics significantly decreased. C. ramosum can be used as a novel biomarker and disease prediction models should be established for NPC. The new biomarkers and disease prediction models may be used for disease risk prediction and the screening of high-risk populations, as well as for the early noninvasive diagnosis of NPC.

Identification of bacterial isolates from a public hospital in Australia using complexity-reduced genotyping

Bacterial identification methods used in routine identification of pathogens in medical microbiology include a combination approach of biochemical tests, mass spectrometry or molecular biology techniques. Extensive publicly-available databases of DNA sequence data from pathogenic bacteria have been amassed in recent years; this provides an opportunity for using bacterial genome sequencing for identification purposes. Whole genome sequencing is increasing in popularity, although at present it remains a relatively expensive approach to bacterial identification and typing. Complexity-reduced bacterial genome sequencing provides an alternative. We evaluate genomic complexity-reduction using restriction enzymes and sequencing to identify bacterial isolates. A total of 165 bacterial isolates from hospital patients in the Australian Capital Territory, between 2013 and 2015 were used in this study. They were identified and typed by the Microbiology Department of Canberra Public Hospital, and represented 14 bacterial species. DNA extractions from these samples were processed using a combination of the restriction enzymes PstI with MseI, PstI with HpaII and MseI with HpaII. The resulting sequences (length 30-69 bp) were aligned against publicly available bacterial genome and plasmid sequences. Results of the alignment were processed using a bioinformatics pipeline developed for this project, Currito3.1 DNA Fragment Analysis Software. All 165 samples were correctly identified to genus and species by each of the three combinations of restriction enzymes. A further 35 samples typed to the level of strain identified and compared for consistency with MLST typing data and in silico MLST data derived from the nearest sequenced candidate reference. The high level of agreement between bacterial identification using complexity-reduced genome sequencing and standard hospital identifications indicating that this new approach is a viable alternative for identification of bacterial isolates derived from pathology specimens. The effectiveness of species identification and in particular, strain typing, depends on access to a comprehensive and taxonomically accurate bacterial genome sequence database containing relevant bacterial species and strains.

Cultivable microbial community in 2-km-deep, 20-million-year-old subseafloor coalbeds through ~1000 days anaerobic bioreactor cultivation

Recent explorations of scientific ocean drilling have revealed the presence of microbial communities persisting in sediments down to ~2.5 km below the ocean floor. However, our knowledge of these microbial populations in the deep subseafloor sedimentary biosphere remains limited. Here, we present a cultivation experiment of 2-km-deep subseafloor microbial communities in 20-million-year-old lignite coalbeds using a continuous-flow bioreactor operating at 40 °C for 1029 days with lignite particles as the major energy source. Chemical monitoring of effluent samples via fluorescence emission-excitation matrices spectroscopy and stable isotope analyses traced the transformation of coalbed-derived organic matter in the dissolved phase. Hereby, the production of acetate and 13C-depleted methane together with the increase and transformation of high molecular weight humics point to an active lignite-degrading methanogenic community present within the bioreactor. Electron microscopy revealed abundant microbial cells growing on the surface of lignite particles. Small subunit rRNA gene sequence analysis revealed that diverse microorganisms grew in the bioreactor (e.g., phyla Proteobacteria, Firmicutes, Chloroflexi, Actinobacteria, Bacteroidetes, Spirochaetes, Tenericutes, Ignavibacteriae, and SBR1093). These results indicate that activation and adaptive growth of 2-km-deep microbes was successfully accomplished using a continuous-flow bioreactor, which lays the groundwork to explore networks of microbial communities of the deep biosphere and their physiologies.

DUST-BATHING BEHAVIORS OF AFRICAN HERBIVORES AND THE POTENTIAL RISK OF INHALATIONAL ANTHRAX

:  Anthrax in herbivorous wildlife and livestock is generally assumed to be transmitted via ingestion or inhalation of Bacillus anthracis spores. Although recent studies have highlighted the importance of the ingestion route for anthrax transmission, little is known about the inhalational route in natural systems. Dust bathing could aerosolize soilborne pathogens such as B. anthracis, exposing dust-bathing individuals to inhalational infections. We investigated the potential role of dust bathing in the transmission of inhalational anthrax to herbivorous wildlife in Etosha National Park, Namibia, an area with endemic seasonal anthrax outbreaks. We 1) cultured soils from dust-bathing sites for the presence and concentration of B. anthracis spores, 2) monitored anthrax carcass sites, the locations with the highest B. anthracis concentrations, for evidence of dust bathing, including a site where a zebra died of anthrax on a large dust bath, and 3) characterized the ecology and seasonality of dust bathing in plains zebra ( Equus quagga), blue wildebeest ( Connochaetes taurinus), and African savanna elephant ( Loxodonta africana) using a combination of motion-sensing camera traps and direct observations. Only two out of 83 dust-bath soils were positive for B. anthracis, both with low spore concentrations (≤20 colony-forming units per gram). We also detected no evidence of dust baths occurring at anthrax carcass sites, perhaps due to carcass-induced changes in soil composition that may deter dust bathing. Finally, despite observing some seasonal variation in dust bathing, preliminary evidence suggests that the seasonality of dust bathing and anthrax mortalities are not correlated. Thus, although dust bathing creates a dramatic cloud of aerosolized soil around an individual, our microbiologic, ecologic, and behavioral results in concert demonstrate that dust bathing is highly unlikely to transmit inhalational anthrax infections.

An Optimized Method for Quantification of Pathogenic Leptospira in Environmental Water Samples

Leptospirosis is a zoonotic disease usually acquired by contact with water contaminated with urine of infected animals. However, few molecular methods have been used to monitor or quantify pathogenic Leptospira in environmental water samples. Here we optimized a DNA extraction method for the quantification of leptospires using a previously described Taqman-based qPCR method targeting lipL32, a gene unique to and highly conserved in pathogenic Leptospira. QIAamp DNA mini, MO BIO PowerWater DNA and PowerSoil DNA Isolation kits were evaluated to extract DNA from sewage, pond, river and ultrapure water samples spiked with leptospires. Performance of each kit varied with sample type. Sample processing methods were further evaluated and optimized using the PowerSoil DNA kit due to its performance on turbid water samples and reproducibility. Centrifugation speeds, water volumes and use of Escherichia coli as a carrier were compared to improve DNA recovery. All matrices showed a strong linearity in a range of concentrations from 10⁶ to 10° leptospires/mL and lower limits of detection ranging from <1 cell /ml for river water to 36 cells/mL for ultrapure water with E. coli as a carrier. In conclusion, we optimized a method to quantify pathogenic Leptospira in environmental waters (river, pond and sewage) which consists of the concentration of 40 mL samples by centrifugation at 15,000×g for 20 minutes at 4°C, followed by DNA extraction with the PowerSoil DNA Isolation kit. Although the method described herein needs to be validated in environmental studies, it potentially provides the opportunity for effective, timely and sensitive assessment of environmental leptospiral burden.

Lethal exposure: An integrated approach to pathogen transmission via environmental reservoirs

To mitigate the effects of zoonotic diseases on human and animal populations, it is critical to understand what factors alter transmission dynamics. Here we assess the risk of exposure to lethal concentrations of the anthrax bacterium, Bacillus anthracis, for grazing animals in a natural system over time through different transmission mechanisms. We follow pathogen concentrations at anthrax carcass sites and waterholes for five years and estimate infection risk as a function of grass, soil or water intake, age of carcass sites, and the exposure required for a lethal infection. Grazing, not drinking, seems the dominant transmission route, and transmission is more probable from grazing at carcass sites 1-2 years of age. Unlike most studies of virulent pathogens that are conducted under controlled conditions for extrapolation to real situations, we evaluate exposure risk under field conditions to estimate the probability of a lethal dose, showing that not all reservoirs with detectable pathogens are significant transmission pathways.

Mobile diagnostics in outbreak response, not only for Ebola: a blueprint for a modular and robust field laboratory

We established a modular, rapidly deployable laboratory system that provides diagnostic support in resource-limited, remote areas. Developed as a quick response asset to unusual outbreaks of infectious diseases worldwide, several of these laboratories have been used as part of the World Health Organization response to the Ebola virus outbreaks by teams of the 'European Mobile Lab' project in West Africa since March 2014. Within three days from deployment, the first European mobile laboratory became operational at the Ebola Treatment Unit (ETU) in Guéckédou, southern Guinea. Deployment in close proximity to the ETU decreased the turnaround time to an average of 4 h instead of several days in many cases. Between March 2014 and May 2015, more than 5,800 samples were tested in this field laboratory. Further EMLab units were deployed to Nigeria, Liberia and Sierra Leone in the following months of the Ebola outbreak. The technical concept of the EMLab units served as a blueprint for other mobile Ebola laboratories which have been set up in Mali, Côte d'Ivoire, Sierra Leone and other countries in West Africa. Here, we describe design, capabilities and utility of this deployable laboratory system for use in response to disease outbreaks, epidemiological surveillance and patient management.

PCR amplification of a triple-repeat genetic target directly from whole blood in 15 minutes as a proof-of-principle PCR study for direct sample analysis for a clinically relevant target

Background

Most PCR-based diagnostics are still considered time- and labor-intensive due to disparate purification, amplification, and detection steps. Advancements in PCR enzymes and buffer chemistry have increased inhibitor tolerance, facilitating PCR directly from crude samples. Obviating the need for DNA purification, while lacking a concentration step, these direct sample methods are particularly apt for human genetic testing. However, direct PCR protocols have traditionally employed thermal cyclers with slow ramp rates and conservative hold times that significantly increase an assay’s time-to-result. For this proof-of-principle study, our objective was to significantly reduce sample preparation and assay time for a PCR-based genetic test, for myotonic dystrophy type 1 (DM1), by pairing an inhibitor-resistant enzyme mix with a rapid thermal cycler to analyze samples directly in whole blood.

Methods

DM1 genetic screening was done with an adapted conventional PCR approach that employed the Streck Philisa® Thermal Cycler, the inhibitor-resistant NEBNext® High-Fidelity 2X PCR Master Mix, and agarose gel electrophoresis or an Agilent 2100 Bioanalyzer for detection. The Gene Link™ Myotonic Dystrophy Genemer™ Kit was used as a reference assay kit to evaluate the rapid assay.

Results

In this work, a rapid and direct PCR assay testing 10% whole blood as template has been developed as an exclusionary screening assay for DM1, a triple-repeat genetic disorder. PCR amplification was completed in 15 minutes using 30 cycles, including in situ hot-start/cell lysis. Out of the 40 donors screened, this assay identified 23 (57.5%) as DM1 negative suggesting no need for further testing. These data are 100% concordant with data collected using the commercially available Gene Link Genemer™ Kit per the kit-specific PCR protocol.

Conclusions

The PCR assay described in this study amplified DM1 short tandem repeats in 15 minutes. By eliminating sample purification and slower conventional PCR protocols, we demonstrated how adaptation of current PCR technology and chemistries can produce a simple-to-use exclusionary screening assay that is independent of up-front sample prep, improving a clinical lab technician’s time-to-result. We envision this direct and rapid methodology could be applied to other conventional PCR-based genetic tests and sample matrices where genomic DNA is targeted for analysis within a given molecular diagnostic platform.

Elimination of bioweapons agents from forensic samples during extraction of human DNA

Collection of DNA for genetic profiling is a powerful means for the identification of individuals responsible for crimes and terrorist acts. Biologic hazards, such as bacteria, endospores, toxins, and viruses, could contaminate sites of terrorist activities and thus could be present in samples collected for profiling. The fate of these hazards during DNA isolation has not been thoroughly examined. Our goals were to determine whether the DNA extraction process used by the Royal Canadian Mounted Police eliminates or neutralizes these agents and if not, to establish methods that render samples safe without compromising the human DNA. Our results show that bacteria, viruses, and toxins were reduced to undetectable levels during DNA extraction, but endospores remained viable. Filtration of samples after DNA isolation eliminated viable spores from the samples but left DNA intact. We also demonstrated that contamination of samples with some bacteria, endospores, and toxins for longer than 1 h compromised the ability to complete genetic profiling.

Detection and identification of Legionella species in hospital water supplies through Polymerase Chain Reaction (16S rRNA)

Legionella spp. are important waterborne pathogens that are normally transmitted through aerosols. The present work was conducted to investigate the presence of Legionella spp. and its common species in hospital water supplies. Considering the limitations of culture method, polymerase chain reaction (PCR) assays were developed to detect the gene 16S rRNA irrespective of the bacterial serotype. Four well-established DNA extraction protocols (freeze & thaw and phenol-chloroform as two manual protocols and two commercial kits) were tested and evaluated to release DNA from bacterial cells. A total of 45 samples were collected from seven distinct hospitals' sites during a period of 10 months. The PCR assay was used to amplify a 654-bp fragment of the 16S rRNA gene. Legionella were detected in 13 samples (28.9%) by all of the methods applied for DNA extraction. Significant differences were noted in the yield of extracted nucleic acids. Legionella were not detected in any of the samples when DNA extraction by freeze & thaw was used. Excluding this method and comparing manual protocol with commercial kits, Kappa coefficient was calculated as 0.619 with p < 0.05. Although no meaningful differences were found between the kits, DNA extraction with Bioneer kit exhibited a higher sensitivity than classical Qiagen. Showerheads and cold-water taps were the most and least contaminated sources with 55.5 and 9 percent positive samples, respectively. Moreover two positive samples were identified for species by DNA sequencing and submitted to the Gene Bank database with accession Nos. FJ480932 and FJ480933. The results obtained showed that despite the advantages of molecular assays in Legionella tracing in environmental sources, the use of optimised DNA extraction methods is critical.

Recovery and identification of bacterial DNA from illicit drugs

Bacterial infections, including Bacillus anthracis (anthrax), are a common risk associated with illicit drug use, particularly among injecting drug users. There is, therefore, an urgent need to survey illicit drugs used for injection for the presence of bacteria and provide valuable information to health and forensic authorities. The objectives of this study were to develop a method for the extraction of bacterial DNA from illicit drugs and conduct a metagenomic survey of heroin and methamphetamine seized in the Australian Capital Territory during 2002-2011 for the presence of pathogens. Trends or patterns in drug contamination and their health implications for injecting drug users were also investigated. Methods based on the ChargeSwitch(®)gDNA mini kit (Invitrogen), QIAamp DNA extraction mini kit (QIAGEN) with and without bead-beating, and an organic phenol/chloroform extraction with ethanol precipitation were assessed for the recovery efficiency of both free and cellular bacterial DNA. Bacteria were identified using polymerase chain reaction and electrospray ionization-mass spectrometry (PCR/ESI-MS). An isopropanol pre-wash to remove traces of the drug and diluents, followed by a modified ChargeSwitch(®) method, was found to efficiently lyse cells and extract free and cellular DNA from Gram-positive and Gram-negative bacteria in heroin and methamphetamine which could then be identified by PCR/ESI-MS. Analysis of 12 heroin samples revealed the presence of DNA from species of Comamonas, Weissella, Bacillus, Streptococcus and Arthrobacter. No organisms were detected in the nine methamphetamine samples analysed. This study develops a method to extract and identify Gram-positive and Gram-negative bacteria from illicit drugs and demonstrates the presence of a range of bacterial pathogens in seized drug samples. These results will prove valuable for future work investigating trends or patterns in drug contamination and their health implications for injecting drug users as well as enabling forensic links between seizures to be examined.

Comparative evaluation of eleven commercial DNA extraction kits for real-time PCR detection of Bacillus anthracis spores in spiked dairy samples

Spores of Bacillus anthracis are highly resistant and can survive conditions used for food preservation. Sample size and complexity represent the major hurdles for pathogen detection in food-related settings. Eleven commercial DNA extraction kits were evaluated for detection of B. anthracis spores by quantitative real-time PCR (qPCR) in dairy products. DNA was extracted from serial dilutions of B. anthracis spores in milk powder, cream cheese, whole milk and buttermilk. Three kits (QIAamp DNA mini kit, Invisorb Food kit I and II) were determined to produce the lowest limit of detections (LODs) with equally good performance. These kits employed lysozyme and proteinase K treatments or proteinase K in combination with cethyltrimethylamonium bromide-mediated (CTAB) precipitation of cell debris for cell disruption and DNA release. The LODs for these three kits were determined as 10(2) spores/ml of distilled water, 10(3)s pores/20 mg of powdered milk and 10(4) spores/100 mg of cream cheese, respectively. Performance testing of the QIAamp DNA mini kit demonstrated a good reproducibility and appropriate detection limits from 10(3)/ml for butter milk, 10(4)/ml for whole milk and 10(4)/100 mg for low fat cream cheese. However, DNA extraction efficiency was strongly inhibited by cream cheese with higher fat contents with an increased LOD of 10(6)/100 mg spores. This study demonstrated that qPCR detection depends directly on the appropriate DNA extraction method for an individual food matrix and bacterial agent.

Linking plant nutritional status to plant-microbe interactions

Plants have developed a wide-range of adaptations to overcome nutrient limitation, including changes to the quantity and composition of carbon-containing compounds released by roots. Root-associated bacteria are largely influenced by these compounds which can be perceived as signals or substrates. Here, we evaluate the effect of root exudates collected from maize plants grown under nitrogen (N), phosphate (P), iron (Fe) and potassium (K) deficiencies on the transcriptome of the plant growth promoting rhizobacterium (PGPR) Bacillus amyloliquefaciens FZB42. The largest shifts in gene expression patterns were observed in cells exposed to exudates from N-, followed by P-deficient plants. Exudates from N-deprived maize triggered a general stress response in FZB42 in the exponential growth phase, which was evidenced by the suppression of numerous genes involved in protein synthesis. Exudates from P-deficient plants induced bacterial genes involved in chemotaxis and motility whilst exudates released by Fe and K deficient plants did not cause dramatic changes in the bacterial transcriptome during exponential growth phase. Global transcriptional changes in bacteria elicited by nutrient deficient maize exudates were significantly correlated with concentrations of the amino acids aspartate, valine and glutamate in root exudates suggesting that transcriptional profiling of FZB42 associated with metabolomics of N, P, Fe and K-deficient maize root exudates is a powerful approach to better understand plant-microbe interactions under conditions of nutritional stress.

Detection of Ophiocordyceps sinensis in soil by quantitative real-time PCR

Ophiocordyceps sinensis, one of the best known entomopathogenic fungi in traditional Chinese medicine, parasitizes larvae of the moth genus Thitarodes, which lives in soil tunnels. However, little is known about the spatial distribution of O. sinensis in the soil. We established a protocol for DNA extraction, purification, and quantification of O. sinensis in soil with quantitative real-time PCR targeting the internal transcribed spacer region. The method was assessed using 34 soil samples from Tibet. No inhibitory effects in purified soil DNA extracts were detected. The standard curve method for absolute DNA quantification generated crossing point values that were strongly and linearly correlated to the log10 of the initial amount of O. sinensis genomic DNA (r(2) = 0.999) over 7 orders of magnitude (4 × 10(1) to 4 × 10(7) fg). The amplification efficiency and y-intercept value of the standard curve were 1.953 and 37.70, respectively. The amount of O. sinensis genomic DNA decreased with increasing soil depth and horizontal distance from a sclerotium (P < 0.05). Our protocol is rapid, specific, sensitive, and provides a powerful tool for quantification of O. sinensis from soil.

Comparison of DNA extraction kits for detection of Burkholderia pseudomallei in spiked human whole blood using real-time PCR

Burkholderia pseudomallei, the etiologic agent of melioidosis, is endemic in northern Australia and Southeast Asia and can cause severe septicemia that may lead to death in 20% to 50% of cases. Rapid detection of B. pseudomallei infection is crucial for timely treatment of septic patients. This study evaluated seven commercially available DNA extraction kits to determine the relative recovery of B. pseudomallei DNA from spiked EDTA-containing human whole blood. The evaluation included three manual kits: the QIAamp DNA Mini kit, the QIAamp DNA Blood Mini kit, and the High Pure PCR Template Preparation kit; and four automated systems: the MagNAPure LC using the DNA Isolation Kit I, the MagNAPure Compact using the Nucleic Acid Isolation Kit I, and the QIAcube using the QIAamp DNA Mini kit and the QIAamp DNA Blood Mini kit. Detection of B. pseudomallei DNA extracted by each kit was performed using the B. pseudomallei specific type III secretion real-time PCR (TTS1) assay. Crossing threshold (C_T) values were used to compare the limit of detection and reproducibility of each kit. This study also compared the DNA concentrations and DNA purity yielded for each kit. The following kits consistently yielded DNA that produced a detectable signal from blood spiked with 5.5×10⁴ colony forming units per mL: the High Pure PCR Template Preparation, QIAamp DNA Mini, MagNA Pure Compact, and the QIAcube running the QIAamp DNA Mini and QIAamp DNA Blood Mini kits. The High Pure PCR Template Preparation kit yielded the lowest limit of detection with spiked blood, but when this kit was used with blood from patients with confirmed cases of melioidosis, the bacteria was not reliably detected indicating blood may not be an optimal specimen.

Detecting laboratory DNA contamination using polyester-rayon wipes: a method validation study

Due to the high sensitivity of many PCR assays, extraneous target DNA in a laboratory setting can lead to false positive results. To assess the presence of extraneous DNA, many laboratories use gauze wipes to sample laboratory surfaces. The accuracy, precision, limits of detection, linearity, and robustness of a wipe test method and each associated wipe processing step were evaluated using E. coli genomic DNA. The method demonstrated a limit of detection of 108 copies of DNA, which equates to detectable surface concentration of 4.5×10(5) copies of DNA per area sampled. Recovery efficiency or accuracy is 22±10% resulting from a >58% loss of DNA occurring at the wipe wash step. The method is robust, performing consistently despite deliberate modifications of the protocol.

DNA extract characterization process for microbial detection methods development and validation

Background

Quantitative polymerase chain reaction (qPCR) assays used in pathogen detection require rigorous methods development including characterizing DNA extraction products. A DNA extract characterization process is demonstrated using DNA extracted from five different cells types (two Gram-negatives: Escherichia coli, and Burkholderia thailandensis, spores and vegetative cells from the Gram-positive Bacillus cereus, and yeast Saccharomyces cerevisiae) with six different methods.

Results

DNA extract quantity (concentration and extraction efficiency) and quality (purity and intactness) varied by cell type and extraction method enabling the demonstration of different DNA characterization methods. DNA purity was measured using UV spectroscopy, where the A₂₆₀/A₂₈₀ and A₂₆₀/A₂₃₀ ratios are indicators of different contaminants. Reproducibility of UV spectroscopy measurements decreased for DNA concentrations less than 17.5 ng/μL. Forty-seven extracts had concentrations greater than 17.5 ng/μL, 25 had A₂₆₀/A₂₈₀ above 2.0, and 28 had A₂₆₀/A₂₃₀ ratios below 1.8 indicating RNA and polysaccharide contamination respectively. Based on a qPCR inhibition assay the contaminants did not inhibit PCR. Extract intactness was evaluated using microfluidic gel electrophoresis. Thirty-five samples had concentrations above the limit of quantification (LOQ, roughly 11 ng/ μL), 93.5% of the DNA was larger than 1kb and 1% was smaller than 300 bp. Extract concentrations ranged from 1502.2 ng/μL to below the LOQ when UV spectroscopy, fluorometry, and qPCR were used. LOQ for UV spectroscopic and fluorometric measurements were 3.5 ng/μL and 0.25 ng/μL respectively. The qPCR LOQ varied by cell type (5.72 × 10^-3 ng/μL for E. coli, 2.66 × 10^-3 ng/μL, for B. cereus, 3.78 × 10^-3 ng/μL for B. thailandensis, and 7.67 × 10^-4 ng/μL for S. cerevisiae). A number of samples were below the UV spectroscopy (n = 27), flurometry (n = 15), and qPCR (n = 3) LOQ.

Conclusion

The presented DNA extract characterization process provides measures of DNA quantity and quality applicable to microbial detection methods development and validation studies. Evaluating DNA quality and quantity results in a better understanding of process LOD and contributing factors to suboptimal assay performance. The samples used demonstrated the use of different DNA characterization methods presented but did not encompass the full range of DNA extract characteristics.

Evaluation of six commercial DNA extraction kits for recovery of Burkholderia pseudomallei DNA

Six commercially available DNA extraction kits, as well as thermal lysis and proteinase K DNA extraction were evaluated regarding bacterial inactivation, DNA yield and purity, and their use in a Burkholderia pseudomallei real-time PCR. While all methods successfully inactivated the bacteria, by measuring DNA purity and the level of detection by real-time PCR, the proteinase K method was the most sensitive.

Multiphasic DNA adsorption to silica surfaces under varying buffer, pH, and ionic strength conditions

Reversible interactions between DNA and silica are utilized in the solid phase extraction and purification of DNA from complex samples. Chaotropic salts commonly drive DNA binding to silica but inhibit DNA polymerase amplification. We studied DNA adsorption to silica using conditions with or without chaotropic salts through bulk depletion and quartz crystal microbalance (QCM) experiments. While more DNA adsorbed to silica using chaotropic salts, certain buffer conditions without chaotropic salts yielded a similar amount of eluted DNA. QCM results indicate that under stronger adsorbing conditions the adsorbed DNA layer is initially rigid but becomes viscoelastic within minutes. These results qualitatively agreed with a mathematical model for a multiphasic adsorption process. Buffer conditions that do not require chaotropic salts can simplify protocols for nucleic acid sample preparation. Understanding how DNA adsorbs to silica can help optimize nucleic acid sample preparation for clinical diagnostic and research applications.

Real-time polymerase chain reaction assay for rapid and sensitive detection of anthrax spores in spiked soil and talcum powder

Real-time polymerase chain reaction (real-time PCR) is a laboratory technique based on PCR. This technique is able to detect sequence-specific PCR products as they accumulate in "real time" during the PCR amplification, and also to quantify the number of substrates present in the initial PCR mixture before amplification begins. In the present study, real-time PCR assay was employed for rapid and real-time detection of Bacillus anthracis spores spiked in 0.1 g of soil and talcum powder ranging from 5 to 10(7) spores. DNA was isolated from spiked soil and talcum powder, using PBS containing 1 % Triton-X-100, followed by heat treatment. The isolated DNA was used as template for real-time PCR and PCR. Real-time PCR amplification was obtained in 60 min under the annealing condition at 60°C by employing primers targeting the pag gene of B. anthracis. In the present study, the detection limit of real-time PCR assay in soil was 10(3) spores and 10(2) spores in talcum powder, respectively, whereas PCR could detect 10(4) spores in soil and 10(3) spores in talcum powder, respectively.

Rapid filtration separation-based sample preparation method for Bacillus spores in powdery and environmental matrices

Authorities frequently need to analyze suspicious powders and other samples for biothreat agents in order to assess environmental safety. Numerous nucleic acid detection technologies have been developed to detect and identify biowarfare agents in a timely fashion. The extraction of microbial nucleic acids from a wide variety of powdery and environmental samples to obtain a quality level adequate for these technologies still remains a technical challenge. We aimed to develop a rapid and versatile method of separating bacteria from these samples and then extracting their microbial DNA. Bacillus atrophaeus subsp. globigii was used as a simulant of Bacillus anthracis. We studied the effects of a broad variety of powdery and environmental samples on PCR detection and the steps required to alleviate their interference. With a benchmark DNA extraction procedure, 17 of the 23 samples investigated interfered with bacterial lysis and/or PCR-based detection. Therefore, we developed the dual-filter method for applied recovery of microbial particles from environmental and powdery samples (DARE). The DARE procedure allows the separation of bacteria from contaminating matrices that interfere with PCR detection. This procedure required only 2 min, while the DNA extraction process lasted 7 min, for a total of <10 min. This sample preparation procedure allowed the recovery of cleaned bacterial spores and relieved detection interference caused by a wide variety of samples. Our procedure was easily completed in a laboratory facility and is amenable to field application and automation.

Comparison of eight methods for the extraction of Bacillus atrophaeus spore DNA from eleven common interferents and a common swab

Eight DNA extraction products or methods (Applied Biosystems PrepFiler Forensic DNA Extraction Kit; Bio-Rad Instagene Only, Bio-Rad Instagene & Spin Column Purification; EpiCentre MasterPure DNA & RNA Kit; FujiFilm QuickGene Mini80; Idaho Technologies 1-2-3 Q-Flow Kit; MoBio UltraClean Microbial DNA Isolation Kit; Sigma Extract-N-Amp Plant and Seed Kit) were adapted to facilitate extraction of DNA under BSL3 containment conditions. DNA was extracted from 12 common interferents or sample types, spiked with spores of Bacillus atropheaus. Resulting extracts were tested by real-time PCR. No one method was the best, in terms of DNA extraction, across all sample types. Statistical analysis indicated that the PrepFiler method was the best method from six dry powders (baking, biological washing, milk, plain flour, filler and talcum) and one solid (Underarm deodorant), the UltraClean method was the best from four liquids (aftershave, cola, nutrient broth, vinegar), and the MasterPure method was the best from the swab sample type. The best overall method, in terms of DNA extraction, across all sample types evaluated was the UltraClean method.

An evaluation of commercial DNA extraction kits for the isolation of bacterial spore DNA from soil

AIMS

To evaluate six commercial DNA extraction kits for their ability to isolate PCR-quality DNA from Bacillus spores in various soil samples.

METHODS AND RESULTS

Three soils were inoculated with various amounts of Bacillus cereus spores to simulate an outbreak or intentional release of the threat agent Bacillus anthracis. DNA was isolated from soil samples using six commercial DNA extraction kits. Extraction and purification efficiencies were assessed using a duplex real-time PCR assay that included an internal positive control. The FastDNA(®) SPIN kit for Soil showed the highest DNA extraction yield, while the E.Z.N.A.(®) Soil DNA and PowerSoil(®) DNA Isolation kits showed the highest efficiencies in removing PCR inhibitors from loam soil extracts.

CONCLUSIONS

The results of this study suggest that commercially available extraction kits can be used to extract PCR-quality DNA from bacterial spores in soil. The selection of an appropriate extraction kit should depend on the characteristics of the soil sample and the intended downstream application.

SIGNIFICANCE AND IMPACT OF THE STUDY

  The results of this study aid in the selection of an appropriate DNA extraction kit for a given soil sample. Its application could expedite sample processing for real-time PCR detection of a pathogen in soil.

Active community profiling via capillary electrophoresis single-strand conformation polymorphism analysis of amplified 16S rRNA and 16S rRNA genes

Here, we report the validation and advancement of a high-throughput method for fingerprinting the active members of a microbial community. This method, termed active community profiling (ACP), provides information about both the composition and the activity of mixed microbial cultures via comparative measurements of amplified 16S rRNA (RNA) and 16S rRNA genes (DNA). Capillary electrophoresis is used to resolve single-strand conformation polymorphisms of polymerase chain reaction (PCR) and reverse transcription PCR (RT-PCR) products, producing electropherograms representative of the community structure. Active members of the community are distinguished by elevated RNA:DNA peak area ratios. Chemostat experiments with defined populations were conducted to validate the ACP approach. Using a pure culture of Escherichia coli, a direct correlation was found between the growth rate and the RNA:DNA peak ratio. In a second validation experiment, a binary culture of E. coli and Pseudomonas putida was subjected to a controlled environmental change consisting of a shift to anaerobic conditions. ACP revealed the expected cessation of growth of P. putida, an obligate aerobe, while the corresponding DNA-only analysis indicated no change in the culture. Finally, ACP was applied to a complex microbial community, and a novel binning approach was demonstrated for integrating the RNA and DNA electropherograms. ACP thus represents a significant advance from traditional DNA-based profiling techniques, which do not distinguish active from inactive or dead cells, and is well suited for high-throughput community analysis.

Quantification methods for Bacillus cereus vegetative cells and spores in the gastrointestinal environment

There is an interest to understand the fate and behaviour of the food-borne pathogen Bacillus cereus in the gut, a challenging environment with a high bacterial background. We evaluated the current detection methods to select an appropriate strategy for B. cereus monitoring during gastrointestinal experiments. Application of quantitative real-time PCR (qPCR) in a gastrointestinal matrix required careful selection of the qPCR reaction and elaborate optimization of the DNA extraction protocol. Primer competition and depletion problems associated with qPCR reactions targeting general 16S rRNA gene can be avoided by the selection of a target sequence that is unique for and widespread among the target bacteria, such as the toxin gene nheB in the case of pathogenic B. cereus. Enumeration of B. cereus during the ileum phase was impossible by plating due to overgrowth by intestinal bacteria, while a carefully optimized qPCR enabled specific detection and quantification of B. cereus. On the other hand, plating allowed the distinction of viable, injured and dead bacteria and the germination of spores, which was not possible with qPCR. In conclusion, both plating and qPCR were necessary to yield the maximal information regarding the viability and physiology of the B. cereus population in various gastrointestinal compartments.

Comparison of the sensitivity of culture, PCR and quantitative real-time PCR for the detection of Pseudomonas aeruginosa in sputum of cystic fibrosis patients

BACKGROUND

Pseudomonas aeruginosa is the major pathogen involved in the decline of lung function in cystic fibrosis (CF) patients. Early aggressive antibiotic therapy has been shown to be effective in preventing chronic colonization. Therefore, early detection is important and sensitive detection methods are warranted. In this study, we used a dilution series of P. aeruginosa positive sputa, diluted in a pool of P. aeruginosa negative sputa, all from CF patients--to mimick as closely as possible the sputa sent to routine laboratories--to compare the sensitivity of three culture techniques versus that of two conventional PCR formats and four real-time PCR formats, each targeting the P. aeruginosa oprL gene. In addition, we compared five DNA-extraction protocols.

RESULTS

In our hands, all three culture methods and the bioMérieux easyMAG Nuclisens protocol Generic 2.0.1, preceded by proteinase K pretreatment and followed by any of the 3 real-time PCR formats with probes were most sensitive and able to detect P. aeruginosa up to 50 cfu/ml, i.e. the theoretical minimum of one cell per PCR mixture, when taking into account the volumes used in this study of sample for DNA-extraction, of DNA-elution and of DNA-extract in the PCR mixture.

CONCLUSION

In this study, no difference in sensitivity could be found for the detection of P. aeruginosa from sputum between microbiological culture and optimized DNA-extraction and real-time PCR. The results also indicate the importance of the optimization of the DNA-extraction protocol and the PCR format.

Evaluation of automated and manual commercial DNA extraction methods for recovery of Brucella DNA from suspensions and spiked swabs

This study evaluated automated and manual commercial DNA extraction methods for their ability to recover DNA from Brucella species in phosphate-buffered saline (PBS) suspension and from spiked swab specimens. Six extraction methods, representing several of the methodologies which are commercially available for DNA extraction, as well as representing various throughput capacities, were evaluated: the MagNA Pure Compact and the MagNA Pure LC instruments, the IT 1-2-3 DNA sample purification kit, the MasterPure Complete DNA and RNA purification kit, the QIAamp DNA blood mini kit, and the UltraClean microbial DNA isolation kit. These six extraction methods were performed upon three pathogenic Brucella species: B. abortus, B. melitensis, and B. suis. Viability testing of the DNA extracts indicated that all six extraction methods were efficient at inactivating virulent Brucella spp. Real-time PCR analysis using Brucella genus- and species-specific TaqMan assays revealed that use of the MasterPure kit resulted in superior levels of detection from bacterial suspensions, while the MasterPure kit and MagNA Pure Compact performed equally well for extraction of spiked swab samples. This study demonstrated that DNA extraction methodologies differ in their ability to recover Brucella DNA from PBS bacterial suspensions and from swab specimens and, thus, that the extraction method used for a given type of sample matrix can influence the sensitivity of real-time PCR assays for Brucella.