Rapid and economical synthesis of magnetic multiwalled carbon nanotube/iron oxide composite and its application in preconcentration of U(VI)

Adsorption property of Br-PADAP-impregnated multiwall carbon nanotubes towards uranium and its performance in the selective separation and determination of uranium in different environmental samples

A newer efficient U(VI) ion adsorbent was synthesized by impregnating Br-PADAP [2-(5-Bromo-2-pyridylazo)-5-(diethylamino)phenol] onto multiwall carbon nanotubes (MWCNTs). The effects of various operation conditions on uranium adsorption (i.e., pH contact time, temperature, and initial uranium concentration) were systematically evaluated using batch experiments. The results indicated that the uranium adsorption on modified MWNCTs (5.571 × 10^-3g/mg × min) reached faster equilibrium than that on pristine MWNCTs (4.832 × 10^-3g/mg × min), reflecting the involvement of appropriate functional groups of Br-PADAP on the chelating ion-exchange mechanism of U(VI) adsorption. Modified MWNCTs (83.4mg/g) exhibited significantly higher maximum Langmuir adsorption capacity than pristine MWNCTs (15.1mg/g). Approximately 99% of uranium adsorbed onto modified MWNCTs can be desorbed by 2.5mL of 1M HNO₃ solution. Therefore, Br-PADAP-modified MWNCTs can server as a promising adsorbent for efficient uranium adsorption applications in water treatment. Subsequently, the proposed solid-phase extraction (using a mini-column packed with Br-PADAP/MWCNT) was successfully utilized for analysing trace uranium levels by the ICP-AES method in different environmental samples with a pre-concentration factor of 300-fold. The coexistence of other ions demonstrated an insignificant interference on the separative pre-concentration of uranium. the detection limit was recognized as 0.14μg/L, and the relative standard deviation was approximately 3.3% (n = 7).

Carbon nano tubes functionalized with novel functional group- amido-amine for sorption of actinides

The manuscript presents the results on the sorption of U(VI), Am(III) & Eu(III) from pH medium by a novel amido-amine functionalized multiwalled carbon nanotube (MWCNT). The novel functional group was introduced in the MWCNT by two step processes and characterized by various instrumental techniques like Scanning Electron Microscopy (SEM), Raman and X-ray Photoelectron Spectroscopy (XPS). The sorption process was found to be highly dependent on the pH of the solution with maximum sorption for both 233U, 241Am & 152+154Eu at pH 7.0. Kinetics of sorption was found to be fast with equilibrium reached in ∼15min and the sorption was found to be following pseudo 2nd order kinetics for the radionuclides. The sorption for both 233U and 152+154Eu followed Langmuir sorption model with maximum sorption capacity of 20.66mg/g and 16.1mg/g respectively. This has been explained by DFT calculations which shows that more negative solvation energy of U(VI) compared to Am(III) and Eu(III) and stronger U-MWCNT-AA complex is responsible for higher sorption capacity of U(VI) compared to Am(III) and Eu(III).The synthesized amido-amine functionalized MWCNT is a very promising candidate for removal of actinides and lanthanides from waste water solution with high efficiency.

Magnetic Nanoparticles: From Design and Synthesis to Real World Applications

The increasing number of scientific publications focusing on magnetic materials indicates growing interest in the broader scientific community. Substantial progress was made in the synthesis of magnetic materials of desired size, morphology, chemical composition, and surface chemistry. Physical and chemical stability of magnetic materials is acquired by the coating. Moreover, surface layers of polymers, silica, biomolecules, etc. can be designed to obtain affinity to target molecules. The combination of the ability to respond to the external magnetic field and the rich possibilities of coatings makes magnetic materials universal tool for magnetic separations of small molecules, biomolecules and cells. In the biomedical field, magnetic particles and magnetic composites are utilized as the drug carriers, as contrast agents for magnetic resonance imaging (MRI), and in magnetic hyperthermia. However, the multifunctional magnetic particles enabling the diagnosis and therapy at the same time are emerging. The presented review article summarizes the findings regarding the design and synthesis of magnetic materials focused on biomedical applications. We highlight the utilization of magnetic materials in separation/preconcentration of various molecules and cells, and their use in diagnosis and therapy.

Removal of Uranium From Aqueous Solution by Carbon Nanotubes

The adsorption of uranium onto carbon nanotubes (CNTs) was investigated. The effect of solution pH, contact time, initial uranium concentration, and temperature on the adsorption capacity of uranium was determined. CNTs were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder x-ray diffraction (XRD), Raman spectra, and the Fourier infrared spectra (FTIR). The diameters of the CNTs varied from 10 to 50 nm in diameter and 1 ~ 2 μm in length. FTIR spectra analysis indicated that carboxyl groups were involved in adsorption of U(VI) by CNTs. The experimental results showed that U(VI) adsorption onto CNTs reached equilibrium within 10 min, and the removal efficiency was 95% at pH = 5. The adsorption kinetics of U(VI) could be described by a pseudo first-order kinetic model. The adsorption isotherm conformed to the Slips model. The adsorption process was spontaneous and endothermic.