Conductance and ionic association of selected imidazolium ionic liquids in various solvents: A review

New Local Composition Model for Correlating of the Molar Conductivity of Ionic Liquid-Solvent Systems over the Whole Concentration Range

Considering that traditional electrolyte models are limited to use in the solvent-rich region, the development of new models to describe the molar conductivity (Λm) over the whole concentration range of ionic liquid (IL)-solvent systems is a meaningful study. Based on the idea of local composition and the law of independent ion migration, a new model is proposed in this study and used to successfully correlate the relationship between Λm and composition over the whole concentration range for 18 IL-solvent systems with satisfactory fitting accuracy. Meanwhile, the electrical conductivity (κ) of the systems is estimated using the calculated Λm. Moreover, the strength of anion-cation, anion-solvent, and cation-solvent interactions in the systems is explored by the obtained energy parameters, and the effect of the solvent on the interactions is investigated. The proposed model provides a new method to accurately describe the conductivity property of IL-solvent systems over the whole concentration range.

Ionic liquids revolutionizing biomedicine: recent advances and emerging opportunities

Ionic liquids (ILs), due to their inherent structural tunability, outstanding miscibility behavior, and excellent electrochemical properties, have attracted significant research attention in the biomedical field. As the application of ILs in biomedicine is a rapidly emerging field, there is still a need for systematic analyses and summaries to further advance their development. This review presents a comprehensive survey on the utilization of ILs in the biomedical field. It specifically emphasizes the diverse structures and properties of ILs with their relevance in various biomedical applications. Subsequently, we summarize the mechanisms of ILs as potential drug candidates, exploring their effects on various organisms ranging from cell membranes to organelles, proteins, and nucleic acids. Furthermore, the application of ILs as extractants and catalysts in pharmaceutical engineering is introduced. In addition, we thoroughly review and analyze the applications of ILs in disease diagnosis and delivery systems. By offering an extensive analysis of recent research, our objective is to inspire new ideas and pathways for the design of innovative biomedical technologies based on ILs.

Stability of the Inclusion Complexes of Dodecanoic Acid with α-Cyclodextrin, β-Cyclodextrin and 2-HP-β-Cyclodextrin

In the presented work, the stability of the formation of inclusion complexes of dodecanoic acid (lauric acid) with three cyclodextrins, α-cyclodextrin, β-cyclodextrin and 2-HP-β-cyclodextrin, was analyzed from the point of view of the size of the cavity in cyclodextrins, their molar mass and the structure of the studied fatty acid. The measurements were made in a wide temperature range of 283.15–318.15K. The conductometric method was used for these studies. The results obtained allowed us to determine the value of the theoretical limiting molar conductivity (Λm0) of the studied complexes, the values of the inclusion complex formation constants (Kf) and the values of thermodynamic functions (ΔG0, ΔH0 and ΔS0) describing the complexation process in the studied temperature range.

Development and Challenges of Biphasic Membrane-Less Redox Batteries

Ion exchange membranes (IEMs) play important roles in energy generation and storage field, such as fuel cell, flow battery, however, a major barrier in the way of large-scale application is the high cost of membranes (e.g., Nafion membranes price generally exceeds USD$ 200 m-2 ). The membrane-less technology is one of the promising approaches to solve the problem and thus has attracted much attention and been explored in a variety of research paths. This review introduces one of the representative membrane-less battery types, Biphasic membrane-less redox batteries that eliminate the IEMs according to the principle of solvent immiscibility and realizes the phase splitting in a thermodynamically stable state. It is systematically classified and summarizes their performances as well as the problems they are suffering from, and then several effective solutions are proposed based on the modification of electrodes and electrolytes. Finally, special attention is given to the challenges and prospects of Biphasic membrane-less redox batteries, which could contribute to the development of membrane-less batteries.

Study on Extraction Performance of Vanadium (V) from Aqueous Solution by Octyl-Imidazole Ionic Liquids Extractants

It is worth it to explore the extraction performance for vanadium by the imidazole ionic liquids. The extraction of vanadium (V) was studied using [Omim]Cl, [Omim]Br, and [Omim][BF4] as extractants. The effects of various diluents, equilibrium time, extraction temperature, and anion species were investigated. The structure-activity relationship of vanadium and ILs was discussed by calculating the lattice energy of ILs based on the Glasser theory and the volume of anions. The results show that n-pentanol is the optimum diluent. Under the extraction conditions of an equilibrium time of 60 s and extraction temperature of 25 °C, the extraction rates of V (V) by [Omim]Cl, [Omim]Br, and [Omim][BF4] reached 97.93%, 96.59%, and 87.01%, respectively. Furthermore, based on the Glasser theory, the lattice energy of ionic liquids decreased in the order [Omim]Cl > [Omim]Br > [Omim]BF4. The volume of the anions increased in the order Cl− < Br− < BF4− < HVO42−. The extraction rate of V (V) depended on the size of the anions and the strength of the interaction between the anion and imidazolium cation. The results of counterevidence experiments verified the larger the anion volume, the easier it is to combine with cation in the organic phase, and the lattice energy of extracted compound is lower. The statistical analysis showed that the effect of the equilibrium time and temperature were not significant in the model, and the anions species showed a significant effect on the extraction efficiency of V (V).

Thermal Stability of Ionic Liquids: Current Status and Prospects for Future Development

Ionic liquids (ILs) are the safest solvent in various high-temperature applications due to their non-flammable properties. In order to obtain their thermal stability properties, thermogravimetric analysis (TGA) is extensively used to analyze the kinetics of the thermal decomposition process. This review summarizes the different kinetics analysis methods and finds the isoconversional methods are superior to the Arrhenius methods in calculating the activation energy, and two tools—the compensation effect and master plots—are suggested for the calculation of the pre-exponential factor. With both parameters, the maximum operating temperature (MOT) can be calculated to predict the thermal stability in long-term runnings. The collection of thermal stability data of ILs with divergent cations and anions shows the structure of cations such as alkyl side chains, functional groups, and alkyl substituents will affect the thermal stability, but their influence is less than that of anions. To develop ILs with superior thermal stability, dicationic ILs (DILs) are recommended, and typically, [C4(MIM)2][NTf2]2 has a decomposition temperature as high as 468.1 °C. For the convenience of application, thermal stability on the decomposition temperature and thermal decomposition activation energy of 130 ILs are summarized at the end of this manuscript.

Biological activity of quaternary ammonium salts and resistance of microorganisms to these compounds

Quaternary ammonium salts (QASs) are ubiquitous in nature, being found in organisms ranging from microorganisms to vertebrates (e.g., glycine betaine, carnitine) where they have important cellular functions. QASs are also obtained by chemical synthesis. These compounds, due to their diverse chemical structure (e.g. monomeric QAS or gemini) and their biological properties, are widely used in medicine (as disinfectants, drugs, and DNA carriers), industry, environmental protection and agriculture (as preservatives, biocides, herbicides and fungicides). Discussed chemical compounds reduce the adhesion of microorganisms to various biotic and abiotic surfaces and cause the eradication of biofilms produced by pathogenic microorganisms. The properties of these chemicals depend on their chemical structure (length of the alkyl chain, linker and counterion), which has a direct impact on the physicochemical and biological activity of these compounds. QASs by incorporation into the membranes, inhibit the activity of proteins (H⁺-ATPase) and disrupt the transport of substances to the cell. Moreover, in the presence of QASs, changes in lipid composition (qualitative and quantitative) of plasma membrane are observed. The widespread use of disinfectants in commercial products can induce resistance in microorganisms to these surfactants and even to antibiotics. In this article we discuss the biological activity of QASs as cationic surfactants against microorganisms and their resistance to these compounds.

Capillary zone electrophoresis of proteins applying ionic liquids for dynamic coating and as background electrolyte component

The use of ionic liquids in capillary electrophoresis, either as coating material or as components of the background electrolyte needs systematic standardization to set up optimal conditions. Excellent separation of the proteins was achieved using 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF4]) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) ionic liquids using the properly made ionic-liquid-water binary mixtures for the experiments. The binary mixture has a distinctly stable and well perceptible low pH, which depends on the concentration of the ionic liquid, and on the preparation time of the mixture. Optimal conditions for the electrophoretic separation were obtained upon a multivariate analysis of the experimental parameters (applied voltage, migration time, concentration, and type of the ionic liquid). The standardized condition provides a low electroendosmotic flow toward the anode, which, however, did not hinder the proteins to migrate toward the cathode. The migration of cytochrome c, lysozyme, myoglobin, trypsin, and apo-transferrin at a pH around 2, far below the isoelectric points of the proteins, showed RSD values of the migration times less than 7.5% and less than 6.5% when using [emim][BF4] or [bmim][BF4], respectively, either in run-to-run or day-to-day experiments. The determination of the extent of the EOF is not possible with the commonly used EOF markers, due to interaction with the ionic-liquid constituents. The interaction of the ionic liquids with the proteins influences the migration order in zone electrophoresis. This method has been applied successfully for the analyses of real biological samples such as proteins from egg whites and human tears.

Computational NMR Study of Ion Pairing of 1-Decyl-3-methyl-imidazolium Chloride in Molecular Solvents

The 1H NMR spectra of 10-5 mole fraction solutions of 1-decyl-3-methyl-imidazolium chloride ionic liquid in water, acetonitrile, and dichloromethane have been measured. The chemical shift of the proton at position 2 in the imidazolium ring of 1-decyl-3-methyl-imidazolium (H2) is rather different for all three samples, reflecting the shifting equilibrium between the contact pairs and free fully solvated ions. Classical molecular dynamics simulations of the 1-decyl-3-methyl-imidazolium chloride contact ion pair as well as of free ions in water, acetonitrile, and dichloromethane have been conducted, and the quantum mechanics/molecular mechanics methods have been applied to predict NMR chemical shifts for the H2 proton. The chemical shift of the H2 proton was found to be primarily modulated by hydrogen bonding with the chloride anion, while the influence of the solvents-though differing in polarity and capabilities for hydrogen bonding-is less important. By comparing experimental and computational results, we deduce that complete disruption of the ionic liquid into free ions takes place in an aqueous solution. Around 23% of contact ion pairs were found to persist in acetonitrile. Ion-pair breaking into free ions was predicted not to occur in dichloromethane.

Revisiting Ionic Liquid Structure-Property Relationship: A Critical Analysis

In the last few years, ionic liquids (ILs) have been the focus of extensive studies concerning the relationship between structure and properties and how this impacts their application. Despite a large number of studies, several topics remain controversial or not fully answered, such as: the existence of ion pairs, the concept of free volume and the effect of water and its implications in the modulation of ILs physicochemical properties. In this paper, we present a critical review of state-of-the-art literature regarding structure–property relationship of ILs, we re-examine analytical theories on the structure–property correlations and present new perspectives based on the existing data. The interrelation between transport properties (viscosity, diffusion, conductivity) of IL structure and free volume are analysed and discussed at a molecular level. In addition, we demonstrate how the analysis of microscopic features (particularly using NMR-derived data) can be used to explain and predict macroscopic properties, reaching new perspectives on the properties and application of ILs.

Ion Dissociation in Ionic Liquids and Ionic Liquid Solutions

The extent to which cations and anions in ionic liquids (ILs) and ionic liquid solutions are dissociated is of both fundamental scientific interest and practical importance because ion dissociation has been shown to impact viscosity, density, surface tension, volatility, solubility, chemical reactivity, and many other important chemical and physical properties. When mixed with solvents, ionic liquids provide the unique opportunity to investigate ion dissociation from infinite dilution in the solvent to a completely solvent-free state, even at ambient conditions. The most common way to estimate ion dissociation in ILs and IL solutions is by comparing the molar conductivity determined from ionic conductivity measurements such as electrochemical impedance spectroscopy (EIS) (which measure the movement of only the charged, i.e., dissociated, ions) with the molar conductivity calculated from ion diffusivities measured by pulse field gradient nuclear magnetic resonance spectroscopy (PFG-NMR, which gives movement of all of the ions). Because the NMR measurements are time-consuming, the number of ILs and IL solutions investigated by this method is relatively limited. We have shown that use of the Stokes-Einstein equation with estimates of the effective ion Stokes radii allows ion dissociation to be calculated from easily measured density, viscosity, and ionic conductivity data (ρ, η, λ), which is readily available in the literature for a much larger number of pure ILs and IL solutions. Therefore, in this review, we present values of ion dissociation for ILs and IL solutions (aqueous and nonaqueous) determined by both the traditional molar conductivity/PFG-NMR method and the ρ, η, λ method. We explore the effect of cation and anion alkyl chain length, structure, and interaction motifs of the cation and anion, temperature, and the strength of the solvent in IL solutions.

Experimental and Modeling of Conductivity for Electrolyte Solution Systems

Studying the concentration and temperature dependence of the conductivity of electrolyte solution is of great significance for the evaluation and improvement of the performance of the electrochemical system. In this paper, based on the influence of the number of free ions and ion mobility on the conductivity, a semiempirical conductivity model with five parameters was proposed to correlate the conductivity, concentration and temperature data of electrolyte solutions at medium and high concentrations. The conductivities of NaCl and CaCl₂ in propylene carbonate-H₂O binary solvents were measured at temperatures varying from 283.15 to 333.15 K. The validity of the model was verified by the experimental data of this paper and the conductivity, concentration, and temperature data of 28 electrolyte solution systems in the literature. The electrolyte solutions investigated in this paper included binary organic solvent systems, pure organic solvent systems, and aqueous solution systems. The results showed that the proposed model can fit the experimental data well for both pure solvent and mixed solvents systems, which is of great value to practical engineering applications.

Supercritical Fluids: A Promising Technique for Biomass Pretreatment and Fractionation

Lignocellulosic biomasses are primarily composed of cellulose, hemicelluloses and lignin and these biopolymers are bonded together in a heterogeneous matrix that is highly recalcitrant to chemical or biological conversion processes. Thus, an efficient pretreatment technique must be selected and applied to this type of biomass in order to facilitate its utilization in biorefineries. Classical pretreatment methods tend to operate under severe conditions, leading to sugar losses by dehydration and to the release of inhibitory compounds such as furfural (2-furaldehyde), 5-hydroxy-2-methylfurfural (5-HMF), and organic acids. By contrast, supercritical fluids can pretreat lignocellulosic materials under relatively mild pretreatment conditions, resulting in high sugar yields, low production of fermentation inhibitors and high susceptibilities to enzymatic hydrolysis while reducing the consumption of chemicals, including solvents, reagents, and catalysts. This work presents a review of biomass pretreatment technologies, aiming to deliver a state-of-art compilation of methods and results with emphasis on supercritical processes.