Effect of sodium chloride on the interactions of ciprofloxacin hydrochloride with sodium dodecyl sulfate and hexadecyl trimethylammonium bromide: Conductometric and spectroscopic approach

Photophysical Response of Propranolol in Biomimetic Micellar Media of Alkyltrimethylammonium Bromide Surfactants: Effect of pH and Alkyl Chain Length

The photophysical behavior of a β-blocker drug propranolol (PPL) in micellar environments, formed by alkyltrimethylammonium bromide surfactants viz.; Cetyltrimethylammonium bromide (CTAB), Tetradecyltrimethylammonium bromide (TTAB), and Dodecyltrimethylammonium bromide (DTAB), has been investigated through fluorescence and UV-visible spectroscopic techniques at pH levels of 3.5, 7.4, and 10.4. The impact of pH on the critical micelle concentration (cmc) and micropolarity of micelles were assessed using pyrene as a photophysical probe. The cmc values were found to be lower at pH 10.4 compared to pH 7.4 and pH 3.5. Fluorescence emission intensities of PPL at 323 nm, 338 nm, and 352 nm were significantly influenced by pH, hydrophobic alkyl chain length of surfactants, and their concentrations. Quenching experiments with Cetylpyridinium chloride (CpCl) indicated the localization of charged and uncharged forms of PPL within micelles, with quenching constant (Ksv) values dependent on alkyl chain length and pH. At pH < pKa, PPL is positioned near the Stern layer, whereas at pH 10.4, its naphthalene moiety resides near the hydrophobic micellar core. UV spectroscopy showed that the charged form of PPL interacted with micelles only above cmc, while the neutral form interacted even below the cmc. Density Functional Theory (DFT) reveals the HOMO of the surfactants to be localized on the hydrocarbon chains, and the LUMO localized around the quaternary ammonium unit. Upon complexation with PPL, both HOMO and LUMO shifted to the drug, thereby decreasing energy levels. The findings are explained based on weak noncovalent interactions, further supported and analyzed through Reduced Density Gradient (RDG) and Noncovalent Interaction (NCI) methods, confirming synergistic non-covalent interactions in surfactant-PPL complexes.

A Pseudo-Surfactant Chemical Permeation Enhancer to Treat Otitis Media via Sustained Transtympanic Delivery of Antibiotics

Chemical permeation enhancers (CPEs) represent a prevalent and safe strategy to enable noninvasive drug delivery across skin-like biological barriers such as the tympanic membrane (TM). While most existing CPEs interact strongly with the lipid bilayers in the stratum corneum to create defects as diffusion paths, their interactions with the delivery system, such as polymers forming a hydrogel, can compromise gelation, formulation stability, and drug diffusion. To overcome this challenge, differing interactions between CPEs and the hydrogel system are explored, especially those with sodium dodecyl sulfate (SDS), an ionic surfactant and a common CPE, and those with methyl laurate (ML), a nonionic counterpart with a similar length alkyl chain. Notably, the use of ML effectively decouples permeation enhancement from gelation, enabling sustained delivery across TMs to treat acute otitis media (AOM), which is not possible with the use of SDS. Ciprofloxacin and ML are shown to form a pseudo-surfactant that significantly boosts transtympanic permeation. The middle ear ciprofloxacin concentration is increased by 70-fold in vivo in a chinchilla AOM model, yielding superior efficacy and biocompatibility than the previous highest-performing formulation. Beyond improved efficacy and biocompatibility, this single-CPE formulation significantly accelerates its progression toward clinical deployment.

Highly Selective Methodology for Entrapment and Subsequent Removal of Cobalt (II) Ions under Optimized Conditions by Micellar-Enhanced Ultrafiltration

Micellar-enhanced ultrafiltration (MEUF), being a separation technique, was used to remove cobalt metal ion (Co²⁺) from their aqueous solutions in an application to reduce the toxicity level from industrial effluents using a micellar solution of anionic and cationic surfactants. The metal ions were first adsorbed by using anionic surfactants, i.e., sodium dodecyl sulfate (SDS) and sodium oleate (SO). The calculations for partition (K_x) and binding constants (K_b) and their respective free energy of partition and binding (ΔG_p and ΔG_b kJmol^-1) helped significantly to find out the extent of binding or interaction of Co²⁺ with the surfactant and ΔG_p and ΔG_b were found to be -29.50 and -19.38 kJmol^-1 for SDS and -23.95 and -12.67 kJmol^-1 in the case of SO. MEUF work was also performed to find out the optimal conditions to remove metal pollutants from the aqueous system. For the said purpose, various factors and concentrations effect were studied, such as the concentration of the surfactant, concentration of the electrolyte (NaCl), transmembrane pressure, RPM, and pH. The efficiency of this process was checked by calculating various parameters, such as rejection percentage (R%) and permeate flux (J). A maximum rejection of 99.95% with SDS and 99.99% with SO was attained.

Effect of drug aceclofenac on physicochemical properties of mixed micellar systems

Abstract

In this article, the effect of the drug aceclofenac (ACF) on the properties of three mixed micellar systems are studied. The three systems were pluronic L64 + F127 (nonionic-nonionic), pluronic L64 + CTAB (cetyltrimethyl ammonium bromide), (nonionic-cationic) and L64 + SDS (Sodium dodecyl sulphate), (nonionic-anionic) combinations. The physicochemical parameters were characterized by different techniques such as UV visible spectroscopy, FTIR, conductance, DLS, and SEM. The presence of ACF affected the nonionic-ionic mixed micelles more than the nonionic-nonionic group as evidenced by UV spectroscopy. From the DLS measurement, it was observed that ACF enhanced the size of the single micelle of pluronic L64 from 98 to 168 nm. The size of the cationic mixed micelle with ACF displayed 329 nm and the anionic mixed one showed 291 nm suggesting enhanced entrapment efficiency of their mixed micelle compared to the single micelles. The size was also reconfirmed by SEM analysis. From the conductivity measurements of the two nonionic-ionic micellar systems, the counter ion binding constant β, and the thermodynamic parameters ΔG, ΔH, and ΔS were determined. The negative value of ΔG infers spontaneous binding between ACF and ionic mixed micelles.

Article highlights

Electrostatic molecular effect of differently charged surfactants on the solubilization capacity and physicochemical properties of salt-caged nanosuspensions containing pH-dependent and poorly water-soluble rebamipide

In this study, the electrostatic molecular effect of differently charged surfactants on the solubilization capacity and physicochemical properties of salt-caged nanosuspensions (NSPs) containing poorly water-soluble drug was investigated. Anionic rebamipide (RBM) was chosen as a model drug because of its poor water solubility in low pH condition and ionizable acidic forms. Negatively charged sodium lauryl sulfate (SLS) and positively charged cetyltrimethylammonium bromide (CTAB) were selected as surfactants for the preparation of NSPs or in the dissolution medium. Salt-caged NSPs surrounded by NaCl were prepared by the HCl-NaOH neutralization method in the presence of poloxamer 407. Interestingly, the addition of positively charged CTAB in the preparation process or the dissolution media could interfere with the solubilization capacity of salt-caged NSPs containing a negatively charged drug via intermolecular electrostatic attraction. In the presence of positively charged CTAB, the salt-caged NSP was disordered in structure via electrostatic attractive interaction with partially ionizable anionic RBM resulting in changes in the physicochemical properties of the salt-caged NSP such as low drug content, increased particle size, decreased dissolution rate, and the formation of water-insoluble precipitates with rough and irregular crystals. This inhibitory effect of CTAB on the dissolution rate of pure RBM and the salt-caged NSP in pH 6.8 intestinal fluid was pronounced in a concentration-dependent manner mainly owing to the formation of precipitates, so-called poorly soluble complexes. When the salt-caged NSP (F1) was dissolved in DW containing CTAB, the dissolution rate decreased more significantly, dissolving less than 20% within 2 h. Depending on the surfactant charges, the charge density and the initial potential were varied during the dissolution of NSPs in deionized water (DW). In contrast, the negatively charged SLS did not significantly change the physicochemical properties of the salt-caged NSP. For example, the dissolution rate of the salt-caged NSP containing SLS in DW or pH 1.2 gastric fluid remained over 90% for 2 h. Surfactants for the formulation or dissolution media should be chosen carefully because of their effect on the physicochemical properties and solubilization capacity of salt-caged NSPs containing poorly water-soluble and ionizable drugs via electrostatic molecular interactions.

Interaction of cationic surfactant with acid yellow dye in absence/presence of organic and inorganic additives: conductivity and dye solubilization methods

In the present study, the conductometric and dye-solubilization techniques have been utilized to investigate the interaction between an anionic dye (acid yellow 23 [AY]) and a cationic surfactant (cetyltrimethylammonium bromide [CTAB]) in presence of organic (ethanol)/inorganic (NaCl) additives. From the conductometric method, two critical micelle concentrations (cmc) were found for AY + CTAB mixture in an aqueous system and the cmc values were found to undergo a change with the variation of AY concentrations. The cmc values of AY + CTAB systems were observed higher in the alcoholic medium, while the same was found to be lower in the NaCl solutions. The change in cmc of AY + CTAB systems shows an U-like curve with an increase of temperature. The negative free energy of micellization ( Δ G m o ${\Delta}{G}_{m}^{o}$ ) for the AY + CTAB systems has indicated a spontaneous micelle formation in all of the cases studied. The enthalpy ( Δ H m o ${\Delta}{H}_{m}^{o}$ ), as well as the entropy of micellization ( Δ S m o ${\Delta}{S}_{m}^{o}$ ) for the AY + CTAB systems, were assessed and discussed with proper reasoning. Additionally, the enthalpy-entropy compensation parameters were also investigated and illustrated. The solubility of AY and C D was observed to rise linearly with an increase in the concentration of CTAB/NaCl solution. The solubilization capacity (χ) of AY, the molar partition coefficient (K M) amongst the micellar and the aqueous phase, and free energy of solubilization ( Δ G S o ${\Delta}{G}_{S}^{o}$ ) were evaluated and discussed in detail. The former parameters undergo an increase with an increase of NaCl concentrations.

Magnetic proline-based ionic liquid surfactant as a nano-carrier for hydrophobic drug delivery

Biofriendly and magnetic proline based ionic liquid surfactant demonstrated for drug delivery system.

Adsorption of Fluoroquinolone Antibiotics at the Gas-Liquid Interface Using Ionic Surfactants

The overuse of antibiotics in today's society has resulted in high concentrations of pharmaceutical contaminants in the natural environment. In this work, we investigated the surfactant-mediated adsorption of fluoroquinolone (FQ) antibiotics at the gas-liquid interface and their separation using a semi-batch foam fractionation process. FQs being a zwitterionic compound have an affinity to bind with both cationic and anionic surfactants. The adsorption of FQs to the gas-liquid interface was investigated using a cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS) surfactant. Ciprofloxacin (CF) was chosen as a model FQ antibiotic. The adsorption properties of the surfactant systems and CF were characterized using pendant-drop tensiometry and surface excess analysis. It was found that CF partitions to the gas-liquid interface more readily in the presence of SDS compared to CTAB. This was also corroborated in the foam fractionation experiments. At optimum operating conditions, CF showed a higher removal efficiency with SDS (96.3%) compared to CTAB (52%). In spite of strong molecular interactions between CTAB and CF, the preferential adsorption of DS^--CF complexes was far greater than CTA⁺-CF complexes. At optimized operating conditions, using SDS as the surfactant, other FQs such as norfloxacin, levofloxacin, and ofloxacin were recovered up to 97.9, 91.7, and 96.7%, respectively, with effluent concentration less than 100 nM. Overall, the work demonstrates foam fractionation as a novel and environment-friendly gas-liquid separation technique for the targeted removal of FQ antibiotics from waterbodies.