Enhanced adsorption of phenols from liquids by aluminum oxide/carbon nanotubes: Comprehensive study from synthesis to surface properties

Bioremediation of azo dye: A review on strategies, toxicity assessment, mechanisms, bottlenecks and prospects

The synthetic azo dyes are widely used in the textile industries for their excellent dyeing properties. They may be classified into many classes based on their structure and application, including direct, reactive, dispersive, acidic, basic, and others. The continuous discharge of wastewater from a large number of textile industries without prior treatment poses detrimental effects on the environment and human health. Azo dyes and their degradation products are extremely poisonous for their carcinogenic, teratogenic and mutagenic nature. Moreover, exposure to synthetic azo dyes can cause genetic changes, skin inflammation, hypersensitivity responses, and skin irritations in persons, which may ultimately result in other profound issues including the deterioration of water quality. This review discusses these dyes in details along with their detrimental effects on aquatic and terrestrial flora and fauna including human beings. Azo dyes degrade the water bodies by increasing biochemical and chemical oxygen demand. Therefore, dye-containing wastewater should be effectively treated using eco-friendly and cost-effective technologies to avoid negative impact on the environment. This article extensively reviews on physical, chemical and biological treatment with their benefits and challenges. Biological-based treatment with higher hydraulic retention time (HRT) is economical, consumes less energy, produces less sludge and environmentally friendly. Whereas the physical and chemical methods with less hydraulic retention time is costly, produces large sludge, requires high dissolved oxygen and ecologically inefficient. Since, biological treatment is more advantageous over physical and chemical methods, researchers are concentrating on bioremediation for eliminating harmful azo dye pollutants from nature. This article provides a thorough analysis of the state-of-the-art biological treatment technologies with their developments and effectiveness in the removal of azo dyes. The mechanism by which genes encoding azoreductase enzymes (azoG, and azoK) enable the natural degradation of azo dyes by bacteria and convert them into less harmful compounds is also extensively examined. Therefore, this review also focuses on the use of genetically modified microorganisms and nano-technological approaches for bioremediation of azo dyes.

Study on the Hydrophobic Modification Mechanism of Stearic Acid on the Surface of Coal Gasification Fly Ash

In this study, the hydrophobic modification of coal gasification fly ash (FA) was investigated given the adverse effects of surface hydrophilic structures on the material field. The surface of FA was modified using stearic acid (SA), which successfully altered its hydrophilic structure. When the contact angle of S-FA increased from 23.4° to 127.2°, the activation index increased from 0 to 0.98, the oil absorption decreased from 0.564 g/g to 0.510 g/g, and the BET-specific surface area decreased from 13.973 m2/g to 3.218 m2/g. The failure temperature of SA on the surface of S-FA was 210 °C. The adsorption mechanism of FA was analyzed using density functional theory (DFT) and molecular dynamics (MD). The adsorption of water molecules by FA involved both chemical and physical adsorption, with active adsorption sites for Al, Fe, and Si. The adsorbed water molecules on the surface of FA formed hydrogen bonds with a bond length of 1.5-2.5 Å, leading to agglomeration. In addition, the long alkyl chain in SA mainly relied on the central carbon atom in the (-CH3) structure to obtain electrons in different directions from the H atoms in space, increasing the Coulomb repulsion with the O atoms in the water molecule and thereby achieving the hydrophobic effect. In the temperature range of 298 K to 358 K, the combination of FA and SA became stronger as the temperature increased.

A statistical optimization for almost-complete methylene blue biosorption by Gracilaria bursa-pastoris

In this study, the dried biomass of four marine algae, namely Porphyra sp., Gracilaria bursa-pastoris, Undaria pinnatifida and Laminaria sp., were screened for their ability to remove methylene blue (MB) dye from aqueous solutions. Statistical approaches of the Plackett-Burman Design (PBD) and Box-Behnken Design (BBD) were applied to optimize different environmental conditions in order to achieve the maximum MB removal percentage by Gracilaria bursa-pastoris. The biosorbent was characterized before and after adsorption process using FTIR, XRD and SEM analysis. Additionally, isotherms, kinetics and thermodynamics studies were conducted to investigate the adsorption behavior of the adsorbent. The results showed that Gracilaria bursa-pastoris achieved the highest dye removal efficiency (98.5 %) compared to 96.5 %, 93.5 % and 93.9 % for Undaria pinnatifida, Porphyra sp. and Laminaria sp., respectively. PBD analysis revealed that the agitation speed, pH, and biomass dose were found to be the significant parameters affecting MB removal onto Gracilaria dried biomass. According to the BBD results, the maximum dye removal percentage (99.68 %) was obtained at agitation speed of 132 rpm, pH 7 and biomass dose of 7.5 g/L. FTIR, XRD and SEM analysis demonstrated the participation of several functional groups in the adsorption process and changes in the cell surface morphology of the adsorbent following the dye adsorption. The adsorption isotherms showed better fit to Freundlich model (R2 = 0.9891) than the Langmuir, Temkin, and Dubinin-Radushkevich models. The adsorption kinetics were best described by the pseudo-second-order model (R2 = 0.9999), suggesting the chemical interactions between dye ions and the algal biomass. The thermodynamic parameters indicated that the adsorption of MB onto Gracilaria dried biomass was spontaneous, feasible, endothermic and random. These results indicate that dried biomass of Gracilaria bursa-pastoris is an attractive, environmentally friendly, cheap and effective agent for MB dye removal from environmental discharges.

Utilization of nanosize spent oil shale for water treatment: application of top-down nanonization technology for solid residues

Since the dawn of nanoscience, producing nanomaterials in a simple, low-cost, and high-yield manner has been a major issue. For the commercial manufacturing of nanomaterials, various bottom-up and top-down methodologies have been established. High-energy dry ball milling is widely used for the production of diverse nanomaterials, nanograins, nanoalloys, and nanocomposites. Physical grinding of inorganic solid waste into nanosize (1-100 nm) has improved their industrial applications particularly as water adsorbent. Application of nanosize spent oil shale by top-down methodology as adsorbent for phenol is addressed in the current research. The collected spent oil shale (SiO₂ and Al₂O₃ making 45% of the material) has microstructure with average particle size of 56.6 μm. The dry grinding was performed in a vibrating ball mill at various grinding time (5-150 min) while keeping the grinding parameters constant including number of balls, ball size, total mass, vibration frequency, and amplitude. Upon grinding, the mean particle diameter of the bulk material was reduced to 191.8 and 85.2 nm using 0.5 and 0.1 mm grinding balls, respectively. The effect of grinding time on particle size and surface area was investigated; both particle size and surface area were not affected after 60 min of grinding. Physical grinding by 0.1 mm balls has notably improved surface area and total pore volume by 52% and 62%, respectively. Although nanosize particles (85.2 nm) perform better than bulk material for phenol uptake, they underwent serious aggregation at pH > 2 and ionic strength > 1.0 mM. Hence, the 191.8-nm size is selected to assess the effect of mechanical grinding on adsorption rate and equilibrium capacity for phenol as a common pollutant. Upon nanonization, adsorption rate of phenol was highly increased from 0.39 to 4.43 mg g^-1 min^-1 as analyzed by pseudo-second-order model. Adsorption isotherms were adequately presented by Sips model (prediction error 5.4-7.2%) with a maximum phenol retention capacity of 39.29 mg/g after nanonization compared to 10.71 mg/g for the raw material. The performance of the nanosize spent oil shale for phenol retention was promising when compared with advanced adsorbents like multiwalled carbon nanotube.

Investigation into Biosorption of Pharmaceuticals from Aqueous Solutions by Biocomposite Material Based on Microbial Biomass and Natural Polymer: Process Variables Optimization and Kinetic Studies

Biosorbtive removal of the antibacterial drug, ethacridine lactate (EL), from aqueous solutions was investigated using as biosorbent Saccharomyces pastorianus residual biomass immobilized in calcium alginate. The aim of this work was to optimize the biosorption process and to evaluate the biosorption capacity in the batch system. Response surface methodology, based on a Box–Behnken design, was used to optimize the EL biosorption parameters. Two response functions (removal efficiency and biosorption capacity) were maximized dependent on three factors: initial concentration of EL solution, contact time, and agitation speed. The highest values for the studied functions (89.49%, 26.04 mg/g) were obtained in the following operational conditions: EL initial concentration: 59.73 mg/L; contact time: 94.26 min; agitation speed: 297.57 rpm. A number of nonlinear kinetic models, including pseudo-first-order, pseudo-second-order, Elovich, and Avrami, were utilized to validate the biosorption kinetic behavior of EL in the optimized conditions. The kinetic data fitted the pseudo-first-order and Avrami models. The experimental results demonstrated that the optimized parameters (especially the agitation speed) significantly affect biosorption and should be considered important in such studies.

Do Carbon Nanotubes and Asbestos Fibers Exhibit Common Toxicity Mechanisms?

During the last two decades several nanoscale materials were engineered for industrial and medical applications. Among them carbon nanotubes (CNTs) are the most exploited nanomaterials with global production of around 1000 tons/year. Besides several commercial benefits of CNTs, the fiber-like structures and their bio-persistency in lung tissues raise serious concerns about the possible adverse human health effects resembling those of asbestos fibers. In this review, we present a comparative analysis between CNTs and asbestos fibers using the following four parameters: (1) fibrous needle-like shape, (2) bio-persistent nature, (3) high surface to volume ratio and (4) capacity to adsorb toxicants/pollutants on the surface. We also compare mechanisms underlying the toxicity caused by certain diameters and lengths of CNTs and asbestos fibers using downstream pathways associated with altered gene expression data from both asbestos and CNT exposure. Our results suggest that indeed certain types of CNTs are emulating asbestos fiber as far as associated toxicity is concerned.

Development and Characterization of Silver-Doped Multi-Walled Carbon Nanotube Membranes for Water Purification Applications

A unique approach was utilized to develop multi-walled carbon nanotube (MWCNT) silver (Ag) membranes. MWCNTs were impregnated with 1 wt% Ag loading, which resulted in a homogeneous dispersion of Ag in MWCNTs. MWCNTs impregnated with Ag were then uniaxially compacted at two different pressures of 80 MPa and 120 MPa to form a compact membrane. Compacted membranes were then sintered at two different temperatures of 800 °C and 900 °C to bind Ag particles with MWCNTs as Ag particles also act as a welding agent for CNTs. The powder mixture was characterized by FESEM, thermogravimetric analysis, and XRD, while the developed samples were characterized by calculating the porosity of membrane samples, contact angle, water flux and a diametral compression test. The developed membranes showed overall large water flux, while maximum porosity was found to decrease as the compaction load and sintering temperature increased. The mechanical strength of the membranes was found to increase as the compaction load increased. The hydrophilicity of the membranes remained unchanged after the addition of Ag particles. The developed membranes would be useful for removing a variety of contaminants from water.

Nano and micro architectured cues as smart materials to mitigate recalcitrant pharmaceutical pollutants from wastewater

Pharmaceuticals have been recognized for saving billions of lives, but they also appear as a novel group of environmental pollutants. The presence of pharmaceutically active residues in seawater, surface water, wastewater treatment plants, sludges, and soils has been widely reported. Their persistence in the environment for extended durations exerts various adverse consequences, such as gene toxicity, hormonal interference, antibiotic resistance, sex organs imposition, and many others. Various methodologies have been envisioned for their removal from the aqueous media. Different processes have been restricted due to high cost, inefficient removal, generation of toxic materials, and high capital requirement. The employment of nanostructured materials to mitigate pharmaceutical contaminants has been increasing during the last decades. The adsorptive nanomaterials have a high surface area, low cost, eco-friendliness, and high affinity for inorganic and organic molecules. In this review, we have documented the rising concerns of environmental pharmaceutical contamination and their remediation by applications of nanomaterials. Nanomaterials could be a robust candidate for the removal of an array of environmental contaminants in water.

Functionalized Carbon Nanotubes (CNTs) for Water and Wastewater Treatment: Preparation to Application

As the world human population and industrialization keep growing, the water availability issue has forced scientists, engineers, and legislators of water supply industries to better manage water resources. Pollutant removals from wastewaters are crucial to ensure qualities of available water resources (including natural water bodies or reclaimed waters). Diverse techniques have been developed to deal with water quality concerns. Carbon based nanomaterials, especially carbon nanotubes (CNTs) with their high specific surface area and associated adsorption sites, have drawn a special focus in environmental applications, especially water and wastewater treatment. This critical review summarizes recent developments and adsorption behaviors of CNTs used to remove organics or heavy metal ions from contaminated waters via adsorption and inactivation of biological species associated with CNTs. Foci include CNTs synthesis, purification, and surface modifications or functionalization, followed by their characterization methods and the effect of water chemistry on adsorption capacities and removal mechanisms. Functionalized CNTs have been proven to be promising nanomaterials for the decontamination of waters due to their high adsorption capacity. However, most of the functional CNT applications are limited to lab-scale experiments only. Feasibility of their large-scale/industrial applications with cost-effective ways of synthesis and assessments of their toxicity with better simulating adsorption mechanisms still need to be studied.

Use of Nanocellulose extracted from grass for adsorption abatement of Ciprofloxacin and Diclofenac removal with phyto, and fish toxicity studies

The present study deals with the adsorption of antibiotic Ciprofloxacin (CPXO) and anti-inflammatory agent Diclofenac (DCF) on Grass nanocellulose (GNC) extracted from Cyprus rotundas grass. The adsorbent GNC was characterised using various microscopic, elemental and spectroscopic analysis to monitor the physicochemical alterations of the surface before and after adsorption. The size of the converted nanocellulose was found to be 40-50 nm. The experimental measures influencing the adsorption of CPXO and DCF that were optimised are initial solution pH, GNC dosage, temperature and initial concentration of the adsorbate. Halsey isotherm model and pseudo-second order kinetic model agreed best with the experimental outcome for both the adsorbate. The maximum adsorption capacity of GNC were 227.223 and 192.307 mg/g for CPXO and DCF respectively. Phytotoxicity studies were performed using 6 different types of seeds to evaluate the effect of GNC treated effluent on plants. Similarly, acute fish toxicity on zebra fish analysis showed to have lesser mortality rate of the effluent after adsorption of CPXO and DCF on GNC.

Adsorption Characteristics of Synthesized Polyelectrolytes onto Alumina Nanoparticles and their Application in Antibiotic Removal

The present study aims to investigate the adsorption of synthesized poly(2-acrylamide-2-methylpropane sulfonic acid) (PAMPs) onto alumina nanoparticles and their application in the removal of ciprofloxacin (CFX) antibiotic from a water environment. The PAMPs were successfully synthesized and characterized by nuclear magnetic resonance and gel-permeation chromatography methods. The number- and weight-average molecular weights of PAMPs were 6.76 × 10⁵ and 7.28 × 10⁶ g/mol, respectively. The charge reversal of nanoalumina after PAMPs modification from positive to -37.5 mV was determined by ζ-potential measurement, while the appearance of C ═ O and N-H functional groups in PAMPs observed by Fourier-transform infrared spectroscopy confirmed them as the main indicators for adsorption of PAMPs onto a nanoalumina surface. The maximum adsorption capacity of PAMPs onto nanoalumina in 100 mg/L KCl was about 10 mg/g. The adsorption isotherms were fitted well by a two-step adsorption model. Application of PAMPs-modified nanoalumina (PAMNA) in CFX removal was also thoroughly studied. The optimum conditions for CFX removal using PAMNA were found to be pH 6, 10 mM NaCl, contact time 90 min, and adsorption dosage 5 mg/mL. The CFX adsorption isotherms and kinetics were in accordance with the two-step and pseudo-second-order models, respectively. The application for CFX removal in actual hospital wastewater was greater than 80%. The results of this study demonstrate that PAMNA is a new and promising material for antibiotic removal from wastewater.

An Overview and Evaluation of Highly Porous Adsorbent Materials for Polycyclic Aromatic Hydrocarbons and Phenols Removal from Wastewater

Polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds had been widely recognized as priority organic pollutants in wastewater with toxic effects on both plants and animals. Thus, the remediation of these pollutants has been an active area of research in the field of environmental science and engineering. This review highlighted the advantage of adsorption technology in the removal of PAHs and phenols in wastewater. The literature presented on the applications of various porous carbon materials such as biochar, activated carbon (AC), carbon nanotubes (CNTs), and graphene as potential adsorbents for these pollutants has been critically reviewed and analyzed. Under similar conditions, the use of porous polymers such as Chitosan and molecularly imprinted polymers (MIPs) have been well presented. The high adsorption capacities of advanced porous materials such as mesoporous silica and metal-organic frameworks have been considered and evaluated. The preference of these materials, higher adsorption efficiencies, mechanism of adsorptions, and possible challenges have been discussed. Recommendations have been proposed for commercialization, pilot, and industrial-scale applications of the studied adsorbents towards persistent organic pollutants (POPs) removal from wastewater.

Hybrid Materials Based on Carbon Nanotubes and Nanofibers for Environmental Applications

With the advances in material science, hybrid nanomaterials with unique mechanical, electrical, thermal and optical characteristics have been developed. Among them, hybrids based on filamentous forms of carbon, such as carbon nanotubes and carbon nanofibers, in combination with inorganic nanoparticles attract particular attention. Due to the structure and morphology, charge and energy transfer processes lead to synergistic effects that allow the use of less material with higher productivity. To clarify these issues, this review will summarize and discuss the relevant studies of the use of inorganic compounds of various chemical groups in modifying carbon nanomaterials for ecological applications.

Challenges and opportunities in functional carbon nanotubes for membrane-based water treatment and desalination

Environmental applications of carbon nanotubes (CNTs) have grabbed worldwide attentions due to their excellent adsorption capacities and promising physical, chemical and mechanical properties. The functionalization of CNTs, which involves chemical/physical modification of pristine CNTs with different types of functional groups, improves the capabilities of CNT for desalination and/or removals of waterborne contaminants. This paper intends to provide a comprehensive review of functional CNT materials (f-CNT) and their existing and potential applications in membrane-based water treatment and desalination processes, with focuses on critical evaluation of advances, knowledge gaps and future research directions. CNT nanocomposite membranes have been studied at bench scale to efficiently remove a variety of waterborne contaminants and salts, while future improvement is under way with development in CNT functionalization techniques. The CNT-based membrane applications are found to possess a variety of advantages, including improve water permeability, high selectivity and antifouling capability. However, their applications at full scale are still limited by their high cost. Finally, we highlight that f-CNT membranes with promising removal efficiencies for respective contaminants be considered for commercialization and to achieve holistic performance for the purpose of water treatment and desalination.

Fabrication of a magnetite/diazonium functionalized-reduced graphene oxide hybrid as an easily regenerated adsorbent for efficient removal of chlorophenols from aqueous solution

A magnetic hybrid nanomaterial, which contains magnetite (Fe₃O₄) particles and diazonium functionalized-reduced graphene oxide (DF-RGO), was fabricated via a three-pot reaction. First, the reduced graphene oxide (RGO) was synthesized via a redox reaction. Second, diazonium functionalized-RGO was prepared via a feasible chemical reaction. Third, Fe₃O₄ particles were loaded onto the surface of DF-RGO by covalent bonding, fabricating the M-DF-RGO hybrid. The fabricated hybrid was characterized by SEM, TEM, AFM, XRD, XPS, FT-IR, TGA, Raman spectroscopy, and magnetometry. The resulting M-DF-RGO hybrid possessed unique magnetic properties and was applied to remove 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) from aqueous solution. The adsorption of 4-CP and 2,4-DCP on the M-DF-RGO hybrid was performed under various conditions, with respect to initial chlorophenol concentration, pH, and contact time. The results suggest that the adsorption of 4-CP and 2,4-DCP onto the M-DF-RGO hybrid is strongly dependent on pH and weakly dependent on contact time. In addition, the adsorption isotherm of 4-CP and 2,4-DCP on the M-DF-RGO hybrid fits the Freundlich model well and the adsorption capacities of 4-CP and 2,4-DCP on M-DF-RGO reached 55.09 and 127.33 mg g⁻¹, respectively, at pH 6 and 25 °C. In this situation, intermolecular interactions including π–π interactions and hydrogen bonding are operative. The calculated results of density functional theory further demonstrate that 2,4-DCP molecules could be more easily absorbed than 4-CP molecules by the M-DF-RGO hybrid. Moreover, the M-DF-RGO hybrid could be easily separated by a magnetic separation process, and showed good recyclability of more than five cycles.

A magnetite/diazonium functionalized-reduced graphene oxide hybrid is an easily regenerated and recyclable adsorbent for removal of chlorophenols from aqueous solution.

A review on the adsorption of phenols from wastewater onto diverse groups of adsorbents

Phenol and its derivatives are used in numerous industrial processes; these compounds are highly toxic and corrosive, classified as priority pollutants. One of the effective processes for the removal of phenols is adsorption. Numerous and various adsorbents in nature have been researched for this purpose in the past decade. Their adsorption capacities vary from 1 to >1000 mg/g, and are influenced by such factors as the adsorbent’s surface area, pH, temperature, concentration of phenol and surface functional groups, contact time, etc. In this review, adsorbents tested for the removal of phenol and phenol compounds have been classified into four groups: carbonaceous adsorbents, clay and natural mineral adsorbents, polymer-based adsorbents, and novel adsorbents. The highest adsorption capacities were attained by polymer-based adsorbents (>1000 mg/g), whereas natural clays and novel adsorbents showed adsorption capacities of the lower range as compared to the carbonaceous adsorbents. The major advantage of phenol adsorption over other applicable processes is the high potential for phenol recovery and reuse.

Enhanced Adsorption of Selenium Ions from Aqueous Solution Using Iron Oxide Impregnated Carbon Nanotubes

The aim of this research was to investigate the potential of raw and iron oxide impregnated carbon nanotubes (CNTs) as adsorbents for the removal of selenium (Se) ions from wastewater. The original and modified CNTs with different loadings of Fe₂O₃ nanoparticles were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffractometer (XRD), Brunauer, Emmett, and Teller (BET) surface area analyzer, thermogravimetric analysis (TGA), zeta potential, and energy dispersive X-ray spectroscopy (EDS). The adsorption parameters of the selenium ions from water using raw CNTs and iron oxide impregnated carbon nanotubes (CNT-Fe₂O₃) were optimized. Total removal of 1 ppm Se ions from water was achieved when 25 mg of CNTs impregnated with 20 wt.% of iron oxide nanoparticles is used. Freundlich and Langmuir isotherm models were used to study the nature of the adsorption process. Pseudo-first and pseudo-second-order models were employed to study the kinetics of selenium ions adsorption onto the surface of iron oxide impregnated CNTs. Maximum adsorption capacity of the Fe₂O₃ impregnated CNTs, predicted by Langmuir isotherm model, was found to be 111 mg/g. This new finding might revolutionize the adsorption treatment process and application by introducing a new type of nanoadsorbent that has super adsorption capacity towards Se ions.

Carbon Nanotube-Based Chemiresistive Sensors

The development of simple and low-cost chemical sensors is critically important for improving human life. Many types of chemical sensors have been developed. Among them, the chemiresistive sensors receive particular attention because of their simple structure, the ease of high precise measurement and the low cost. This review mainly focuses on carbon nanotube (CNT)-based chemiresistive sensors. We first describe the properties of CNTs and the structure of CNT chemiresistive sensors. Next, the sensing mechanism and the performance parameters of the sensors are discussed. Then, we detail the status of the CNT chemiresistive sensors for detection of different analytes. Lastly, we put forward the remaining challenges for CNT chemiresistive sensors and outlook the possible opportunity for CNT chemiresistive sensors in the future.

A Comparative Study of Raw and Metal Oxide Impregnated Carbon Nanotubes for the Adsorption of Hexavalent Chromium from Aqueous Solution

The present study reports the use of raw, iron oxide, and aluminum oxide impregnated carbon nanotubes (CNTs) for the adsorption of hexavalent chromium (Cr(VI)) ions from aqueous solution. The raw CNTs were impregnated with 1% and 10% loadings (weight %) of iron oxide and aluminum oxide nanoparticles using wet impregnation technique. The synthesized materials were characterized using scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Batch adsorption experiments were performed to assess the removal efficiency of Cr(VI) ions from water and the effects of pH, contact time, adsorbent dosage, and initial concentration of the Cr(VI) ions were investigated. Results of the study revealed that impregnated CNTs achieved significant increase in the removal efficiency of Cr(VI) ions compared to raw CNTs. In fact, both CNTs impregnated with 10% loading of iron and aluminum oxides were able to remove up to 100% of Cr(VI) ions from aqueous solution. Isotherm studies were carried out using Langmuir and Freundlich isotherm models. Adsorption kinetics of Cr(VI) ions from water was found to be well described by the pseudo-second-order model. The results suggest that metallic oxide impregnated CNTs have very good potential application in the removal of Cr(VI) ions from water resulting in better environmental protection.

Adsorption of Toluene and Paraxylene from Aqueous Solution Using Pure and Iron Oxide Impregnated Carbon Nanotubes: Kinetics and Isotherms Study

Multiwall carbon nanotubes (CNTs) and iron oxide impregnated carbon nanotubes (CNTs-iron oxide) were investigated for the adsorption of hazardous toluene and paraxylene (p-xylene) from aqueous solution. Pure CNTs were impregnated with iron oxides nanoparticles using wet impregnation technique. Various characterization techniques including thermogravimetric analysis, scanning electron microscopy, elemental dispersion spectroscopy, X-ray diffraction, and nitrogen adsorption analysis were used to study the thermal degradation, surface morphology, purity, and surface area of the materials. Batch adsorption experiments show that iron oxide impregnated CNTs have higher degree of removal of p-xylene (i.e., 90%) compared with toluene (i.e., 70%), for soaking time 2 h, with pollutant initial concentration 100 ppm, at pH 6 and shaking speed of 200 rpm at 25°C. Pseudo-second-order model provides better fitting for the toluene and p-xylene adsorption. Langmuir and Freundlich isotherm models demonstrate good fitting for the adsorption data of toluene and p-xylene.

Preparation of carbon nanotubes/porous polyimide composites for effective adsorption of 2,4-dichlorophenol

The carbon nanotubes (CNT)/polyimide (PI) composites were prepared by blending and characterized by Fourier transform infrared spectrometer (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and N₂adsorption–desorption.

Phenol adsorption from aqueous solutions by functionalized multiwalled carbon nanotubes with a pyrazoline derivative in the presence of ultrasound

MWCNT-Py indicated a high adsorption capacity for phenol in comparison with MWCNT-COOH.