Evaluating magnetic nano-ferrofluid as a novel coagulant for surface water treatment

Advanced nanoribbons in water purification: A comprehensive review

The increasing scarcity of clean water, coupled with the environmental repercussions of municipal and industrial wastewater, underscores the imperative for advancing novel technologies aimed at clean water production and effectively removing impurities and toxic contaminants. Research focusing on ribbon-based technologies has garnered substantial attention in recent years due to their promising applications in various fields. This article presents a comprehensive review of the diverse applications of ribbon in water and wastewater treatment. It delves into the various types of ribbon employed for water purification, elucidating their effectiveness in removing contaminants such as heavy metals, dyes, pesticides, medical waste, oil pollutants, and radioactive waste. We will also discuss methods such as adsorption, membrane separation, and advanced oxidation processes, which help to understand how ribbons remove pollutants from water. This review summarizes the recent progress in the field of water purification and discusses the current state-of-the-art research on the use of ribbons in wastewater treatment. The end of this article gives information about the regeneration and reusability of ribbons and about challenges and prospects.

A Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices

Sustainable development is a big global challenge for the 21st century. In recent years, a class of emerging contaminants known as microplastics (MPs) has been identified as a significant pollutant with the potential to harm ecosystems. These small plastic particles have been found in every compartment of the planet, with aquatic habitats serving as the ultimate sink. The challenge to extract MPs from different environmental matrices is a tangible and imperative issue. One of the primary specialties of research in environmental chemistry is the development of simple, rapid, low-cost, sensitive, and selective analytical methods for the extraction and identification of MPs in the environment. The present review describes the developments in MP extraction methods from complex environmental matrices. All existing methodologies (new, old, and proof-of-concept) are discussed and evaluated for their potential usefulness to extract MPs from various biotic and abiotic matrices for the sake of progress and innovation. This study concludes by addressing the current challenges and outlining future research objectives aimed at combating MP pollution. Additionally, a set of recommendations is provided to assist researchers in selecting appropriate analytical techniques for obtaining accurate results. To facilitate this process, a proposed roadmap for MP extraction is presented, considering the specific environmental compartments under investigation. By following this roadmap, researchers can enhance their understanding of MP pollution and contribute to effective mitigation strategies.

An automated algorithm for the determination of oil absorption strategy of magnetic nanoparticles from SEM images

In recent years, the magnetic iron oxide nanoparticles (MNPs) are employed as efficient absorbents for oil removal from water. In this research, the particle size (diameter) obtained from Scanning Electron Microscopy (SEM) images of MNPs, before and after oil-absorption, are utilized to determine the oil-absorption capacity. However, the manual evaluation of the particle size and particle size distribution (PSD) are highly time-consuming and needs expertised people for accurate analysis. Hence, an image processing algorithm is employed for the determination of particle size and PSD from the Scanning Electron Microscopy (SEM) images. The key objective revolves with the preparation of the Maleic Anhydride Grafted Polypropylene anchored Magnetic Nanoparticles (MAPP-a-MNPs) to absorb crude oil from the marine water. The shape, size, and size distribution of MAPP-a-MNPs were assessed by both manual and automated analysis. For this purpose, expertise people help with the manual analysis and Threshold Adaptive-Canny Edge Detection (TA-CED) and Accumulator Updated-Circular Hough Transform (AU-CHT) method is employed for automated analysis. All the automated process were conducted in MATLAB and the measurements were taken for both before and after the oil absorption images. These measurements aid us to determine the quantity of oil absorbed by MAPP-a-MNPs. The results demonstrates excellent oil removal capacity of MAPP-a-MNPs.

Magnetic Field Effect on Coagulation Treatment of Wastewater Using Magnetite Rice Starch and Aluminium Sulfate

The use of synthetic coagulants to reduce suspended particles from drinkable water and wastewater is prompting new issues because it poses many health and environmental risks. Hence, improving the coagulation process using sophisticated nanotechnology with a magnetic field (MF) for quick recoverability emerges as being useful. In this study, the effects of magnetite rice starch (MS) and aluminum sulfate (alum) were investigated at a constant dose (3 g or 3000 mg/L) using a Jar test (six beakers) as potential low-cost coagulants for industrial wastewater treatment. At a high magnification of 1000× and a surface pore size of 298 µm, scanning electron microscopy and energy dispersive X-ray (SEM/EDX) analyses were utilized to elucidate the morphology of the coagulants. Coagulation was performed at 150 rpm (quick mixing) for 2 min, and 30 rpm (slow mixing) for 15 min. Thereafter, samples were allowed to settle (10-60 min) with and without MF. The findings showed more than 65% contaminants removal (turbidity and TSS) and 30% chemical oxygen demand (COD) removal using alum while MS showed 80% contaminants removal (turbidity and TSS) and 50% COD removal. MS showed an increase of more than 3% in contaminants removal (COD, turbidity, and TSS) when exposed to MF. As a result, the use of MS together with MF in water and wastewater treatment is anticipated as an environmentally benign and effective coagulant.

Iron Oxide Nanoparticle-Based Ferro-Nanofluids for Advanced Technological Applications

Iron oxide nanoparticle (ION)-based ferro-nanofluids (FNs) have been used for different technological applications owing to their excellent magneto-rheological properties. A comprehensive overview of the current advancement of FNs based on IONs for various engineering applications is unquestionably necessary. Hence, in this review article, various important advanced technological applications of ION-based FNs concerning different engineering fields are critically summarized. The chemical engineering applications are mainly focused on mass transfer processes. Similarly, the electrical and electronics engineering applications are mainly focused on magnetic field sensors, FN-based temperature sensors and tilt sensors, microelectromechanical systems (MEMS) and on-chip components, actuators, and cooling for electronic devices and photovoltaic thermal systems. On the other hand, environmental engineering applications encompass water and air purification. Moreover, mechanical engineering or magneto-rheological applications include dampers and sealings. This review article provides up-to-date information related to the technological advancements and emerging trends in ION-based FN research concerning various engineering fields, as well as discusses the challenges and future perspectives.

Effect of Magnetized Coagulants on Wastewater Treatment: Rice Starch and Chitosan Ratios Evaluation

Coagulation with synthetic chemicals has been used to treat a wide range of industrial effluents. Herein, the unique characteristics of industrial effluents being detrimental to the environment warrants urgent resource-efficient and eco-friendly solutions. Therefore, the study investigated the use of two magnetized coagulants (chitosan magnetite (CF) and rice starch magnetite (RF)), prepared via co-precipitation in three different ratios (1:2, 1:1 and 2:1) of natural coagulants (chitosan or rice starch) and magnetite nanoparticles (F) as alternative coagulants to alum for the treatment of wastewater. A Brunauer–Emmett–Teller (BET) analyzer, an X-ray diffraction (XRD) analyzer, and energy-dispersive X-ray (EDX) spectroscopy were used to characterize the surface area, crystal structure, and elemental composition of the coagulants. The influences of settling time (10–60 min) on the reduction of turbidity, color, phosphate, and absorbance were studied. This was carried out with a jar test coupled with six beakers operated under coagulation conditions of rapid stirring (150 rpm) and gentle stirring (30 rpm). Wastewater with an initial concentration of 45.6 NTU turbidity, 315 Pt. Co color, 1.18 mg/L phosphate, 352 mg/L chemical oxygen demand (COD), and 73.4% absorbance was used. The RF with a ratio of 1:1 was found to be the best magnetized coagulant with over 80% contaminant removal and 90% absorbance. The treatability performance of RF (1:1) has clearly demonstrated that it is feasible for wastewater treatment.

Wastewater Treatment Using Novel Magnetic Nanosponges

Modern agricultural activities and concentrated animal feeding operations (CAFOs) are two of the major sources of groundwater contamination that affect the quality of drinking water. Conventional water quality improvement methods include direct filtration, coagulation/settling treatment techniques, membrane-based systems, and absorption-based systems. However, to date, there are no efficient and cost-effective processes available for water treatment. This study developed an innovative nanotechnology-based technique to improve groundwater quality. Magnetic nanosponges (MNSs) were synthesized and characterized using two different magnetic nanoparticles along with polymeric coagulants. The efficiency of MNSs in removing pollutants in wastewater collected from local diary and swine CAFO lagoons was investigated. Standard water quality evaluation parameters, such as the total organic content (TOC), turbidity, total suspended solids (TSS), and biological oxygen demand (BOD), were measured prior to and after treatment with MNSs. The results demonstrate the potential of MNSs to improve the quality of groundwater and support the development of a cost-effective best management practice (BMP) that also employs traditional coagulants at CAFOs and other wastewater treatment plants.

Approaches on Ferrofluid Synthesis and Applications: Current Status and Future Perspectives

Ferrofluids are colloidal suspensions of iron oxide nanoparticles (IONPs) within aqueous or nonaqueous liquids that exhibit strong magnetic properties. These magnetic properties allow ferrofluids to be manipulated and controlled when exposed to magnetic fields. This review aims to provide the current scope and research opportunities regarding the methods of synthesis of nanoparticles, surfactants, and carrier liquids for ferrofluid production, along with the rheology and applications of ferrofluids within the fields of medicine, water treatment, and mechanical engineering. A ferrofluid is composed of IONPs, a surfactant that coats the magnetic IONPs to prevent agglomeration, and a carrier liquid that suspends the IONPs. Coprecipitation and thermal decomposition are the main methods used for the synthesis of IONPs. Despite the fact that thermal decomposition provides precise control on the nanoparticle size, coprecipitation is the most used method, even when the oxidation of iron can occur. This oxidation alters the ratio of maghemite/magnetite, influencing the magnetic properties of ferrofluids. Strategies to overcome iron oxidation have been proposed, such as the use of an inert atmosphere, adjusting the Fe(II) and Fe(III) ratio to 1:2, and the exploration of other metals with the oxidation state +2. Surfactants and carrier liquids are chosen according to the ferrofluid application to ensure stability. Hence, a compatible carrier liquid (polar or nonpolar) is selected, and then, a surfactant, mainly a polymer, is embedded in the IONPs, providing a steric barrier. Due to the variety of surfactants and carrier liquids, the rheological properties of ferrofluids are an important response variable evaluated when synthesizing ferrofluids. There are many reported applications of ferrofluids, including biosensing, medical imaging, medicinal therapy, magnetic nanoemulsions, and magnetic impedance. Other applications include water treatment, energy harvesting and transfer, and vibration control. To progress from synthesis to applications, research is still ongoing to ensure control of the ferrofluids' properties.

Kinetics and Nanoparticle Catalytic Enhancement of Biogas Production from Wastewater Using a Magnetized Biochemical Methane Potential (MBMP) System

This study presents magnetized nanoparticles (NPs) as a catalyst to accelerate anaerobic digestion (AD) potential for clean and ecofriendly energy (biogas) from wastewater settings. The effects of iron oxides (Ms) and aluminum sulphate (Alum) were investigated using two chronological experiments: (i) the Jar test technique to generate residue slurry as organic fertilizer potential and (ii) a magnetized biochemical methane potential (MBMP) system for biogas production at mesophilic conditions for 21 days. X-ray diffraction and Fourier Transform Infrared spectroscopy were carried out to establish the Ms Crystallite and active functional groups respectively. Scanning electronic microscopy coupled with energy dispersive X-ray spectrometer and elemental analysis were used to track and confirm NPs inclusion after the post-AD process. Coagulation at 50 mg/L and magnetic exposure time of 30 min showed above 85% treatability performance by Ms as compared to 70% for Alum. Owing to the slow kinetics of the AD process, additional NPs content in the digesters coupled with an external magnetic field improved their performance. Cumulative biogas yields of 1460 mL/d > 610 mL/d > 505 mL/d for Ms > Control > Alum respectively representing 80% > 61% > 52% of CH4 were attained. The modified Gompertz model shows that the presence of NPs shortens the lag phase of the control system with kinetics rate constants of 0.285 1/d (control) to 0.127 1/d (Ms) < 0.195 1/d (Alum).

Multifunctional Magnetic Oxide Nanoparticle (MNP) Core-Shell: Review of Synthesis, Structural Studies and Application for Wastewater Treatment

The demand for water is predicted to increase significantly over the coming decades; thus, there is a need to develop an inclusive wastewater decontaminator for the effective management and conservation of water. Magnetic oxide nanocomposites have great potentials as global and novel remediators for wastewater treatment, with robust environmental and economic gains. Environment-responsive nanocomposites would offer wide flexibility to harvest and utilize massive untapped natural energy sources to drive a green economy in tandem with the United Nations Sustainable Development Goals. Recent attempts to engineer smart magnetic oxide nanocomposites for wastewater treatment has been reported by several researchers. However, the magnetic properties of superparamagnetic nanocomposite materials and their adsorption properties nexus as fundamental to the design of recyclable nanomaterials are desirable for industrial application. The potentials of facile magnetic recovery, ease of functionalization, reusability, solar responsiveness, biocompatibility and ergonomic design promote the application of magnetic oxide nanocomposites in wastewater treatment. The review makes a holistic attempt to explore magnetic oxide nanocomposites for wastewater treatment; futuristic smart magnetic oxides as an elixir to global water scarcity is expounded. Desirable adsorption parameters and properties of magnetic oxides nanocomposites are explored while considering their fate in biological and environmental media.

Application of magnetic coagulant based on fractionated protein of Moringa oleifera Lam. seeds for aqueous solutions treatment containing synthetic dyes

The aim of the present study was to evaluate the efficiency of a new magnetic coagulant, obtained from Moringa oleifera seeds protein functionalized with iron oxide nanoparticles to remove four anionic synthetic dyes with coagulation/flocculation assays followed by magnetic sedimentation. The results showed that the presence of a magnetic field during sedimentation considerably accelerates the separation and increases the dye removal efficiency. Amaranth dye removal increased from 45 to 86% and Sunset Yellow from 15 to 69% with the presence of magnetic field, while Reactive Black 5 and Brilliant Blue reached 94% and 52% removal, respectively. For AM and SY dyes, the best protein concentration is 150 mg L^-1, for RB5 dye is 115 mg L^-1, and for BB dye is 75 mg L^-1. The sedimentation time decreased from 30 to 5 min with magnetic sedimentation. The residual value of AM dye decreased from 10.76 mg L^-1 to approximately 2.71 mg L^-1, and with SY the residual concentration decreased from approximately 16.79 mg L^-1 to 6.36 mg L^-1. The removal of BB and RB5 dyes reached an approximate final value of 48.2 mg L^-1 (52%) and 1.18 mg L^-1 (94%).

Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure. As an important treatment method for emulsions, chemical demulsification is faced with challenges such as low flocs-water separation rates and high sludge production. Hence, in this study, Fe₃O₄ magnetic nanoparticles (MNPs) were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field. The addition of MNPs significantly decreased the time required to attain sludge-water separation and sludge compression equilibrium, from 210 to 20 min. In addition, the volume percentage of sludge produced at the equilibrium state was reduced from 45% to 10%. This excellent flocculation-separation performance was stable over a pH range of 3-11. The magnetization of the flocculants and oil droplets to form a flocculant-MNP-oil droplet composite, and the magnetic transfer of the composite were two key processes that enhanced the separation of cutting emulsions. Specifically, the interactions among MNPs, flocculants, and oil droplets were important in the magnetization process, which was controlled by the structures and properties of the three components. Under the magnetic field, the magnetized flocculant-MNP-oil droplet composites were considerably accelerated and separated from water, and the sludge was simultaneously compressed. Thus, this study expands the applicability of magnetic separation techniques in the treatment of complex waste cutting emulsions.

An automatic algorithm for determination of the nanoparticles from TEM images using circular hough transform

Nanoparticles have a wide range of applications in science and technology, and the size distribution of nanoparticles is one of the most important statistical properties. Transmission electron microscopy (TEM) or X-ray diffraction is commonly used for the characterization and measuring particle size distributions, but manual analysis of the micrographs is extremely labor-intensive. Here, we have developed an image processing algorithm for measuring particle size distributions from TEM images in the presence of overlapped particles and uneven background. The approach is based on the modified circular Hough transform, and pre and post processing techniques on TEM image to improve the accuracy and increase the detection rate of the nano particles. Its application is presented through several images with different noises, uneven backgrounds and over lapped particles. The merits of this robust quantifying method are demonstrated by comparing the results with the data obtained through manual measurement. The algorithm allows particles to be detected and characterized with high accuracy.