Preparation of some compounds and study their thermal stability for use in dye sensitized solar cells

Charge Transfer Complex of Lorlatinib with Chloranilic Acid: Characterization and Application to the Development of a Novel 96-Microwell Spectrophotometric Assay with High Throughput

Lorlatinib (LRL) is the first drug of the third generation of anaplastic lymphoma kinase (ALK) inhibitors used a first-line treatment of non-small cell lung cancer (NSCLC). This study describes, for the first time, the investigations for the formation of a charge transfer complex (CTC) between LRL, as electron donor, with chloranilic acid (CLA), as a π-electron acceptor. The CTC was characterized by ultraviolet (UV)-visible spectrophotometry and computational calculations. The UV-visible spectrophotometry ascertained the formation of the CTC in methanol via formation of a new broad absorption band with maximum absorption peak (λmax) at 530 nm. The molar absorptivity (ε) of the complex was 0.55 × 10³ L mol^-1 cm^-1 and its band gap energy was 2.3465 eV. The stoichiometric ratio of LRL/CLA was found to be 1:2. The association constant of the complex was 0.40 × 10³ L mol^-1, and its standard free energy was -0.15 × 10² J mole^-1. The computational calculation for the atomic charges of an energy minimized LRL molecule was conducted, the sites of interaction on the LRL molecule were assigned, and the mechanism of the reaction was postulated. The reaction was adopted as a basis for developing a novel 96-microwell spectrophotometric method (MW-SPA) for LRL. The assay limits of detection and quantitation were 2.1 and 6.5 µg/well, respectively. The assay was validated, and all validation parameters were acceptable. The assay was implemented successfully with great precision and accuracy to the determination of LRL in its bulk form and pharmaceutical formulation (tablets). This assay is simple, economic, and more importantly has a high-throughput property. Therefore, the assay can be valuable for routine in quality control laboratories for analysis of LRL's bulk form and pharmaceutical tablets.

Charge-transfer chemistry of two corticosteroids used adjunctively to treat COVID-19. Part II: The CT reaction of hydrocortisone and dexamethasone donors with TCNQ and fluoranil acceptors in five organic solvents

Hydrocortisone (termed as D1) and dexamethasone (termed as D2) are corticosteroids currently used to treat COVID-19. COVID-19 is a disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Exploring additional chemical properties of drugs used in the treatment protocols for COVID-19 could help scientists alike improve these treatment protocols and potentially even the vaccines (i.e., Janssen, Moderna, AstraZeneca, Pfizer-BioNTech). In this work, the charge-transfer (CT) properties of these two corticosteroids (D1 and D2) with two universal acceptors: 7,8,8-tetracyanoquinodimethane (termed as TCNQ) and fluoranil (termed as TFQ) in five different solvents were investigated. The examined solvents were MeOH, EtOH, MeCN, CH₂Cl₂, and CHCl₃. The CT interactions formed stable corticosteroid CT complexes in all examined solvents. Several spectroscopic parameters were derived, and the oscillator strength (f) and transition dipole moment (μ_e.g.) values revealed that the interaction between the investigated corticosteroids with TCNQ acceptor is much stronger than their interaction with TFQ acceptor. The CT interactions were proposed to process via n → π* transition.

Synthesis, spectroscopic and computational characterization of charge transfer complex of remdesivir with chloranilic acid: Application to development of novel 96-microwell spectrophotometric assay

Remdesivir (REM) is an adenosine triphosphate analog antiviral drug that has received authorization from European Commission and approval from the U.S. Food and Drug Administration for treatment of coronavirus disease 2019 (Covid-19). This study, describes, for the first time, the synthesis of a novel charge transfer complex (CTC) between REM, as electron donor, with chloranilic acid (CLA), as π electron acceptor. The CTC was characterized using different spectroscopic and thermogravimetric techniques. UV-visible spectroscopy ascertained the formation of the CTC in methanol via formation of a new broad absorption band with maximum absorption peak (λ_max) at 530 nm. The molar absorptivity (ε) of the complex was 3.33 × 10³ L mol^-1 cm^-1 and its band gap energy was 1.91 eV. The stoichiometric ratio of REM:CLA was found to be 1:1. The association constant of the complex was 1.11 × 10⁹ L mol^-1, and its standard free energy was 5.16 × 10⁴ J mole^-1. Computational calculation for atomic charges of energy minimized REM was conducted, the site of interaction on REM molecule was assigned and the mechanism of the reaction was postulated. The solid-state CTC was further characterized by FT-IR and ¹H NMR spectroscopic techniques. Both FT-IR and ¹H NMR confirmed the formation of the CTC and its structure. The reaction was adopted as a basis for developing a novel 96-microwell spectrophotometric method (MW-SPA) for REM. The assay limits of detection and quantitation were 3.57 and 10.83 µg/well, respectively. The assay was validated, and all validation parameters were acceptable. The assay was implemented successfully with great precision and accuracy to the determination of REM in its bulk form and pharmaceutical formulation (injection). This assay is simple, economic, and more importantly, has high throughput property. Therefore, the assay can be valuable for routine in quality control laboratories for analysis of REM's bulk form and pharmaceutical injection.

Charge-transfer chemistry of two corticosteroids used adjunctively to treat COVID-19. Part I: Complexation of hydrocortisone and dexamethasone donors with DDQ acceptor in five organic solvents

COVID-19 is the disease caused by a novel coronavirus (CoV) named the severe acute respiratory syndrome coronavirus 2 (termed SARS coronavirus 2 or SARS-CoV-2). Since the first case reported in December 2019, infections caused by this novel virus have led to a continuous global pandemic that has placed an unprecedented burden on health, economic, and social systems worldwide. In response, multiple therapeutic options have been developed to stop this pandemic. One of these options is based on traditional corticosteroids, however, chemical modifications to enhance their efficacy remain largely unexplored. Obtaining additional insight into the chemical and physical properties of pharmacologically effective drugs used to combat COVID-19 will help physicians and researchers alike to improve current treatments and vaccines (i.e., Pfizer-BioNTech, AstraZeneca, Moderna, Janssen). Herein, we examined the charge-transfer properties of two corticosteroids used as adjunctive therapies in the treatment of COVID-19, hydrocortisone and dexamethasone, as donors with 2,3-dichloro-5,6-dicyano-p-benzoquinone as an acceptor in various solvents. We found that the examined donors reacted strongly with the acceptor in CH₂Cl₂ and CHCl₃ solvents to create stable compounds with novel clinical potential.

Synthesis, spectroscopic and computational studies on hydrogen bonded charge transfer complex of duvelisib with chloranilic acid: Application to development of novel 96-microwell spectrophotometric assay

Duvelisib (DUV) is a is a small-molecule with inhibitory action for phosphoinositide 3-kinase (PI3K). It has been recently approved for the effective treatment of chronic lymphocytic leukemia (CLL) and small lymphocytic lymphoma (SLL). Novel charge transfer complex (CTC) between DUV, as electron donor, with chloranilic acid (CLA), as π electron acceptor has been synthesized and characterized using different spectroscopic and thermogravimetric techniques. UV-visible spectroscopy ascertained the formation of the CTC in different solvents of varying polarity indexes and dielectric constants via formation of new broad absorption band with maximum absorption peak (λ_max) in the range of 488-532 nm. The molar absorptivity of the CTC was dependent on the polarity index and dielectric constant of the solvent; the correlation coefficients were 0.9955 and 0.9749, respectively. The stoichiometric ratio of DUV:CLA was 1:1. Electronic spectral analysis was conducted for characterization of the complex in terms of its electronic constants. Computational calculation for atomic charges of energy minimized DUV was conducted and the site of interaction on DUV molecule was assigned. The solid-state CTC of DUV:CLA (1:1) was synthesized, and its structure was characterized by UV-visible, mass, FT-IR, and ¹H NMR spectroscopic techniques. Both FT-IR and ¹H NMR confirmed that both CT and hydrogen bonding contributed to the molecular composition of the complex. The reaction was adopted as a basis for developing a novel 96-microwell spectrophotometric assay (MW-SPA) for DUV. The assay limits of detection and quantitation were 0.57 and 1.72 µg/well, respectively. The assay was validated and all validation parameters were acceptable. The method was implemented successfully with great precision and accuracy to the analysis of the DUV in its bulk and capsules.

Charge-transfer complexation of TCNE with azithromycin, the antibiotic used worldwide to treat the coronavirus disease (COVID-19). Part IV: A comparison between solid and liquid interactions

Finding a cure or vaccine for the coronavirus disease (COVID-19) is the most pressing issue facing the world in 2020 and 2021. One of the more promising current treatment protocols is based on the antibiotic azithromycin (AZM) alone or in combination with other drugs (e.g., chloroquine, hydroxychloroquine). We believe gaining new insight into the charge-transfer (CT) chemistry of this antibiotic will help researchers and physicians alike to improve these treatment protocols. Therefore, in this work, we examine the CT interaction between AZM (donor) and tetracyanoethylene (TCNE, acceptor) in either solid or liquid forms. We found that, for both phases of starting materials, AZM reacted strongly with TCNE to produce a colored, stable complex with 1:2 AZM to TCNE stoichiometry via a n → π* transition (AZM → TCNE). Even though both methodologies yielded the same product, we recommend the solid-solid interaction since it is more straightforward, environmentally friendly, and cost- and time-effective.

Preparation, spectroscopic, characterizations and biological studies of new charge transfer complexes formed between fluconazole drug with various acceptors

Charge transfer complexes developed during the interaction of Fluconazole drug (FLU) as an electron donor with different types of electron acceptors, including σ-type as iodine (I₂), and π-types as 2,3-dinitrosalsylic acid (HDNS), Tetracyanoethylene (TCNE) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). The formed complexes were characterized using various techniques as UV-Vis spectra, Thermal analyses, spectrophotometric measurements, ¹H NMR and FTIR Spectroscopy. It was found that the stoichiometry of all developed complexes was a 1:1 M ratio between fluconazole and acceptors (I₂, HDNS, TCNE and DDQ). The characteristic physical parameters data such as ionization potential (I_D), The oscillator strength (ƒ), formation constant (K_CT), transition dipole moment (μ), free energy (ΔG), and energy of interaction (E_CT) of the formed CT-complexes have also been reported. Eventually, the synthesized complexes were screened for their microbial and antioxidant activities.

Charge-transfer chemistry of azithromycin, the antibiotic used worldwide to treat the coronavirus disease (COVID-19). Part III: A green protocol for facile synthesis of complexes with TCNQ, DDQ, and TFQ acceptors

Investigating the chemical properties of molecules used to combat the COVID-19 pandemic is of vital and pressing importance. In continuation of works aimed to explore the charge-transfer chemistry of azithromycin, the antibiotic used worldwide to treat COVID-19, the disease resulting from infection with the novel SARS-CoV-2 virus, in this work, a highly efficient, simple, clean, and eco-friendly protocol was used for the facile synthesis of charge-transfer complexes (CTCs) containing azithromycin and three π-acceptors: 7,7,8,8-tetracyanoquinodimethane (TCNQ), 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), and tetrafluoro-1,4-benzoquinone (TFQ). This protocol involves grinding bulk azithromycin as the donor (D) with the investigated acceptors at a 1:1 M ratio at room temperature without any solvent. We found that this protocol is environmentally benign, avoids hazardous organic solvents, and generates the desired CTCs with excellent yield (92–95%) in a straightforward means.

Charge-Transfer Complex of Linifanib with 2,3-dichloro-3,5-dicyano-1,4-benzoquinone: Synthesis, Spectroscopic Characterization, Computational Molecular Modelling and Application in the Development of Novel 96-microwell Spectrophotometric Assay

Background

Linifanib (LFB) is a multi-targeted receptor tyrosine kinase inhibitor used in the treatment of hepatocellular carcinoma and other types of cancer. The charge-transfer (CT) interaction of LFB is important in studying its receptor binding mechanisms and useful in the development of a reliable CT-based spectrophotometric assay for LFB in its pharmaceutical formulation to assure its therapeutic benefits.

Purpose

The aim of this study was to investigate the CT reaction of LFB with 2,3-dichloro-3,5-dicyano-1,4-benzoquinone (DDQ) and its application in the development of a novel 96-microwell spectrophotometric assay for LFB.

Methods

The reaction was investigated, its conditions were optimized, the physicochemical and constants of the CT complex and stoichiometric ratio of the complex were determined. The solid-state LFB-DDQ complex was synthesized and its structure was analyzed by UV-visible, FT-IR, and ¹H-NMR spectroscopic techniques, and also by the computational molecular modeling. The reaction was employed in the development of a novel 96-microwell spectrophotometric assay for LFB.

Results

The reaction resulted in the formation of a red-colored product, and the spectrophotometric investigations confirmed that the reaction had a CT nature. The molar absorptivity of the complex was linearly correlated with the dielectric constant and polarity index of the solvent; the correlation coefficients were 0.9526 and 0.9459, respectively. The stoichiometric ratio of LFB:DDQ was 1:2. The spectroscopic and computational data confirmed the sites of interaction on the LFB molecule, and accordingly, the reaction mechanism was postulated. The reaction was utilized in the development of the first 96-microwell spectrophotometric assay for LFB. The assay limits of detection and quantitation were 1.31 and 3.96 μg/well, respectively. The assay was successfully applied to the analysis of LFB in its bulk and tablets with high accuracy and precision.

Conclusion

The assay is simple, rapid, accurate, eco-friendly as it consumes low volumes of organic solvent, and has high analysis throughput.

Charge-transfer chemistry of azithromycin, the antibiotic used worldwide to treat the coronavirus disease (COVID-19). Part II: Complexation with several π-acceptors (PA, CLA, CHL)

Finding a vaccine or cure for the coronavirus disease (COVID-19) responsible for the worldwide pandemic and its economic, medical, and psychological burdens is one of the most pressing issues presently facing the global community. One of the current treatment protocols involves the antibiotic azithromycin (AZM) alone or in combination with other compounds. Obtaining additional insight into the charge-transfer (CT) chemistry of this antibiotic could help researchers and clinicians to improve such treatment protocols. Toward this aim, we investigated the CT interactions between AZM and three π-acceptors: picric acid (PA), chloranilic acid (CLA), and chloranil (CHL) in MeOH solvent. AZM formed colored products at a 1:1 stoichiometry with the acceptors through intermolecular hydrogen bonding. An n → π* interaction was also proposed for the AZM-CHL CT product. The synthesized CT products had markedly different morphologies from the free reactants, exhibiting a semi-crystalline structure composed of spherical particles with diameters ranging from 50 to 90 nm.

Charge-transfer chemistry of azithromycin, the antibiotic used worldwide to treat the coronavirus disease (COVID-19). Part I: Complexation with iodine in different solvents

Around the world, the antibiotic azithromycin (AZM) is currently being used to treat the coronavirus disease (COVID-19) in conjunction with hydroxychloroquine or chloroquine. Investigating the chemical and physical properties of compounds used alone or in combination to combat the COVID-19 pandemic is of vital and pressing importance. The purpose of this study was to characterize the charge transfer (CT) complexation of AZM with iodine in four different solvents: CH2Cl2, CHCl3, CCl4, and C6H5Cl. AZM reacted with iodine at a 1:1 M ratio (AZM to I2) in the CHCl3 solvent and a 1:2 M ratio in the other three solvents, as evidenced by data obtained from an elemental analysis of the solid CT products and spectrophotometric titration and Job's continuous variation method for the soluble CT products. Data obtained from UV-visible and Raman spectroscopies indicated that AZM strongly interacted with iodine in the CH2Cl2, CCl4, and C6H5Cl solvents by a physically potent n→σ* interaction to produce a tri-iodide complex formulated as [AZM·I+]I3 -. XRD and TEM analyses revealed that, in all solvents, the AZM-I2 complex possessed an amorphous structure composed of spherical particles ranging from 80 to 110 nm that tended to aggregate into clusters. The findings described in the present study will hopefully contribute to optimizing the treatment protocols for COVID-19.

Design, Molecular Modeling and Synthesis of Metal-Free Sensitizers of Thieno Pyridine Dyes as Light-Harvesting Materials with Efficiency Improvement Using Plasmonic Nanoparticles

Considering the thiophene unit as an electron-rich heterocycle, it is investigated with the aim of elucidating its potential efficiency for solar cell application. With the introduction of active substituents such as COOEt, CONH₂ and CN into the thiophene segment, three novel thieno pyridine sensitizers (6a–c), based on donor-acceptor D-π-A construction, are designed and synthesized. The effect of the anchoring groups is investigated based on their molecular orbital’s (MO’s) energy gap (E_g). The electrostatic interaction between the synthesized dyes and metal nanoparticles, namely gold, silver and ruthenium, is believed to improve their performance as organic sensitizers. The dye-sensitized solar cells (DSSCs) are manufactured using the novel diazenyl pyridothiophene dyes, along with their metal nanoparticles conjugates as sensitizers, and were examined for efficiency improvement. Accordingly, using this modification, the photovoltaic performance was significantly improved. The promising results of conjugate (6b/AgNPs), compared with reported organic and natural sensitizers (J_SC (1.136 × 10⁻¹ mA/cm²), V_OC (0.436 V), FF (0.57) and η (2.82 × 10⁻²%)), are attributed to the good interaction between the amide, methyl, amino and cyano groups attached to the thiophene pyridyl scaffolds and the surface of TiO₂ porous film. Implementation of a molecular modeling study is performed to predict the ability of the thiophene moiety to be used in solar cell applications.

Electron-transfer complexation of morpholine donor molecule with some π – acceptors: Synthesis and spectroscopic characterizations

Morpholine is an interesting moiety that used widely in several organic syntheses. The intermolecular charge-transfer (CT) complexity associated between morpholine (Morp) donor with (monoiodobromide “IBr”, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone “DDQ”, 2,6-dichloroquinone-4-chloroimide “DCQ” and 2,6-dibromoquinone-4-chloroimide “DBQ”) π–acceptors have been spectrophotometrically investigated in CHCl3 and/or MeOH solvents. The structures of the intermolecular charge-transfer (CT) were elucidated by spectroscopic methods like, infrared spectroscopy. Also, different analyses techniques such as UV-Vis and elemental analyses were performed to characterize the four morpholine [(Morp)(IBr)], [(Morp)(DDQ)], [(Morp)(DCQ)] and [(Morp)(DBQ)] CT-complexes which reveals that the stoichiometry of the reactions is 1:1. The modified Benesi-Hildebrand equation was utilized to determine the physical spectroscopic parameters such as association constant (K) and the molar extinction coefficient (ε).

Measurements and correlations in solution-state for charge transfer products caused from the 1:2 complexation of TCNE acceptor with several important drugs

In our previous work, we highlighted the thermodynamic and spectroscopic characteristics of the 1:1 charge transfer (CT) complexation of TCNE acceptor with various medically important drugs. Continuing that work, we further examine drugs that react with the TCNE acceptor via a 1:2 interaction. The examined drugs are atenolol, quinidine, cimetidine, reserpine, and levofloxacin. We aimed through this study to: i) make the spectrophotometric and thermodynamic data of the examined drugs, both initially and when reacted via a 1:2 M ratio with the TCNE acceptor, available to use in the determination or detection of these drugs in pharmaceuticals and other environments; and ii) compare the mode of interactions and the spectrophotometric and thermodynamic properties between drugs that react via a 1:1 or 1:2 ratio with the TCNE acceptor. To achieve these aims, the five examined drugs were reacted with TCNE in acetonitrile (MeCN) solvent at room temperature. Several thermodynamic and spectroscopic data were experimentally estimated using the van't Hoff and the Benesi-Hildebrand equations and discussed.