A study of the DR23 dye photocatalytic degradation utilizing a magnetic hybrid nanocomposite of MIL-53(Fe)/CoFe2O4: Facile synthesis and kinetic investigations

Green and environmentally friendly architecture of starch-based ternary magnetic biocomposite (Starch/MIL100/CoFe2O4): Synthesis and photocatalytic degradation of tetracycline and dye

The presence of tetracycline and dye as organic contaminants has led to the poisoning of wastewater. The aim of this study is to synthesize a novel biocomposite material by decorating natural starch polymer granules with metal-organic framework (MIL100) and cobalt ferrite magnetic (CoFe2O4) nanoparticles. The synthesized ternary magnetic biocomposite (Starch/MIL100/CoFe2O4) was used for the photocatalytic degradation of methylene blue (MB) and tetracycline (TCN) using LED visible light. The synthesis of the biocomposite was confirmed through comprehensive analyses (XRD, SEM, FTIR, BET, EDX, MAP, DRS, pHzpc, TGA, and Raman). The evaluation examined the influence of initial pollutant concentration, catalyst dosage, pH, and the impact of anions on pollutant removal. The results show that the pollutant degradation ability of biocomposite has been significantly improved, so that the base biopolymer, starch, achieved 18% tetracycline degradation, but when decorated with MIL100 and cobalt ferrite, it increased to 91.2%. It was observed that the degradation for methylene blue improved from 12% for starch to 96.6% for the magnetic biocomposite. The tetracycline degradation decreased by more than 20% in the presence of NaCl, NaNO3, and Na2SO4. The finding shows that the biocomposite adheres to first-order kinetics for both pollutants. The scavengers test identified hydroxyl radicals as the most effective active species in the degradation process. High stability, even after passing 5 cycles of recycling was observed for the biocomposite. The results indicated that the facile and green synthesized Starch/MIL100/CoFe2O4 magnetic biocomposite could be used as an effective photocatalyst for the degradation of Tetracycline and dye at room temperature.

Novel UV-LED-driven photocatalysis-chlorine activation for carbamazepine degradation by sulfur-doped NH2-MIL 53 (Fe) composites: Electronic modulation effect and the dual role of chlorine

Chlorine activation-inefficient and the generation of disinfection by-products (DBPs) has indeed limited the application of UV/chlorine process. In this study, the typical metal-organic frameworks (MOFs) NH2-MIL53(Fe) were successfully modified with organic ligands containing sulfur functional groups and applied to construct a novel UV-LED-driven heterogeneous chlorine activation system. The generation of intermediate energy levels and the charge redistribution effect on Fe-S bond facilitated the excitation of electrons and realized the effective separation of photohole (hvb+) and photoelectron (ecb-). The involvement of S-NH2-MIL53(Fe) improved the efficiency of UV-LED/chlorine process by 6 times. The effective activation of HOCl/OCl- by hvb+ and ecb- significantly enhanced the yield of HO· and Cl·. More importantly, HOCl/OCl- played a dual role in UV-LED/chlorine/S-NH2-MIL53(Fe) process as a precursor for the generation of free radicals and a catalyst for the enhancement of HO· yield, which could achieve efficient removal of the target pollutants at lower chlorine doses. In addition, the presence of low-valent sulfur species and ecb- accelerated the cycle of Fe(II)/Fe(III) and in-situ generation of HO· and Cl·. The known generation of DBPs in UV-LED/chlorine/S-NH2-MIL53(Fe) process decreased by 37.9% compared to UV-LED/chlorine process. Developing novel UV-LED/chlorine/S-NH2-MIL53(Fe) processes provided a reliable strategy to efficiently purify actual micro-polluted water bodies.

Recent advances in metal organic frameworks-based magnetic nanomaterials for waste water treatment

Magnetic nanoparticle-incorporated metal organic frameworks (MOF) are potential composites for various applications such as catalysis, water treatment, drug delivery, gas storage, chemical sensing, and heavy metal ion removal. MOFs exhibits high porosity and flexibility enabling guest species like heavy metal ions to diffuse into bulk structure. Additionally, shape and size of the pores contribute to selectivity of the guest materials. Incorporation of magnetic materials allows easy collection of adsorbent materials from solution system making the process simple and cost-effective. In view of the above advantages in the present review article, we are discussing recent advances of different magnetic material-incorporated MOF (Mg-MOF) composite for application in photocatalytic degradation of dyes and toxic chemicals, adsorption of organic compounds, adsorption of heavy metal ions, and adsorption of dyes. The review initially discusses on properties of Mg-MOF, different synthesis techniques such as mechanochemical, sonochemical (ultrasound) synthesis, slow evaporation and diffusion methods, solvo(hydro)-thermal and iono-thermal method, microwave-assisted method, microemulsion method post-synthetic modification template strategies and followed by application in waste water treatment.

Magnetic Fe3O4/bamboo-based activated carbon/UiO-66 composite as an environmentally friendly and effective adsorbent for removal of Bisphenol A

The magnetic Fe3O4/bamboo-based activated carbon/Zr-based metal-organic frameworks composite (Fe3O4/BAC/UiO-66) was prepared by hydrothermal method. The as-prepared material was analyzed via TEM, XRD, FT-IR, BET-BJH, VSM and XPS techniques, the results showed that it had good dispersion and magnetic separation capacity (Ms = 44.06 emu∙g-1). Then, the adsorption properties of materials for bisphenol A (BPA) were studied. The results revealed that the removal efficiency of 50 mg·L-1 BPA by 0.1 g of adsorbent can reach 87.18-95% in a wide pH range. Langmuir isotherm model and pseudo-second-order kinetic well fitted the adsorption data. The thermodynamic data indicated that the adsorption process was spontaneous and endothermic. Moreover, BAC as a supporter and UiO-66 as the functional part in the ternary composite may have a synergistic effect, which was beneficial for the removal of contaminants. The Fe3O4/BAC/UiO-66 can be simply separated from the water using its strong magnetism after finish adsorption process, which effectively avoids secondary contamination.

MoS2-modified MIL-53(Fe) for synergistic adsorption-photocatalytic degradation of tetracycline

In this paper, MoS₂@MIL-53(Fe) (noted as MSMF) metal-organic backbone adsorption photocatalysts were successfully prepared by a solvothermal method. For the degradation performance of MSMF catalysts on tetracycline pollutants, the effects of MoS₂ doping ratio, reaction mode, and contaminant concentration on the degradation performance were investigated. And the materials were characterized by XRD, XPS, SEM, BET, PL, and ESR to investigate the reaction mechanism. The results showed that the optimal synthesis mass ratio of MoS₂:MIL-53 (Fe) prepared by holding at 150 °C for 10 h was 0.20:1 (20%MSMF). In the adsorption-photocatalytic synergy experiment, 87.62% of tetracycline (30 mg/L) could be removed with 0.20 g/L of 20%MSMF after 40 min of UV irradiation, while the removal of tetracycline by MoS₂ and MIL-53 (Fe) was only 35.99% and 65.40%. The characterization showed that the specific surface area and total pore volume of 20%MSMF were 1.12 and 3.12 times higher than those of MIL-53 (Fe), respectively. And the separation and transfer efficiency of electron-hole pairs were improved for 20%MSMF compared to the constituent components. These results suggest that the doping of MoS₂ enhances the adsorption and photocatalytic ability of MIL-53 (Fe) that can be used for the efficient treatment of tetracycline.

Green Photocatalysis of Organic Pollutants by Bimetallic Zn-Zr Metal-Organic Framework Catalyst

A series of bimetallic Zn-Zr metal-organic frameworks (Zn-Zr MOFs) with different Zn:Zr molar ratios has been synthesized via a green hydrothermal method. The structures and morphologies of these photocatalysts have been characterized and analyzed by FTIR, XRD, SEM, and nitrogen adsorption-desorption. The prepared Zn-Zr MOFs had large specific surface areas and pore volumes, favoring the adsorption of pollutant molecules, which in turn led to an improved photocatalytic effect. The photocatalytic activities of the Zn-Zr MOFs under visible light irradiation have been studied towards rhodamine B (RhB) as a target pollutant. The extent of degradation of RhB in a 40 mg/L aqueous solution reached 97.4%. The optimal photocatalyst could also degrade other dyes, suggesting a certain degree of universality.

Synthesis, modifications and applications of MILs Metal-organic frameworks for environmental remediation: The cutting-edge review

Ever-increasing anthropogenic activities are radically deteriorating the environment by causing severe pollution. Thus, curtailing the environmental pollution and promotion of sustainable development, are the hot issues confronted by scientists in this modern era. Metal-organic frameworks (MOFs) have been highly recognized as emerging promising materials for environmental remediation due to their versatile structure and extraordinary properties. Among them, MILs (MIL = Matérial Institute of Lavoisier) are the series of MOFs mostly known for their incredible stability, unique tailorable pore structures, and astounding versatile environmental applications. Their exclusive physiochemical properties and multifunctionality make them proficient for a wide range of pollutants removal in the exposure of versatile harsh environments, compared to other MOFs. This piece of research summarizes the state-of-the-art of development of MILs on the broad spectrum, highlighting their specificities, such as synthesis techniques, modifications and applications for environmental remediation. However, MILs wonderful properties and extraordinary applications in multiple fields, their deployment on practical and commercial-scale pollutants remediation is hindered by insufficient scientific research on underlying mechanisms and relationships. Henceforth, this review not only signifies the emerging importance of MILs for environmental applications but also indicates the urgency to maximize the scientific research for exploitation of MOFs on a practical level and promotion of green technologies for environmental remediation.

Hybrid metal organic frameworks as an Exotic material for the photocatalytic degradation of pollutants present in wastewater: A review

In this world, water is considered as the Elixir for all living creatures. Human life rolls with water, and every activity depends upon water. Worldwide water resources are being contaminated due to the elevation in the population count, industrialization and urbanization. Ejection of chemicals by industries and domestic sewages remains the major reason in the destruction of natural water resources. Contaminated water with harmful microbes, chemical dyes, pesticides, and carcinogens are the root cause of many diseases and deaths of living species. In this scenario, researchers engaged in producing ultra components to remove the contaminants. Metal organic frameworks (MOF) are the desired combination of organic and inorganic materials to achieve the required target. MOFs possess unique characteristics like tunable internal structure, porosity, crystallinity and high surface area which enable them for energy and environmental application. For the past years, MOFs are concentrated more as a photocatalyst in the treatment of polluted water. These research studies discuss the improvement of photocatalytic performance of MOF by the incorporation of metals, metal coupled with nanoparticles like polymers, graphene, etc., into it to achieve the enhanced photocatalytic activity by scavenging entire chemicals and harmful microbes to retain the quality of water. The target of this review article is to focus on the state of the art research work on MOFs in photocatalytic water treatment technique.

Preparation of novel and highly active magnetic ternary structures (metal-organic framework/cobalt ferrite/graphene oxide) for effective visible-light-driven photocatalytic and photo-Fenton-like degradation of organic contaminants

Herein, MIL-101(Fe), CoFe₂O₄, novel binary (MIL-101(Fe)/CoFe₂O₄, MIL-101(Fe)/GO and CoFe₂O₄/GO), and ternary (MIL-101(Fe)/CoFe₂O₄/(3%)GO and MIL-101(Fe)/CoFe₂O₄/(7%)GO) magnetic composites based upon the MIL-101(Fe) were synthesized. The XRD, FESEM, TEM, EDX, BET-BJH, FTIR, VSM, DRS, PL, EIS and other electrochemical analyses were applied to characterize samples. The MIL/CoFe₂O₄/(3%)GO demonstrated the best performance compared to other samples for visible light photocatalytic and photo-Fenton-like degradation of Direct Red 23 (DtR-23), Reactive Red 198 (ReR-198) dyes as well as Tetracycline Hydrochloride (TC-H) antibiotic. Degradation of dyes using the ternary composite after 70 min of visible light irradiation was greater than that of 99%. The presence of the optimum GO as a strong electron acceptor in MIL/CoFe₂O₄/(3%)GO not only led to the effective separation of charge carriers and thus reduction of their recombination but also increased the absorption of visible light. The composite possessed good durability in terms of stability and reusability. The PL, EIS and electrochemical analyses indicated that the MIL/CoFe₂O₄/(3%)GO improved the optical properties and photocatalytic performance.

Deployment of metal-organic frameworks as robust materials for sustainable catalysis and remediation of pollutants in environmental settings

From metal-organic chemistry, metal-organic frameworks (MOFs) are of supreme interest for catalysis and environmental settings. Owing to anthropogenic sources and booming industrial practices, the most challenging issue is increased water pollution and environmental insecurity. For instance, several types of synthetic dyes are toxic up to a certain extent, as emerging organic contaminants (EOCs) pose adverse environmental and potential health consequences. A gradual increase in the contamination sources and unpredictable environmental changes in terms of anthropogenic pollution severely affect both water availability and distribution. Therefore, the treatment of dyes containing wastewater matrices for water resource generation is one of the most important tasks, which must be addressed effectively. With structural tunability, MOFs have been appearing as a robust tool for remediating toxic pollutants from wastewater matrices. Moreover, the promising functionality, structural tunability, robust catalytic attributes, compatibility, large surface area, stability in water, and ease in surface functionalization make MOFs one of the considerable materials of interest. This review work spotlights the present-day progress related to MOFs and their catalytic and adsorptive chemistry for a sustainable environment. Following a brief introduction, the characteristic rendering MOFs, as adsorbents, are given with prominent examples. Next, several synthesis routes as a roadmap to engineer MOFs are discussed. From the applied perspective, the adsorptive and catalytic potentialities of MOFs as given by addressing sustainable mitigation of toxic dyes. The last section of the work illustrates key challenging issues and future directions by considering the suiting importance of MOFs.

Composite of MOF and chitin as an efficient catalyst for photodegradation of organic dyes

A novel composite has been fabricated by using MOF and chitin as a natural and biocompatible compound. To this purpose, MOF was synthesized by using 2-aminoterephthalic acid and iron (III) chloride hexahydrate and then reacted with Cl-functionalized chitin. The resulting composite was characterized and utilized as a catalyst for degradation of methylene blue both in dark condition and under visible light irradiation. The results indicated superior catalytic activity under visible light irradiation. Furthermore, study of the reaction variables, including basicity, dye concentration and catalyst loading showed that the highest catalytic activity was achieved at basic condition. It was also found that both initial dye concentration and catalyst loading can affect the catalytic activity. To disclose the merits of the composite compared to its individual components, kinetic studies of the photo-degradation process in the presence of the composite, chitin and MOF have been performed. The results confirmed superior activity the composite compared to its components. The study of the mechanism of the reaction using scavengers confirmed that the created holes (h⁺) are the most effective species in the process of photocatalytic degradation of MB. Notably, the catalyst was recyclable and could be used for degradation of other dyes.

Fabrication of poly(acrylic acid) grafted-chitosan/polyurethane/magnetic MIL-53 metal organic framework composite core-shell nanofibers for co-delivery of temozolomide and paclitaxel against glioblastoma cancer cells

In the present study, the magnetic MIL-53 nanometal organic framework particles (NMOFs) were incorporated into poly(acrylic acid) grafted-chitosan/polyurethane (PA-g-CS/PU) core-shell nanofibers for controlled release of temozolomide (TMZ) and paclitaxel (PTX) against U-87 MG glioblastoma cells during chemotherapy/hyperthermia combined method. The synthesized magnetic MIL-53 NMOFs and NMOF-loaded nanofibers were characterized using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Fourier transformed infrared (FTIR), vibrating-sample magnetometer (VSM) and scanning electron microscopy (SEM) analysis. The TMZ and PTX release profiles from magnetic MIL-53 5 wt% loaded-CS-g-PAA-PTX-TMZ/PU fibers were investigated under acidic and physiological pH at temperatures of 37 and 43 °C. The effect of hyperthermia on the release rate of TMZ and PTX from magnetic nanofibers was investigated. An alternating magnetic field could induce the mild hyperthermia (43 °C) for the cells treated with magnetic MIL-53 5 wt% loaded-CS-g-PAA-PTX-TMZ/PU fibers during 10 min. The release data were best described by the non-Fickian diffusion of Korsmeyer-Peppas equation. The cell viability, flowcytometry and Bcl-2, Bax expression levels were investigated to obtain the optimum nanofibrous carrier for apoptosis of U-87 MG cells in vitro. The obtained results indicated that the synthesized magnetic MIL-53 NMOFs loaded- PA-g-CS/PU/TMZ-PTX nanofibers (shell flow rate: 0.8 mLh^-1) could be used as a targeted delivery of anticancer agents with maximum apoptosis of 49.6% of U-87 MG glioblastoma cells under AMF during chemotherapy/hyperthermia combination therapy.