Organophosphate anion based low viscosity ionic liquids as oil-miscible additives for lubrication enhancement

Ionic Nitrogen-Doped Carbon Dots as Nonpolar Lubricant Additives at Low Effective Addition

The poor compatibility with nonpolar lubricant still hinders the application of carbon dots (CDs) in lubrication. In addition, research proves that the existence of ionic structure and active groups on CDs are conducive to their lubricity. In order to obtain the ionic structures and good oil compatibility synchronously, a kind of ionic nitrogen-doped CDs (NCDs) was synthesized via the alkylation of nitrogen in NCDs and anion exchange. The new material could exhibit good tribological performance as poly alpha olefins (PAO4) additives with low addition. Moreover, an ionic liquid, [N44HH][DEHP], with the same anion was chosen as a comparison to investigate the role of NCD cations. The surface analyses demonstrate that NCD cations and phosphate ester anions adsorb on the friction interface to play a synergistic lubrication role during the friction process, which could generate a superior carbon-based tribofilm.

Contamination Status of Novel Organophosphate Esters Derived from Organophosphite Antioxidants in Soil and the Effects on Soil Bacterial Communities

The contamination status of novel organophosphate esters (NOPEs) and their precursors organophosphite antioxidants (OPAs) and hydroxylated/diester transformation products (OH-OPEs/di-OPEs) in soils across a large-scale area in China were investigated. The total concentrations of the three test NOPEs in soil were 82.4-716 ng g-1, which were considerably higher than those of traditional OPEs (4.50-430 ng g-1), OPAs (n.d.-30.8 ng g-1), OH-OPEs (n.d.-0.49 ng g-1), and di-OPEs (0.57-21.1 ng g-1). One NOPE compound, i.e., tris(2,4-di-tert-butylphenyl) phosphate (AO168 = O) contributed over 65% of the concentrations of the studied OPE-associated contaminants. A 30-day soil incubation experiment was performed to confirm the influence of AO168 = O on soil bacterial communities. Specific genera belonging to Proteobacteria, such as Lysobacter and Ensifer, were enriched in AO168 = O-contaminated soils. Moreover, the ecological function of methylotrophy was observed to be significantly enhanced (t-test, p < 0.01) in soil treated with AO168 = O, while nitrogen fixation was significantly inhibited (t-test, p < 0.01). These findings comprehensively revealed the contamination status of OPE-associated contaminants in the soil environment and provided the first evidence of the effects of NOPEs on soil microbial communities.

Physical and chemical properties of binary mixtures of dibutylammonium-based ionic liquids and water

Ionic liquids are used in different processes owing to their low vapor pressure, large viscosity range, chemical and thermal stability, and superior conductance even without water. These features make them flexible and tunable, indicating their possible use as substitutes for commonly used compounds in many processes. The objective of this study was to evaluate the properties of aqueous binary solutions for three different ionic liquids (ILs): dibutylammonium acetate, dibutylammonium propanoate, and dibutylammonium butanoate. The measured properties were density, speed of sound, and conductivity, and their isentropic compressibility and thermal expansion coefficient were calculated based on these properties. The temperature range used for measurements was 293.15–323.15 K. Mathematical models were used for each ionic liquid + water mixture to fit the density and speed of sound data. The increase in the alkyl chain leads to a tendency to decrease the values of density, speed of sound, and conductivity of the solutions. However, decreasing the dilution in water, the density, the conductivity and the speed of sound initially increase and then decrease, exhibiting a maximum in the initial water concentration range which indicates the formation of aggregates. Critical micellar concentrations at 298 K were determined through conductivity data. Enhancing the temperature leads to a decrease on density and sound velocity.

Recycling of phosphorus-containing plastic based on the dual effects of switchable hydrophilicity solvents

Plastic waste has caused severe environmental problems. Some additives in plastics, like organophosphates, enter the environment with plastic waste, causing significant harm to plants and creatures. However, the primary method of recycling phosphorus-containing plastic, especially polycarbonate and acrylonitrile-butadiene-styrene copolymer (PC/ABS), is a mechanical method, which not only does not effectively separate plastics and organophosphates but also tends to cause polymer degradation during recycling. In order to overcome these problems, we proposed an efficient and sustainable approach to recycle of phosphorus-containing plastic. In this method, N, N-dimethylcyclohexylamine (DMCHA), a switchable hydrophilicity solvent (SHS), was used to react with and extract organophosphates in plastic, achieving the goal of complete separation of plastic and organophosphates. PC/ABS can be recovered by precipitation. Dissolved organophosphates can also be easily recovered due to the switching characteristics of SHS. Both of recovered materials were of high purity and were close to virgin materials. This technique is an easy and efficient approach to separate plastic and organophosphates, which has excellent application prospects in recycling phosphorus-containing plastic.

Colloidal stability mechanism of copper nanomaterials modified by bis(2-ethylhexyl) phosphate dispersed in polyalphaolefin oil as green nanolubricants

Nanomaterials stabilization in lube oils poses an acute challenge in nanolubricants/nanofluids formulation. This study aims to improve the dispersion stability of copper (Cu) nanomaterials in polyalphaolefin-6 (PAO6) oil to overcome the agglomeration/sedimentation problem. Here, we modified the surface of Cu nanomaterials using bis(2-ethylhexyl) phosphate (IL) to enhance the electrostatic repulsion force in Cu nanomaterials. We evaluated the dispersion behavior of Cu nanolubricants by visual observation, ultraviolet-visible spectroscopy, dynamic light scattering, and zeta potential measurements. Furthermore, we determined the rheological and thermo-oxidation behavior of Cu nanolubricants using Brookfield viscometer, thermogravimetric, and Fourier transform infrared. Our experiments showed that dispersion stability depends on Cu concentration and settling time. IL demonstrated effective miscibility when blended with PAO6 oil and displayed non-Newtonian behavior. The results suggest that Cu modified by IL provides superior dispersion in PAO6 oil without sedimentation for 60 days, compared to unmodified Cu. Moreover, the hydrodynamic diameter of the modified Cu did not exceed 240 nm even after 60 days of preparation. The excellent dispersion behavior can be ascribed to the domination of the electrostatic repulsion forces over the inter-nanomaterials van der Waals interactions, which is related to the formation of the electrical adsorption layer on the Cu surface. The obtained colloidal dispersions have the potential to be utilized as green nanolubricants for lubricating tribological systems.