Graphene-based adsorbents for the separation of f-metals from waste solutions: A review

Co-transport of biochar nanoparticles (BC NPs) and rare earth elements (REEs) in water-saturated porous media: New insights into REE fractionation

The present study investigated the co-transport behavior of three REEs³⁺ (La³⁺, Gd³⁺, and Yb³⁺) with and without biochar nanoparticles (BC NPs) in water-saturated porous media. The presence of REEs³⁺ enhanced the retention of BC NPs in quartz sand (QS) due to decreased electrostatic repulsion between BC NPs and QS, enhanced aggregation of BC NPs, and the contribution of straining. The distribution coefficients (K_D) in packed columns in the co-transport of BC NPs and three REEs³⁺ were much smaller than in batch experiments due to the different hydrodynamic conditions. In addition, we, for the first time, found that REE fractionation in the solid-liquid phase occurred during the co-transport of REEs³⁺ in the presence and absence of BC NPs. Note that the REE fractionation during the co-transport, which is helpful for the tracing application during earth surface processes, was driven by the interaction of REEs³⁺ with QS and BC NPs. This study elucidates novel insights into the fate of BC NPs and REEs³⁺ in porous media and indicates that (i) mutual effects between BC NPs and REE³⁺ should be considered when BC was applied to REE contaminated aquatic and soil systems; and (ii) REE fractionation provides a useful tool for identifying the sources of coexisting substances.

Recovery of rare earth elements from mine wastewater using biosynthesized reduced graphene oxide

Recycling rare earth elements (REEs) from sources of secondary waste such as REEs mine wastewater has emerged as a sustainable approach with both waste reuse and wastewater processing. In this study, green reduced graphene oxide (G-rGO) was prepared utilizing green tea extract with the advantages of being environmentally friendly, sustainable, and low cost. To understand how G-rGO functions, it was compared to commercial reduced graphene oxide (rGO), and the efficiencies in adsorbing Y(III) were 91.6% and 11.9%, respectively. This indicated there is a synergistic adsorption between the capping layer of G-rGO and rGO alone. G-rGO and rGO were characterized before and after exposure to Y(III). This comparison indicated that Y(III) was adsorbed on the surface of G-rGO through complexation and electrostatic interaction. The adsorption kinetics best fit the pseudo-second-order model and the Langmuir model isotherm model, with adsorption capacities of 24.54 mg g^-1. A probable adsorption mechanism of Y(III) by G-rGO was proposed, involving electronic complexation, electrostatic adsorption and ion exchange. Furthermore, the adsorption efficiencies of G-rGO for Y(III), Ce(III) and Zn(II) in mine wastewater were 22.1%, 89.1% and 14.6%, respectively. These results demonstrate that G-rGO has great potential in the recovery of REEs from mine wastewater.

High-efficiency uranium extraction from seawater by low-cost natural protein hydrogel

Utilization of uranium resource in seawater are highly possible to meet the growth demands for the sustainable development of nuclear energy industry. Bio-adsorbents exhibit high performance in terms of adsorption selectivity, equilibrium speed, and environmental friendliness, while the high fabrication cost hinders their practical application. In this study, a low-cost soy protein isolate (SPI) is used to fabricate adsorbent named SPI hydrogel for uranium extraction. This is the first report on applying bio-adsorbents derived from low-cost natural proteins for uranium extraction. The SPI hydrogel showed high uranium adsorption capacity of 53.94 mg g^-1 in simulated nuclear wastewater and 5.29 mg g^-1 is achieved in natural seawater, which is higher than all currently available adsorbents based on non-modified natural biomolecules. The amino and oxygen-containing groups are identified as the functional groups for uranyl binding by providing four oxygen and two nitrogen atoms to form equatorial coordination with uranyl, which guarantees the high binding selectivity and affinity to uranyl ions. The low cost for accessing the raw material together with the environmental friendliness, high salt tolerance, high uranium adsorption ability, and high selectivity to uranium, make SPI hydrogel a promising adsorbent for uranium extraction from seawater and nuclear wastewater.

Efficient and selective adsorption of U(VI) by succinic acid modified iron oxide adsorbent

The iron oxide surface was modified with succinic acid moiety and the adsorbent obtained, Fe-SUC, was evaluated for the adsorption of U(VI) (Uranium (VI)) from aqueous solution. The Fe-SUC was characterized by FT-IR (Fourier Transform Infrared Spectroscopy), Raman spectroscopy, thermogravimetry, X-ray diffraction, SEM-EDX (Scanning Electron Microscope - Energy-dispersive X-ray Spectroscopy), and particle size analysis. The adsorption behavior of U(VI) on Fe-SUC was studied as a function of pH, contact time, and concentration of U(VI) in the aqueous phase. The adsorption of U(VI) increased with increase in the pH of aqueous phase, and the adsorption saturation occurred at pH = 6. The kinetic data obtained for the adsorption of U(VI) on Fe-SUC were modeled with the pseudo-first-order and pseudo-second-order rate models. Similarly, the U(VI) adsorption isotherm was fitted with Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich adsorption isotherm models. The Langmuir adsorption capacity of U(VI) on Fe-SUC was about ∼176 mg g−1. The selectivity of the adsorbent toward U(VI) was evaluated in the presence of several possible interfering ions. The adsorbed U(VI) was recovered by 0.5 M sodium carbonate solution and the spent adsorbent was tested for its reusability.

Biosorption and biomineralization of U(VI) by Kocuria rosea: Involvement of phosphorus and formation of U-P minerals

The biosorption and biomineralization behavior of U(VI) by Kocuria rosea with uranium resistance higher than other general microorganisms was investigated in this study. The results showed the obvious effects of initial U(VI) concentration, biomass, time, and especially pH, and presented that U(VI) was immobilized to K. rosea by physical and chemical action. The characterization results for the precipitation proved that U-P minerals with U(VI) (H₃OUO₂PO₄·3H₂O, H₂(UO₂)₂(PO₄)₂·8H₂O) or U(IV) (CaU(PO₄)₂) were dominant, and the crystallization level increased with time. In the process, the phosphorous containing groups, amino, hydroxyl and carboxyl groups played important roles in adsorption of U(VI), and the phosphate groups were crucial in immobilization of uranium, showing the importance of groups containing phosphorus in both biosorption and biomineralization processes. Our findings focus on the biosorption and biomineralization mechanism of U(VI) by K. rosea, emphasize the synergy of physical adsorption and chemical immobilization in the process and formation of U(VI)-P and U(IV)-P minerals, and highlight the significance of phosphorus involvement in the reaction.

Terephthalaldehyde-Phenolic Resins as a Solid-Phase Extraction System for the Recovery of Rare-Earth Elements

Rare-earth elements (REEs) are involved in most high technology devices and have become critical for many countries. The progress of processes for the extraction and recovery of REEs is therefore essential. Liquid–solid extraction methods are an attractive alternative to the conventional solvent extraction process used for the separation and/or purification of REEs. For this purpose, a solid-phase extraction system was investigated for the extraction and valorization of REEs. Ion-exchange resins were synthesized involving the condensation of terephthalaldehyde with resorcinol under alkaline conditions. The terephthalaldehyde, which is a non-hazardous aromatic dialdehyde, was used as an alternative to formaldehyde that is toxic and traditionally involved to prepare phenolic ion-exchange resins. The resulting formaldehyde-free resole-type phenolic resins were characterized and their ion-exchange capacity was investigated in regard to the extraction of rare-earth elements. We herein present a promising formaldehyde and phenol-free as a potential candidate for solid–liquid extraction REE with a capacity higher than 50 mg/g and the possibility to back-extract the REEs by a striping step using a 2 M HNO₃ solution.

Application of hybrid MOF composite in extraction of f-block elements: Experimental and computational investigation

An attempt was made to understand the sorption behaviour of UO₂²⁺, Th⁴⁺ and Eu³⁺ on novel hybrid metal-organic framework composites, FeBDC@CoBDC. The XRD pattern revealed the composite nature of the hybrid MOF materials, while FTIR and Raman spectroscopic analyses evidenced the presence of different functional moieties. The thermal stability of the hybrid MOF composites was investigated through thermogravimetric analysis. The sorption predominantly followed Langmuir isotherm with sorption capacity of 189 mg g^-1, 224 mg g^-1 and 205 mg g^-1 for UO₂²⁺, Th⁴⁺ and Eu³⁺ respectively. The sorption proceeded through chemisorption following pseudo 2^nd order rate kinetics. The processes were found to be thermodynamically favourable and endothermic in nature. However, they were entropically driven. Multiple contacts of complexing agents were necessary for quantitative elution of f-elements from loaded MOF. The MOF showed moderate stability towards radiation exposure. DFT calculation was used for the optimization of structures, estimation of bond length and estimation of binding energy. In hybrid MOF composites, the Fe atom was having six coordination with 4 O atoms of BDC moieties and 2 O atoms of -OH groups. The O atoms of BDC and -OH groups were coordinated to Eu, Th and U atoms during their sorption.

Density functional theory based studies on the adsorption of rare-earth ions from hydrated nitrate salt solutions on g-C3N4 monolayer surface

This article represents density functional theory (DFT) based comparative analysis on six trivalent rare-earth ions (RE³⁺; RE: Y, La, Ce, Sm, Eu and Gd) absorption, from the respective nitrate-hexahydrate salts, on graphitic carbon nitride (g-C₃N₄) 2D monolayer, and the photocatalytic properties of the RE³⁺ adsorbed g-C₃N₄ systems (g-C₃N₄/RE³⁺) based on the ground-state electronic structure calculations. Structure, stability and coordination chemistry of two configurations of each hydrated RE-salt system are discussed in detail. Both DFT (B3LYP/SDD) and semi-empirical (Sparkle/PM7) calculations identify the central N₆ vacancy of pristine g-C₃N₄ as the most suitable site for RE³⁺ adsorption. Bader's QTAIM, Mayer bond order and charge population analyses (ADCH, CHELPG and DDEC) are performed to describe the bond characteristics within the systems under study. Thermochemical calculations suggest that the adsorption process is thermodynamically more feasible for higher atomic number (Z) RE³⁺ [Sm³⁺, Eu³⁺ and Gd³⁺], compared to lower-Z RE³⁺ [Y³⁺, La³⁺ and Ce³⁺] ions. Besides, the better photocatalytic properties of higher-Z RE³⁺ adsorbed g-C₃N₄ systems are revealed from better HOMO-LUMO delocalization, decreased HOMO-LUMO gap, increased softness, higher electrophilicity and electron transfer parameter, compared to pristine or lower-Z RE³⁺ adsorbed g-C₃N₄ systems, as obtained from Hirshfeld orbital compositions, density of states and condensed Fukui function analyses.

Comparing the Adsorption Performance of Multiwalled Carbon Nanotubes Oxidized by Varying Degrees for Removal of Low Levels of Copper, Nickel and Chromium(VI) from Aqueous Solutions

Functionalized multiwalled carbon nanotubes (MWCNTs) have drawn wide attention in recent years as novel materials for the removal of heavy metals from the aquatic media. This paper investigates the effect that the functionalization (oxidation) process duration time (3 h or 6 h) has on the ability of MWCNTs to treat water contaminated with low levels of Cu(II), Ni(II) and Cr(VI) (initial concentrations 0.5–5 mg L−1) and elucidates the adsorption mechanisms involved. Adsorbent characterization showed that the molar ratio of C and O in these materials was slightly lower for the oxMWCNT6h, due to the higher degree of oxidation, but the specific surface areas and mesopore volumes of these materials were very similar, suggesting that prolonging the functionalization duration had an insignificant effect on the physical characteristics of oxidized multiwalled carbon nanotubes (oxMWCNTs). Increasing the Ph of the solutions from Ph 2 to Ph 8 had a large positive impact on the removal of Cu(II) and Ni(II) by oxMWCNT, but reduced the adsorption of Cr(VI). However, the ionic strength of the solutions had far less pronounced effects. Coupled with the results of fitting the kinetics data to the Elowich and Weber–Morris models, we conclude that adsorption of Cu(II) and Ni(II) is largely driven by electrostatic interactions and surface complexation at the interface of the adsorbate/adsorbent system, whereas the slower adsorption of Cr(VI) on the oxMWCNTs investigated is controlled by an additional chemisorption step where Cr(VI) is reduced to Cr(III). Both oxMWCNT3h and oxMWCNT6h have high adsorption affinities for the heavy metals investigated, with adsorption capacities (expressed by the Freundlich coefficient KF) ranging from 1.24 to 13.2 (mg g−1)/(mg l−1)n, highlighting the great potential such adsorbents have in the removal of heavy metals from aqueous solutions.