A new functionalized ionic liquid for efficient glucose conversion to 5-hydroxymethyl furfural and levulinic acid

Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.

Catalytic conversion of cellulosic biomass to harvest high-valued organic acids

Catalytic conversion of biomass provides an alternative way for the production of organic acids from renewable feedstocks. The emerging process contains complex reactions and strategies to cut down those complex biogenic materials into target molecules. Here, we review the catalytic conversion of cellulosic biomass toward high-valued organic acids. This work has summarized the key controlling reactions which lead toward formic acid, glycolic acid, or sugar acids in oxidative conditions and the main pathways for lactic acid or levulinic acid in the anaerobic environment from cellulosic biomass and its derivatives. We evaluate and compare different strategies and methods such as one-pot and two-step conversion. Additionally, the optimization of catalytic reactions has been discussed to realize the design of C-C coupling reactions, the development of multifunctional materials, and new efficient system. In all, this article gives an insight guide to precisely convert cellulosic biomass into target organic acids.

Effect of the Wells–Dawson phosphomolybdic heteropolyacid on the conversion of glucose into glycolic acid

The Wells–Dawson phosphomolybdic heteropolyacid had high activity and selectivity in the epimerization of glucose into mannose and the [2 + 4] retro-aldol reaction of glucose/mannose.

A review on solid acid catalysis for sustainable production of levulinic acid and levulinate esters from biomass derivatives

Biomass is a kind of renewable and abundant resource that can be seen as an important candidate to solve the energy crisis. Levulinic acid (LA) and levulinate esters (LEs) have been widely researched as biomass-based platform compounds. In recent years, efficient, green, and environment-friendly solid acid catalysts have been developed for the fast production and resolution of the problems, such as low yield, high equipmental requirements, and difficulty in product separation, in the preparation of LA and LE from biomass. In this paper, the preparation routes of LA and LEs from various raw materials are introduced, and the solid acid catalysts involved in their production are emphatically reviewed. The challenges and prospects in LA and LE production from biomass are proposed to achieve a more economical and energy efficient process with the concept of sustainable development in the future.

Synthesis of a sulfated-group-riched carbonaceous catalyst and its application in the esterification of succinic acid and fructose dehydration to form HMF

A novel sulfated-group-riched sulfonated carbonaceous catalyst with high acidic strength and adjustable ratio of acidic groups was designed in the paper, where glucose and benzyl chloride were hydrothermally carbonized first followed by sulfonation treatment. Various physicochemical techniques were used to characterize the catalyst such as IR, 13C MAS NMR and XPS spectra, NH3-TPD, XRD patterns and TG curve. Then, it was applied in the esterification of succinic acid and fructose dehydration to form HMF. Compared to commercial Amberlyst-15 catalyst, such carbonaceous solid acid exhibited excellent catalytic activity and thermal stability, which was attributed to its higher amount of sulfonic acid group.

Catalytic Conversion of Glucose into Levulinic Acid Using 2-Phenyl-2-Imidazoline Based Ionic Liquid Catalyst

Levulinic acid (LA) is an industrially important product that can be catalytically valorized into important value-added chemicals. In this study, hydrothermal conversion of glucose into levulinic acid was attempted using Brønsted acidic ionic liquid catalyst synthesized using 2-phenyl-2-imidazoline, and 2-phenyl-2-imidazoline-based ionic liquid catalyst used in this study was synthesized in the laboratory using different anions (NO₃, H₂PO₄, and Cl) and characterized using ¹H NMR, TGA, and FT-IR spectroscopic techniques. The activity trend of the Brønsted acidic ionic liquid catalysts synthesized in the laboratory was found in the following order: [C₄SO₃HPhim][Cl] > [C₄SO₃HPhim][NO₃] > [C₄SO₃HPhim][H₂PO₄]. A maximum 63% yield of the levulinic acid was obtained with 98% glucose conversion at 180 °C and 3 h reaction time using [C₄SO₃HPhim][Cl] ionic liquid catalyst. The effect of different reaction conditions such as reaction time, temperature, ionic liquid catalyst structures, catalyst amount, and solvents on the LA yield were investigated. Reusability of [C₄SO₃HPhim][Cl] catalyst up to four cycles was observed. This study demonstrates the potential of the 2-phenyl-2-imidazoline-based ionic liquid for the conversion of glucose into the important platform chemical levulinic acid.

Production of Levulinic Acid from Cellulose and Cellulosic Biomass in Different Catalytic Systems

The reasonable and effective use of lignocellulosic biomass is an important way to solve the current energy crisis. Cellulose is abundant in nature and can be hydrolyzed to a variety of important energy substances and platform compounds—for instance, glucose, 5-hydroxymethylfurfural (HMF), levulinic acid (LA), etc. As a chemical linker between biomass and petroleum processing, LA has become an ideal feedstock for the formation of liquid fuels. At present, some problems such as low yield, high equipment requirements, difficult separation, and serious environmental pollution in the production of LA from cellulose have still not been solved. Thus, a more efficient and green catalytic system of this process for industrial production is highly desired. Herein, we focus on the reaction mechanism, pretreatment, and catalytic systems of LA from cellulose and cellulosic biomass, and a series of existing technologies for producing LA are reviewed. On the other hand, the industrial production of LA is discussed in depth to improve the yield of LA and make the process economical and energy efficient. Additionally, practical suggestions for the enhancement of the stability and efficiency of the catalysts are also proposed. The use of cellulose to produce LA is consistent with the concept of sustainable development, and the dependence on fossil resources will be greatly reduced through the realization of this process route.

Hydrothermal conversion of glucose to levulinic acid using multifunctional ionic liquids: effects of metal ion co-catalysts on the product yield

An efficient catalytic system comprising Bronsted acidic ionic liquids and Lewis acidic metal salts for hydrothermal glucose conversion to platform chemicals.

Efficient Hydrolytic Breakage of β-1,4-Glycosidic Bond Catalyzed by a Difunctional Magnetic Nanocatalyst

A novel difunctional magnetic nanocatalyst (DMNC) was prepared and used to catalyse the hydrolytic breakage of β-1,4-glycosidic bonds. The functional nanoparticle displayed excellent catalytic activity for hydrolysis of cellobiose to glucose under moderate conditions. The conversion of cellobiose and yield of glucose could reach 95.3 and 91.1 %, respectively, for a reaction time of 6 h at pH 4.0 and 130°C. DMNC was also an efficient catalyst for the hydrolysis of cellulose: 53.9 % microcrystalline cellulose was hydrolyzed, and 45.7 % reducing sugar was obtained at pH 4.0 and 130°C after 10 h. The magnetic catalyst could be recycled and reused five times without significant loss of catalytic activity.

A new approach of probe sonication assisted ionic liquid conversion of glucose, cellulose and biomass into 5-hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) has been identified as a promising biomass-derived platform chemical. In this study, one pot production of HMF was studied in ionic liquid (IL) under probe sonication technique. Compared with the conventional heating technique, the use of probe ultrasonic irradiation reduced the reaction time from hours to minutes. Glucose, cellulose and local bamboo, treated with ultrasonic, produced HMF in the yields of 43%, 31% and 13% respectively, within less than 10min. The influence of various parameters such as acoustic power, reaction time, catalysts and glucose loading were studied. About 40% HMF yield at glucose conversion above 90% could be obtained with 2% of catalyst in 3min. Negligible amount of soluble by-product was detected, and humin formation could be controlled by adjusting the different process parameters. Upon extraction of HMF, the mixture of ionic liquid and catalyst could be reused and exhibited no significant reduction of HMF yield over five successive runs. The purity of regenerated [C₄C₁im]Cl and HMF was confirmed by NMR spectroscopy, indicating neither changes in the chemical structure nor presence of any major contaminants during the conversion under ultrasonic treatment. ¹³C NMR suggests that [C₄C₁im]Cl/CrCl₃ catalyses mutarotation of α-glucopyranose to β-glucopyranose leading to isomerization and finally conversion to HMF. The experimental results demonstrate that the use of probe sonication technique for conversion to HMF provides a positive process benefit.

Catalytic Transformation of Lignocellulose into Chemicals and Fuel Products in Ionic Liquids

Innovative valorization of naturally abundant and renewable lignocellulosic biomass is of great importance in the pursuit of a sustainable future and biobased economy. Ionic liquids (ILs) as an important kind of green solvents and functional fluids have attracted significant attention for the catalytic transformation of lignocellulosic feedstocks into a diverse range of products. Taking advantage of some unique properties of ILs with different functions, the catalytic transformation processes can be carried out more efficiently and potentially with lower environmental impacts. Also, a new product portfolio may be derived from catalytic systems with ILs as media. This review focuses on the catalytic chemical conversion of lignocellulose and its primary ingredients (i.e., cellulose, hemicellulose, and lignin) into value-added chemicals and fuel products using ILs as the reaction media. An outlook is provided at the end of this review to highlight the challenges and opportunities associated with this interesting and important area.