Kinetic study of nickel-glycylglycine with ninhydrin in alkanediyl-α,ω-gemini (m- s -m type) surfactant system

Conductometric investigation of nano MnSO4 association parameters and complex formation with glycylglycine in aqueous and methanol-water mixtures: Thermodynamic parameters and potential applications

This study aimed to investigate the ion pair association values and association parameters of nano MnSO4 in water and methanol-water mixtures (20 % and 40 % methanol by mass percentage) at varying temperatures (298.15, 303.15, 308.15, and 313.15 K) using the conductometric technique. Additionally, the parameters for complex formation between nano MnSO4 and glycylglycine as a ligand were determined. The focus was on elucidating the thermodynamic formation parameters for the nano Mn2+-glycylglycine interaction, with particular emphasis on comparing the 1: 1 and 1: 2 (M: L) complexes to understand the complexation behavior more comprehensively. The results indicated that the complexation process was spontaneous, as evidenced by negative ΔGf (formation free energy change) values, which increased with temperature, highlighting the enhanced spontaneity of the process. The findings provide valuable insights into designing new materials and procedures by enhancing our understanding of the complexation behavior of nano MnSO4 with ligands like glycylglycine, thus contributing to advancements in various applications such as chemical synthesis, medicines, and environmental remediation. By elucidating the thermodynamic aspects of these interactions, the study aimed to provide valuable information that could be utilized in practical applications and further research endeavors.

Scrutinizing Self-Assembly, Surface Activity and Aggregation Behavior of Mixtures of Imidazolium Based Ionic Liquids and Surfactants: A Comprehensive Review

The desire of improving various processes like enhanced oil recovery (EOR), water treatment technologies, biomass extraction, organic synthesis, carbon capture etc. in which conventional surfactants have been traditionally utilized; prompted various researchers to explore the self-assembly and aggregation behavior of different kinds of surface-active molecules. Ionic liquids (ILs) with long alkyl chain present in their structure constitute the advantageous properties of surfactant and ILs, hence termed as surface-active ionic liquids (SAILs). The addition of ILs and SAILs significantly influence the surface-activity and aggregation behavior of industrially useful conventional surfactants. After a brief review of ILs, SAILs and surfactants, the prime focus is made on analyzing the self-assembly of SAILs and the mixed micellization behavior of conventional surfactants with different ILs.

A Comparative Spectral Study on the Interaction of Organic Dye Congo-Red with Selective Aqueous Micellar Media of CPC, Rhamnolipids and Saponin

The present study is an investigation of the solubilising ability of natural and conventional surfactants saponin (sapindus saponin or reetha saponin), Rhamnolipids (RLs) and N-cetylpyridinium chloride (CPC) respectively via dye-surfactant interaction. The ionic dye Congo Red was examined by absorption spectroscopy method for the study. The dye interacted strongly with oppositely charged surfactant N-cetylpyridinium chloride in the pre-micellar concentration range and formed a stable dye-surfactant complex. The thermodynamic parameter, free energy change for all the systems was calculated at a constant temperature of 25°C. The ΔG0 value for N-cetylpyridinium chloride is found to be −33.269 kJ/mol while for saponin and rhamnolipids the values were −16.084 kJ/mol and −26.006 kJ/mol respectively. The values clearly indicate the efficiency of N-cetylpyridinium chloride surfactant compared to the other two surfactants. The present study aims to understand the dye solubilization in surfactant media in order to develop environmentally friendly, green and cost effective techniques.

Kinetic study of the metal-dipeptide complex with ninhydrin facilitated by gemini (m-s-m) surfactant micelles

The three Gemini (m-s-m; m (head group) = 16 and s (spacer) = 4, 5, 6) surfactants have been synthesized and their impact on reaction of zinc(II)-glycylleucine complex ([Zn(II)-Gly-Leu]⁺) and ninhydrin were studied at temperature (343 K) and pH (5.0) using spectroscopic method. Influence of several factors, viz., [Zn(II)-Gly-Leu]⁺, [ninhydrin], temperature and pH were also carried out on title reaction in geminis. Rates of reaction are the first-order path in concentration of [Zn(II)-Gly-Leu]⁺ complex and fractional order path in concentration of ninhydrin. The catalysis of gemini 16-s-16 surfactant micelles was investigated below and above their critical micelle concentration (cmc) value and detailed elaboration were provided in the text. In the present case, rate constants, k_ψ, increased on increasing geminis ([gemini] are below their cmc, region I) and stayed nearly constant (region II). The shape of (region I and II) surfactants ([gemini] = 0 to 400 × 10^-5 mol dm^-3) are similar to a cetyltrimethylammonium bromide, CTAB (single hydrophilic head group and hydrophobic part). Later, a sharp increment in rate was observed with higher [gemini] (region III, (Fig. 5). The study was catalyzed and accelerated quite enough by geminis (at concentrations below their cmc) compared to aqueous. An appropriate mechanism has been proposed for accounting for the distribution of reactants between aqueous and micellar pseudo phases. Resulting kinetic data were used to determine the binding constants of micelle-substrate (K_B) and micelle-ninhydrin (K_Nin).

Catalytic influence of 16-s-16 gemini surfactants on the rate constant of histidine and ninhydrin

The present paper reports the catalytic influence of 16-s-16 (spacer (s) = 4, 5, 6) gemini surfactants on the rate constant of histidine and ninhydrin at 343 K and pH 5.0 using the spectrophotometric technique. The effect of varying amounts of geminis was made on the rate constant of histidine and ninhydrin keeping other constituents constant. Characteristics of the rate constant (kψ ) versus [gemini] depict the effect of surfactants on the rate constant. A systematic explanation about the effect of surfactants is revealed and discussed in the text. The influence of different parameters that includes [reactants], temperature and pH has also been performed on the study. In order to determine the critical micelle concentration (cmc) of pure surfactants and their solution mixtures, conductivity measurement was employed. By using the Eyring equation, activation parameters at different temperatures have been obtained. The resultant data of kψ versus [gemini] plot were rationalized with the pseudo-phase model of micelles.

Influence of Cationic Cetyltrimethylammonium Bromide on Rate of Zn(II)-Histidine Complex and Ninhydrin

Paper analyses the influence of cationic cetyltrimethylammonium bromide on rate of Zn(II)-histidine and ninhydrin. UV-visible spectroscopy was applied to note absorbance of Zn(II)-histidine complex with ninhydrin at the end of reaction in the two systems. Rate constant, k_obs, (in aqueous) and rate constant, k_ψ, (in cetyltrimethylammonium bromide, CTAB) were determined by computer software. Reactions depict first-order in Zn(II)-histidine concentration and fractional-order in ninhydrin concentration in aqueous and micellar media. The results achieved indicate that the reactions take place principally by the same reaction mechanism in both the media. Critical micelle concentration of CTAB surfactant was calculated by recording the conductivity as a function of surfactant concentrations. Influence of various amounts of surfactant on Zn(II)-histidine complex and ninhydrin reaction was performed under different reaction conditions. Reaction was catalyzed and accelerated efficiently by surfactant medium compared to aqueous medium. The observed influence of surfactant on rate has been mentioned in details and their quantitative treatment of kinetic results have been deduced by the means of Menger and Portnoy model for micellar catalysis.

Application of Oxidative Fatty Acid Esters in Amino Acid Surfactants

The amino acid surfactants were synthesized by using natural fatty acid esters (FAE) as raw materials, but FAE with a high iodine value has thermal and oxidative instabilities in chemical reactions. The oxidation of FAE by peroxyacetic acid generated was studied under various conditions, then the oxidized FAE and different amino acids (glycine, glutamic acid and aspartic acid) were used to form sodium N-acyl amino acids in glycerol. By the surface tension method, the relationship between temperature and critical micelle concentration (CMC) has been researched. The CMC value, the surface tension at the CMC (γCMC), and the maximum surface excess concentration Γmax were calculated, respectively. For different amino acids surfactants, the surface tension of the solution was greatly reduced at the low CMC value, and the γCMC constantly decreases with rising temperature.

Study of Zinc-glycylglycine Complex with Ninhydrin in Aqueous and Cationic Micellar Media: A Spectrophotometric Technique

Studies of the interaction between the zinc-peptide complex ([Zn(II)-Gly-Gly]+) and ninhydrin in aqueous and CTAB surfactant media were executed by the means of UV-visible spectrophotometry. The reaction rates (k obs and k ψ) were determined in both media by varying different parameters such as pH, temperature and the concentration of the reactants and CTAB. The micellar binding constants and activation parameters were also calculated. The catalytic activity in the CTAB medium was found to be better than in the aqueous medium on the title reaction. The catalysis by CTAB is treated quantitatively by applying the model of the kinetic pseudo-phase of the micelle. Variation of the rate constant with the change of the CTAB concentration was used for the calculation of several kinetic parameters such as the binding constants (K B and K Nin) and the micellar rate constant k m. On basis of the experimental results, a probable mechanism is proposed.

Aggregation and interfacial phenomenon of amphiphilic drug under the influence of pharmaceutical excipients (green/biocompatible gemini surfactant)

In the current study, we have examined the interaction amongst an antidepressant drug amitriptyline hydrochloride (AMH) and ethane-1, 2-diyl bis(N,N-dimethyl-N-cetylammoniumacetoxy) dichloride (16-E2-16, a green gemini surfactant) through tensiometric and fluorimetric techniques in aqueous/electrolyte/urea solutions. Significant variations are observed in the various evaluated parameters in the present study. Gemini 16-E2-16 has outstanding surface properties along with a much lower cmc value, demonstrating very little toxicity as well as considerable antimicrobial activity. The cmc values of mixtures decrease through increase in mole fraction (α₁) of 16-E2-16, which specifies the nonideality of the solution mixtures, along with demonstrating the occurrence of mixed micellization too. Negative β^Rub values signify on the whole attractive force of interaction between constituents of mixed micelles. Owing to the incidence of electrolyte NaCl (50 mmol.kg^–1), lowering of the micelles’ surface charge happens, resulting in aggregation taking place at lower concentration while the presence of urea (NH₂CONH₂) halts micellization taking place, which means the cmc value increases in the attendance of urea. The ΔGmo values for all systems were negative along with the presence of electrolyte/urea. The excess free energy (G_ex) of studied mixed systems was also estimated and found to be negative for all the systems. Using the fluorescence quenching method, the micelle aggregation number (N_agg) was evaluated and it was found that the contribution of gemini surfactant was always more than that of the AMH and their value enhances in the existence of electrolyte while decreasing in the attendance of NH₂CONH₂ in the system. In addition, other fluorescence parameters such as micropolarity (I₁/I₃), dielectric constant (D_exp) as well as Stern–Volmer binding constants (K_sv) of mixed systems were evaluated and the results showed the synergistic performance of the AMH + 16-E2-16 mixtures. Along with tensiometric and fluorimetric techniques, FT-IR spectroscopy was also engaged to reveal the interaction among constituents.

Study of the reaction of ninhydrin with tyrosine in gemini micellar media

This paper reports the study of the ninhydrin and l-tyrosine (Tyr) reaction in gemini micellar media. The aim of the study was to see the influence of different parameters on the reaction rate, including the influence of reactant concentration, temperature and pH. Spectrophotometric and conductometric techniques were employed to record the absorption of the product formed and cmc values as a function of the surfactants, respectively. The effect of varied surfactant concentrations on the reaction rate was also investigated. The quantitative treatment of the rate constant (k_ψ) vs. surfactant concentration was carried out on the basis of the pseudo-phase model suggested by Martinek et al., Menger and Portnoy, and established by Bunton. Micellar binding parameters and thermodynamic parameters have been calculated and are discussed in detail. A plausible reaction mechanism that is consistent with observed kinetic data has been proposed.

The importance of the study increased due to the use of a very small quantity of gemini surfactant required to perform the reaction.

Combining high performance fertiliser with surfactants to reduce the reverse solute flux in the fertiliser drawn forward osmosis process

Solutions to mitigate the reverse diffusion of solutes are critical to the successful commercialisation of the fertiliser drawn forward osmosis process. In this study, we proposed to combine a high performance fertiliser (i.e., ammonium sulfate or SOA) with surfactants as additives as an approach to reduce the reverse diffusion of ammonium ions. Results showed that combining SOA with both anionic and non-ionic surfactants can help in reducing the reverse salt diffusion by up to 67%. We hypothesised that, hydrophobic interactions between the surfactant tails and the membrane surface likely constricted membrane pores resulting in increased rejection of ions with large hydrated radii such as SO₄^2-. By electroneutrality, the rejection of the counter ions (i.e., NH₄⁺) also therefore subsequently improved. Anionic surfactant was found to further decrease the reverse salt diffusion due to electrostatic repulsions between the surfactant negatively-charged heads and SO₄^2-. However, when the feed solution contains cations with small hydrated radii (e.g., Na⁺); it was found that NH₄⁺ ions can be substituted in the DS to maintain its electroneutrality and thus the diffusion of NH₄⁺ to the feed solution was increased.

Unveiling the Aggregation Behavior of Doxorubicin Hydrochloride in Aqueous Solution of 1-Octyl-3-methylimidazolium Chloride and the Effect of Bile Salt on These Aggregates: A Microscopic Study

In this article, we have unveiled the aggregation behavior of a potent chemotherapeutic drug, doxorubicin hydrochloride (Dox) in a well-known imidazolium based surface active ionic liquid (SAIL), 1-octyl-3-methylimidazolium chloride (C₈mimCl). The aggregates formed by Dox in C₈mimCl have been characterized using dynamic light scattering (DLS), fluorescence lifetime imaging microscopy (FLIM), high-resolution transmission electron microscopy (HR-TEM), analytical transmission electron microscopy (analytical TEM), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and Fourier-transform infrared spectroscopy (FTIR) measurements. It is found that Dox forms large spherical aggregates in the presence of C₈mimCl SAIL. We have also explored the driving force behind this aggregation behavior of Dox in C₈mimCl. Furthermore, it is observed that in the presence of a common bile salt, sodium cholate (NaCh), Dox/C₈mimCl spherical aggregates disrupt to form rodlike fibrillar aggregates. Therefore, formation of spherical aggregates and also its disruption into rodlike fibrillar aggregates have been performed, and this is expected to open a new scope for the design of a new generation smart drug delivery system where the drug itself aggregates to form the delivery system.