Development and validation of two SYBR green PCR assays and a multiplex real-time PCR for the detection of Shiga toxin-producing Escherichia coli in meat

Advanced diagnostic methods for identification of bacterial foodborne pathogens: contemporary and upcoming challenges

It is a public health imperative to have safe food and water across the population. Foodborne infections are one of the primary causes of sickness and mortality in both developed and developing countries. An estimated 100 million foodborne diseases and 120 000 foodborne illness-related fatalities occur each year in India. Several factors affect foodborne illness, such as improper farming methods, poor sanitary and hygienic conditions at all levels of the food supply chain, the lack of preventative measures in the food processing industry, the misuse of food additives, as well as improper storage and handling. In addition, chemical and microbiological combinations also play a key role in disease development. But recent disease outbreaks indicated that microbial pathogens played a major role in the development of foodborne diseases. Therefore, prompt, rapid, and accurate detection of high-risk food pathogens is extremely vital to warrant the safety of the food items. Conventional approaches for identifying foodborne pathogens are labor-intensive and cumbersome. As a result, a range of technologies for the rapid detection of foodborne bacterial pathogens have been developed. Presently, many methods are available for the instantaneous detection, identification, and monitoring of foodborne pathogens, such as nucleic acid-based methods, biosensor-based methods, and immunological-based methods. The goal of this review is to provide a complete evaluation of several existing and emerging strategies for detecting food-borne pathogens. Furthermore, this review outlines innovative methodologies and their uses in food testing, along with their existing limits and future possibilities in the detection of live pathogens in food.

Conventional and advanced detection techniques of foodborne pathogens: A comprehensive review

Foodborne pathogens are a major public health concern and have a significant economic impact globally. From harvesting to consumption stages, food is generally contaminated by viruses, parasites, and bacteria, which causes foodborne diseases such as hemorrhagic colitis, hemolytic uremic syndrome (HUS), typhoid, acute, gastroenteritis, diarrhea, and thrombotic thrombocytopenic purpura (TTP). Hence, early detection of foodborne pathogenic microbes is essential to ensure a safe food supply and to prevent foodborne diseases. The identification of foodborne pathogens is associated with conventional (e.g., culture-based, biochemical test-based, immunological-based, and nucleic acid-based methods) and advances (e.g., hybridization-based, array-based, spectroscopy-based, and biosensor-based process) techniques. For industrial food applications, detection methods could meet parameters such as accuracy level, efficiency, quickness, specificity, sensitivity, and non-labor intensive. This review provides an overview of conventional and advanced techniques used to detect foodborne pathogens over the years. Therefore, the scientific community, policymakers, and food and agriculture industries can choose an appropriate method for better results.

In-House Validation of Multiplex PCR for Simultaneous Detection of Shiga Toxin-Producing Escherichia coli, Listeria monocytogenes and Salmonella spp. in Raw Meats

The aim of the study was to perform in-house validation of the developed multiplex PCR (mPCR)-based alternative method to detect Shiga toxin-producing Escherichia coli (STEC), Listeria monocytogenes (L. monocytogenes) and Salmonella spp. in raw meats following the ISO 16140-2: 2016. A comparative study of the developed mPCR against the Bacteriological Analytical Manual (BAM) method was evaluated for inclusivity and exclusivity, sensitivity and the relative level of detection (RLOD). Inclusivity levels for each target bacterium were all 100%, while exclusivity for non-target bacteria was 100%. The sensitivity of the developed mPCR was calculated based on the analysis of 72 samples of raw meat. The sensitivity of the developed mPCR was 100%. The RLOD values of the developed mPCR for STEC, L. monocytogenes and Salmonella spp. were 0.756, 1.170 and 1.000, respectively. The developed mPCR showed potential as a tool for the fast, specific and sensitive detection of the three bacteria in the raw meat industry

Reduction of Shiga toxin-producing Escherichia coli in a beef abattoir

The aim of this work was to reinforce actions tending to reduce Shiga toxin-producing Escherichia coli (STEC) in beef products from an Argentinean commercial abattoir implementing Hazard Analysis and Critical Control Point (HACCP) practices. An environmental stx map was built with 421 environmental samples from the slaughter, quartering, cool chamber and deboning sectors (February-May 2013). For stx determination, 125 carcass and 572 anatomical cut samples were used. Based on the environmental stx mapping results, improvement actions were designed and implemented (June and July 2013). After implementing improvement actions, 160 carcass and 477 anatomical cut samples were collected to identify stx and verify the impact of improvement actions (August-December 2013). Our results showed stx-positivity in pre-operational (10.1%) and operational (15.5%) environmental samples and in carcass and beef cut samples before (4.8 and 10.1%; p = 0.144) and after (1.2 and 4.8%; p = 0.0448) implementing improvement actions, respectively. Although improvement actions reduced stx in beef cuts, it is difficult to implement and sustain a system based on stx zero-tolerance only by reinforcing Good Manufacturing Practices, Sanitation Standard Operating Procedures and HACCP practices. The application of combined intervention strategies to reduce STEC in carcasses and beef cuts should be therefore considered.

Multiplex Detection of Salmonella spp., E. coli O157 and L. monocytogenes by qPCR Melt Curve Analysis in Spiked Infant Formula

Food poisoning continue to be a threat in the food industry showing a need to improve the detection of the pathogen responsible for the hospitalization cases and death. DNA-based techniques represent a real advantage and allow the detection of several targets at the same time, reducing cost and time of analysis. The development of new methodology using SYBR Green qPCR for the detection of L. monocytogenes, Salmonella spp. and E. coli O157 simultaneously was developed and a non-competitive internal amplification control (NC-IAC) was implemented to detect reaction inhibition. The formulation and supplementation of the enrichment medium was also optimized to allow the growth of all pathogens. The limit of detection (LoD) 95% obtained was <1 CFU/25 g for E. coli O157, and 2 CFU/25 g for Salmonella spp. and L. monocytogenes and regarding the multiplex detection a LoD 95% of 1.7 CFU/25 g was observed. The specificity, relative sensitivity and accuracy of full methodology were 100% and the use of the NC-IAC allowed the reliability of the results without interfering with the sensitivity of the methodology. The described study proved to obtain results comparable to those of probe-based qPCR, and more economically than classical high resolution melting qPCR, being both important aspects for its implementation in the food industry.

Multiplex PCR for the simultaneous detection of the Enterobacterial gene wecA, the Shiga Toxin genes (stx1 and stx2) and the Intimin gene (eae)

OBJECTIVES

The aetiology of several human diarrhoeas has been increasingly associated with the presence of virulence factors rather than with the bacterial species hosting the virulence genes, exemplified by the sporadic emergence of new bacterial hosts. Two important virulence factors are the Shiga toxin (Stx) and the E. coli outer membrane protein (Eae) or intimin, encoded by the stx and eae genes, respectively. Although several polymerase chain reaction (PCR) protocols target these virulence genes, few aim at detecting all variants or have an internal amplification control (IAC) included in a multiplex assay. The objective of this work was to develop a simple multiplex PCR assay in order to detect all stx and eae variants, as well as to detect bacteria belonging to the Enterobacteriaceae, also used as an IAC.

RESULTS

The wecA gene coding for the production of the Enterobacterial Common Antigen was used to develop an Enterobacteriaceae specific qPCR. Universal primers for the detection of stx and eae were developed and linked to a wecA primer pair in a robust triplex PCR. In addition, subtyping of the stx genes was achieved by subjecting the PCR products to restriction digestion and semi-nested duplex PCR, providing a simple screening assay for human diarrhoea diagnostic.

Multiplex real-time PCR assay for detection of Escherichia coli O157:H7 and screening for non-O157 Shiga toxin-producing E. coli

Background

Shiga toxin-producing Escherichia coli (STEC), including E. coli O157:H7, are responsible for numerous foodborne outbreaks annually worldwide. E. coli O157:H7, as well as pathogenic non-O157:H7 STECs, can cause life-threating complications, such as bloody diarrhea (hemolytic colitis) and hemolytic-uremic syndrome (HUS). Previously, we developed a real-time PCR assay to detect E. coli O157:H7 in foods by targeting a unique putative fimbriae protein Z3276. To extend the detection spectrum of the assay, we report a multiplex real-time PCR assay to specifically detect E. coli O157:H7 and screen for non-O157 STEC by targeting Z3276 and Shiga toxin genes (stx1 and stx2). Also, an internal amplification control (IAC) was incorporated into the assay to monitor the amplification efficiency.

Methods

The multiplex real-time PCR assay was developed using the Life Technology ABI 7500 System platform and the standard chemistry. The optimal amplification mixture of the assay contains 12.5 μl of 2 × Universal Master Mix (Life Technology), 200 nM forward and reverse primers, appropriate concentrations of four probes [(Z3276 (80 nM), stx1 (80 nM), stx2 (20 nM), and IAC (40 nM)], 2 μl of template DNA, and water (to make up to 25 μl in total volume). The amplification conditions of the assay were set as follows: activation of TaqMan at 95 °C for 10 min, then 40 cycles of denaturation at 95 °C for 10 s and annealing/extension at 60 °C for 60 s.

Results

The multiplex assay was optimized for amplification conditions. The limit of detection (LOD) for the multiplex assay was determined to be 200 fg of bacterial DNA, which is equivalent to 40 CFU per reaction which is similar to the LOD generated in single targeted PCRs. Inclusivity and exclusivity determinants were performed with 196 bacterial strains. All E. coli O157:H7 (n = 135) were detected as positive and all STEC strains (n = 33) were positive for stx1, or stx2, or stx1 and stx2 (Table 1). No cross reactivity was detected with Salmonella enterica, Shigella strains, or any other pathogenic strains tested.

Conclusions

A multiplex real-time PCR assay that can rapidly and simultaneously detect E. coli O157:H7 and screen for non-O157 STEC strains has been developed and assessed for efficacy. The inclusivity and exclusivity tests demonstrated high sensitivity and specificity of the multiplex real-time PCR assay. In addition, this multiplex assay was shown to be effective for the detection of E. coli O157:H7 from two common food matrices, beef and spinach, and may be applied for detection of E. coli O157:H7 and screening for non-O157 STEC strains from other food matrices as well.

A modifiable microarray-based universal sensor: providing sample-to-results automation

A microfluidic system consisting of generic single use cartridges which interface with a workstation allows the automatic performance of all necessary sample preparation, PCR analysis and interpretation of multiplex PCR assays. The cartridges contain a DNA array with 20 different 16mer DNA “universal” probes immobilized at defined locations. PCR amplicons can be detected via hybridization of user-defined “reporter” probes that are complementary at their 3′ termini to one or more of the universal probes and complementary to the target amplicons at their 5′ termini. The system was able to detect single-plex and multiplex PCR amplicons from various infectious agents as well as wild type and mutant alleles of single nucleotide polymorphisms. The system's ease of use was further demonstrated by converting a published PCR assay for the detection of Mycobacterium genitalium in a fully automated manner. Excellent correlation between traditional manual methods and the automated analysis performed by the workstation suggests that the system can provide a means to easily design and implement a variety of customized PCR-based assays. The system will be useful to researchers or clinical investigators seeking to develop their own user defined assays. As the U.S. FDA continues to pursue regulatory oversight of LDTs, the system would also allow labs to continue to develop compliant assays.