Application of carbon quantum dots to increase the activity of conventional photocatalysts: A systematic review

Progress and obstacles in employing carbon quantum dots for sustainable wastewater treatment

We explored the potential of carbon quantum dots (CQDs) as novel materials for wastewater treatment and their role towards environmental sustainability. The advantages of CQDs over other carbon-based materials, when synthesized using the same precursor material and for the same contaminant are discussed, enabling future researchers to choose the appropriate material. CQDs have demonstrated exceptional adaptability in various wastewater treatment, acting as efficient adsorbents for contaminants, exhibiting excellent photocatalytic properties for degradation of organic pollutants, and functioning as highly sensitive sensors for water quality monitoring. We found that bottom-up approach has better control over particle size (resulting CQDs: 1-4 nm), whereas top-down synthesis approach (resulting CQDs: 2-10 nm) have more potential for large scale applications and tunability. Transmission electron microscopy (TEM) remains the most expensive characterization technique, which provides the best resolution of the CQD's surface. The study emphasizes on the environmental impact and safety considerations pertaining to CQDs by emphasizing the need for thorough toxicity evaluation, and necessary environmental precautions. The study also identifies the lacunae pertaining to critical challenges in practical implementation of CQDs, such as scalability, competition of co-existing contaminants, and stability. Finally, future research directions are proposed, advocating green synthesis approaches, tailored surface functionalization, and, lowering the overall cost for analysis, synthesis and application of CQDs.

Visible Light Enhancement of Biocarbon Quantum-Dot-Decorated TiO2 for Naphthalene Removal

In this study, carbon-quantum-dot (CQD)-decorated TiO2 was prepared using an ultrasonic doping method and applied in the photocatalytic degradation of naphthalene under sunlight irradiation. The CQDs were synthesized from a typical macroalgae via diluted sulfuric acid pretreatment and hydrothermal synthesis using an optimal design, i.e., 3 wt% and 200 °C, respectively. The CQD/TiO2 composite remarkably enhanced the photocatalytic activity. The degradation of naphthalene under a visible light environment indicated that there is a synergistic mechanism between the CQDs and TiO2, in which the generation of reactive oxygen species is significantly triggered; in addition, the N that originated from the macroalgae accelerated the photocatalytic efficiency. Kinetic analysis showed that the photocatalytic behavior of the CQD/TiO2 composite followed a pseudo-first-order equation. Consequently, our combined experimental approach not only provides a facile pretreatment process for bio-CQDs synthesis, but also delivers a suitable TiO2 photocatalyst for the visible environment along with critical insights into the development of harmful macroalgae resources.

Carbon dots as potential candidate for photocatalytic treatment of dye wastewater

Water is the utmost important element for the existence of life. In recent decades, water resources have become highly contaminated by a variety of pollutants, especially toxic dyes that are harmful to both living beings and environment. Hence, there is an urgent need to develop more effective methods than traditional wastewater treatment approaches for treatment of hazardous dyes. Herein, we have addressed the various aspects related to the effective and economically feasible method for photocatalytic degradation of these dyes employing carbon dots. The photocatalysts based on carbon dots including those mediated from biomass have many superiorities over conventional methods such as utilization of economically affordable, non-toxic, rapid reactions, and simple post-processing steps. The current study will also facilitate better insight into the understanding of photocatalytic treatment of dye-polluted wastewater for future wastewater treatment studies. Additionally, the possible mechanistic pathways of photocatalytic dye decontamination, several challenges, and future perspectives have also been summarized.

A photo-controlled fluorescent switching based on carbon dots and photochromic diarylethene for bioimaging

Carbon dots (CDs) as luminescent zero-dimensional carbon nanomaterials have good aqueous dissolution, photostability, high quantum yield, and tunability of emission color. It has great application potential in many fields, including bioimaging, labeling of biological species, drug delivery, and sensing in biomedical. However, controlling the fluorescence emission of carbon dots remains a formidable challenge. Herein, we designed and exploited a photo-controlled fluorescent switching based on photochromic diarylethene (DT) and CDs for bioimaging. It could be modulated reversibly between "ON" and "OFF" under UV/vis light exposure. The fluorescent modulation efficiency was as high as 95.3%. The fluorescent switching could be used to the bioimaging in HeLa cells with low cell toxicity. Therefore, this fluorescent switching could be a promising candidate in many potential application areas, especially in bioimaging.

An Insight into Carbon Nanomaterial-Based Photocatalytic Water Splitting for Green Hydrogen Production

At present, the energy shortage and environmental pollution are the burning global issues. For centuries, fossil fuels have been used to meet worldwide energy demand. However, thousands of tons of greenhouse gases are released into the atmosphere when fossil fuels are burned, contributing to global warming. Therefore, green energy must replace fossil fuels, and hydrogen is a prime choice. Photocatalytic water splitting (PWS) under solar irradiation could address energy and environmental problems. In the past decade, solar photocatalysts have been used to manufacture sustainable fuels. Scientists are working to synthesize a reliable, affordable, and light-efficient photocatalyst. Developing efficient photocatalysts for water redox reactions in suspension is a key to solar energy conversion. Semiconductor nanoparticles can be used as photocatalysts to accelerate redox reactions to generate chemical fuel or electricity. Carbon materials are substantial photocatalysts for total WS under solar irradiation due to their high activity, high stability, low cost, easy production, and structural diversity. Carbon-based materials such as graphene, graphene oxide, graphitic carbon nitride, fullerenes, carbon nanotubes, and carbon quantum dots can be used as semiconductors, photosensitizers, cocatalysts, and support materials. This review comprehensively explains how carbon-based composite materials function as photocatalytic semiconductors for hydrogen production, the water-splitting mechanism, and the chemistry of redox reactions. Also, how heteroatom doping, defects and surface functionalities, etc., can influence the efficiency of carbon photocatalysts in H2 production. The challenges faced in the PWS process and future prospects are briefly discussed.

Photocatalytic materials modified with carbon quantum dots for the degradation of organic pollutants under visible light: A review

In recent years, carbon quantum dots (CQDs) have received widespread attention owing to their non-toxicity, sustainability, excellent photostability, and intrinsic photoluminescence properties. In particular, CQDs have attracted considerable interest for visible-light-driven photocatalysis because of their excellent electron transfer characteristics and high light capture efficiency. Many studies have reported CQDs/photocatalyst composite systems constructed to make full use of the solar spectrum, improving the ability of photocatalytic materials to degrade organic pollutants. Here, we review the recent research on CQDs-based photocatalysts, and their ability to remove environmental pollutants, with a special emphasis on degradation mechanisms. Several improvements in the catalytic response of CQDs to visible light are also included. In addition, we discuss the aspects that should be considered to construct composite materials based on CQD characteristics and the potential applications of CQD-based photocatalysts for efficient utilization of visible light.

Degradation of cotton stalk lignin by carbon dots loaded copper oxide synergistic emulsion system

Based on the realization of efficient utilization of cotton stalk lignin, the degradation of cotton stalk lignin by a CDs/CuO synergistic emulsion system was investigated. Copper oxide (CuO) nanoparticles with monoclinic crystal structure were prepared and carbon dots (CDs) synthesized by microwave method was combined with CuO. Under visible light, water and n-butanol were used to construct a water-oil (W/O) emulsion reaction system to achieved depolymerisation of lignin into small molecule compounds. The involvement of hydrogen peroxide (H₂O₂) makes the degradation of lignin in this system even more effective. The final high value-added monophenolic compound of 57.70 mg g^-1was obtained, among which the most abundant were six monophenolic compounds such as vanillin, eugenol and vinyl guaiacol and so on. The results of GC-MS and FTIR characterization indicated that H-type monomers were the main products of lignin degradation in this system. The process conditions for lignin hydrogenolysis in this system were optimized and the best ratio of CDs/CuO was obtained by product analysis. There were characterized by SEM, TEM, XRD, XPS, FTIR, and US-vis. The results show that CDs/CuO aggregates into flower clusters, in which CDs are uniformly distributed on the surface of rhomboidal CuO monoliths. The analysis shows that the doping of CDs improves the absorption efficiency of CuO in the visible region, while reducing the complexation of CuO photogenerated electrons and holes, which achieves the purpose of improved photocatalytic activity of CuO.

State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications

Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.

Efficient eradication of antibiotic and dye by C-dots@zeolite nanocomposites: Performance evaluation, and degraded products analysis

Metronidazole (MET), a recalcitrant antibiotic from the nitro-imidazole family and commercially used Rhodamine B (RhB) dye, contributes a huge to water pollution, which needs to eliminate, preferably by photocatalytic degradation technique. The Cdots@zeolite (CDZ) nanocomposites with different weight ratios (1:1, 1:3, 1:5, 5:1, 1:7) were synthesized hydrothermally to degrade MET and RhB molecules. The CDZ composites were characterized by XRD, BET, EDS, and XPS technique which verifies the crystalline nature, incorporation of C-dots into zeolite frameworks with high surface area (∼187 m²/g). The morphology, d-spacing and lattice planes were analyzed by SEM images, HR-TEM and SAED analysis. The maximum degradation (∼79%) was achieved at an optimum catalyst dose of 0.2 g/L and pH 4 for MET and that of RhB was ∼90% at a catalyst dose of 0.4 g/L. The PZC (point of zero charge) value for CDZ composite was about pH 3.4, which justifies the maximum removal of MET at pH 4. The obtained rate constants 'k' were found to be 0.0081, 0.0041, and 0.0101 min^-1 in sun, UV, and visible light sources, respectively. The real industrial wastewater sample has been treated to give ∼68% of COD and ∼62% TOC removal. Moreover, the intermediates of plausible degradation pathways were identified by the m/z values obtained from GC-MS analysis.

Carbon-Based Nanocatalysts (CnCs) for Biomass Valorization and Hazardous Organics Remediation

The continuous increase of the demand in merchandise and fuels augments the need of modern approaches for the mass-production of renewable chemicals derived from abundant feedstocks, like biomass, as well as for the water and soil remediation pollution resulting from the anthropogenic discharge of organic compounds. Towards these directions and within the concept of circular (bio)economy, the development of efficient and sustainable catalytic processes is of paramount importance. Within this context, the design of novel catalysts play a key role, with carbon-based nanocatalysts (CnCs) representing one of the most promising class of materials. In this review, a wide range of CnCs utilized for biomass valorization towards valuable chemicals production, and for environmental remediation applications are summarized and discussed. Emphasis is given in particular on the catalytic production of 5-hydroxymethylfurfural (5-HMF) from cellulose or starch-rich food waste, the hydrogenolysis of lignin towards high bio-oil yields enriched predominately in alkyl and oxygenated phenolic monomers, the photocatalytic, sonocatalytic or sonophotocatalytic selective partial oxidation of 5-HMF to 2,5-diformylfuran (DFF) and the decomposition of organic pollutants in aqueous matrixes. The carbonaceous materials were utilized as stand-alone catalysts or as supports of (nano)metals are various types of activated micro/mesoporous carbons, graphene/graphite and the chemically modified counterparts like graphite oxide and reduced graphite oxide, carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and fullerenes.

Synthesis, properties and catalysis of quantum dots in C–C and C-heteroatom bond formations

Luminescent quantum dots (QDs) represent a new form of carbon nanomaterials which have gained widespread attention in recent years, especially in the area of chemical sensing, bioimaging, nanomedicine, solar cells, light-emitting diode (LED), and electrocatalysis. Their extremely small size renders some unusual properties such as quantum confinement effects, good surface binding properties, high surface‐to‐volume ratios, broad and intense absorption spectra in the visible region, optical and electronic properties different from those of bulk materials. Apart from, during the past few years, QDs offer new and versatile ways to serve as photocatalysts in organic synthesis. Quantum dots (QD) have band gaps that could be nicely controlled by a number of factors in a complicated way, mentioned in the article. Processing, structure, properties and applications are also reviewed for semiconducting quantum dots. Overall, this review aims to summarize the recent innovative applications of QD or its modified nanohybrid as efficient, robust, photoassisted redox catalysts in C–C and C-heteroatom bond forming reactions. The recent structural modifications of QD or its core structure in the development of new synthetic methodologies are also highlighted. Following a primer on the structure, properties, and bio-functionalization of QDs, herein selected examples of QD as a recoverable sustainable nanocatalyst in various green media are embodied for future reference.

Red Phosphorus: An Up-and-Coming Photocatalyst on the Horizon for Sustainable Energy Development and Environmental Remediation

Photocatalysis is a perennial solution that promises to resolve deep-rooted challenges related to environmental pollution and energy deficit through harvesting the inexhaustible and renewable solar energy. To date, a cornucopia of photocatalytic materials has been investigated with the research wave presently steered by the development of novel, affordable, and effective metal-free semiconductors with fascinating physicochemical and semiconducting characteristics. Coincidentally, the recently emerged red phosphorus (RP) semiconductor finds itself fitting perfectly into this category ascribed to its earth abundant, low-cost, and metal-free nature. More notably, the renowned red allotrope of the phosphorus family is spectacularly bestowed with strengthened optical absorption features, propitious electronic band configuration, and ease of functionalization and modification as well as high stability. Comprehensively detailing RP's roles and implications in photocatalysis, this review article will first include information on different RP allotropes and their chemical structures, followed by the meticulous scrutiny of their physicochemical and semiconducting properties such as electronic band structure, optical absorption features, and charge carrier dynamics. Besides that, state-of-the-art synthesis strategies for developing various RP allotropes and RP-based photocatalytic systems will also be outlined. In addition, modification or functionalization of RP with other semiconductors for promoting effective photocatalytic applications will be discussed to assess its versatility and feasibility as a high-performing photocatalytic system. Lastly, the challenges facing RP photocatalysts and future research directions will be included to propel the feasible development of RP-based systems with considerably augmented photocatalytic efficiency. This review article aspires to facilitate the rational development of multifunctional RP-based photocatalytic systems by widening the cognizance of rational engineering as well as to fine-tune the electronic, optical, and charge carrier properties of RP.

Selective detection of Cu2+ using nitrogen-doped carbon dots derived from humic acid and urea based on specific inner filter effect

A new kind of nitrogen-doped carbon dots (N-CDs) was synthesized via a simple hydrothermal strategy using humic acid as the carbon source and urea as the nitrogen source. The fluorescence intensity of as-prepared N-CDs was quenched significantly in presence of Cu²⁺ based on a specific inner filter effect, which could be utilized to construct a selective sensor for monitoring Cu²⁺ in aqueous samples. The sensor exhibited good linearity over the range of 0.1-2 μM, and high sensitivity with a detection limit of 25 nM. Under the optimal conditions, there was no significant interference by other metal ions such as Cd²⁺, Al³⁺, Cr³⁺, Fe³⁺, Pb²⁺, Na⁺, Ni⁺, Fe²⁺, Ba²⁺, Ca²⁺, Co²⁺, Mg²⁺, As³⁺, K⁺, Zn²⁺ for Cu²⁺ detecting except Hg²⁺.The interference of Hg²⁺ can be masked by addition of sodium chloride. The experimental results demonstrated that the prepared N-CDs owned strong fluorescence, high monodispersity, good stability and good water solubility, and the constructed sensor had many advances and great application prospect in environmental field.

Carbon dots for cancer nanomedicine: a bright future

Cancer remains one of the main causes of death in the world. Early diagnosis and effective cancer therapies are required to treat this pathology. Traditional therapeutic approaches are limited by lack of specificity and systemic toxicity. In this scenario, nanomaterials could overcome many limitations of conventional approaches by reducing side effects, increasing tumor accumulation and improving the efficacy of drugs. In the past few decades, carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and carbon dots) have attracted significant attention of researchers in various scientific fields including biomedicine due to their unique physical/chemical properties and biological compatibility and are among the most promising materials that have already changed and will keep changing human life. Recently, because of their functionalization and stability, carbon nanomaterials have been explored as a novel tool for the delivery of therapeutic cancer drugs. In this review, we present an overview of the development of carbon dot nanomaterials in the nanomedicine field by focusing on their synthesis, and structural and optical properties as well as their imaging, therapy and cargo delivery applications.

Fluorescent Carbon Dots as Biosensor, Green Reductant, and Biomarker

Carbon dots, the celebrated green material among the nanocarbon family, are blessed with several interesting features like biocompatibility, solubility, tunable luminescence, and so forth. Herein, carbon dots derived from Mint leaf extract (M-CDs) via a green method are exploited for versatile applications as a biosensor, reductant, and biomarker. M-CDs are applied for fluorimetric sensing of biologically relevant folic acid through quenching response originating from the inner filter effect, with a limit of detection of 280 nM. The carbon dots were highly selective toward folic acid in a collection of 16 biomolecules. The specificity of carbon dots toward folic acid is explained based on the interaction between the two. Along with sensing, herein, we project M-CDs as a green reducing agent by demonstrating the reduction of Fe(III) and noble metal nanoparticle synthesis from their salt solutions. The particles are found to be significantly non-cytotoxic, as evident from the MTT assay performed on primary H8 cells. The application of M-CDs in multicolor imaging is also illustrated using HeLa cells.

A sustainable green synthesis of functionalized biocompatible carbon quantum dots from Aloe barbadensis Miller and its multifunctional applications

Herein, we demonstrated a sustainable green approach for the preparation of fluorescent biocompatible carbon quantum dots by microwave-assisted reflux synthesis from Aloe barbadensis Miller (Aloe vera) extract. The Transmission Electron Microscopic images reveal that the as-prepared CQDs are spherical with less than 5 nm in size. The CQDs are amorphous, showed an excitation-independent behaviour, emitted blue fluorescence and have a fluorescence quantum yield of 31%. The presence of -OH groups contributed to the blue emission and helped CQDs to disperse uniformly in an aqueous solution. The prepared CQDs were employed as a photocatalyst for the environmental remediation to degrade the anionic dye, eosin yellow under visible light irradiation. The results showed that the CQDs exhibited excellent photocatalytic efficiency of 98.55% within 80 min and a 100% efficiency within 100 min. Further, the cytotoxic properties of as-prepared CQDs are investigated in the MCF-7 breast cancer cell line using MTT assay. The results demonstrated a notable reduction in cell viability in a dose-subjected manner, and the cell viability decreased to 50% (IC₅₀) at a concentration of 52.2 ± 1.35 μg/mL. Furthermore, cellular internalization of CQDs in breast cancer cells is studied. As expected, CQDs are found to internalize by the cancer cells with blue emission as revealed by fluorescence microscope. In the end, CQDs in human breast cancer cells demonstrate the anti-proliferative effect and are found to be an impressive fluorescent probe for live-cell imaging, paving a path for its potential biomedical applications.

The In Vivo, In Vitro and In Ovo Evaluation of Quantum Dots in Wound Healing: A Review

Wound is defined as primarily damaged or disruption of skin contributed to the loss of its microstructure stability and which undergoes complex wound healing process. However, there are tons of factors that could affect the wound healing process such as infection and slow angiogenesis. Involvement of nanotechnologies therapies in wound care research aims to facilitates this healing process. Quantum dots (QDs) are an advanced nanomaterial technology found to be useful in clinical and biomedical applications. This review has been carried out to provide a summary of the application of QDs in acute or chronic wound healing. A thorough searching was done via Web of Science and SCOPUS database to obtain relevant articles including the in vivo, in vitro and in ovo studies. The results demonstrated a similar effect of different types of QDs, or an improvement of QDs in wound healing, antibacterial and angiogenesis properties. This review demonstrated the effectiveness of QDs for the wound healing process mainly by their antibacterial activity. Uniquely, the antibacterial effect unraveled an increasing trend over time influenced by the various concentration of QDs. In conclusion, the application of QDs support the wound healing phases and proven to be effective in vivo, in vitro and in ovo. However, the future QDs work should focus on the molecular level for the details of cellular interactions and pathways.

Carbon-based sustainable nanomaterials for water treatment: State-of-art and future perspectives

The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.

N,Fe-Doped Carbon Dot Decorated Gear-Shaped WO3 for Highly Efficient UV-Vis-NIR-Driven Photocatalytic Performance

The development of efficient and non-toxic photocatalysts with a full spectrum response is a primary strategy in the area of photocatalytically mediated pollutant elimination. Herein, we report the preparation of novel nitrogen and iron co-doped carbon dots/gear-shaped WO3 (N,Fe-CDs/G-WO3) with significantly improved broad-spectrum utilization. Characterization results demonstrated that the gear-shaped G-WO3, decorated by N,Fe-CDs with excellent electron transfer/reservoir properties, possessed abundant oxygen vacancies, had large specific surface areas, had multiple light-reflections and had a narrow band gap. As a result, the N,Fe-CDs/G-WO3 composite exhibited excellent photocatalytic activity towards the degradation of water contaminants under full spectrum irradiation. For example, the photodegradative efficiencies of rhodamine B (RhB) reached 81.4%, 97.1%, and 75% in 2 h, under ultraviolet, visible, and near-infrared (UV, vis, and NIR) light irradiation, respectively. Moreover, the N,Fe-CDs/G-WO3 composite also exhibited an outstanding photocatalytic degradation efficiency for other dyes, pharmaceuticals, and personal care products (PPCPs) like methylene blue (MB), ciprofloxacin (CIP), tetracycline hydrochloride (TCH), and oxytetracycline (OTC) (91.1%, 70.5%, 54.5%, and 47.8% in 3 h, respectively). The radical trapping experiments indicated that h+ and ·OH were the main reactive oxidative species (ROS), and the conversion between Fe (III) and Fe (II) played a key role in the photocatalytic reactions. Such a N,Fe-CD decorated material with brilliant photocatalytic activity has tremendous potential for application in environmental remediation.

Polyethylene Glycol6000/carbon Nanodots as Fluorescent Bioimaging Agents

Photoluminescent nanomaterials have immense potential for use in biological systems due to their excellent fluorescent properties and small size. Traditional semiconductor quantum dots are heavy-metal-based and can be highly toxic to living organisms, besides their poor photostability and low biocompatibility. Nano-sized carbon quantum dots and their surface-modified counterparts have shown improved characteristics for imaging purposes. We used 1,3, 6-trinitropyrene (TNP) and polyethylene glycol6000 (PEG6000) in a hydrothermal method to prepare functional polyethylene glycol6000/carbon nanodots (PEG6000/CDs) and analyzed their potential in fluorescent staining of different types of bacteria. Our results demonstrated that PEG6000/CDs stained the cell pole and septa of gram-positive bacteria B. Subtilis and B. thuringiensis but not those of gram-negative bacteria. The optimal concentration of these composite nanodots was approximately 100 ppm and exposure times varied across different bacteria. The PEG6000/CD composite had better photostability and higher resistance to photobleaching than the commercially available FM4-64. They could emit two wavelengths (red and green) when exposed to two different wavelengths. Therefore, they may be applicable as bioimaging molecules. They can also be used for differentiating different types of bacteria owing to their ability to differentially stain gram-positive and gram-negative bacteria.

Multifaceted applications of green carbon dots synthesized from renewable sources

Fluorescent carbon dots (CDs) are an emerging class of nanomaterials in the carbon family. There are various inexpensive and renewable resources that can be used to synthesize green CDs, which have received immense attention from researchers because of their improved aqueous solubility, high biocompatibility, and eco-friendly nature compared with chemically derived CDs. Additional surface passivation is not required, as heteroatoms are present on the surface of green CDs in the form of amine, hydroxyl, carboxyl, or thiol functional groups, which can improve their physicochemical properties, quantum yield, and the probability of visible light absorption. Green CDs have potential applications in the fields of bioimaging, drug/gene delivery systems, catalysis, and sensing. Since their discovery, there have been several review articles that describe the synthesis of green CDs and some of their applications. However, there are no review articles describing the synthesis and complete applications of green CDs. Here, we provide detailed information regarding their synthesis and applications based on the available literature. In addition, we discuss some of the less explored applications of green CDs and the challenges that remain to be overcome.

Fenton-like removal of tetracycline from aqueous solution using iron-containing carbon dot nanocatalysts

Iron-containing carbon dot nano-catalysts were synthesized hydrothermally and the Fenton-like reaction catalysed by Fe/CD was able to efficiently remove tetracycline.

Facile synthesis of a novel nitrogen-doped carbon dot adorned zinc oxide composite for photodegradation of methylene blue

Nitrogen-doped carbon dot decorated zinc oxide nanoparticles were successfully fabricated by an economical wet-impregnation method and used as a photocatalyst for the degradation of aqueous methylene blue dye under UV-light at room temperature.

Carbon-Based Nanomaterials via Heterojunction Serving as Photocatalyst

Photocatalytic hydrogen production from water splitting is of auspicious possibility to resolve the energy shortage and environmental anxieties. In the past decade, the combination of different carbon-based allotropes with semiconductors of different structure and unique properties to construct heterojunction, which can improve the charge separation, light absorption, and steadiness, offer a promising way to achieve efficient photocatalyst. This review aims to provide an overview of the development for the carbon nanomaterials (CNMs)-based photocatalysts used for hydrogen production from water splitting and photocatalytic degradation of organic pollutants in waste water. The recent progress of CNMs-based heterojunction, including various composite with graphene, fullerene, carbon quantum dots (CQDs), and carbon nanotubes (CNTs) were highlighted. Furthermore, a typical model of CNMs-based Z-scheme heterojunction was also addressed. Finally, a promising perspective on the future development of CNMs-based photocatalysts have been discussed.

Rapid sonochemical water-based synthesis of functionalized zinc sulfide quantum dots: Study of capping agent effect on photocatalytic activity

This study presents a rapid water-based chemical precipitation method for synthesis of zinc sulfide (ZnS) quantum dots (QDs), under the ultrasonic radiation, using two capping agents; including 2-mercaptoethanol and l-cysteine. It is demonstrated that by applying ultrasonic radiation, the synthesis time can be significantly decreased. The effect of capping agent type on the color specifications (using colorimetry), absorption spectra (using ultraviolet-visible absorption spectroscopy) and ZnS structure (using X-ray diffraction) are investigated. The results of the research indicate that the as-synthesized QDs were cubic structures with dimensions less than 10 nm. After characterization, the QDs samples were performed as nano-scaled photoatalysts, through a UV-driven photodegradation process for the degradation of crystalline violet (CV) as a pollutant dye. Moreover, the present study assesses the effect of operating conditions including the pH of the dye solution, UV-irradiation time, ionic strength, type and dosage of nanophotocatalyst on degradation efficiency. Experimental results of the research demonstrate the QDs can be reused for at-least five times, without a significant decrease in their photocatalytic properties. The maximum photodegradation efficiency for the CV solution adjusted at pH 11, in the presence of a low amount of QDs (i.e. 5 mg) was observed after 90 min irradiation time. Finally, the probable mechanism and kinetics of degradation reaction are proposed in the study. From the kinetic data, the acceptable regression coefficient values (>0.98) for the pseudo first-order kinetic model was obtained for expression the present QD-based photodegradation approach.

Small molecules derived carbon dots: synthesis and applications in sensing, catalysis, imaging, and biomedicine

Carbon dots (CDs) are the new fellow of carbon family having a size less than 10 nm and attracted much attention of researchers since the last decade because of their unique characteristics, such as inexpensive and facile synthesis methods, easy surface modification, excellent photoluminescence, outstanding water solubility, and low toxicity. Due to these unique characteristics, CDs have been extensively applied in different kind of scientific disciplines. For example in the photocatalytic reactions, drug-gene delivery system, in vitro and in vivo bioimaging, chemical and biological sensing as well as photodynamic and photothermal therapies. Mainly two types of methods are available in the literature to synthesize CDs: the top-down approach, which refers to breaking down a more massive carbon structure into nanoscale particles; the bottom-up approach, which refers to the synthesis of CDs from smaller carbon units (small organic molecules). Many review articles are available in the literature regarding the synthesis and applications of CDs. However, there is no such review article describing the synthesis and complete application of CDs derived from small organic molecules together. In this review, we have summarized the progress of research on CDs regarding its synthesis from small organic molecules (bottom-up approach) via hydrothermal/solvothermal treatment, microwave irradiation, ultrasonic treatment, and thermal decomposition techniques as well as applications in the field of bioimaging, drug/gene delivery system, fluorescence-based sensing, photocatalytic reactions, photo-dynamic therapy (PDT) and photo-thermal (PTT) therapy based on the available literature. Finally, the challenges and future direction of CDs are discussed.

Functionalized Chitosan-Carbon Dots: A Fluorescent Probe for Detecting Trace Amount of Water in Organic Solvents

A novel nanoprobe was designed and synthesized by functionalizing chitosan-carbon dots (CDs) with a modified bipyridine-based heterocyclic molecule, 4-(pyridine-2-yl)-3H-pyrrolo[2,3-c]quinoline (PPQ), to detect trace amount of water via fluorescence methods. The functionalized CDs (PPQ-CDs) were thoroughly characterized using dynamic light scattering, UV-vis, X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and NMR techniques. The modified fluorescence intensity of PPQ-CDs was found to be an excellent indicator for water in organic solvents. The PPQ-CDs showed very weak fluorescence intensity in organic solvents due to a possible photoinduced electron transfer (PET) process between PPQ pyrrole nitrogen and acceptor groups of CDs. However, sequential addition of trace amount of water led to continuous enhancement in the fluorescence intensity for the PPQ-CD nanocomposites. The mechanism was proposed to follow suppression of the PET process due to the formation of "free-ions" by the proton transfer from the CD carboxyl group to pyrrole nitrogen through water bridging. The limit of water detection was determined to be 0.023% (v/v) in DMSO.

Recent advances in carbon quantum dot (CQD)-based two dimensional materials for photocatalytic applications

This review presents up-to-date research findings and critical insights on trending topics of pristine CQDs and CQDs-based 2D nanomaterial composites.