Carbon quantum dots and reduced graphene oxide modified self-assembled S@C3N4/B@C3N4 metal-free nano-photocatalyst for high performance degradation of chloramphenicol

Advancements in the synthesis of carbon dots and their application in biomedicine

As a sort of fluorescent carbon nanomaterial with a particle size of less than 10 nm, carbon dots (CDs) have their own merits of good dispersibility in water, stable optical properties, strong chemical inertness, stable optical properties, and good biosecurity. These excellent peculiarities facilitated them like sensing, imaging, medicine, catalysis, and optoelectronics, making them a new star in the field of nanotechnology. In particular, the development of CDs in the fields of chemical probes, imaging, cancer therapy, antibacterial and drug delivery has become a hot topic in current research. Although the biomedical applications in CDs have been demonstrated in many research articles, a systematic summary of their role in biomedical applications is scarce. In this review, we introduced the basic information of CDs in detail, including synthesis approaches of CDs as well as their favorable properties including photoluminescence and low cytotoxicity. Subsequently, the application of CDs in the field of biomedicine was emphasized. Finally, the main challenges and research prospects of CDs in this field were proposed, which might provide some detailed information in designing new CDs in this promising biomedical field.

Recent progresses in synthesis and modification of g-C3N4 for improving visible-light-driven photocatalytic degradation of antibiotics

Graphitic carbon nitride (g-C3N4) is a widely studied visible-light-active photocatalyst for low cost, non-toxicity, and facile synthesis. Nonetheless, its photocatalytic efficiency is below par, due to fast recombination of charge carriers, low surface area, and insufficient visible light absorption. Thus, the research on the modification of g-C3N4 targeting at enhanced photocatalytic performance has attracted extensive interest. A considerable amount of review articles have been published on the modification of g-C3N4 for applications. However, limited effort has been specially contributed to providing an overview and comparison on available modification strategies for improved photocatalytic activity of g-C3N4-based catalysts in antibiotics removal. There has been no attempt on the comparison of photocatalytic performances in antibiotics removal between modified g-C3N4 and other known catalysts. To address these, our study reviewed strategies that have been reported to modify g-C3N4, including metal/non-metal doping, defect tuning, structural engineering, heterostructure formation, etc. as well as compared their performances for antibiotics removal. The heterostructure formation was the most widely studied and promising route to modify g-C3N4 with superior activity. As compared to other known photocatalysts, the heterojunction g-C3N4 showed competitive performances in degradation of selected antibiotics. Related mechanisms were discussed, and finally, we revealed current challenges in practical application.

Photocatalytic degradation of organic pollutants by carbon quantum dots functionalized g-C3N4: A review

Graphitic carbon nitride (g-C₃N₄) has received much attention due to its unique characteristics of stable physicochemical features, facile preparation, and inexpensive cost. However, the bulk g-C₃N₄ has a weak capacity for pollutant degradation and needs to be modified for real application. Therefore, extensive research has been done on g-C₃N₄, and the discovery of the novel zero-dimensional nanomaterials known as carbon quantum dots (CQDs) provided it with a unique modification option. In this review, the development for the removal of organic pollutants by g-C₃N₄/CQDs was discussed. Firstly, the preparation of g-C₃N₄/CQDs were introduced. Then, the application and the degradation mechanism of g-C₃N₄/CQDs were briefly described. And the discussion of the influencing factors on g-C₃N₄/CQDs' ability to degrade organic pollutants came in third. Finally, the conclusions of photocatalytic degradation of organic pollutants by g-C₃N₄/CQDs and future perspectives followed. This review will strengthen the understanding of the photocatalytic degradation of real organic wastewater by g-C₃N₄/CQDs, including their preparation, application, mechanism, and influencing factors.

Remediation of environmental toxicants using carbonaceous materials: opportunity and challenges

Adsorption and photocatalytic properties of carbonaceous materials, viz., carbon nanotubes (CNTs), fullerene, graphene, graphene oxide, carbon nanofiber nanospheres, and activated carbon, are the legitimate weapons for the remediation of emerging and persistent inorganic/organic contaminants, heavy metals, and radionucleotides from the environment. High surface area, low or non-toxic nature, ease of synthesis, regeneration, and chemical modification of carbonaceous material make them ideal for the removal of toxicants. The research techniques investigated during the last decade for the elimination of environmental toxicants using carbonaceous materials are reviewed to offer comprehensive insight into the mechanism, efficiency, applications, advantages, and shortcomings. Opportunities and challenges associated with carbon materials have been discussed to suggest future perspectives in the remediation of environmental toxicants.

Hexagonal-borocarbonitride (h-BCN) based heterostructure photocatalyst for energy and environmental applications: A review

Formulation of heterojunction with remarkable high efficiency by utilizing solar light is promising to synchronously overcome energy and environmental crises. In this concern, hexagonal-borocarbonitride (h-BCN) based Z-schemes have proved potential candidates due to their spatially separated oxidation and reduction sites, robust light-harvesting ability, high charge pair migration and separation, and strong redox ability. H-BCN has emerged as a hotspot in the research field as a metal-free photocatalyst with a tunable bandgap range of 0-5.5 eV. The BCN photocatalyst displayed synergistic benefits of both graphene and boron nitride. Herein, the review demonstrates the current state-of-the-art in the Z-scheme photocatalytic application with a special emphasis on the predominant features of their photoactivity. Initially, fundamental aspects and various synthesis techniques are discussed, including thermal polymerization, template-assisted, and template-free methods. Afterward, the reaction mechanism of direct Z-scheme photocatalysts and indirect Z-scheme (all-solid-state) are highlighted. Moreover, the emerging Step-scheme (S-scheme) systems are briefly deliberated to understand the charge transfer pathway mechanism with an induced internal electric field. This review critically aims to comprehensively summarize the photo-redox applications of various h-BCN-based heterojunction photocatalysts including CO₂ photoreduction, H₂ evolution, and pollutants degradation. Finally, some challenges and future direction of h-BCN-based Z-scheme photocatalyst in environmental remediation are also proposed.

Magnetic recyclable heterogeneous catalyst Fe3O4/g-C3N4 for tetracycline hydrochloride degradation via photo-Fenton process under visible light

Antibiotic pollution of water resources is a global problem, and the development of new treatments for destroying antibiotics in water is a priority research. We successfully manufactured recyclable magnetic Fe₃O₄/g-C₃N₄ through the electrostatic self-assembly method. Selecting tetracycline (TC) as the target pollutant, using Fe₃O₄/g-C₃N₄ and H₂O₂ developed a heterogeneous optical Fenton system to remove TC under visible light. Fe₃O₄/g-C₃N₄ was systematically characterized by SEM, TEM, XRD, FTIR, XPS, DRS, and electrochemical methods. The removal efficiency of 7% Fe₃O₄/g-C₃N₄ at pH = 3, H₂O₂ = 5 mM, and catalyst dosage of 1.0 g/L can reach 99.8%. After magnetic separation, the Fe₃O₄/g-C₃N₄ photocatalyst can be recycled five times with minimal efficiency loss. The excellent degradation performance of the prepared catalyst may be attributed to the proper coupling interface between Fe₃O₄ and g-C₃N₄ which promotes the separation and transfer of photogenerated electrons. Photogenerated electrons can also accelerate the conversion of Fe³⁺ to Fe²⁺, thereby producing more ˙OH. The new Fe₃O₄/g-C₃N₄ can be used as a raw material for advanced oxidation of water contaminated by refractory antibiotics.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Covalent organic frameworks as promising adsorbent paradigm for environmental pollutants from aqueous matrices: Perspective and challenges

Covalent organic frameworks (COFs) are an emerging class of new porous crystalline polymers materials having robust framework, outstanding structural regularity, highly ordered aperture size, inherent porosity, and chemical stability with designer properties, making them an ideal material for adsorbing a variety of contaminants from water bodies. Presented study focusses on the current advances and progress of pristine COFs as well as COFs based composites as an emerging substitute for the adsorption and removal of a variety of pollutants including water desalination technique, heavy metals, pharmaceuticals, dyes and organic pollutants. The absorption capabilities of COFs-derived architecture are evaluated and equated with those of other commonly used adsorbents. The interaction between sorption ability and structural property as well as some regularly utilized ways to improve the adsorption performance of COFs-based materials are also reviewed. Finally, perspective and a summary about the challenges and opportunities of COFs and COFs-derived materials are discussed to deliver some exciting data for fabricating and designing of COFs and COFs-derived materials for remediation of environmental pollutants.

S-Doping Promotes Pyridine Nitrogen Conversion and Lattice Defects of Carbon Nitride to Enhance the Performance of Zn-Air Batteries

The efficient operation of Zn-air batteries (ZABs) requires highly active and stable reversible air catalysts. Studies have shown that heteroatom-doped carbonaceous nanomaterials are effective metal-free electrocatalysts for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). Herein, we design a facile and scalable catalyst doping scheme to manufacture S-doped carbon nitride (S-C₃N₄). Surprisingly, this metal-free catalyst exhibits excellent OER and ORR electrocatalytic activities in alkaline electrolytes, being comparable to those of commercial Pt/C. For the first time, it is proved by experiments that S doping can not only effectively increase the lattice defects of C₃N₄ but also promote the conversion of pyrrolic nitrogen to pyridine nitrogen, thereby enhancing the bifunctional catalytic activity (OER and ORR). When the catalyst is used as an air electrode for rechargeable ZABs, its performance is obviously better than that provided by commercial Pt/C. Our findings and material design strategies are expected to provide new ideas for the synthesis of various high-performance carbon-based electrocatalysts.

Study on the Adsorption Performance and Adsorption Mechanism of Graphene Oxide by Red Sandstone in Aqueous Solution

In order to deal with the increasingly serious pollution of graphene oxide (GO) to the environment. In this paper, the use of red sandstone to treat GO-contaminated aqueous solution is proposed for the first time, and the adsorption capacity and adsorption mechanism of red sandstone to GO are discussed. The controlled variable method was used to explore the optimal pH, concentration, and quality of red sandstone for GO aqueous solution. The adsorption isotherm, thermodynamics, and adsorption kinetics were fitted. Adsorption characterization tests were performed using XRD, AFM, XPS, FT-IR, SAP, TEM, SAP, laser particle size analyzer, and SEM. The results show that when $T=303\text{K}$ , the optimum adsorption condition of red sandstone for GO is $\text{pH}=4$ , the mass of the adsorbent is 40 mg, and when the concentration of GO is 80 mg/L, the adsorption capacity is 90 mg/g. The adsorption isotherm model fits the Langmuir model. The adsorption thermodynamic experiments and fitting results show that the reaction is endothermic. XRD and FT-IR tests showed that CaCO3 in red sandstone was involved in the adsorption of GO. SEM, TEM, and AFM microscopic results showed that GO was adsorbed on the surface of red sandstone particles. The XPS test showed that Ca2+ in red sandstone and C=O bond in GO undergo ionic or coordination reaction. The adsorption kinetics fit a pseudo-second-order kinetic model. This study will provide some references for the removal of GO in the environment and the interaction mechanism with natural minerals.

Recent Advances in Synthesis, Modification, Characterization, and Applications of Carbon Dots

Although there is significant progress in the research of carbon dots (CDs), some challenges such as difficulty in large-scale synthesis, complicated purification, low quantum yield, ambiguity in structure-property correlation, electronic structures, and photophysics are still major obstacles that hinder the commercial use of CDs. Recent advances in synthesis, modification, characterization, and applications of CDs are summarized in this review. We illustrate some examples to correlate process parameters, structures, compositions, properties, and performances of CDs-based materials. The advances in the synthesis approach, purification methods, and modification/doping methods for the synthesis of CDs are also presented. Moreover, some examples of the kilogram-scale fabrication of CDs are given. The properties and performance of CDs can be tuned by some synthesis parameters, such as the incubation time and precursor ratio, the laser pulse width, and the average molar mass of the polymeric precursor. Surface passivation also has a significant influence on the particle sizes of CDs. Moreover, some factors affect the properties and performance of CDs, such as the polarity-sensitive fluorescence effect and concentration-dependent multicolor luminescence, together with the size and surface states of CDs. The synchrotron near-edge X-ray absorption fine structure (NEXAFS) test has been proved to be a useful tool to explore the correlation among structural features, photophysics, and emission performance of CDs. Recent advances of CDs in bioimaging, sensing, therapy, energy, fertilizer, separation, security authentication, food packing, flame retardant, and co-catalyst for environmental remediation applications were reviewed in this article. Furthermore, the roles of CDs, doped CDs, and their composites in these applications were also demonstrated.

N-acyl-homoserine lactones in extracellular polymeric substances from sludge for enhanced chloramphenicol-degrading anode biofilm formation in microbial fuel cells

Exploring an efficient acclimation strategy to obtain robust bioanodes is of practical significance for antibiotic wastewater treatment by bioelectrochemical systems (BESs). This study investigated the effects of two acclimation conditions on chloramphenicol (CAP)-degrading anode biofilm formation in microbial fuel cells (MFCs). The one was continuously added the extracellular polymeric substances (EPS) extracted from anaerobic sludge and increasing concentrations of CAP after the first start-up phase, while the other was added the EPS-1 (N-acyl-homoserine lactones, namely AHLs were extracted from the EPS) at the same conditions. The results demonstrated that AHLs in the sludge EPS played a crucial role for enhanced CAP-degrading anode biofilm formation in MFCs. The AHL-regulation could not only maintain stable voltage outputs but also significantly accelerate CAP removal in the EPS MFC. The maximum voltage of 653.83 mV and CAP removal rate of 1.21 ± 0.05 mg/L·h were attained from the EPS MFC at 30 mg/L of CAP, which were 0.84 and 1.57 times higher than those from the EPS-1 MFC, respectively. These improvements were largely caused by the thick and 3D structured biofilm, strong and homogeneous cell viability throughout the biofilm, and high protein/polysaccharide ratio along with more conductive contents in the biofilm EPS. Additionally, AHLs facilitated the formation of a biofilm with rich biodiversity and balanced bacterial proportions, leading to more beneficial mutualism among different functional bacteria. More bi-functional bacteria (for electricity generation and antibiotic resistance/degradation) were specifically enriched by AHLs as well. These findings provide quorum sensing theoretical knowledge and practical instruction for rapid antibiotic-degrading electrode biofilm acclimation in BESs.

Photocatalytic hydrogen evolution by degradation of organic pollutants over quantum dots doped nitrogen carbide

Semiconductor photocatalysts are of great importance for addressing current environmental and energy crises. In this study, we developed a simple exfoliation-sonication route to fabricate nitrogen carbide quantum dots (CNQDs) doped nitrogen carbide nanosheet (CNS) composite photocatalysts which were employed to produce hydrogen and degrade organic pollutants (methyl orange, acridine orange, aniline, and phenol) synchronously under visible light irradiation. The presence of acridine orange and aniline enhanced the hydrogen evolution efficiency from 8.8 mmol g^-1 h^-1 to 32.1 and 11.7 mmol g^-1 h^-1, respectively. On the contrary, methyl orange and phenol with the same concentration inhibited hydrogen evolution. Based on the proton chain and energy band analyses, the synchronous mechanism of photocatalytic hydrogen evolution and organic pollutant degradation on CNQDs/CNS was also proposed. On one side, the oxygen-containing functional groups on the surface of CNQDs and the surrounded water molecules constructed proton chains, increasing the combination probability between protons and photo-generated electrons. On the other side, the heterojunction of CNQDs/CNS induced the separation of photo-generated electron-hole pairs. The photo-generated electrons migrate to CNQDs, on which the protons were transformed into hydrogen molecules, while the holes migrated to CNS where the organic pollutants were oxidized synchronously.

Sustainable green nanoadsorbents for remediation of pharmaceuticals from water and wastewater: A critical review

In the last three decades, pharmaceutical research has increased tremendously to offer safe and healthy life. However, the high consumption of these harmful drugs has risen devastating impact on ecosystems. Therefore, it is worldwide paramount concern to effectively clean pharmaceuticals contaminated water streams to ensure safer environment and healthier life. Nanotechnology enables to produce new, high-technical material, such as membranes, adsorbent, nano-catalysts, functional surfaces, coverages and reagents for more effective water and wastewater cleanup processes. Nevertheless, nano-sorbent materials are regarded the most appropriate treatment technology for water and wastewater because of their facile application and a large number of adsorbents. Several conventional techniques have been operational for domestic wastewater treatment but are inefficient for pharmaceuticals removal. Alternatively, adsorption techniques have played a pivotal role in water and wastewater treatment for a long, but their rise in attraction is proportional with the continuous emergence of new micropollutants in the aquatic environment and new discoveries of sustainable and low-cost adsorbents. Recently, advancements in adsorption technique for wastewater treatment through nanoadsorbents has greatly increased due to its low production cost, sustainability, better physicochemical properties and high removal performance for pharmaceuticals. Herein, this review critically evaluates the performance of sustainable green nanoadsorbent for the remediation of pharmaceutical pollutants from water. The influential sorption parameters and interaction mechanism are also discussed. Moreover, the future prospects of nanoadsorbents for the remediation of pharmaceuticals are also presented.

Decontamination of emerging pharmaceutical pollutants using carbon-dots as robust materials

Environmental pollution is a critical issue that requires proper measures to maintain environmental health in a sustainable and effective manner. The growing persistence of several active pharmaceutical residues, such as antibiotics like tetracycline, and anti-inflammatory drugs like diclofenac in water matrices is considered an issue of global concern. Numerous sewage/drain waste lines from the domestic and pharmaceutical sector contain an array of toxic compounds, so-called "emerging pollutants" and possess adverse effects on entire living ecosystem and damage its biodiversity. Therefore, effective solution and preventive measures are urgently required to sustainably mitigate and/or remediate pharmaceutically active emerging pollutants from environmental matrices. In this context, herein, the entry pathways of the pharmaceutical waste into the environment are presented, through the entire lifecycle of a pharmaceutical product. There is no detailed review available on carbon-dots (CDs) as robust materials with multifunctional features that support sustainable mitigation of emerging pollutants from water matrices. Thus, CDs-based photocatalysts are emerging as an efficient alternative for decontamination by pharmaceutical pollutants. The addition of CDs on photocatalytic systems has an important role in their performance, mainly because of their up-conversion property, transfer photoinduced electron capacities, and efficient separation of electrons and holes. In this review, we analyze the strategies followed by different researchers to optimize the photodegradation of various pharmaceutical pollutants. In this manner, the effect of different parameters such as pH, the dosage of photocatalyst, amount of carbon dots, and initial pollutant concentration, among others are discussed. Finally, current challenges are presented from a pollution prevention perspective and from CDs-based photocatalytic remediation perspective, with the aim to suggest possible research directions.

Pollutant degradation with mediator Z-scheme heterojunction photocatalyst in water: A review

The Z-scheme heterojunction is a photocatalyst with narrow band gap and sufficiently high oxidization and reduction powers for degradation of pollutants in waters. This review firstly summarizes the fundamentals of photocatalysis, and explains the need to develop Z-scheme heterojunctions to harvest energy from sunlight effectively. Secondly, contemporary reports of degradation wastewater pollutants, including organic dyes, antibiotics, and other chemicals are reviewed and discussed. A challenge in the selection of an appropriate Z-scheme for removing a specific pollutant is the lack of available energy levels that are offered by the catalyst and the lack of redox energy levels that are required to break down essential chemical bonds of the pollutants. With reference to the redox energy levels offered by the active photocatalytic species, the redox energy levels of specific pollutants studied in literature are estimated. Challenges and prospects concerning the use of the Z-scheme to degrade recalcitrant pollutants under irradiation by sunlight are outlined at the end of this review.

Enhanced degradation of chloramphenicol through peroxymonosulfate and visible light over Z-scheme Photocatalysts: Synergetic performance and mechanism insights

Effective removal of antibiotics in the environment can be a demanding issue concerning the ecosystem and human health. Photocatalysis and peroxymonosulfate (PMS) oxidation have become important methods to effectively remove stubborn pollutants. In this work, by integrating these two technologies, an efficient system for degrading chloramphenicol (CAP) in water was proposed. The system was constructed by coupling strontium-doped lanthanum cobaltate (LSCO5) with chlorine-doped carbon nitride (CGCN). By doping, the increase of oxygen vacancy and the adjustment of bandgap were realized. Photoluminescence and electrochemical impedance experiments showed that the heterojunction can promote electron transfer and photogenerated carrier separation. Under the synergistic effect of PMS oxidation and photocatalysis, the prepared composite with an optimal loading of 40% LSCO5 can degrade 95.6% of CAP within 20 min. Degradation experiments on different pollutants proved the versatility of the catalytic system. The enhanced degradation mechanism of CAP was explored based on the assessment of the degradation efficiency of CAP, electron paramagnetic resonance (EPR), and quenching experiments. Through liquid chromatography-mass spectrometry (LC-MS) analysis, a possible route for CAP degradation was also proposed. This research provides some inspiration for the remediation of polluted water with perovskite-based catalyst under the synergistic effect of PMS and photocatalysis.

Graphene oxide/polyaniline-based microwave split-ring resonator: A versatile platform towards ammonia sensing

Ammonia gas sensors have always received significant attention as robust platforms for emission control, food safety, and monitoring human exhaled breath for the early diagnosis of diseases such as dysfunction of the kidney and liver. This study explores the development of a microwave-based split-ring resonator (SRR) sensor with enhanced sensitivity to detect ammonia gas at low concentrations. The sensor is based on a nanocomposite fabricated by incorporating 10 wt% of graphene oxide (GO) into polyaniline (PANI) via the in-situ polymerization of aniline monomers over the surface of the GO sheets. The addition of GO to PANI results in a high sensitivity of 0.038 dB ppm^-1 for low concentrations (1-25 ppm) and 0.0045 dB ppm^-1 for high concentrations (> 25 ppm) of ammonia gas, in a 150-400 s time interval at room temperature. The prepared sensor can selectively sense ammonia gas in the presence of other higher concentrations of hazardous gases and a wide range of relative humidity levels (15-90%). The response signal is repeatable after 30 days with less than 0.32% deviation. The developed low-cost and robust sensor has the potential to monitor ammonia gas in various applications, including medical, environmental, food, and agricultural sectors.

Electrochemical immunosensor development based on core-shell high-crystalline graphitic carbon nitride@carbon dots and Cd0.5Zn0.5S/d-Ti3C2Tx MXene composite for heart-type fatty acid-binding protein detection

Acute myocardial infarction (AMI) is a significant health problem owing to its high mortality rate. Heart-type fatty acid-binding protein (h-FABP) is an important biomarker in the diagnosis of AMI. In this work, an electrochemical h-FABP immunosensor was developed based on Cd_0.5Zn_0.5S/d-Ti₃C₂T_x MXene (MXene: Transition metal carbide or nitride) composite as signal amplificator and core-shell high-crystalline graphitic carbon nitride@carbon dots (hc-g-C₃N₄@CDs) as electrochemical sensor platform. Firstly, a facile calcination technique was applied to the preparation of hc-g-C₃N₄@CDs and immobilization of primary antibody was performed on hc-g-C₃N₄@CDs surface. Then, the conjugation of the second antibody to Cd_0.5Zn_0.5S/d-Ti₃C₂T_x MXene was carried out by strong π-π and electrostatic interactions. The prepared electrochemical h-FABP immunosensor was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD) method, Fourier-transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The prepared electrochemical h-FABP immunosensor indicated a good sensitivity with detection limit (LOD) of 3.30 fg mL^-1 in the potential range +0.1 to +0.5 V. Lastly, low-cost, satisfactory stable, and environmentally friendly immunosensor was presented for the diagnosis of acute myocardial infarction.

Graphene-Based Composites as Catalysts for the Degradation of Pharmaceuticals

The incessant release of pharmaceuticals into the aquatic environment continues to be a subject of increasing concern. This is because of the growing demand for potable water sources and the potential health hazards which these pollutants pose to aquatic animals and humans. The inability of conventional water treatment systems to remove these compounds creates the need for new treatment systems in order to deal with these class of compounds. This review focuses on advanced oxidation processes that employ graphene-based composites as catalysts for the degradation of pharmaceuticals. These composites have been identified to possess enhanced catalytic activity due to increased surface area and reduced charge carrier recombination. The techniques employed in synthesizing these composites have been explored and five different advanced oxidation processes-direct degradation process, chemical oxidation process, photocatalysis, electrocatalyis processes and sonocatalytic/sono-photocatalytic processes-have been studied in terms of their enhanced catalytic activity. Finally, a comparative analysis of the processes that employ graphene-based composites was done in terms of process efficiency, reaction rate, mineralization efficiency and time required to achieve 90% degradation.

Novel siligraphene/g-C3N4 composites with enhanced visible light photocatalytic degradations of dyes and drugs

In this research, a novel graphene-like SiC (siligraphene) was synthesized using a natural precursor and used to improve the photocatalytic activity of g-C₃N₄. The synthesized siligraphene has shown an excellent photocatalytic property due to its low band-gap and graphene-like structure which increases the electron transfer and reduces the electron-hole recombination rate and can improve the photocatalytic activity. Also, the positive charged Si atoms in siligraphene structure can adsorb oxygen to produce radicals that can promote the oxidation reaction. However, commercial β-SiC has exhibited very poor photocatalytic properties. As we know, g-C₃N₄ is a potential material for photocatalytic applications. Here, the novel siligraphene/g-C₃N₄ composites were successfully synthesized to enhance the photocatalytic properties of g-C₃N₄ in the degradation of model dyes (Congo red, Methyl red, and Methyl orange) and model drugs (Acetaminophen and Tetracycline) under visible light irradiation. Results show that siligraphene/g-C₃N₄ composite exhibits much better photocatalytic properties than pure g-C₃N_4. This enhanced photocatalytic properties can be justified by the enlarged surface area, suitable band gap, excellent electron properties, appropriate surface charge, and efficient migration of electron in siligraphene/g-C₃N₄ composite.

Graphitic Carbon Nitride-Based Composite in Advanced Oxidation Processes for Aqueous Organic Pollutants Removal: A Review

In recent decades, a growing number of organic pollutants released have raised worldwide concern. Graphitic carbon nitride (g-C3N4) has drawn increasing attention in environmental pollutants removal thanks to its unique electronic band structure and excellent physicochemical stability. This paper reviews the recent progress of g-C3N4-based composites as catalysts in various advanced oxidation processes (AOPs), including chemical, photochemical, and electrochemical AOPs. Strategies for enhancing catalytic performance such as element-doping, nanostructure design, and heterojunction construction are summarized in detail. The catalytic degradation mechanisms are also discussed briefly.