Microwave-assisted synthesis of Ag/Ag2SO4/ZnO nanostructures for efficient visible-light-driven photocatalysis

Enhancing photodegradation of thiamethoxam insecticide using SnS2/NCL as a photocatalyst: Mechanistic insights and environmental implications

The current research highlights the fabrication of a novel SnS2/CO32-@Ni-Co LDH (SnS2/NCL) by precipitating Ni-Co LDH over hydrothermally synthesized SnS2 nanoparticles for the enhanced degradation of thiamethoxam (THM) insecticide through the advanced oxidation process. The effect of several reaction parameters was optimized, and a maximum degradation of 98.1 ± 1.2 % with a rate constant of 0.0541 min-1 of 10 ppm THM was reached at a catalyst loading of 0.16 gL-1 using 0.3 mM of H2O2 within 70 min of visible light irradiation. The effect of metal cations, inorganic anions, dissolved organic matter, organic compounds and water samples on the photodegradation performance of SnS2/NCL nanocomposite was also examined to evaluate the prepared photocatalyst's suitability for use in actual wastewater conditions. The metal cations blocked the active sites of the photocatalyst and reduced the degradation efficiency except for Fe2+ ions, since it is a Fenton reagent and increased the production of hydroxyl radicals. Inorganic anions are the scavengers of hydroxyl radicals and hinder photocatalytic activity. Meanwhile, lake water containing varying degrees of co-existing ions shows the lowest degradation efficiency among other water samples. The SnS2/NCL nanocomposite could be reused for five cycles while maintaining a photocatalytic efficiency of 83.6 ± 0.3 % in the fifth run. The prepared SnS2/NCL nanocomposite also showed excellent photodegradation of several other emerging organic pollutants with an efficiency of over 80 % under optimum conditions. Incorporating Ni-Co LDH with SnS2 helped to delocalize photoinduced charges, leading to increased photocatalytic activity and a slower electron-hole recombination rate. The present research highlights the photocatalytic activity of SnS2/NCL photocatalysts for the photocatalytic degradation of emerging contaminants from wastewater.

RSM approach for process optimization of the photodegradation of congo red by a novel NiCo2S4/chitosan photocatalyst

The current study reported a facile co-precipitation technique for synthesizing novel NiCo2S4/chitosan nanocomposite. The photocatalytic activity of the prepared nanocomposite was evaluated using congo red (CR) dye as a target pollutant. The central composite design was employed to examine the impact of different reaction conditions on CR dye degradation. This study selected the pH, photocatalyst loading, initial CR concentration and reaction time as reaction parameters, while the degradation efficiency (%) was selected as the response. A desirability factor of 1 suggested the adequacy of the model. Maximum degradation of 93.46% of 35 ppm dye solution was observed after 60 min of visible light irradiation. The response to surface methodology (RSM) is a helpful technique to predict the optimum reaction conditions of the photodegradation of CR dye. Moreover, NiCo2S4/Ch displayed high recyclability and reusability up to four consecutive cycles. The present study suggests that the prepared NiCo2S4/chitosan nanocomposite could prove to be a viable photocatalyst for the treatment of dye-contaminated wastewater.

Bandgap engineering approach for synthesising photoactive novel Ag/HAp/SnS2 for removing toxic anti-fungal pharmaceutical from aqueous environment

The present work shed light on synthesising a novel ternary Z-scheme Ag/HAp/SnS2 (AHS) nano photocatalyst to degrade metronidazole (MTZ) in wastewater through H2O2-assisted AOP under natural sunlight. HAp extracted from the fish scales of rohu fish through alkaline treatment was decorated with Ag nanoparticles using ascorbic acid as a bio-reductant. Tin disulphide (SnS2) was anchored over Ag/HAp to prevent agglomeration and enhance photocatalytic activity by delaying the electron-hole recombination rate. After 45 min of irradiation, a degradation efficiency of 98.85 ± 1.86% for 15 ppm MTZ could be achieved. The performance of the prepared photocatalyst in real wastewater was investigated by introducing several metal cations and anions in the photodegradation process. The degradation products were identified by HRLCMS analysis, and the breakdown mechanism of MTZ was proposed. The present study enlightens the importance of SnS2-based photocatalysts for organic pollutant degradation under natural sunlight through an advanced oxidation process. The characterization results showed that the enhanced photodegradation efficiency of AHS is attributed to the formation of an all-solid-state Z-scheme heterojunction with Ag nanoparticles acting as charge transfer medium and as electron accumulators helping in delaying charge recombination.

Biowaste derived hydroxyapatite embedded on two-dimensional g-C3N4 nanosheets for degradation of hazardous dye and pharmacological drug via Z-scheme charge transfer

In recent years, there has been an increase in demand for inexpensive biowaste-derived photocatalysts for the degradation of hazardous dyes and pharmacological drugs. Here, we developed eggshell derived hydroxyapatite nanoparticles entrenched on two-dimensional g-C₃N₄ nanosheets. The structural, morphological and photophysical behavior of the materials is confirmed through various analytical techniques. The photocatalytic performance of the highly efficient HAp/gC₃N₄ photocatalyst is evaluated against methylene blue (MB) and doxycycline drug contaminates under UV–visible light exposure. The HAp/gC₃N₄ photocatalyst exhibit excellent photocatalytic performance for MB dye (93.69%) and doxycycline drug (83.08%) compared to bare HAp and g-C₃N₄ nanosheets. The ultimate point to note is that the HAp/gC₃N₄ photocatalyst was recycled in four consecutive cycles without any degradation performance. Superoxide radicals play an important role in degradation performance, which has been confirmed by scavenger experiments. Therefore, the biowaste-derived HAp combined with gC₃N₄ nanosheets is a promising photocatalyst for the degradation of hazardous dyes and pharmacological drug wastes.

Strategies to Enhance ZnO Photocatalyst's Performance for Water Treatment: A Comprehensive Review

Despite the photocatalytic organic pollutant degradation using ZnO started in 1910-1911, many challenges are still ahead, and several critical issues have to be addressed. Large band gap, and short life-time of photogenerated electrons and holes are critical issues negatively affect the photocatalytic activity of ZnO. Various approaches have been introduced to overcome these issues including intrinsic doping, extrinsic doping, and heterostructure. This review introduces unique and deep insights into tuning of the photocatalytic activity of ZnO. It starts by description of how to tune the photocatalytic activity of pristine ZnO through tuning its morphology, surface area, exposed face, and intrinsic defects. Afterward, the review explains how the Z-scheme approach succeed to address the redox weakened issue of heterojunction approach. In general, this review provides a clear image that helps the researcher to tune the photocatalytic activity of pristine ZnO and its heterostructure.

Hexavalent Chromium as a Smart Switch for Peroxidase-like Activity Regulation via the Surface Electronic Redistribution of Silver Nanoparticles Anchored on Carbon Spheres

Although some ions, due to their unique chemical properties, can regulate the enzyme-like activity of nanomaterials, it is still a huge challenge to explore the mechanism of regulation. Herein, we found that Cr⁶⁺ (CrO₄^2-) as a smart switch can significantly increase the peroxidase-like (POD-like) activity of silver nanoparticles (Ag NPs), which were anchored efficiently on carbon spheres (Cal-CS/PEG/Ag) using amino-modified poly(ethylene glycol) (PEG) as a bridge. Density functional theory (DFT) calculations demonstrated that the addition of Cr⁶⁺ can not only adjust the surface electronic redistribution of Ag atoms but also improve the geometric structure of the adsorbed intermediate, which resulted in the optimization of free energy and change of bond lengths in the catalytic reaction process, increasing the POD-like activity of Cal-CS/PEG/Ag. Based on the Cr⁶⁺-increased POD-like activity of Cal-CS/PEG/Ag, we successfully constructed a visual sensor of Cr⁶⁺ along with quantitative analysis by the UV spectrum. The sensor has good selectivity for other 29 interfering ions and molecules with a detection limit of 79 nM. In this work, the detailed mechanism of the Cr⁶⁺-increased POD-like activity of Ag NPs was studied and a new possibility for the rational design of ion visual sensors using nanomaterials was proposed.

Shape tailoring of AgBr microstructures: effect of the cations of different bromide sources and applied surfactants

Investigations regarding AgBr-based photocatalysts came to the center of attention due to their high photosensitivity. The present research focuses on the systematic investigation regarding the effect of different alkali metal cation radii and surfactants/capping agents applied during the synthesis of silver-halides. Their morpho-structural and optical properties were determined via X-ray diffractometry, diffuse reflectance spectroscopy, scanning electron microscopy, infrared spectroscopy, and contact angle measurements. The semiconductors' photocatalytic activities were investigated using methyl orange as the model contaminant under visible light irradiation. The correlation between the photocatalytic activity and the obtained optical and morpho-structural properties was analyzed using generalized linear models. Moreover, since the (photo)stability of Ag-based photoactive materials is a crucial issue, the stability of catalysts was also investigated after the degradation process. It was concluded that (i) the photoactivity of the samples could be fine-tuned using different precursors and surfactants, (ii) the as-obtained AgBr microcrystals were transformed into other Ag-containing composites during/after the degradation, and (iii) elemental bromide did not form during the degradation process. Thus, the proposed mechanisms in the literature (for the degradation of MO using AgBr) must be reconsidered.

Systematic investigation of the effect of different alkali metal cation radii and shape-tailoring agents applied during the synthesis of AgBr-based photocatalysts.

A Review of Microwave Synthesis of Zinc Oxide Nanomaterials: Reactants, Process Parameters and Morphoslogies

Zinc oxide (ZnO) is a multifunctional material due to its exceptional physicochemical properties and broad usefulness. The special properties resulting from the reduction of the material size from the macro scale to the nano scale has made the application of ZnO nanomaterials (ZnO NMs) more popular in numerous consumer products. In recent years, particular attention has been drawn to the development of various methods of ZnO NMs synthesis, which above all meet the requirements of the green chemistry approach. The application of the microwave heating technology when obtaining ZnO NMs enables the development of new methods of syntheses, which are characterised by, among others, the possibility to control the properties, repeatability, reproducibility, short synthesis duration, low price, purity, and fulfilment of the eco-friendly approach criterion. The dynamic development of materials engineering is the reason why it is necessary to obtain ZnO NMs with strictly defined properties. The present review aims to discuss the state of the art regarding the microwave synthesis of undoped and doped ZnO NMs. The first part of the review presents the properties of ZnO and new applications of ZnO NMs. Subsequently, the properties of microwave heating are discussed and compared with conventional heating and areas of application are presented. The final part of the paper presents reactants, parameters of processes, and the morphology of products, with a division of the microwave synthesis of ZnO NMs into three primary groups, namely hydrothermal, solvothermal, and hybrid methods.

Towards the Enhancement in Photocatalytic Performance of Ag3PO4 Nanoparticles through Sulfate Doping and Anchoring on Electrospun Nanofibers

Present work reports the enhancement in photocatalytic performance of Ag3PO4 nanoparticles through sulfate doping and anchoring on Polyacrylonitrile (PAN)-electrospun nanofibers (SO42--Ag3PO4/PAN-electrospun nanofibers) via electrospinning followed by ion-exchange reaction. Morphology, structure, chemical composition, and optical properties of the prepared sample were characterized using XRD, FESEM, FTIR, XPS, and DRS. The anchoring of SO42--Ag3PO4 nanoparticles on the surface of PAN-electrospun nanofibers was evidenced by the change in color of the PAN nanofibers mat from white to yellow after ion-exchange reaction. FESEM analysis revealed the existence of numerous SO42--Ag3PO4 nanoparticles on the surface of PAN nanofibers. Photocatalytic activity and stability of the prepared sample was tested for the degradation of Methylene blue (MB) and Rhodamine B (RhB) dyes under visible light irradiation for three continuous cycles. Experimental results showed enhanced photodegradation activity of SO42--Ag3PO4/PAN-electrospun nanofibers compared to that of sulfate undoped sample (Ag3PO4/PAN-electrospun nanofibers). Doping of SO42- into Ag3PO4 crystal lattice could increase the photogenerated electron-hole separation capability, and PAN nanofibers served as support for nanoparticles to prevent from agglomeration.

Enhanced Antibacterial Property of Sulfate-Doped Ag3PO4 Nanoparticles Supported on PAN Electrospun Nanofibers

Heterojunction nanofibers of PAN decorated with sulfate doped Ag₃PO₄ nanoparticles (SO₄²⁻-Ag₃PO₄/PAN electrospun nanofibers) were successfully fabricated by combining simple and versatile electrospinning technique with ion exchange reaction. The novel material possessing good flexibility could exhibit superior antibacterial property over sulfate undoped species (Ag₃PO₄/PAN electrospun nanofibers). FESEM, XRD, FTIR, XPS and DRS were applied to characterize the morphology, phase structure, bonding configuration, elemental composition, and optical properties of the as fabricated samples. FESEM characterization confirmed the successful incorporation of SO₄²⁻-Ag₃PO₄ nanoparticles on PAN electrospun nanofibers. The doping of SO₄²⁻ ions into Ag₃PO₄ crystal lattice by replacing PO₄³⁻ ions can provide sufficient electron-hole separation capability to the SO₄²⁻-Ag₃PO₄/PAN heterojunction to generate reactive oxygen species (ROS) under visible light irradiation and enhances its antibacterial performance. Finally, we hope this work may offer a new paradigm to design and fabricate other types of flexible self-supporting negative-ions-doped heterojunction nanofibers using electrospinning technique for bactericidal applications.

A self-assembled urchin-like TiO2@Ag–CuO with enhanced photocatalytic activity toward tetracycline hydrochloride degradation

A two-step approach based on alloy ribbon for preparing a ternary hetero-junction with enhanced photocatalytic activity toward tetracycline hydrochloride degradation.

Highly efficient and stable p-LaFeO3/n-ZnO heterojunction photocatalyst for phenol degradation under visible light irradiation

A series of catalysts with p-LaFeO₃/n-ZnO heterostructure were designed and prepared by hydrothermal method. The structure, surface topographies, optical properties and interfacial interactions of these photocatalysts were analyzed by XRD, SEM, TEM, PL, Uv-vis DRS, XPS, COD, TOC etc., indicating that p-n heterojunction formed at the interface between p-LaFeO₃ and n-ZnO, which enhanced the photocatalytic activity. Among them, the 20%-p-LaFeO₃/n-ZnO composite exhibits the best activity for the phenol degradation under visible light. The superior photocatalytic activity of the heterojunction photocatalyst is mainly attributed to the formation of p-n heterojunction which leads to an efficient separation of photogenerated electron-hole pairs. Besides, the 20%-p-LaFeO₃/n-ZnO heterojunction photocatalyst shows the excellent photocatalytic stability after 4 cycles. And from the free radical capture experiment, the degradation of phenol is dominated by the oxidation reaction of hydroxyl radicals and direct hole oxidation. What's more, certain intermediates were detected by HPLC and 3D-EEMs. Therefore, a photocatalytic mechanism of the 20%-p-LaFeO₃/n-ZnO p-n heterojunction catalyst for phenol degradation under visible light irradiation was proposed.

Using CuO-MnOx/AC-H as catalyst for simultaneous removal of Hg° and NO from coal-fired flue gas

A series of CuO-MnO_x modified catalysts were prepared, and proposed for simultaneous removal of Hg° and NO from flue gas. As Mn loading value was 5%, the high value of 90% Hg and 60% NO_x were removed efficiently. With gradual increasing of reaction temperature, the mercury removal efficiency (Mercury RE) first increased to 92% then decreased slightly, while NO_x removal efficiency (NO_x RE) exhibited a trend of continuous increase. O₂ had promotional effect on the double pollutants removal, while NH₃ had slightly negative effect on Hg° removal. As 5% O₂ was added into system, the removal efficiency of Hg and NO_x rose by 30% and 47%, respectively. Unfortunately, Mercury RE decreased to 90% in the presence of 500 ppm NH₃. Overall, superior Mercury RE (>90%) and NO_x RE (78%) were performed over 8%CuO-5%MnO_x/AC-H at 200 °C. XRD results revealed calcination affected catalysts activity by playing a role in active components formation at different temperature. In XPS spectra, new formation of HgO and Hg° adsorption on spent catalysts revealed the possible reaction processes that the conversion of CuO and MnO₂ on fresh catalyst to other species benefited HgO formation. The removal mechanism might be a combination of Langmuir-Hinshelwood and Mars-van-Krevelen mechanism.

Principles and Advantages of Microwave-Assisted Methods for the Synthesis of Nanomaterials for Water Purification

Nanomaterials are the pillars of nanoscience and nanotechnology and to realize their full potential in various potential applications, synthetic methodologies/routes need to be established that are simple, fast and cost-effective. Wet-chemical approaches for nanomaterial synthesis have proven to be among the most versatile and effective routes to finely tailor nanocrystals with varying compositional and architectural complexity. Microwave-assisted solution route represents an efficient wet-chemical approach for the synthesis of nanomaterials that offers additional advantages, such as rapid volumetric heating, high reaction rates, size and shape control by tuning reaction parameters, and energy efficiency. In addition, the homogenous heating of the reactants in microwave synthesis minimizes thermal gradients and provides uniform nucleation and growth conditions that leads to the formation of nanomaterials with uniform size distribution. This chapter deals with the basics of microwave chemistry and its applications towards the synthesis of nanomaterials for catalytic applications.

Novel g-C3N4/Ag2SO4 nanocomposites: Fast microwave-assisted preparation and enhanced photocatalytic performance towards degradation of organic pollutants under visible light

Graphite carbon nitride (g-C3N4)/Ag2SO4 nanocomposites, as highly enhanced visible-light-driven photocatalysts, were prepared by a fast microwave-assisted method. The resulting g-C3N4/Ag2SO4 nanocomposites were characterized by X-ray diffraction, energy dispersive analysis of X-rays, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, Fourier transform-infrared spectroscopy, and ultraviolet-visible diffuse reflectance spectroscopy techniques. Moreover, charge separation efficiency was studied by photoluminescence measurements. Photocatalytic activity of the g-C3N4/Ag2SO4 (40%) nanocomposite in degradation of rhodamine B, methylene blue, and fuchsine is about 6, 3.8, and 3.3-folds greater than that of the g-C3N4 under visible-light illumination. Effect of microwave irradiation time, calcination temperature, and scavengers of the reactive species on the degradation reaction was also evaluated. The enhanced photocatalytic activity was mainly ascribed to the matching band energies of g-C3N4 and Ag2SO4 which leads to an improved separation of photogenerated electron-hole pairs. Finally, the optimized nanocomposite was recycled for five times without remarkable decrease of the photocatalytic activity.

Novel magnetically separable ZnO/AgBr/Fe3O4/Ag3VO4 nanocomposites with tandem n–n heterojunctions as highly efficient visible-light-driven photocatalysts

In the present work, novel magnetically separable ZnO/AgBr/Fe₃O₄/Ag₃VO₄ nanocomposites with different weight percentages of Ag₃VO₄ were successfully prepared.