Polyamine-modified magnetic graphene oxide surface: Feasible adsorbent for removal of dyes

Gelatin aerogel with good mechanical properties and adjustable physical properties for boron adsorption from salt lake brines: An optimized process

A composite aerogel with good mechanical properties and adjustable physical properties was synthesized by a sol-gel technique on the base of gelatin for the boron adsorption from water solution. The adsorption key variables, for instance, initial boron concentration (C0) (900-1100 mg/L), the contact time (t) (8-9 h), and pH (9-11), were optimized using central composite design to obtain improved boron adsorption performance of epichlorohydrin-modified gelatin (EMG)/N-methyl-d-glutamine (NMDG) aerogel loaded with hydroxylated carbon nanotubes (EMG@NMDG). The adsorption followed the pseudo-second-order and Freundlich model. At pH of 10, C0 of 1000 mg/L and t of 10 h, the largest adsorbed amount of EMG@NMDG was 85.79 mg/g. Regeneration experiments were carried out by eluting the adsorbent using HCl. The analysis showed that the adsorption in actual brine was 62.65 mg/g. Therefore, the developed EMG@NMDG aerogel has potential value for the boron extraction from brine and wastewater.

Fabrication of magnetic chitosan-grafted salicylaldehyde/nanoclay for removal of azo dye: BBD optimization, characterization, and mechanistic study

Herein, a novel nanohybrid composite of magnetic chitosan-salicylaldehyde/nanoclay (MCH-SAL/NCLA) was hydrothermally synthesized for removal of azo dye (acid red 88, AR88) from simulated wastewater. Response surface methodology combined with the Box-Behnken design (RSM-BBD) was applied with 29 experiments to assess the impact of adsorption variables, that include A: % NCLA loading (0-50), B: MCH-SAL/NCLA dose (0.02-0.1 g/100 mL), C: pH (4-10), and time D: (10-90 min) on AR88 dye adsorption. The highest AR88 removal (75.16 %) as per desirability function was attained at the optimum conditions (NCLA loading = 41.8 %, dosage = 0.06 g/100 mL, solution pH = 4, and time = 86. 17 min). The kinetic and equilibrium adsorption results of AR88 by MCH-SAL/NCLA reveal that the process follows the pseudo-first-order and Temkin models. The MCH-SAL/NCLA composite has a maximum adsorption capacity (173.5 mg/g) with the AR88 dye. The adsorption of AR88 onto the MCH-SAL/NCLA surface is determined by a variety of processes, including electrostatic, hydrogen bonding, n-π, and n-π interactions. This research revealed that MCH-SAL/NCLA can be used as a versatile and efficient bio-adsorbent for azo dye removal from contaminated wastewater.

Functionalization of chitosan biopolymer with SiO2 nanoparticles and benzaldehyde via hydrothermal process for acid red 88 dye adsorption: Box-Behnken design optimization

An effective hydrothermally prepared chitosan-benzaldehyde/SiO2 adsorbent (CTA-BZA/SiO2) employed functionalization of a CTA biopolymer with SiO2 nanoparticles and BZA. CTA-BZA/SiO2 is an adsorbent that was utilized for the adsorption of an acidic dye (acid red 88, AR88) from synthetic wastewater. The fundamental adsorption variables (A: CTA-BZA/SiO2 dosage (0.02-0.1 g); B: pH (4-10); and C: duration (10-60)) were optimized via the Box-Behnken design (BBD). The Langmuir and Freundlich isotherms (coefficients of determination R2 = 0.99) agreed well with empirical data of AR88 adsorption by CTA-BZA/SiO2. The pseudo-first-order model showed reasonable agreement with the kinetic data of AR88 adsorption by CTA-BZA/SiO2. The maximal AR88 adsorption capacity (qmax) for CTA-BZA/SiO2 was identified to be 252.4 mg/g. The electrostatic attractions between both the positively charged CTA-BZA/SiO2 adsorbent and the AR88 anions, plus the n-π, π-π, and H-bond interactions contribute to the favourable adsorption process. This study reveals that CTA-BZA/SiO2 has the capacity to be a suitable adsorbent for the removal of a wider range of organic dyes from industrial effluents.

Adsorption of chloroquine, propranolol, and metformin in aqueous solutions using magnetic graphene oxide nanocomposite

The work proposes the application of a nanocomposite formed by graphene oxide and magnetite to remove chloroquine, propranolol, and metformin from water. Tests related to adsorption kinetics, equilibrium isotherms and adsorbent reuse were studied, and optimization parameters related to the initial pH of the solution and the adsorbent dosage were defined. For all pharmaceuticals, adsorption tests indicated that removal efficiency was independent of initial pH at adsorbent dosages of 0.4 g L-1 for chloroquine, 1.2 g L-1 for propranolol, and 1.6 g L-1 for metformin. Adsorption equilibrium was reached within the first few minutes, and the pseudo-second-order model represented the experimental data well. While the equilibrium data fit the Sips isotherm model at 298 K, the predicted maximum adsorption capacities for chloroquine, propranolol, and metformin were 44.01, 16.82, and 12.23 mg g-1, respectively. The magnetic nanocomposite can be reused for three consecutive cycles of adsorption-desorption for all pharmaceuticals, being a promising alternative for the removal of different classes of pharmaceuticals in water.

Effective mitigation of single-component and mixed textile dyes from aqueous media using recyclable graphene-based nanocomposite

The present study reported the synthesis and utilization of a graphene-based hybrid nanocomposite (MnFe₂O₄/G) to mitigate several synthetic dyes, including methylene blue, malachite green, crystal violet, and Rhodamine B. This adsorbent was structurally analyzed by several physicochemical techniques such as X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, Raman spectroscopy, N₂ adsorption-desorption isotherm measurement, point of zero charge, and Boehm titrations. BET surface area of MnFe₂O₄/G was measured at 382.98 m²/g, which was substantially higher than that of MnFe₂O₄. MnFe₂O₄/G possessed diverse surface chemistry properties with the presence of many functional groups such as carboxylic acid, phenolic, lactone, and basic groups. MnFe₂O₄/G was used to remove synthetic dyes in the aqueous media. The effect of many factors, e.g., concentration (5-50 mg/L), pH (4-10), dose (5-20 mg), and temperature (25-45 °C) on adsorption performance of MnFe₂O₄/G was conducted. Kinetic, isotherm, intraparticle, and thermodynamic models were adopted for investigating adsorption phenomenon of dyes on MnFe₂O₄/G. The maximum adsorption capacity of dyes over MnFe₂O₄/G was found as Rhodamine B (67.8 mg/g) < crystal violet (81.3 mg/g) < methylene blue (137.7 mg/g) < malachite green (394.5 mg/g). Some tests were performed to remove mixed dyes, and mixed dyes in the presence of antibiotics with total efficiencies of 65.8-87.9% after 120 min. Moreover, the major role of π-π stacking interaction was clarified to gain insight into the adsorption mechanism. MnFe₂O₄/G could recycle up to 4 cycles, which may be beneficial for further practical water treatment.

Magnetic Poly(glycidyl methacrylate) Microspheres with Grafted Polypyrrole Chains for the High-Capacity Adsorption of Congo Red Dye from Aqueous Solutions

In this study, novel magnetic poly(glycidyl methacrylate) (PGMA) microspheres with grafted polypyrrole chains (magnetic PGMA-g-PPy) were developed for the high-capacity adsorption of Congo red (CR) from aqueous solutions. The magnetic PGMA-g-PPy was synthesized by the typical dispersion polymerization method and the ring-opening reaction of epoxy groups, producing abundant hydroxyls for the grafting polymerization of pyrrole in the presence of FeCl3 as an oxidizing agent on the surface of the microspheres. The characterization results showed that magnetic PGMA-g-PPy was successfully fabricated. The adsorption equilibrium data of the adsorbents could be well fitted by the Langmuir isotherm model, showing a high maximum adsorption capacity of 502.5 mg/g for CR. The adsorption followed pseudo-second-order kinetics with a fast speed. The adsorbents had no leaching of Fe in the solution at pH 1.0–11.0 for 24 h. The adsorption process was strongly pH-dependent and weakly ionic-strength-dependent. Furthermore, the magnetic microspheres could be easily regenerated, rapidly separated from the solution, and reused for wastewater treatment. The results suggest that magnetic PGMA-g-PPy microspheres are a promising efficient adsorbent for the removal of CR from wastewater.

Charge-driven interaction for adsorptive removal of organic dyes using ionic liquid-modified graphene oxide

A facile approach is presented to synthesize the ionic liquid-grafted graphene oxide (GO-ImOH) for fast and efficient adsorptive removal of cationic dyes. A coupling reaction between the hydroxyl terminal of imidazolium ionic liquid and the carboxylic group of GO, yielded the GO-ImOH hybrid material. The higher surface negative charge (-32 mV) and excellent dispersibility make the GO-ImOH an efficient adsorbent for cationic dyes. The GO-ImOH showed excellent removal efficiency for methylene blue (cationic dye), whereas it could adsorb only 22% methyl orange (anionic dye). The GO-ImOH displayed significantly higher adsorptive removal capacity for cationic dye compared to that of GO adsorbent. The chemical and structural features of GO-ImOH and spectroscopic analyses (FTIR and Raman) of pristine and recovered GO-ImOH adsorbent suggested multiple adsorptive interaction pathways (electrostatic, π-cation, π-π interactions, and hydrogen linkages) between the GO-ImOH adsorbent and the dye molecules. The work paves a new direction for the development of ionic liquids-modified 2D nanomaterials for efficient and fast adsorptive removal of organic pollutants, where the adsorptive sites on the surface of 2D nanomaterials can be tuned by selecting the desired functionalities from a diversified library of cations and anions of ionic liquids.

Preparation and Characterization of New CrFeO3-Carbon Composite Using Environmentally Friendly Methods to Remove Organic Dye Pollutants from Aqueous Solutions

Globally, environmental pollution is an important issue. Various pollutants present in water resources, such as bacteria, heavy-metal ions, and organic pollutants, cause serious problems to the environment, animals, plants, and human health. Among the water resources, pollutants, dyestuff, which is discharged from dyeing, textile, and other industrial processes, is an important class of pollutants. Removing these dye pollutants from water resources and wastewater is vital and important due to their toxicity. In this work, a CrFeO3-carbon nanotube (CNT) adsorbent was synthesized using environmentally friendly methods. The synthesized CrFeO3-CNT adsorbent was characterized stoichiometrically, spectroscopically, and morphologically. The synthesized CrFeO3-CNT adsorbent was tested for the removal of two dyes: Methyl violet 2B (MV) and Azocarmine G2 (AC) from an aqueous solution. Crushing CrFeO3 composite with multi-walled fullerene CNT to prepare CrFeO3-CNT adsorbent improved the adsorption performance of free multi-walled fullerene CNT towards MV dye by 30% and towards AC dye by 33.3%.

Biochar produced from the co-pyrolysis of sewage sludge and waste tires for cadmium and tetracycline adsorption from water

Application of sewage sludge biochar as an adsorbent for pollutant removal has obtained special attention due to their low cost and surface functionality. In this research, sludge-tire composite biochar (STB) was successfully prepared through co-pyrolysis at 300, 500 and 700 °C, respectively. Cadmium (Cd) and tetracycline (TC) were selected as the target pollutant. The results indicated that STB has the highest surface area (49.71 m²/g), more inorganic minerals (Kaolinite) as well as relatively stable physicochemical properties with 10% tire particles (TP) at 700 °C. The adsorption results indicated that the pseudo-second-order equation and Langmuir isotherm model could better describe the adsorption of Cd²⁺ and TC by STB. The maximum adsorption capacity of Cd²⁺ and TC was 50.25 mg/g and 90.09 mg/g, respectively. The main mechanism of the adsorption process of STB for Cd mainly involves anion binding adsorption and ion exchange. The main mechanism of the adsorption process of STB for TC mainly involves complexation and cation exchange. The present study could set a scientific foundation for further research on the recycle of sewage sludge and tires.

Adsorption Performance for Reactive Blue 221 Dye of β-Chitosan/Polyamine Functionalized Graphene Oxide Hybrid Adsorbent with High Acid-Alkali Resistance Stability in Different Acid-Alkaline Environments

A hybrid material obtained by blending β-chitosan (CS) with triethylenetetramine-functionalized graphene oxide (TFGO) (CSGO), was used as an adsorbent for a reactive dye (C.I. Reactive Blue 221 Dye, RB221), and the adsorption and removal performances of unmodified CS and mix-modified CSGO were investigated and compared systematically at different pH values (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12). The adsorption capacities of CS and CSGO were 45.5 and 56.1 mg/g, respectively, at a pH of 2 and 5.4 and 37.2 mg/g, respectively, at a pH of 12. This indicates that TFGO was successfully introduced into CSGO, enabling π-π interactions and electrostatic attraction with the dye molecules. Additionally, benzene ring-shaped GO exhibited a high surface chemical stability, which was conducive to maintaining the stability of the acid and alkali resistance of the CSGO adsorbent. The RB221 adsorption performance of CS and CSGO at acidic condition (pH 3) and alkaline condition (pH 12) and different temperatures was investigated by calculating the adsorption kinetics and isotherms of adsorbents. Overall, the adsorption efficiency of CSGO was superior to that of CS; thus, CSGO is promising for the treatment of dye effluents in a wide pH range.