Adsorption of Cu (II) ions from water by carbon nanotubes oxidized with UV-light and ultrasonication

Effective isolation of succinic acid from aqueous media with the use of anion exchange resins

The primary objective of this study was to examine the isolation of succinic acid (SA) from aqueous-based solutions through the utilization of adsorption and ion exchange methods. Four kinds of anion exchange resins were employed, two of which were strong basic (Lewatit M-500 and Lewatit M-600), and the other two were weak basic (Lewatit MP-64 and Lewatit MP-62). The impacts of various variables on the efficiency of the process were examined. The aqueous pH strongly influenced the separation yield. Weak basic exchangers achieved the maximum yield at pH 2.1. However, the highest performance with Lewatit M-600 and Lewatit M-500 was obtained at pH 5 and 6, respectively. The SA separation with the tested resins reached equilibrium in about an hour. The recovery data revealed consistency with the Langmuir isotherm and pseudo-second-order kinetics. Efficiency improved with resin dosage and reduced with SA concentration. It was found that weak basic anion exchange resins were more efficient than strong basic exchangers for the recovery process. Among the resins tested, Lewatit MP-62 demonstrated the highest sorption capacity of 321 mg g-1 and 97.5% yield. The performance of the system decreased with temperature for all alternatives tested; however, its impact was not notable. The isolation process had an exergonic, exothermic, and favorable character based on the thermodynamic constants. Acid-loaded resins were successfully regenerated using trimethylamine and HCl for weak and strong anion exchange resins, respectively.

Enhancing Cu2+ Ion Removal: An Innovative Approach Utilizing Modified Frankincense Gum Combined with Multiwalled Carbon Tubes and Iron Oxide Nanoparticles as Adsorbent

Aquatic pollution, which includes organic debris and heavy metals, is a severe issue for living things. Copper pollution is hazardous to people, and there is a need to develop effective methods for eliminating it from the environment. To address this issue, a novel adsorbent composed of frankincense-modified multi-walled carbon nanotubes (Fr-MMWCNTs) and Fe3O4 [Fr-MWCNT-Fe3O4] was created and subjected to characterization. Batch adsorption tests showed that Fr-MWCNT-Fe3O4 had a maximum adsorption capacity of 250 mg/g at 308 K and could efficiently remove Cu2+ ions over a pH range of 6 to 8. The adsorption process followed the pseudo-second-order and Langmuir models, and its thermodynamics were identified as endothermic. Functional groups on the surface of modified MWCNTs improved their adsorption capacity, and a rise in temperature increased the adsorption efficiency. These results highlight the Fr-MWCNT-Fe3O4 composites' potential as an efficient adsorbent for removing Cu2+ ions from untreated natural water sources.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Vortex-assisted magnetic solid-phase extraction of cadmium in food, medicinal herb, and water samples using silica-coated thiol-functionalized magnetic multiwalled carbon nanotubes as adsorbent

The current work focuses on the facile and effective synthesis of a new nanocomposite based on multiwalled carbon nanotubes (MWCNT) decorated with magnetic core-shell Fe₃O₄@SiO₂ and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTS) used in the vortex-assisted dispersive magnetic solid-phase extraction (VA-DMSPE) of Cd(II) ions in environmental and food samples. The nanocomposite was characterized and the parameters that influenced the VA-DMSPE were optimized through a fractional factorial design 2^5-1. The proposed method provided a preconcentration factor of 33.14 times, detection and quantification limits of 0.090 μg L^-1 and 0.302 μg L^-1, respectively, and a linearity range of 0.001-40.0 μg L^-1. The developed method was effectively applied to preconcentrate and determine Cd(II) in water, tobacco, green tea leaves, ginkgo biloba, carrots, and rice samples, and its accuracy was evaluated using GF AAS.

Effects of Cd(II) on the stability of humic acid-coated nano-TiO2 particles in aquatic environments

The stability of nanoparticles (NPs) in aquatic environments is important to evaluate their adverse effects on aquatic ecosystems and human health. Nanoparticle stability is known to be influenced by coexisting ions and dissolved organic matter. This study was designed to investigate the effects of coexisting low-level Cd(II) on the stability of humic acid-coated nano-TiO₂ (HA-TiO₂) particles in aquatic environments by measuring their aggregation kinetics through time-resolved dynamic light scattering (DLS) and monitoring suspended HA-TiO₂ concentrations via optical absorbance changes over time. The particles exhibited aggregation behavior consistent with the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The results showed that Cd(II) concentration, pH, and ionic strength had various effects on the aggregation kinetics of the HA-TiO₂ NPs. The HA-TiO₂ particles aggregated faster as the Cd(II) concentration increased whereas the stability of the nanoparticles increased as the solution pH increased or ionic strength decreased regardless of the Cd(II) concentration. At the fixed pH and ionic strength conditions, the addition of Cd(II) promoted aggregation of nanoparticles, leading to higher attachment efficiencies. The enhanced aggregation of the HA-TiO₂ NPs in the presence of coexisting cadmium ions in aqueous solutions indicated that the fate and transport of nanoparticles could be greatly affected by heavy metals in aquatic environments.

Removal of copper ions from aqueous solutions via adsorption on carbon nanocomposites

The development of technologies for water purification is critical to meet the global challenges of insufficient water supply and inadequate sanitation. Among all wastewater treatments, adsorption is globally recognized as the most promising method because of its versatility and economic feasibility. Herein, the removal of copper ions (Cu(II)) from aqueous solutions through adsorption on free-standing hybrid papers comprised of a mixture between graphene and different types of carbon nanotubes (CNTs) was examined. Results indicate that the rate of adsorption and long-time capacity of the metal ions on the nanocomposites significantly exceeds that of activated carbon by a factor of 4. Moreover, the combination of graphene with CNTs endows an increase in the uptake of Cu(II) up to 50% compared to that of CNTs alone, with a maximum adsorption capacity higher than 250 mg·g(-1). The removal of Cu(II) from water is sensitive to solution pH, and the presence of oxygen functional groups on the adsorbent surface promotes higher adsorption rates and capacities than pristine materials. These hybrid nanostructures show great promise for environmental remediation efforts, wastewater treatments, and separation applications, and the results presented in this study have important implications for understanding the interactions of carbonaceous materials at environmental interfaces.

Unanticipated favoured adsorption affinity of Th(iv) ions towards bidentate carboxylate functionalized carbon nanotubes (CNT–COOH) over tridentate diglycolamic acid functionalized CNT: density functional theoretical investigation

CNT–COOH has higher adsorption affinity for Th⁴⁺ in aqueous solution compared to CNT–DGA, whereas pristine CNT has nil.