Monitoring the Rhizopus oryzae lipase catalyzed hydrolysis of castor oil by ATR-FTIR spectroscopy

On the Unique Morphology and Elastic Properties of Multi-Jet Electrospun Cashew Gum-Based Fiber Mats

This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high-molecular-weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is a low-cost, non-toxic heteropolysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution was needed to produce more stable and defect-free straight and smooth fibers. Additionally, the inclusion of glycerol as a plasticizer was required to overcome material fragility. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Furthermore, the resulting oriented fiber mats exhibited unexpectedly high elongation at break under ambient conditions. These findings underscore the potential of this bio-polysaccharide-based formulation for non-direct water contact applications that demand elastic properties.

Study of Processing Conditions during Enzymatic Hydrolysis of Deer By-Product Tallow for Targeted Changes at the Molecular Level and Properties of Modified Fats

In most cases, the unused by-products of venison, including deer tallow, are disposed of in rendering plants. Deer tallow contains essential fatty acids and can be used to prepare products for everyday food and advanced applications. This work aimed to process deer tallow into hydrolyzed products using microbial lipases. A Taguchi design with three process factors at three levels was used to optimize the processing: amount of water (8, 16, 24%), amount of enzyme (2, 4, 6%), and reaction time (2, 4, 6 h). The conversion of the tallow to hydrolyzed products was expressed by the degree of hydrolysis. The oxidative stability of the prepared products was determined by the peroxide value and the free fatty acids by the acid value; further, color change, textural properties (hardness, spreadability, stickiness, and adhesiveness), and changes at the molecular level were observed by Fourier transform infrared spectroscopy (FTIR). The degree of hydrolysis was 11.8-49.6%; the peroxide value ranged from 12.3 to 29.5 µval/g, and the color change of the samples expressed by the change in the total color difference (∆E*) was 1.9-13.5. The conditions of enzymatic hydrolysis strongly influenced the textural properties: hardness 25-50 N, spreadability 20-40 N/s, and stickiness < 0.06 N. FTIR showed that there are changes at the molecular level manifested by a decrease in ester bonds. Enzymatically hydrolyzed deer tallow is suitable for preparing cosmetics and pharmaceutical matrices.

Evaluation of Enzyme Agarose Gels for Cleaning Complex Substrates in Cultural Heritage

This study starts from the need to remove a mix of proteins, oils and natural resin, called beverone in the Italian literature, from the back of canvas paintings. The aim of this study is to develop and evaluate the effectiveness of two different agarose/enzyme gels containing, respectively, a trypsin derived from porcine pancreas and a lipase from Candida rugosa, both in an aqueous solution of deoxycholic acid-triethanolamine soap. Enzymes were selected because of their action on peptide and ester bonds, effectiveness at maintaining a weak alkaline pH and low cost. Several series of model samples, resulting from a combination of rabbit skin glue, linseed oil and colophony, were prepared to test the enzyme gels with two different values for each of the following variables: agarose concentration, application modes and time of application. Measurements of weight loss after the gel application and Fourier transform infrared analysis were conducted to underline the hydrolysis occurring due to the enzyme gels and their effectiveness. Results confirmed what has been found in the literature and improved our knowledge about the action of agarose enzyme gels on complex substrates (hydrophilic/hydrophobic). The gels applied fluidly, with a longer contact time and a lower agarose concentration, are more effective. Furthermore, trypsin gels provided better results on substrates with oil and glue, while lipase gels turned out to be more effective on substrates made of a mix of oil, glue and colophony.

Efficiency of an alkaline, thermostable, detergent compatible, and organic solvent tolerant lipase with hydrolytic potential in biotreatment of wastewater

Discharging the tannery wastewater into the environment is a serious challenge worldwide due to the release of severe recalcitrant pollutants such as oil compounds and organic materials. The biological treatment through enzymatic hydrolysis is a cheap and eco-friendly method for eliminating fatty substances from wastewater. In this context, lipases can be utilized for bio-treatment of wastewater in multifaceted industrial applications. To overcome the limitations in removing pollutants in the effluent, we aimed to identify a novel robust stable lipase (PersiLipase1) from metagenomic data of tannery wastewater for effective bio-degradation of the oily wastewater pollution. The lipase displayed remarkable thermostability and maintained over 81 % of its activity at 60 °C.After prolonged incubation for 35 days at 60°C, the PersiLipase1 still maintained 53.9 % of its activity. The enzyme also retained over 67 % of its activity in a wide range of pH (4.0 to 9.0). In addition, PersiLipase1 demonstrated considerable tolerance toward metal ions and organic solvents (e.g., retaining >70% activity after the addition of 100 mM of chemicals). Hydrolysis of olive oil and sheep fat by this enzyme showed 100 % efficiency. Furthermore, the PersiLipase1 proved to be efficient for biotreatment of oil and grease from tannery wastewater with the hydrolysis efficiency of 90.76 % ± 0.88. These results demonstrated that the metagenome-derived PersiLipase1 from tannery wastewater has a promising potential for the biodegradation and management of oily wastewater pollution.

In situ monitoring of galactolipid digestion by infrared spectroscopy in both model micelles and spinach chloroplasts

Galactolipids are the main lipids from plant photosynthetic membranes and they can be digested by pancreatic lipase related protein 2 (PLRP2), an enzyme found in the pancreatic secretion in many animal species. Here, we used transmission Fourier-transform infrared spectroscopy (FTIR) to monitor continuously the hydrolysis of galactolipids by PLRP2, in situ and in real time. The method was first developed with a model substrate, a synthetic monogalactosyl diacylglycerol with 8-carbon acyl chains (C8-MGDG), in the form of mixed micelles with a bile salt, sodium taurodeoxycholate (NaTDC). The concentrations of the residual substrate and reaction products (monogalactosylmonoglyceride, MGMG; monogalactosylglycerol, MGG; octanoic acid) were estimated from the carbonyl and carboxylate vibration bands after calibration with reference standards. The results were confirmed by thin layer chromatography analysis (TLC) and specific staining of galactosylated compounds with thymol and sulfuric acid. The method was then applied to the lipolysis of more complex substrates, a natural extract of MGDG with long acyl chains, micellized with NaTDC, and intact chloroplasts isolated from spinach leaves. After a calibration performed with α-linolenic acid, the main fatty acid (FA) found in plant galactolipids, FTIR allowed quantitative measurement of chloroplast lipolysis by PLRP2. A full release of FA from membrane galactolipids was observed, that was not dependent on the presence of bile salts. Nevertheless, the evolution of amide vibration band in FTIR spectra suggested the interaction of membrane proteins with NaTDC and lipolysis products.

Insights on applications of bentonite clays for the removal of dyes and heavy metals from wastewater: a review

In recent decades, increased industrial, agricultural, and domestic activities have resulted in the release of various pollutants into the aquatic systems, which require a reliable and environmentally friendly method to remove them. Adsorption is one of the most cost-effective and sustainable wastewater treatment techniques. A plethora of low-cost bio-based adsorbents have been developed worldwide so far to supplant activated carbon and its high processing costs. Bentonite clays (BCs), whether in natural or modified form, have gained enormous potential in wastewater treatment and have been used successfully as a novel and cost-effective bio-sorbent for removing organic and inorganic pollutants from the liquid suspension. It has become a sustainable solution for wastewater treatment due to its variety of surface and structural properties, superior chemical stability, high capacity for cation exchange, elevated surface area due to its layered structure, non-toxicity, abundance, low cost, and high adsorption capacity compared to other clays. This review encompasses comprehensive literature about various modification techniques and adsorption mechanisms of BCs concerning dyes and heavy metal removal from wastewater. A critical overview of different parameters for optimizing adsorption capacity and regeneration via the desorption technique has also been presented here. Finally, a conclusion has been drawn with some future research recommendations based on technological challenges encountered in industrializing these materials.

Preparation and Characterization of Electrospun Polysaccharide FucoPol-Based Nanofiber Systems

The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol’s low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications.

Preparation of Ricinoleic Acid from Castor Oil:A Review

Castor oil is a vegetable product extracted from Ricinus communis L (castor seed), which is primarily considered an important commercial value for the manufacturing of soaps, lubricants, coatings, etc. It is rich in hydroxylated fatty acids (ricinoleic acid, 89-92%) and is widely used in the cosmetic, pharmaceutical, oleochemical, and agricultural industries. This oil has also been confirmed as a bactericidal, anti-inflammatory, and antiherpetic agents, due to the ricinoleic acid having functional groups, such as -COOH, -OH, and -C=C-. Furthermore, it is converted into various acid derivative compounds with several applications. Therefore, this article reviewed some reaction stages to the preparation of ricinoleic acid from castor oil. Several methods or reaction pathways were employed in the preparation procedure, such as the Twitchell and Colgate-Emery processes, as well as the alkaline catalyzed, transesterification with methyl ricinoleic, and lipase-catalyzed hydrolysis, respectively. Although each of these preparation methods has advantages and disadvantages, the most effective technique was the hydrolysis through the use of the enzyme lipozyme TL IM. Besides being a green method, the conversion rate in the hydrolysis process was 96.2 ± 1.5.

Oxidative Stability of Vegetal Oil-Based Lubricants

Lipids are widely distributed in nature and are one of the most important components of natural foods, synthetic compounds, and emulsions. To date, there is a strong social demand in the industrial sector for the use of sustainable products with a minimal environmental impact. Depending on their origin and composition, lipids can be employed as a plausible alternative as biodegradable lubricants in order to reduce the use of conventional mineral oil lubricants and mitigate their environmental impact. This perspective provides an overview of the advantages and constrains of vegetal oils under different lubrication regimes and the tribochemical reactions that can take place. Also, the different factors and pathways that influence their oxidation, the key role of moisture, and the changes of physical properties under pressure and temperature are reviewed. Special emphasis is devoted to the oxidation instability of fatty acids and vegetal oils and the physical and chemical approaches to improve oxidative and thermal stability are described in detail.

Entrapping Immobilisation of Lipase on Biocomposite Hydrogels toward for Biodiesel Production from Waste Frying Acid Oil

A new application of biocomposite hydrogels named gelatin-alginate (GA) and pectin alginate (PA) enables the use of the hydrogels as carriers for lipase entrapment during biodiesel production. Waste frying acid oil (WFAO), a raw material, was converted to biodiesel via an esterification reaction catalysed by two different immobilised biocatalysts: gelatin-alginate lipase (GAL) and pectin-alginate lipase (PAL). The highest immobilisation yield of GAL and PAL beads was achieved at 97.61% and 98.30%, respectively. Both of them gave biodiesel yields in the range of 75–78.33%. Furthermore, capability and reusability of biocatalysts were improved such that they could be reused up to 7 cycles. Moreover, the predicted biodiesel properties met the European biodiesel standard (EN14214). Interestingly, entrapped lipase on composite hydrogels can be used as an alternative catalyst choice for replacing the chemical catalyst during the biodiesel production.

Development of an on-line Raman spectral analytical method for monitoring and endpoint determination of the Cornu Caprae Hircus hydrolysis process

OBJECTIVES

Cornu Caprae Hircus (goat horn, GH), a medicinal animal horn, is frequently used in traditional Chinese medicine, and hydrolysis is one of the most important processes for GH pretreatment in pharmaceutical manufacturing. In this study, on-line Raman spectroscopy was applied to monitor the GH hydrolysis process by the development of partial least squares (PLS) calibration models for different groups of amino acids.

METHODS

Three steps were considered in model development. In the first step, design of experiments (DOE)-based preprocessing method selection was conducted. In the second step, the optimal spectral co-addition number was determined. In the third step, sample selection or reconstruction methods based on hierarchical clustering analysis (HCA) were used to extract or reconstruct representative calibration sets from the pool of hydrolysis process samples and investigated for their ability to improve model performance.

KEY FINDINGS

This study has shown the feasibility of using on-line Raman spectral analysis for monitoring the GH hydrolysis process based on the designed measurement system and appropriate model development steps.

CONCLUSIONS

The proposed Raman-based calibration models are expected to be used in GH hydrolysis process monitoring, leading to more rapid material information acquisition, deeper process understanding, more accurate endpoint determination and thus better product quality consistency.

Characterization of non-covalent immobilized Candida antartica lipase b over PS-b-P4VP as a model bio-reactive porous interface

The design of interfaces that selectively react with molecules to transform them into compounds of industrial interest is an emerging area of research. An example of such reactions is the hydrolytic conversion of ester-based molecules to lipids and alcohols, which is of interest to the food, and pharmaceutical industries. In this study, a functional bio-interfaced layer was designed to hydrolyze 4-nitrophenyl acetate (pNPA) and Ricinus Communis (castor) oil rich in triglycerides using lipase b from Candida antarctica (CALB, EC 3.1.1.3). The attachment of CALB was performed via non-covalent immobilization over a polymer film of vertically aligned cylinders that resulted from the self-assembly of the di-block copolymer polystyrene-block-poly(4-vinyl pyridine) (PS-b-P4VP). This polymer-lipase model will serve as the groundwork for the design of further bioactive layers for separation applications requiring similar hydrolytic processes. Results from the fabricated functional bio-interfaced material include cylinders with featured pore size of 19 nm, d spacing of 34 nm, and ca. 40 nm of thickness. The polymer-enzyme layers were physically characterized using AFM, XPS, and FTIR. The immobilized enzyme was able to retain 91% of the initial enzymatic activity when using 4-nitrophenyl acetate (pNPA) and 78% when exposed to triglycerides from castor oil.

Enhanced Ricinoleic Acid Preparation Using Lipozyme TLIM as a Novel Biocatalyst: Optimized by Response Surface Methodology

Ricinoleic acid (RA) is an important raw material for plasticizers, emulsifiers, and nanomaterials. In this work, a green and efficient method was developed for RA production. Results showed that Lipozyme TLIM can be used as a novel biocatalyst to catalyze the hydrolysis of castor oil (CO) for RA preparation. Response surface methodology (RSM) was used to evaluate and optimize the effects of reaction variables on the hydrolysis of CO. Reaction conditions were optimized as follows: 41.3 °C, enzyme load 8.9%, 39.2 h, and 40:1 molar ratio of water to oil. Under these optimized reaction variables, the maximum hydrolysis ratio of CO (96.2 ± 1.5%) was obtained. The effect of hydrolysis variables on the reaction was as follows: enzyme load > hydrolysis time > temperature. In conclusion, this is a green, simple, and efficient method for RA preparation and can provide a good alternative method for RA industrial production.

One-pot conjugated linoleic acid production from castor oil by Rhizopus oryzae lipase and resting cells of Lactobacillus plantarum

Conjugated linoleic acid (CLA) has attracted as novel type of fatty acids having unusual health-promoting properties such as anticarcinogenic and antiobesitic effects. The present work employed castor oil as substrate for one-pot production of CLA using washed cells of Lactobacillus plantarum (L. plantarum) and lipases as catalysts. Among the screened lipases, the lipase Rhizopus oryzae (ROL) greatly assisted resting cells to produce CLA. Mass spectral analysis of the product showed that two major isomers of CLA were produced in the reaction mixture i.e. cis-9, trans-11 56.55% and trans-10, cis-12 43.45%. Optimum factors for CLA synthesis were found as substrate concentration (8 mg/mL), pH (6.5), washed cell concentration (12% w/v), and incubation time of 20 h. Hence, the combination of ROL with L. plantarum offers one pot production of CLA selectively using castor oil as a cost-effective substrate.

Function of PD-L1 in antitumor immunity of glioma cells

Human glioma is a highly fatal tumor with a significant feature of immune suppression. The functions of PD-L1 refer to co-simulation and immune regulation. To investigate expression and functional activity of PD-L1 in human glioma cell in vivo and in vitro. Expressions of PD-L1mRNA and protein in the human glioma cell line were analyzed with quantitative RT-PCR and flow cytometer; and then expression of PD-L1 in tissue specimens of 10 glioma patients was treated with immunohistochemical analysis; glioma cell and allogeneic CD4+ and CD8+ T cells were co-cultured, and cytokine IFN-γ, IL-2 and IL-10 in cultured supernatant fluid were determined with ELISA; upon blocking the interaction between glioma cell and the immune cell with PD-L1 monoclonal antibody (5H1), surface markers on immune cells were analyzed using flow cytometer. All human glioma cell lines constitutively expressed PD-L1, and IFN-γ induced glioma cell to highly express PD-L1. It was shown through immunohistochemical analysis that glioma specimen expressed PD-L1, while expression of PD-L1 was not observed in normal tissue and normal human brain near the tumor location. The release of IFN-γ and IL-2 was inhibited, while IL-10 was increased slightly. Glioma cell may escape from immune recognition and injury with the help of PD-L1, which is a significant pathogenic mechanism of glioma.

Effect of Environmental and Nutritional Parameters on the Extracellular Lipase Production by <i>Aspergillus niger</i>

Abstract- The present investigation was carried out to evaluate the effect of different growth conditions on lipase production by Aspegillus niger. The extracellular lipase producing fungus was isolated from spent bleaching earths. Optimization of physical and chemical parameters was done for maximum lipase production using this isolate. Growth of the organism and lipase production were measured usig varying pH (4 – 9), incubation temperature (20 – 30 °C), incubation time (8 – 80 hrs.), carbon sources, nitrogen sources, and shaking speed. Enhanced lipase production was observed at 24 °C, pH 7 and after 72hrs of incubation. Olive oil 5 % was observed as the most effective carbon source and Yeast extract 1.0 % as the most effective nitrogen source for lipase production. The optimum shaking value to get maximum lipase activity by Aspergillusniger was 200 rpm.

Effect of Environmental and Nutritional Parameters on the Extracellular Lipase Production by Aspergillus niger

Abstract- The present investigation was carried out to evaluate the effect of different growth conditions on lipase production byAspegillus niger. The extracellular lipase producing fungus was isolated from spent bleaching earths. Optimization of physical and chemical parameters was done for maximum lipase production using this isolate. Growth of the organism and lipase production were measured usig varying pH (4 – 9), incubation temperature (20 – 30 °C), incubation time (8 – 80 hrs.), carbon sources, nitrogen sources, and shaking speed. Enhanced lipase production was observed at 24 °C, pH 7 and after 72hrs of incubation. Olive oil 5 % was observed as the most effective carbon source and Yeast extract 1.0 % as the most effective nitrogen source for lipase production. The optimum shaking value to get maximum lipase activity byAspergillusnigerwas 200 rpm.

Molecular characteristics of Illicium verum extractives to activate acquired immune response

Illicium verum, whose extractives can activate the demic acquired immune response, is an expensive medicinal plant. However, the rich extractives in I. verum biomass were seriously wasted for the inefficient extraction and separation processes. In order to further utilize the biomedical resources for the good acquired immune response, the four extractives were obtained by SJYB extraction, and then the immunology moleculars of SJYB extractives were identified and analyzed by GC-MS. The result showed that the first-stage extractives contained 108 components including anethole (40.27%), 4-methoxy-benzaldehyde (4.25%), etc.; the second-stage extractives had 5 components including anethole (84.82%), 2-hydroxy-2-(4-methoxy-phenyl)-n-methyl-acetamide (7.11%), etc.; the third-stage extractives contained one component namely anethole (100%); and the fourth-stage extractives contained 5 components including cyclohexyl-benzene (64.64%), 1-(1-methylethenyl)-3-(1-methylethyl)-benzene (17.17%), etc. The SJYB extractives of I. verum biomass had a main retention time between 10 and 20 min what's more, the SJYB extractives contained many biomedical moleculars, such as anethole, eucalyptol, [1S-(1α,4aα,10aβ)]-1,2,3,4,4a,9,10,10a-octahydro-1,4a-dimethyl-7-(1-methylethyl)-1-phenanthrenecarboxylic acid, stigmast-4-en-3-one, γ-sitosterol, and so on. So the functional analytical results suggested that the SJYB extractives of I. verum had a function in activating the acquired immune response and a huge potential in biomedicine.

Determination of free amino acids in burley tobacco by high performance liquid chromatography

A reversed-phase high performance liquid chromatographic method was developed for determining free amino acids in burley tobacco. The test was done by OPA/3-mercaptopropionic acid as the pre-column derivatizing reagent. Chromatographic column was Elitte C(18) column (4.6 mm × 250 mm i.d., 5 μm). Mobile phase A was 18 mol/l NaAc (pH7.2) including 0.002%(v/v) triethylamine and 0.3%(v/v) furanidine. Mobile phase B was 100 mol/l NaAc (pH7.2)-acetonitrile-methanol (v/v = 1:2:2). The column temperature was 40 °C and the flow rate was 1.0 ml/min. The fluorescence detector was used with 350 nm excitation wave length and 450 nm emission wave length. The average recoveries of the method ranged from 95.3-100.7% with the relative standard deviation of 2.32-9.24%. The method is simple, accurate and has good repeatability. The results of the determination of seventeen kinds of free amino acids in burley leaves were produced by the way of different ratios of cake fertilizer and inorganic fertilizer. The results show that Aspartic acid has the highest content however ratio of cake fertilizer and inorganic fertilizer. The contents of most of the free amino acids are increased and then gradually decreased with the increase in organic manure. The contents of most of the free amino acids are very close at 15:85% ratio and 30:70% ratio of cake fertilizer and inorganic fertilizer. The total amount of free amino acids is the highest at 30:70% ratio of cake fertilizer and inorganic fertilizer. Considering comprehensively, the quality of burley leaves is the best at 30:70% ratio of cake fertilizer and inorganic fertilizer.

Review on antibacterial biocomposites of structural laminated veneer lumber

In this review, the characteristics and applications of structural laminated veneer lumber made from planted forest wood is introduced, and its preparation is explained, including various tree species and slab qualities, treatments for multiple effects and reinforced composites. The relevant factors in the bonding technology and pressing processes as well as the mechanical properties, research direction and application prospects of structural laminated veneer lumber made from planted forest wood are discussed.

Measurement of filter paper activities of cellulase with microplate-based assay

It is always a challenge to determine the total cellulase activity efficiently without reducing accuracy. The most common total cellulase activity assay is the filter paper assay (FPA) established by the International Union of Pure and Applied Chemistry (IUPAC). A new procedure to measure the FPA with microplate-based assay was studied in this work, which followed the main idea of IUPAC to dilute cellulase preparation to get fixed glucose release. FPAs of six cellulase preparations were determined with the microplate-based assay. It is shown that FPAs of cellulase Youtell, RCconc, R-10, Lerkam, Yishui and Sinopharm were 67.9, 46.0, 46.1, 27.4, 7.6 and 8.0 IU/ml respectively. There was no significant difference at the 95% confidence level between the FPA determined with IUPAC and the microplate-based assay. It could be concluded that the FPA could be determined by the microplate-based assay with the same accuracy and much more efficiency compared with that by IUPAC.

The optimization of Marasmius androsaceus submerged fermentation conditions in five-liter fermentor

Using desirability function, four indexes including mycelium dry weight, intracellular polysaccharide, adenosine and mannitol yield were uniformed into one expected value (Da) which further served as the assessment criteria. In our present study, Plackett-Burman design was applied to evaluate the effects of eight variables including initial pH, rotating speed, culture temperature, inoculum size, ventilation volume, culture time, inoculum age and loading volume on Da value during Marasmius androsaceus submerged fermentation via a five-liter fermentor. Culture time, initial pH and rotating speed were found to influence Da value significantly and were further optimized by Box-Behnken design. Results obtained from Box-Behnken design were analyzed by both response surface regression (Design-Expert.V8.0.6.1 software) and artificial neural network combining the genetic algorithm method (Matlab2012a software). After comparison, the optimum M. androsaceus submerged fermentation conditions via a five-liter fermentor were obtained as follows: initial pH of 6.14, rotating speed of 289.3 rpm, culture time of 6.285 days, culture temperature of 26 °C, inoculum size of 5%, ventilation volume of 200 L/h, inoculum age of 4 days, and loading volume of 3.5 L/5 L. The predicted Da value of the optimum model was 0.4884 and the average experimental Da value was 0.4760. The model possesses well fitness and predictive ability.

Mechanical characteristics of antibacterial epoxy resin adhesive wood biocomposites against skin disease

Moldy wood can cause some skin disease. However epoxy resin adhesive (EP) can inhibit mold growth. Therefore, antibacterial EP/wood biocomposites were reinforced and analyzed by the nonlinear finite element. Results show that glass fiber cloth and aluminum foil have the obvious reinforced effect under flat pressure, but this was not the case under side pressure. And when the assemble pattern was presented in 5A way, the strengthening effect was better. The nonlinear finite element showed that the aluminum foil and glass fiber cloth have the obvious reinforced effect. The mutual influence and effect of span, thickness and length on the ultimate bearing capacity of specimen were studied. And the simulation results agreed with the test. It provided a theoretical basis on the preparation of antibacterial EP/wood biocomposites against skin disease.

Improvement of oral availability of ginseng fruit saponins by a proliposome delivery system containing sodium deoxycholate

Ginseng fruit saponins (GFS) extracted from the ginseng fruit are the bioactive triterpenoid saponin components. The aim of the present study was to develop a drug delivery system called proliposome using sodium deoxycholate (NaDC) as a bile salt to improve the oral bioavailability of GFS in rats. The liposomes of GFS were prepared by a conventional ethanol injection and formed the solid proliposomes (P-GFS) using spray drying method on mannitol carriers. The formulation of P-GFS was optimized using the response surface methodology. The physicochemical properties of liposome suspensions including encapsulation efficiency, in vitro drug release studies, particle size of the reconstituted liposome were tested. The solid state characterization studies using the method of Field emission-scanning electron microscope (FE-SEM), Fourier transform infrared (FT-IR) and Differential scanning colorimetric (DSC) were tested to study the molecular state of P-GFS and to indicate the interactions among the formulation ingredients. In vitro studies showed a delayed release of ginsenoside Re (GRe). In vivo studies were carried out in rats. The concentrations of GRe in plasma of rats and its pharmacokinetic behaviors after oral administration of GFS, Zhenyuan tablets (commercial dosage form of GFS) and P-GFS were studied using ultra performance liquid chromatography tandem mass spectrometry. It was founded that the GRe concentration time curves of GFS, Zhenyuan tablets and P-GFS were much more different in rats. Pharmacokinetic behaviors of P-GFS showed a second absorption peak on the concentration time curve. The pharmacokinetic parameters of GFS, Zhenyuan tablets, P-GFS in rats were separately listed as follows: T max 0.25 h, C max 474.96 ± 66.06 ng/ml and AUC0-∞ 733.32 ± 113.82 ng/ml h for GFS; T max 0.31 ± 0.043 h, C max 533.94 ± 106.54 ng/ml and AUC0-∞ 1151.38 ± 198.29 ng/ml h for Zhenyuan tablets; T max 0.5 h, C max 680.62 ± 138.051 ng/ml and AUC0-∞ 2082.49 ± 408.33 ng/ml h for the P-GFS. The bioavailability of P-GFS was nearly 284% and 181% of the GFS and Zhengyuan tablets respectively. In conclusion, the proliposomes significantly enhanced the drug bioavailability, absorption in the gastrointestinal tract and decreased its elimination time of GRe in rats and could be selectively applied for oral delivery of GFS.

Near infrared spectroscopy coupled with radial basis function neural network for at-line monitoring of Lactococcus lactis subsp. fermentation

In our previous work, partial least squares (PLSs) were employed to develop the near infrared spectroscopy (NIRs) models for at-line (fast off-line) monitoring key parameters of Lactococcus lactis subsp. fermentation. In this study, radial basis function neural network (RBFNN) as a non-linear modeling method was investigated to develop NIRs models instead of PLS. A method named moving window radial basis function neural network (MWRBFNN) was applied to select the characteristic wavelength variables by using the degree approximation (Da) as criterion. Next, the RBFNN models with selected wavelength variables were optimized by selecting a suitable constant spread. Finally, the effective spectra pretreatment methods were selected by comparing the robustness of the optimum RBFNN models developed with pretreated spectra. The results demonstrated that the robustness of the optimal RBFNN models were better than the PLS models for at-line monitoring of glucose and pH of L. lactis subsp. fermentation.

Comparative pharmacokinetics of a proliposome formulation of Ginkgo biloba extract and Ginaton in rats by a sensitive ultra performance liquid chromatography-tandem mass spectrometry method

As a novel oral drug delivery system, proliposome was applied to improve the solubility of active components of Ginkgo biloba extract (GbE). There are currently few reports focusing on the pharmacokinetic characteristics of proliposome of GbE (GbP). A rapid and sensitive ultra performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method for the simultaneous quantification of active components of GbP and a commercial tablet product (Ginaton) in rat plasma was developed and successfully validated. The method was applied to the comparative pharmacokinetic evaluation of GbP and Ginaton in rat plasma. The results indicated that GbP has a significant effect on absorption, elimination and bioavailability of flavonoids and terpenoid lactones in comparison with Ginaton. The obtained results would be helpful for evaluating the absorption mechanism in the gastrointestinal tract in pharmacokinetic level and guiding the development of the novel oral drug delivery system.

Hybrid mesoporous silicates: A distinct aspect to synthesis and application for decontamination of phenols

Water pollution due to organic compounds is of great concern and efforts are being made to develop efficient adsorbents for remediation of toxic pollutants. The development of new functionalized materials with increased performance is growing to meet the regulatory standards in response to public concerns for environment. In this study, an attempt has been made to investigate the influence of synthesis parameters like the reaction temperature, the surfactant-to-silica ratio and reaction time on the structural and textural properties of novel ordered mesoporous silica hybrids. In order to understand the effect of different synthesis parameters, all the prepared materials were systematically characterized by various analytical, spectroscopic and imaging techniques such as XRD, BET, TG etc. It was deduced from these studies that the synthesis temperature influence greatly the structural order whereas both the P104/Na₂SiO₃ molar ratio and reaction time found to influence textural properties significantly. However, under optimized experimental condition, we could achieve the functionalized silica hybrids that offers successful incorporation of -Amino, -Glucidoxy, -Methacrylate, -Vinyl and -Phenyl moieties indicated by FTIR peaks at 793 cm⁻¹, 2870 cm⁻¹, 796 cm⁻¹, 1630 cm⁻¹ and 954 cm⁻¹. XRD studies reveal orthorhombic and tetragonal symmetry for the hybrids and these materials were found to be thermally stable due to incorporation of organic moiety in silica matrix. Functionalized silica hybrids then applied as adsorbents demonstrated efficient and comparable removal of 4-aminophenol and p-nitrophenol in 20 min facilitated through organic moiety. Detailed modeling of the sorption using equilibrium and kinetic isotherms has been carried out to get an insight into the transport process. The adsorption isotherms of phenol derivatives are well-fitted with the Langmuir, Freundlich and Temkin Isotherms and the adsorption kinetics follows the pseudo second order model. The modeling confirms that the uptake is a chemisorption process.

The effect and action mechanism of resveratrol on the vascular endothelial cell by high glucose treatment

To investigate the effect and action mechanism of resveratrol on the vascular endothelial cell by high glucose treatment. Primarily cultured human umbilical vein endothelial cells (HUVECs) were pretreated by resveratrol (0.2 μmol/L) and holding for 6 h, and then cultured in Dulbecco Modified Eagle Medium (DMEM) within 0.45 mmol/L of palmimte acid and 32.8 mmol/L of glucose, which is holding for 12 h. The cells were collected to analyze the expression of E-selected element. Supernatant of cultured cells, induced by 100 nmol/L insulin for 30 min, was used to analyze the nitric oxide content. Compared with normal control cells, the secretion of nitric oxide is stimulated by insulin decrease, however, the expression of E-selected element increased in HUVEC. Resveratrol treatment increased the secretion of nitric oxide stimulated by insulin and decreased the expression of E-selected element and partly counteracts the impairment of high glucose and palmitate acid on the function of endothelial cells. Resveratrol can improve and protect the function of high glucose and fatty acid cultured endothelial cell, and therefore may be a promising medicine in the prevention or therapy of diabetic macrovascular diseases.

One-step synthesis of interpenetrating network hydrogels: Environment sensitivities and drug delivery properties

A novel interpenetrating network hydrogel for drug controlled release, composed of modified poly(aspartic acid) (KPAsp) and carboxymethyl chitosan (CMCTS), was prepared in aqueous system. The surface morphology and composition of hydrogels were characterized by SEM and FTIR. The swelling properties of KPAsp, KPAsp/CMCTS semi-IPN and KPAsp/CMCTS IPN hydrogels were investigated and the swelling dynamics of the hydrogels was analyzed based on the Fickian equation. The pH, temperature and salt sensitivities of hydrogels were further studied, and the prepared hydrogels showed extremely sensitive properties to pH, temperature, the ionic salts kinds and concentration. The results of controlled drug release behaviors of the hydrogels revealed that the introduction of IPN observably improved the drug release properties of hydrogels, the release rate of drug from hydrogels can be controlled by the structure of the hydrogels and pH value of the external environment, a relative large amount of drug released was preferred under simulated intestinal fluid. These results illustrated high potential of the KPAsp/CMCTS IPN hydrogels for application as drug carriers.

Effect of azo dye on ammonium oxidation process and ammonia-oxidizing bacteria (AOB) in soil

Ammonia-oxidizing bacteria (AOB) play a key role in the production of nitrate-N (NO₃⁻-N) in terrestrial ecosystems.