An effervescence tablet-assisted switchable solvent-based microextraction: On-site preconcentration of steroid hormones in water samples followed by HPLC-UV determination

Portable one-step effervescence tablet-based microextraction combined with smartphone digital image colorimetry: Toward field and rapid detection of trace nickel ion

In this study, the one-step switchable hydrophilic solvent (SHS)-based effervescence tablet microextraction (ETME) was coupled with smartphone digital image colorimetry (SDIC) for the field detection of nickel ion (Ni2+) for the first time. Both extractant and CO2 were generated in situ when the novel SHS-based effervescence tablet was placed in the sample solution. The complexant 1-(2-pyridinylazo)-2-naphthaleno (PAN) dissolved from the effervescence tablet to form a stable complex with Ni2+, and the extractant was uniformly dispersed in the sample solution under the action of CO2 and fully in contact with Ni-PAN, which enabled efficient extraction of Ni2+. The color changes of the extraction phase were captured by smartphone, then a quantitative relationship between the concentrations of Ni2+ and color intensity of images captured using a smartphone was established by customized applet WASDIC, which realized quantitative analysis of Ni2+ in different samples. Under optimal conditions, the enhancement factor (EF) of the proposed method was 65.1, the limit of detection (LOD) and limit of quantification (LOQ) were 1.69 and 5.64 μg L-1, respectively. The developed method was successfully applied to the detection of trace Ni2+ in the environmental samples and natural medicines. And the applicability of the method for use in field analysis was validated.

Occurrence, efficiency of treatment processes, source apportionment and human health risk assessment of pharmaceuticals and xenoestrogen compounds in tap water from some Ghanaian communities

The occurrence of pharmaceuticals and xenoestrogen compounds (PXCs) in drinking water presents a dire human health risk challenge. The problem stems from the high anthropogenic pollution load on source water and the inefficiencies of the conventional water treatment plants in treating PXCs. This study assessed the PXCs levels and the consequential health risks of exposure to tap water from selected Ghanaian communities as well as that of raw water samples from the respective treatment plants. Thus the PXCs treatment efficiency of two drinking water treatment plants in the metropolises studied was also assessed. The study also conducted source apportionment of the PXCs in the tap water. Twenty six (26) tap and raw water samples from communities in the Cape Coast and Sekondi-Takoradi metropolises were extracted using SPE cartridges and analysed for PXCs using Ultra-fast-HPLC-UV instrument. Elevated levels of PXCs up to 24.79 and 22.02 μg/L were respectively recorded in raw and tap water samples from the metropolises. Consequently, elevated non-cancer health risk (HI > 1) to residential adults were found for tap water samples from Cape Coast metropolis and also for some samples from Sekondi-Takoradi metropolis. Again, elevated cumulative oral cancer risks >10-5 and dermal cancer risk up to 4 × 10-5 were recorded. The source apportionment revealed three significant sources of PXCs in tap water samples studied. The results revealed the inefficiency of the treatment plants in removing PXCs from the raw water during treatments. The situation thus requires urgent attention to ameliorate it, safeguarding public health. It is recommended that the conventional water treatment process employed be augmented with advanced treatment technologies to improve their efficacy in PXCs treatment.

In-syringe homogeneous liquid-phase microextraction followed by filtration-based phase separation for on-site extraction of chloroanilines from water samples

This study introduces a new in-syringe homogeneous liquid-phase microextraction method for the rapid on-site extraction of chloroanilines from water samples. Extraction was performed using a plastic syringe, eliminating the use of any electrical power source. Di-(2-ethylhexyl) phosphoric acid (DEHPA) served as the extractant. The process initially involved dissolving DEHPA in an alkaline solution to obtain a homogeneous solution. Subsequently, the sodium salt of DEHPA was precipitated by salting-out, and the resulting heterogeneous mixture was filtered using a syringe filter. The precipitate containing the analytes was then dissolved in methanol for analysis by high-performance liquid chromatography. Under optimal conditions, extraction recovery for chloroanilines ranged from 26% to 71%. Method linearity was evaluated within a concentration range of 1.0-100 µg/L, resulting in coefficients of determination exceeding 0.9987 for all analytes. Method detection limits ranged from 0.28 to 0.41 µg/L. Intra and inter-day precision values were below 9.5% and 10.8%, respectively. The developed method was applied to determine chloroanilines in real waters, yielding acceptable recoveries ranging from 80% to 109% for spiked tap, rain, and stream waters. Additionally, the method was successfully employed for on-site extraction of target contaminants, demonstrating no statistically significant differences compared to laboratory results.

The role of sustainable materials in sample preparation

Sample preparation is a constantly evolving step in the measurement process with a positive effect on its performance. Its evolution has been marked by an underlying environmental commitment, with simplification, miniaturization, and automation being three of its driving forces. This trends article deepens how the sample preparation can go sustainable through the efficient design of new sorptive materials, either liquid or solid. This objective can be achieved by using natural and/or biodegradable materials as precursors of the functional sorptive phases and by designing materials that simplify the procedures (thus reducing the energy or resources required). Although environmental performance is a crucial aspect of a new material, its applicability is what really defines its incorporation into the sample preparation toolbox. For this reason, their characteristics and more relevant applications will be briefly presented to conclude with the tendency of their use in the very near future.

Application of Recently used Green Solvents in Sample Preparation Techniques: A Comprehensive Review of Existing Trends, Challenges, and Future Opportunities

Green solvents (GSs) has gained significant attention in recent years due to their potential as safer and more sustainable alternatives to traditional organic solvents. Solvents are used in a wide range of applications, from industrial processes to everyday products. Solvent emissions and losses can have a significant impact on the environment and human health, which is why many initiatives are being undertaken to get rid of or switch to eco-friendly alternatives. A key area of green chemistry that led to the concept of "green" solvents is the development of alternative solvents that are less toxic and more environmentally friendly than traditional organic solvents. The advantages of using green solvents over conventional ones are their environmental friendliness, biocompatibility, biodegradability, and simplicity of preparation. Different sample preparation techniques have successfully utilized green solvents to offer a sustainable separation media for the extraction of a variety of inorganic and organic compounds which are crucial for research in environmental samples. Recent developments in green analytical chemistry (GAC) have focused on how to prepare and use samples using environmentally sustainable solvents. The current study covers the advance and currently used green solvents with an emphasis on environmentally friendly sample preparation methods. This review aims to briefly summarize the current state of knowledge about the use of green solvents particularly ionic liquids, deep eutectic solvents and switchable solvents (SSs) with the perspective of GAC in sample preparation methods.

Dummy-template Pickering emulsion imprinted microspheres online pretreatment and analysis for the estrogens in cosmetics

Estrogens are a class of steroid hormone with strong physiological activity. Due to the pronounced beauty effect, such drugs are highly susceptible to illegal addition and cause other adverse effects. To avoid template leakage and the negative impacts on the environment caused by the estrogens, diosgenin was selected as the dummy template due to its similar skeleton structure. The Pickering emulsion polymerization was used to obtain the dummy-template molecularly imprinted polymers (dt-MIPs). Scanning electron microscopy, optical microscopy, specific surface area testing, Fourier transform infrared spectroscopy and adsorption experiments were used to characterize the apparent morphology and the recognition performance of the microspheres. Then, the prepared microspheres and commercial fillers were used to construct an on-line solid phase extraction (on-line SPE) analytical system coupled with HPLC via a two-position switching valve. On-line solid phase extraction-HPLC analytical methods were established and verified, for the simultaneous determination of four estrogens in cosmetic samples. The accuracy and precision RSDs for the established methods using the imprinted sorbents were 92.00-104.02% and less than 9.12%, respectively. All four estrogens exhibited good linearity in the range of 0.05 to 5 µg/mL with a coefficient of determination R² greater than 0.9810. The method comparison results suggest that the established analytical method is simple in pre-treatment, easy to automate, and has excellent sensitivity to meet the analytical requirements of complex samples.

An effervescence-assisted dispersive liquid-liquid microextraction based on three-component deep eutectic solvent for the determination of fluoroquinolones in foods

An effervescence-assisted dispersive liquid-liquid microextraction approach using three-component deep eutectic solvent based on short-chain and medium-chain carboxylic acids and terpenoid was developed for the first time. The microextraction procedure was applied to the determination of fluoroquinolone antibiotics in foods (milk and shrimp samples) by high-performance liquid chromatography with fluorometric detection. In this microextraction procedure three-component deep eutectic solvent acted as a proton donor agent and an extractant. The carbon dioxide bubbles caused by the fast reaction between precursor of deep eutectic solvent (short-chain carboxylic acid) and effervescent agent (sodium carbonate) promoted the dispersion of the extractant in an aqueous sample phase. Various carboxylic acids were studied as hydrogen bond donors for the formation of deep eutectic solvents and proton donor agents for the generation of CO₂ bubbles. Two natural terpenoids (menthol and thymol) were studied as the hydrogen bond acceptors for the formation of three-component solvent. The extraction system based on heptanoic acid and thymol (1:2, mol/mol) containing formic acid (proton donor for generating CO₂ bubbles) provided maximum extraction recovery (86-99%) and a higher extraction efficiency of analytes compared to their extraction into individual hydrophobic precursors of the system. The LODs, calculated from the blank tests based on 3σ, were varied from 0.03 to 0.06 μg L^-1 and from 0.3 to 0.6 μg kg^-1 for fluoroquinolone antibiotics in milk and shrimp samples, respectively. The proposed approach provided effective dispersion of extractant speeding up the extraction process and fast separation of phases without any external energy assistance.

Switchable-hydrophilicity solvent-based liquid-phase microextraction in an on-line system: Cobalt determination in food and water samples

An on-line system employing switchable-hydrophilicity solvent-based liquid-phase microextraction (SHS-LPME) is described in this work. The method is based on the preconcentration of the species formed between cobalt and the reagent 1-nitroso-2-naphthol (NN), with subsequent detection by digital image colorimetry. The system's operation begins with the on-line mixture of sample, switchable solvent, and an alkaline agent in a reaction coil. Then the mixture is transported to an extraction chamber. The introduction of a proton donor leads to the passage of the solvent to its hydrophobic form, which allows phase separation. The rich phase is then directed to a glass tube, where detection is performed. Octanoic acid, sodium carbonate, and sulfuric acid were used as the extraction solvent, the alkaline agent, and the proton donor, respectively. Under optimized conditions, the method presented a detection limit of 0.8 μg L^-1 and an enrichment factor of 41. The precision obtained was 4.8% (20 μg L^-1). The accuracy of the method was tested by the analysis of Tomato Leaves certified reference material (NIST 1573a). The method was applied to the determination of cobalt in food, dietary supplements, and water samples. The method is presented as a green alternative and very accessible to the determination of cobalt in the analyzed samples.

Beta-Cyclodextrin-Decorated Magnetic Activated Carbon as a Sorbent for Extraction and Enrichment of Steroid Hormones (Estrone, β-Estradiol, Hydrocortisone and Progesterone) for Liquid Chromatographic Analysis

A β-cyclodextrin-decorated magnetic activated carbon adsorbent was prepared and characterized using various analytical techniques (X-ray diffraction (XRD), scanning electron microscopy–electron diffraction spectroscopy (SEM-EDS) and transmission electron microscopy (TEM)), and the adsorbent was used in the development of a magnetic solid-phase microextraction (MSPE) method for the preconcentration of estrone, β-estradiol, hydrocortisone and progesterone in wastewater and river water samples. This method was optimized using the central composite design in order to determine the experimental parameters affecting the extraction procedure. The quantification of hormones was achieved using high-performance liquid chromatography equipped with a photodiode array detector (HPLC-DAD). Under optimum conditions, the linearity ranged from 0.04 to 300 µg L⁻¹ with a correlation of determinations of 0.9969–0.9991. The limits of detection and quantification were between 0.01–0.03 and 0.033–0.1 µg L⁻¹, with intraday and interday precisions at 1.1–3.4 and 3.2–4.2. The equilibrium data were best described by the Langmuir isotherm model, and high adsorption capacities (217–294 mg g⁻¹) were obtained. The developed procedure demonstrated high potential as an effective technique for use in wastewater samples without significant interferences, and the adsorbent could be reused up to eight times.

Development of effervescence-assisted switchable-polarity solvent homogeneous liquid-phase microextraction for the determination of permethrin and deltamethrin in water samples prior to GC-FID

An effervescent tablet-assisted switchable polarity solvent-based homogeneous liquid-phase microextraction (ETA-SPS-HLPME) combined with gas chromatography with flame ionization detection has been conducted for the separation, preconcentration, and detection of permethrin and deltamethrin in the river water specimens. The triethylamine (TEA) was utilized as a switchable polarity solvent in this method. The switching process was carried out by the dissolution of an effervescent tablet including an effervescency agent (sodium carbonate) and a proton donor agent (citric acid). Changing the pH of the specimen solution enhanced the conversion of TEA into protonated triethylamine carbonate (P-TEA-C) through the tablet that generated carbon dioxide (CO₂ ) bubbles in situ. Finally, the addition of sodium hydroxide changed the ionization state of TEA and separated two phases. Influential factors in extraction were investigated. According to optimal situations, the limits of detection (LOD) and the limits of quantification (LOQ) were obtained 0.16 and 0.5 μgL^-1 for permethrin and 0.03 and 0.1 μgL^-1 for deltamethrin respectively. The preconcentration factor (PF) was achieved 194 in river water samples and interday and intraday precision (RSD % n = 5) was <5%. The extraction recovery was obtained in the range of 93.0-97% for permethrin and deltamethrin in water samples.

Hydrophobicity-switchable deep eutectic solvent-based effervescence-assisted dispersive liquid-liquid microextraction with solidification of floating droplets for HPLC determination of anthraquinones in fried Cassiae semen tea infusions

In this paper, a hydrophobicity-switchable deep eutectic solvent was evaluated for the first time as an efficient extractant in the effervescence-assisted dispersive liquid-liquid microextraction method combined with the solidification of floating droplets for HPLC determination of anthraquinones in fried Cassiae semen tea infusions. Prepared from choline chloride and octanoic acid, the deep eutectic solvent could be switched between hydrophobic and hydrophilic forms by pH adjustment. The dispersion of the extractant was assisted by in situ CO₂ produced from the effervescence reaction between H₂SO₄ and Na₂CO₃ without using any organic solvent or auxiliary equipment. Owing to the low melting/freezing point and low density compared with water, the extractant was solidified in an ice bath for the convenience of complete separation with the sample matrix. Some important parameters, such as species, molar ratio and volume of deep eutectic solvent, species and volume of effervescent agents were optimized to achieve the best extraction efficiency. Under the optimal conditions, extraction recoveries were obtained for four anthraquinones in the range of 91.1% to 111.9%. Relative standard deviations for intraday and interday precision were less than 3.3% and 4.0%, respectively. Greenness assessment demonstrated that the proposed method was greener than other reported methods for the determination of anthraquinones.

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

An Effective Acid-Base-Induced Liquid-Liquid Microextraction Based on Deep Eutectic Solvents for Determination of Testosterone and Methyltestosterone in Milk

An environmentally friendly method for the determination of testosterone and methyltestosterone by acid-base-induced deep eutectic solvents liquid-liquid microextraction (DES-ABLLME) combining with high-performance liquid chromatography was established. The deep eutectic solvent (DES) consisting of menthol:lauric acid:decanoic acid (3:1:1) can act as both hydrogen bond donor and hydrogen bond acceptor. In this approach, ammonia solution (NH3•H2O) is used as an emulsifier to react with DESs in the extraction process to generate salt and form milky white solution, achieving high extraction efficiency. Hydrochloric acid was used as a phase separator to change the emulsification state and promote the separation of extraction agent from water phase. A series of parameters were optimized including the volume of DES and the emulsifying agent, glucose concentration as well as hydrochloric acid volume. The method was linear in the range 0.5-100 μg mL-1 with a correlation coefficient (R) of 0.9999, and the limits of detection were 0.067 and 0.2 μg mL-1 for testosterone and methyltestosterone, respectively. This method was applied to analyze testosterone and methyltestosterone in milk samples, and the recoveries were between 89.2 and 108.2%.

Digital image colorimetry detection of carbaryl in food samples based on liquid phase microextraction coupled with a microfluidic thread-based analytical device

This research used a digital image colorimetry (DIC) method to detect carbaryl in food samples using effervescence-assisted liquid phase microextraction based on solidification of switchable hydrophilicity solvent combined with a microfluidic thread-based analytical device (EA-LPME-SSHS-μTAD). 1-naphthol, the hydrolysate of carbaryl, was extracted into octanoic acid by the adjustment of pH values of the sample solution and separated through solidification in an ice bath. Then 1-naphthol contained in the extracted solution was coupled with 4-methoxybenzenediazonlum tetrafluoroborate (MBDF) fixed on the μTAD to produce tangerine compounds. The inherent colour variation was captured by a smartphone and processed to calculate the intensity (I). Under the optimal conditions, the limit of quantification was within 0.020-0.027 mg kg^-1. The recovery was varied in the range from 92.3% to 105.9% with a relative standard deviation (RSD) below 5%. The developed method provides an alternative strategy to extract and detect pesticides for food samples.

Organic Analysis of Environmental Samples Using Liquid Chromatography with Diode Array and Fluorescence Detectors: An Overview

This overview is focused to provide an useful guide of the families of organic pollutants that can be determined by liquid chromatography operating in reverse phase and ultraviolet/fluorescence detection. Eight families have been classified as the main groups to be considered: carbonyls, carboxyls, aromatics, phenols, phthalates, isocyanates, pesticides and emerging. The references have been selected based on analytical methods used in the environmental field, including both the well-established procedures and those more recently developed.