Graphene oxide dispersed supramolecular hydrogel capped benign green silver nanoparticles for anticancer, antimicrobial, cell attachment and intracellular imaging applications

Development of a novel self-healing Zn(II)-metallohydrogel with wide bandgap semiconducting properties for non-volatile memory device application

A rapid and effective strategy has been devised for the swift development of a Zn(II)-ion-based supramolecular metallohydrogel, termed Zn@PEH, using pentaethylenehexamine as a low molecular weight gelator. This process occurs in an aqueous medium at room temperature and atmospheric pressure. The mechanical strength of the synthesized Zn@PEH metallohydrogel has been assessed through rheological analysis, considering angular frequency and oscillator stress dependencies. Notably, the Zn@PEH metallohydrogel exhibits exceptional self-healing abilities and can bear substantial loads, which have been characterized through thixotropic analysis. Additionally, this metallohydrogel displays injectable properties. The structural arrangement resembling pebbles within the hierarchical network of the supramolecular Zn@PEH metallohydrogel has been explored using FESEM and TEM measurements. EDX elemental mapping has confirmed the primary chemical constituents of the metallohydrogel. The formation mechanism of the metallohydrogel has been analyzed via FT-IR spectroscopy. Furthermore, zinc(II) metallohydrogel (Zn@PEH)-based Schottky diode structure has been fabricated in a lateral metal-semiconductor-metal configuration and  it's charge transport behavior has also been studied. Notably, the zinc(II) metallohydrogel-based resistive random access memory (RRAM) device (Zn@PEH) demonstrates bipolar resistive switching behavior at room temperature. This RRAM device showcases remarkable switching endurance over 1000 consecutive cycles and a high ON/OFF ratio of approximately 270. Further, 2 × 2 crossbar array of the RRAM devices were designed to demonstrate OR and NOT logic circuit operations, which can be extended for performing higher order computing operations. These structures hold promise for applications in non-volatile memory design, neuromorphic and in-memory computing, flexible electronics, and optoelectronic devices due to their straightforward fabrication process, robust resistive switching behavior, and overall system stability.

Novel supramolecular luminescent metallogels containing Tb(iii) and Eu(iii) ions with benzene-1,3,5-tricarboxylic acid gelator: advancing semiconductor applications in microelectronic devices

A novel strategy was employed to create supramolecular metallogels incorporating Tb(iii) and Eu(iii) ions using benzene-1,3,5-tricarboxylic acid (TA) as a gelator in N,N-dimethylformamide (DMF). Rheological analysis demonstrated their mechanical robustness under varying stress levels and angular frequencies. FESEM imaging revealed a flake-like hierarchical network for Tb-TA and a rod-shaped architecture for Eu-TA. EDX analysis confirmed essential chemical constituents within the metallogels. FT-IR, PXRD, Raman spectroscopy, and thermogravimetric analysis assessed their gelation process and material properties, showing semiconducting characteristics, validated by optical band-gap measurements. Metal-semiconductor junction-based devices integrating Al metal with Tb(iii)- and Eu(iii)-metallogels exhibited non-linear charge transport akin to a Schottky diode, indicating potential for advanced electronic device development. Direct utilization of benzene-1,3,5-tricarboxylic acid and Tb(iii)/Eu(iii) sources underscores their suitability as semiconducting materials for device fabrication. This study explores the versatile applications of Tb-TA and Eu-TA metallogels, offering insights for material science researchers.

2D nanomaterial-based 3D network hydrogels for anti-infection therapy

Two-dimensional nanomaterials (2D NMs) refer to nanomaterials that possess a planar topography with a thickness of one or several atomic layers. Due to their large specific surface areas, atomic thickness, rough edges, and electron confinement in two dimensions, they have emerged as promising antimicrobial agents over antibiotics in combating bacterial infections. However, 2D NMs encounter issues such as low bio-safety, easy aggregation, and limited tissue penetration efficiency. To address these concerns, hydrogels with three-dimensional (3D) networks have been developed to encapsulate 2D NMs, aiming to enhance their biocompatibility, biodegradability, and ability to regulate and remodel the tissue microenvironment at the infected site. This review systematically summarizes the current studies on 2D NM-based antibacterial hydrogels with 3D network structures (named 2N3Hs). Firstly, we introduce the emerging types of 2N3Hs and describe their antibacterial actions. Subsequently, we discuss the applications of 2N3Hs in three biomedical fields, including wound dressing, cancer treatment, and bone regeneration. Finally, we conclude the review with current challenges and future developments for 2N3Hs, highlighting their potential as a promising choice for next-generation biomedical devices, particularly in the field of tissue engineering and regenerative medicine. This review aims to provide a comprehensive and panoramic overview of anti-infective 2N3Hs for various biomedical applications.

Microscopy based methods for characterization, drug delivery, and understanding the dynamics of nanoparticles

Nanomedicine is an emerging field that exploits nanotechnology for the development of novel therapeutic and diagnostic modalities. Researches are been focussed in nanoimaging to develop noninvasive, highly sensitive, and reliable tools for diagnosis and visualization in nanomedical field. The application of nanomedicine in healthcare requires in-depth understanding of their structural, physical and morphological properties, internalization inside living system, biodistribution and localization, stability, mode of action and possible toxic health effects. Microscopic techniques including fluorescence-based confocal laser scanning microscopy, super-resolution fluorescence microscopy and multiphoton microscopy; optical-based Raman microscopy, photoacoustic microscopy and optical coherence tomography; photothermal microscopy; electron microscopy (transmission electron microscope and scanning electron microscope); atomic force microscopy; X-ray microscopy and, correlative multimodal imaging are recognized as an indispensable tool in material research and aided in numerous discoveries. Microscopy holds great promise in detecting the fundamental structures of nanoparticles (NPs) that determines their performance and applications. Moreover, the intricate details that allows assessment of chemical composition, surface topology and interfacial properties, molecular, microstructure, and micromechanical properties are also elucidated. With plethora of applications, microscopy-based techniques have been used to characterize novel NPs alongwith their proficient designing and adoption of safe strategies to be exploited in nanomedicine. Consequently, microscopic techniques have been extensively used in the characterization of fabricated NPs, and their biomedical application in diagnostics and therapeutics. The present review provides an overview of the microscopy-based techniques for in vitro and in vivo application in nanomedical investigation alongwith their challenges and advancement to meet the limitations of conventional methods.

Concentration- and Solvent-Induced Chiral Tuning by Manipulating Non-Proteinogenic Amino Acids in Glycoconjugate Supra-Scaffolds: Interaction with Protein, and Streptomycin Delivery

We showed solvent- and concentration-triggered chiral tuning of the fibrous assemblies of two novel glycoconjugates Z-P(Gly)-Glu and Z-F(4-N)-Glu made by chemical attachment of Cbz-protected [short as Z)] non-proteinogenic amino acids L-phenylglycine [short as P(Gly)] and 4-Nitro-L-phenylalanine [short as F(4-N)] with D-glucosamine [short as Glu]. Both biomimetic gelators can form self-healing and shape-persistent gels with a very low critical gelator concentration in water as well as in various organic solvents, indicating they are ambidextrous supergelators. Detailed spectroscopic studies suggested β-sheet secondary structure formation during anisotropic self-aggregation of the gelators which resulted in the formation of hierarchical left-handed helical fibers in acetone with an interlayer spacing of 2.4 nm. After the physical characterization of the gels, serum protein interaction with the gelators was assessed, indicating they may be ideal for biomedical applications. Further, both gelators are benign, non-immunogenic, non-allergenic, and non-toxic in nature, which was confirmed by performing the blood parameters and liver function tests on Wister rats. Streptomycin-loaded hydrogels showed efficacious antibacterial activity in vitro and in vivo as well. Finally, cell attachment and biocompatibility of the hydrogels were demonstrated which opens a newer avenue for promising biomedical and therapeutic applications.

Two novel low molecular weight gelator-driven supramolecular metallogels efficient in antimicrobial activity applications

A remarkable ultrasonication technique was successfully employed to create two novel metallogels using citric acid as a low molecular weight gelator, in combination with cadmium(ii)-acetate and mercury(ii)-acetate dissolved in N,N-dimethyl formamide at room temperature and under ambient conditions. The mechanical properties of the resulting Cd(ii)- and Hg(ii)-metallogels were rigorously examined through rheological analyses, which revealed their robust mechanical stability under varying angular frequencies and shear strains. Detailed characterization of the chemical constituents within these metallogels was accomplished through EDX mapping experiments, while microstructural features were visualized using field emission scanning electron microscope (FESEM) images. Additionally, FT-IR spectroscopic analysis was employed to elucidate the metallogel formation mechanism. Significantly, the antimicrobial efficacy of these novel metallogels was assessed against a panel of bacteria, including Gram-positive strains such as Bacillus subtilis and Staphylococcus epidermidis, as well as Gram-negative species like Escherichia coli and Pseudomonas aeruginosa. The results demonstrated substantial antibacterial activity, highlighting the potential of Cd(ii) and Hg(ii)-based citric acid-mediated metallogels as effective agents against a broad spectrum of bacteria. In conclusion, this study provides a comprehensive exploration of the synthesis, characterization, and antimicrobial properties of Cd(ii) and Hg(ii)-based citric acid-mediated metallogels, shedding light on their promising applications in combating both Gram-positive and Gram-negative bacterial infections. These findings open up exciting prospects for the development of advanced materials with multifaceted industrial and biomedical uses.

Single-Step Synthesis of Ag Hexagonal Nanoplate-Decorated Reduced Graphene Oxide and Its Cytotoxicity Studies

Graphene-based Ag nanocomposites are of specific interest because of their unique properties and applications, especially in the field of cytotoxicity. However, developing a simple method to synthesize reduced graphene oxide (rGO)/silver hexagonal nanoplate (Ag HNPT) (rGO-Ag HNPT) nanocomposites with well-defined morphology has been believed to be a major challenge. In this work, a facile, robust, and single-step synthesis method was developed to prepare silver-graphene (rGO-Ag HNPT) nanocomposites with hexagonal-structured silver nanoplates without any templates. The primary characterizations of the synthesized nanocomposite were done using a UV-visible spectrophotometer, X-ray diffraction (XRD), and Raman spectroscopy. The formation of uniformed hexagonal-shaped Ag nanoplates was confirmed by high-resolution transmission electron microscopy (HR-TEM), and the elemental composition was confirmed using energy dispersive X-ray analysis (EDX). With SiHa cervical cancer cells, the short-term in vitro cytotoxicity of the as-synthesized rGO-Ag HNPTs was evaluated by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The anticancer response of the rGO-Ag HNPTs was investigated using an MTT assay.

Bisphosphonate-Modified Functional Supramolecular Hydrogel Promotes Periodontal Bone Regeneration by Osteoclast Inhibition

Regeneration of periodontal tissue remains a challenge. Under periodontitis, osteoclasts are overactivated and bone loss occurs. We incorporated sodium alendronate (Alen), a medication commonly used to treat osteoporosis, into a supramolecular hydrogel system in order to create a novel biomaterial that would promote periodontal bone regeneration by inhibiting osteoclast overactivation. The Nap-Gly-Phe-Phe (NapGFF) peptide chain was modified to synthesize the functional Nap-Alen gelator. Afterward, the Nap-Alen/HAP supramolecular hydrogel composite with a suitable hydroxyapatite (HAP) ratio was constructed, which has outstanding mechanical properties and 3D structure. In addition to its good biocompatibility, it can inhibit the proliferation of bone marrow-derived macrophages (BMDMs) and differentiation of osteoclasts. Due to the simultaneous introduction of porous HAP, the hydrogel with a nanofiber structure was formed into a 3D mesh-like sparse porous composite hydrogel. While enhancing the mechanical properties of the gel, the porous structure facilitated the attachment and migration of bone regeneration-related cells. Therefore, it can effectively promote the regeneration of periodontal bone. In the future, by modifying the biophysical properties and loading stem cells or cytokines, this supramolecular hydrogel composite constructed in this study may provide a new strategy for tissue regeneration engineering and provide a preliminary experimental basis for relevant clinical translational studies.

Green Biosynthesis, Antioxidant, Antibacterial, and Anticancer Activities of Silver Nanoparticles of Luffa acutangula Leaf Extract

Studies on green biosynthesis of newly engineered nanoparticles for their prominent medicinal applications are being the torch-bearing concerns of the state-of-the-art research strategies. In this concern, we have engineered the biosynthesized Luffa acutangula silver nanoparticles of flavonoid O-glycosides in the anisotropic form isolated from aqueous leave extracts of Luffa acutangula, a popular traditional and ayurvedic plant in south-east Asian countries. These were structurally confirmed by Ultraviolet-visible (UV-Vis), Fourier transform infrared spectroscopy accessed with attenuated total reflection (FTIR-ATR) spectral analyses followed by the scanning electron microscopic (SEM) and the X-ray diffraction (XRD) crystallographic studies and found them with the face-centered cubic (fcc) structure. Medicinally, we have explored their significant antioxidant (DPPH and ABTS assays), antibacterial (disc diffusion assay on E. coli, S. aureus, B. subtilis, S. fecilis, and S. boydii), and anticancer (MTT assay on MCF-7, MDA-MB-231, U87, and DBTRG cell lines) potentialities which augmented the present investigation. The molecular docking analysis of title compounds against 3NM8 (DPPH) and 1DNU (ABTS) proteins for antioxidant activity; 5FGK (Gram-Positive Bacteria) and 1AB4 (Gram-Negative Bacteria) proteins for antibacterial activity; and 4GBD (MCF-7), 5FI2 (MDA-MB-231), 1D5R (U87), and 5TIJ (DBTRG) proteins for anticancer activity has affirmed the promising ligand-protein binding interactions among the hydroxy groups of the title compounds and aspartic acid of the concerned enzymatic proteins. The binding energy varying from -9.1645 to -7.7955 for Cosmosioside (1, Apigenin-7-glucoside) and from -9.2690 to -7.8306 for Cynaroside (2, Luteolin-7-glucoside) implies the isolated compounds as potential bioactive compounds. In addition, the performed studies like QSAR, ADMET, bioactivity properties, drug scores, and toxicity risks confirmed them as potential drug candidates and aspartic acid receptor antagonists. This research auxiliary augmented the existing array of phytological nanomedicines with new drug candidates that are credible with multiple bioactivities.

Graphene Integrated Hydrogels Based Biomaterials in Photothermal Biomedicine

Recently, photothermal therapy (PTT) has emerged as one of the most promising biomedical strategies for different areas in the biomedical field owing to its superior advantages, such as being noninvasive, target-specific and having fewer side effects. Graphene-based hydrogels (GGels), which have excellent mechanical and optical properties, high light-to-heat conversion efficiency and good biocompatibility, have been intensively exploited as potential photothermal conversion materials. This comprehensive review summarizes the current development of graphene-integrated hydrogel composites and their application in photothermal biomedicine. The latest advances in the synthesis strategies, unique properties and potential applications of photothermal-responsive GGel nanocomposites in biomedical fields are introduced in detail. This review aims to provide a better understanding of the current progress in GGel material fabrication, photothermal properties and potential PTT-based biomedical applications, thereby aiding in more research efforts to facilitate the further advancement of photothermal biomedicine.

An acylhydrazone-based AIE organogel for the selective sensing of submicromolar level Al3+ and Al(iii)-based metallogel formation to detect oxalic acid

The compound L can be fluorescence-tunable depending on the water volume fraction and optically sense Al³⁺ without interference.

Time-dependent study of graphene oxide-trypsin adsorption interface and visualization of nano-protein corona

Understanding of interactions of nanomaterials with biomolecules (especially proteins) is of great importance to the area of nanobiotechnology. Graphene and its derivative such as graphene oxide (GO), are two-dimensional (2-D) nanomaterials with remarkable physical and chemical properties and have been broadly explored in biotechnology and biomedical application. Here, we have reported the nature of adsorption of trypsin on the GO surface, considering its biomedical implications. A simple incubation of trypsin on GO surface exhibits varying resistance to autolysis. The structural morphology of trypsin on the GO surface was studied by using atomic force microscopy (AFM), circular dichroism (CD), fluorescence, and total internal reflection fluorescence (TIRF) microscopies. Results suggest that the trypsin follows the Freundlich Isotherm. By the Langmuir model, the maximum adsorption capacity was found to be 100 mg/g. From protein assay results we have concluded that the native trypsin exhibits the highest catalytic efficiency (33.97*10⁴ L mol^-1 min^-1) in comparison to other Trp-GO constructs. We have further visualized morphological change on GO-trypsin interface throughout the adsorption process by taking samples at definite time intervals, which suggests that the interaction of trypsin with GO is an example of the soft corona. Our findings may be implicated in enzyme engineering as well as enzyme-based bio-sensing applications.

A Novel Synthesis of the Graphene Oxide-Silver (GO-Ag) Nanocomposite for Unique Physiochemical Applications

Graphene oxide-silver nanocomposite (GO-Ag) was fabricated via the sonochemical method, which shows unique physiochemical properties. Graphene oxide (GO) and silver nanoparticles (AgNPs) were synthesized by modified Hummer's and Chemical reduction methods, respectively. The synthesized nanocomposite was characterized using powder X-ray diffraction, Raman spectroscopy, and Fourier-transform infrared spectroscopy. The surface morphology of synthesized nanoparticles was studied using scanning electron microscopy and transmission electron microscopy. The thermoluminescence property of the nanocomposite was analyzed by irradiating the samples in gamma radiation at 1 kGy. Electrochemical reversibility of the GO-Ag nanocomposite was examined by cyclic voltammetry. The photocatalytic application of the nanocomposite was studied using degradation of methylene blue dye. Results reveal that doping of AgNPs on the GO surface not only improves its dye degradation property but also enhances its thermoluminescence property. This knowledge will be helpful in determining the antibacterial property of the GO-Ag nanocomposite in the future.

Fabrication of CS/GA/RGO/Pd composite hydrogels for highly efficient catalytic reduction of organic pollutants

In this study, natural polymer material chitosan (CS) and graphene oxide (GO) with large specific surface area were used to prepare a new CS/RGO-based composite hydrogel by using glutaraldehyde (GA) as cross-linking agent. In addition, a CS/GA/RGO/Pd composite hydrogel was prepared by loading palladium nanoparticles (Pd NPs). The morphologies and microstructures of the prepared hydrogels were characterized by SEM, TEM, XRD, TG, and BET. The catalytic performance of the CS/GA/RGO/Pd composite hydrogel was analyzed, and the experimental results showed that the CS/GA/RGO/Pd composite hydrogel had good catalytic performance for degradation of p-nitrophenol (4-NP) and o-nitroaniline (2-NA). Therefore, this study has potential application prospect in wastewater treatment and provides new information for composite hydrogel design.

New functional CS/GA/RGO/Pd composite hydrogels are prepared via a self-assembly process, demonstrating potential applications in catalysis as well as composite materials.

Effect of bovine serum albumin on tartrate-modified manganese ferrite nano hollow spheres: spectroscopic and toxicity study

The emerging category of magneto-fluorescent tartrate-modified MnFe₂O₄ nano hollow spheres (T-MnFe₂O₄ NHSs) can be considered as promising candidates for biomedical applications. The interaction of bovine serum albumin (BSA) with T-MnFe₂O₄ NHSs has been studied using several spectroscopic techniques, which suggest that the interaction occurs by an electrostatic mechanism. Furthermore, BSA enhances the charge transfer transition from the tartrate ligand to the metal ions along with the d-d transition of Fe³⁺ ions on NHSs surfaces at different pH. Very strong salt bridge formation occurs between the lysine of the BSA surface and the tartrate in basic medium (pH 10), followed by the acidic (pH 3) and neutral medium (pH 7), respectively. Systematic fluorescence microscopic analysis reveals that BSA significantly enhances the contrast of T-MnFe₂O₄ NHSs in UV and blue light excitation because of the extended charge transfer from BSA to T-MnFe₂O₄ NHSs. Our report demonstrates great potential in the field of nanotechnology and biomedical applications. In vitro toxicity analysis using RAW 264.7 celline and in vivo studies on Wister rats revealed that the T-MnFe₂O₄ NHSs are benign. Furthermore, T-MnFe₂O₄ NHSs also appear to be an antimicrobial agent. Therefore, T-MnFe₂O₄ NHSs can be explored for future therapeutic applications.