Photocatalytic degradation of bisphenol-A with g-C3N4/MoS2-PANI nanocomposite: Kinetics, main active species, intermediates and pathways

Fabrication of MoS2 restrained magnetic chitosan polysaccharide composite for the photocatalytic degradation of organic dyes

Chitosan (CS) polysaccharide is expected to exhibit greater ionic conductivity, which can be attributed to its increased amino group content when it is blended with different semiconducting materials. Herein, the work used this conducting ability of chitosan and prepared a heterogeneous MoS2-induced magnetic chitosan (MF@CS) composite via the co-precipitation method, which was used to scrutinize the catalytic performance with Methylene Blue (MB) and Malachite Green (MG) dyes by visible light irradiation. The saturation magnetization value of the MF@CS composite is found to be 7.8 emu/g, which is less when compared to that of pristine Fe3O4 (55.7 emu/g) particles. The bandgap of the MF@CS composite is ∼ 2.17eV, which exceeds the bandgap (Eg) of bare MoS2 of 1.80 eV. The maximum color removal of 96.3 % and 93.4 % for MB and MG dyestuffs is recognized in the exposure of the visible spectrum, respectively. At a starting dye dosage of 30 mg/L, 0.1 g/L of MF@CS, a pH level of 8-11, and 70 min of contact with direct light. The photocatalyst provides extremely good durability for a maximum of five phases. Hence, the MF@CS matrix is a viable and appropriate substance for the efficient treatment of effluents containing dye molecules.

Performance and mechanism of biochar@FeMg-LDH for efficient activation of persulfate for degradation of 2, 4-dichlorophenol in groundwater

Groundwater environments are complex, and traditional advanced oxidation technologies mainly based on free radicals have limitations such as poor selectivity and low interference resistance, making it difficult to efficiently degrade target pollutants in groundwater. Therefore, we developed a sludge-based biochar-supported FeMg-layered double hydroxide catalyst (BC@FeMg-LDH) for the catalytic degradation of 2, 4-dichlorophenol (2, 4-DCP) using persulfate (PDS) as an oxidant. The removal efficiency of the catalyst exceeded 95%, showing high oxidation activity in a wide pH range while being almost unaffected by reducing substances and ions in the environment. Meanwhile, under neutral conditions, the leaching of metal ions from BC@FeMg-LDH was minimal, thereby eliminating the risk of secondary pollution. According to quenching experiments and electron paramagnetic resonance spectroscopy, the main active species during BC@FeMg-LDH/PDS degradation of 2, 4-DCP is 1O2, indicating a non-radical reaction mechanism dominated by 1O2. Characterization techniques, including X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy, revealed that the carbonyl (C = O) and metal hydroxyl (M-OH) groups on the material surface were the main reactive sites mediating 1O2 generation. The 1O2 generation mechanism during the reaction involved ketone-like activation of carbonyl groups on the biochar surface and complexation of hydroxyl groups on the material surface with PDS, resulting in the formation of O2·- and further generation of 1O2. 1O2 exhibited high selectivity toward electron-rich organic compounds such as 2, 4-DCP and demonstrated strong interference resistance in complex groundwater environments. Therefore, BC@FeMg-LDH holds promising applications for the remediation of organic-contaminated groundwater.

Research Progress of Methods for Degradation of Bisphenol A

Bisphenol A (BPA), an endocrine disruptor widely used in industrial production, is found in various environmental sources. Despite numerous reports on BPA degradation and removal, the details remain unclear. This paper aims to address this gap by providing a comprehensive review of BPA degradation methods, focusing on biological, physical, and chemical treatments and the factors that affect the degradation of BPA. Firstly, the paper uses VOSviewer software (version 1.6.15) to map out the literature on BPA degradation published in the past 20 years, which reveals the trends and research focus in this field. Next, the advantages and limitations of different BPA degradation methods are discussed. Overall, this review highlights the importance of BPA degradation to protect the environment and human health. The paper provides significant insights for researchers and policymakers to develop better approaches for BPA degradation and removal.

Mechanistic view of MoS2 confined chitosan-polyaniline hybrid composite for the photo-oxidation of cationic dyes

In this article, we describe the formulation of polyaniline-chitosan/MoS2 (PANI-CS @MoS2) blended composite and evaluated its efficiency to degrade the dye molecules Rhodamine B (RhB) and Malachite Green (MG) under visible light. In the photocatalytic mechanism, the CS acts as an electron carrier and binding agent during the oxidation reaction to decrease the recombination of electrons and holes generated by the irradiation of light. FTIR, XPS, XRD, TG, Zeta Potential, UV, SEM, AFM and TEM were used to characterize the PANI-CS@MoS2 composite after it had been synthesized. For the degradation analysis, 30 mg/L concentrations of 50 mL MG and RhB dye solutions were used. The recommended dosage of the composite was 100 mg. For MG and RhB dyes, the colour removal rates were 96.2 % and 91.5 %, respectively, under exposure to visible light and at the pH ranges of 8-11. After being exposed to visible light for 60 min, the whole decay process was accomplished. The photocatalyst offers great extensibility up to five iterations. The Langmuir-Hinshelwood kinetic model governs the rate of dye molecules degradation. The result of the study revealed that the PANI-CS@MoS2 composite matrix perhaps be a trustworthy and practical substrate for the efficient refinement of dye-deteriorated water⁠⁠⁠⁠⁠⁠⁠.

Preparation of site-specific Z-scheme g-C3N4/PAN/PANI@LaFeO3 cable nanofiber membranes by coaxial electrospinning: Enhancing filtration and photocatalysis performance

The coaxial electrospinning method for preparation of g-C₃N₄/polyacrylonitrile (PAN)/polyaniline (PANI)@LaFeO₃ cable fiber membrane (PC@PL) was designed for adsorption-filtration-photodegradation of pollutants. A series of characterization results show that LaFeO₃ and g-C₃N₄ nanoparticles (NPs) are respectively loaded in the inner and outer layers of PAN/PANI composite fibers to construct the site-specific Z-type heterojunction system with spatially separated morphologies. The PANI in cable not only possesses abundant exposed amino/imino functional groups for adsorption of contaminant molecules but also due to the excellent electrical conductivity works as a redox medium for collecting and consuming the electrons and holes from LaFeO₃ and g-C₃N₄, which can efficiently promote photo-generated charge carriers separation and improve the catalytic performance. Further investigations demonstrate that as a photo-Fenton catalyst LaFeO₃ in PC@PL catalyzes/activates the H₂O₂ generated in situ by LaFeO₃/g-C₃N₄, further enhancing the decontamination efficiency of the PC@PL. The porous, hydrophilic, antifouling, flexible and reusable properties of the PC@PL membrane significantly enhance the mass transfer efficiency of reactants by filtration effect and increase the amount of dissolved oxygen, thus producing massive •OH for degradation of pollutants, which maintains the water flux (1184 L m^-2. h^-1 (LMH)) and the rejection rate (98.5%). Profiting from its unique synergistic effect of adsorption, photo-Fenton and filtration, PC@PL exhibits wonderful self-cleaning performance and distinguished removal rate for methylene blue (97.0%), methyl violet (94.3%), ciprofloxacin (87.6%) and acetamiprid (88.9%) within 75 min, disinfection (100% Escherichia coli (E. coli) and 80% Staphylococcus aureus (S.aureus) inactivation)) and excellent cycle stability.

MoS2 and MoS2 Nanocomposites for Adsorption and Photodegradation of Water Pollutants: A Review

The need for fresh and conveniently treated water has become a major concern in recent years. Molybdenum disulfide (MoS₂) nanomaterials are attracting attention in various fields, such as energy, hydrogen production, and water decontamination. This review provides an overview of the recent developments in MoS₂-based nanomaterials for water treatment via adsorption and photodegradation. Primary attention is given to the structure, properties, and major methods for the synthesis and modification of MoS₂, aiming for efficient water-contaminant removal. The combination of MoS₂ with other components results in nanocomposites that can be separated easily or that present enhanced adsorptive and photocatalytic properties. The performance of these materials in the adsorption of heavy metal ions and organic contaminants, such as dyes and drugs, is reviewed. The review also summarizes current progress in the photocatalytic degradation of various water pollutants, using MoS₂-based nanomaterials under UV-VIS light irradiation. MoS₂-based materials showed good activity after several reuse cycles and in real water scenarios. Regarding the ecotoxicity of the MoS₂, the number of studies is still limited, and more work is needed to effectively evaluate the risks of using this nanomaterial in water treatment.

Bacterial-driven upcycling spent Ag into high-performance catalyst for toxic organics reduction

Achieving up-cycling and reusing of silver from the waste X-rays films is currently a huge challenge. Here, we designed a facile method that upcycles Ag⁺ extract efficiently from waste film into highly dispersed value-added biological Ag/AgO-AgCl nanoparticles (bio-Ag/AgO-AgCl NPs) using Bacillus thuringiensis-secreted extracellular polymeric substance without additional reductants and electron donors. The recovery efficiency of silver exceeded 99.8%. Surprisingly, the bio-Ag/AgO-AgCl NPs can well solve the bottleneck problem of slow Ag catalytic kinetics. When the amount of catalyst was 1.9 mg, the reduction efficiency and reduction rate of 10 ppm methyl orange were 97.9% and 7 min, and that of 30 ppm Congo red were 95.3% and 5 min respectively, which is superior to other chemically synthesized silver-base catalysts. This bioremediation methodology provides an effective and practical technical approach for precious metal remediation and sustainable energy development.

Degradation of Tetracycline Hydrochloride by a Novel CDs/g-C3N4/BiPO4 under Visible-Light Irradiation: Reactivity and Mechanism

In recent years, with the large-scale use of antibiotics, the pollution of antibiotics in the environment has become increasingly serious and has attracted widespread attention. In this study, a novel CDs/g-C3N4/BiPO4 (CDBPC) composite was successfully synthesized by a hydrothermal method for the removal of the antibiotic tetracycline hydrochloride (TC) in water. The experimental results showed that the synthesized photocatalyst was crystalline rods and cotton balls, accompanied by overlapping layered nanosheet structures, and the specific surface area was as high as 518.50 m2/g. This photocatalyst contains g-C3N4 and bismuth phosphate (BiPO4) phases, as well as abundant surface functional groups such as C=N, C-O, and P-O. When the optimal conditions were pH 4, CDBPC dosage of 1 g/L, and TC concentration of 10 mg/L, the degradation rate of TC reached 75.50%. Active species capture experiments showed that the main active species in this photocatalytic system were holes (h+), hydroxyl radicals, and superoxide anion radicals. The reaction mechanism for the removal of TC by CDBPC was also proposed. The removal of TC was mainly achieved by the synergy between the adsorption of CDBPC and the oxidation of both holes and hydroxyl radicals. In this system, TC was adsorbed on the surface of CDBPC, and then the adsorbed TC was degraded into small molecular products by an attack with holes and hydroxyl radicals and finally mineralized into carbon dioxide and water. This study indicated that this novel photocatalyst CDBPC has a huge potential for antibiotic removal, which provides a new strategy for antibiotic treatment of wastewater.

Molybdenum Disulfide-Based Nanomaterials for Visible-Light-Induced Photocatalysis

Visible-light-responsive photocatalytic materials have a multitude of important applications, ranging from energy conversion and storage to industrial waste treatment. Molybdenum disulfide (MoS₂) and its variants exhibit high photocatalytic activity under irradiation by visible light as well as good stability and recyclability, which are desirable for all photocatalytic applications. MoS₂-based materials have been widely applied in various fields such as wastewater treatment, environmental remediation, and organic transformation reactions because of their excellent physicochemical properties. The present review focuses on the fundamental properties of MoS₂, recent developments and remaining challenges, and key strategies for tackling issues related to the utilization of MoS₂ in photocatalysis. The application of MoS₂-based materials in visible-light-induced catalytic reactions for the treatment of diverse kinds of pollutants including industrial, environmental, pharmaceutical, and agricultural waste are also critically discussed. The review concludes by highlighting the prospects of MoS₂ for use in various established and emerging areas of photocatalysis.

C-O band structure modified broad spectral response carbon nitride with enhanced electron density in photocatalytic peroxymonosulfate activation for bisphenol pollutants removal

Here, a simple one-step calcination method uses glycolic acid (GA) and urea to synthesize C-O band structure modified carbon nitride with broad spectral response, which is used to construct a peroxymonosulfate/visible light (PMS/vis) system. The solid-state ¹³C NMR proved that C-O band structure was successfully introduced into the carbon nitride. Density functional theory (DFT) calculation show that the introduction of C-O band structure shortens the band gap of 0.05 g GA modified CN (0.05 GA-CN). Besides, Ultraviolet photoelectron spectroscopy (UPS) further illustrate that the 0.05 GA-CN has a higher charge density and promotes the degradation of pollutants. In PMS/vis system, 0.05 GA-CN can completely degrade bisphenol A (BPA) within 36 min. In addition, 0.05 GA-CN can also degrade bisphenol E (BPE) and bisphenol F (BPF). The cyclic voltammetry (CV) curve show that the introduction of C-O band structure enhances the activation ability of PMS. At the same time, 0.05 GA-CN/PMS has enhanced the activity of degrading BPA under blue light (450-462 nm), green light (510-520 nm) and red light (610-625 nm). This research provides a new method to synthesize carbon nitride with enhanced electron density for degradation of bisphenol pollutants in PMS/vis system.

Reduced Graphene Oxide Supported Zinc Tungstate Nanoparticles as Proficient Electro-Catalysts for Hydrogen Evolution Reactions

The nanocomposites of reduced graphene oxide (rGO) supported zinc tungstate nanoparticles (ZnWO4-NPs) receive considerable attention in electro-catalytic hydrogen evolution reactions (HER) and reveal significantly higher electro-catalytic performances than pure ZnWO4-NPs in alkaline media (i.e., 0.5 M KOH electrolyte). The polarization studies show that the ZnWO4-NPs@rGO nanocomposites exhibit low energy loss and good electrode stability during electrochemical reactions for HER. Furthermore, the Tafel slope of ZnWO4-NPs@rGO nanocomposites is found to be approximately 149 mV/dec, which closely agrees with the reported Tafel values of the noble metal electrocatalyst. In contrast, the performance of the ZnWO4-NPs@rGO nanocomposite is found to be approximately 1.5 times higher than that of ZnWO4-NPs in hydrogen production efficiency. Our results emphasize the significance of the nanocomposites with enhanced electro-catalytic activities by lowering the energy loss during electro-catalysis in an alkaline medium.

Development of Free-Standing Titanium Dioxide Hollow Nanofibers Photocatalyst with Enhanced Recyclability

Titanium dioxide hollow nanofibers (THN) are excellent photocatalysts for the photodegradation of Bisphenol A (BPA) due to their extensive surface area and good optical properties. A template synthesis technique is typically employed to produce titanium dioxide hollow nanofibers. This process, however, involves a calcination procedure at high temperatures that yields powder-form photocatalysts that require post-recovery treatment before recycling. Meanwhile, the immobilization of photocatalysts on/into a membrane has been reported to reduce the active surface area. Novel free-standing TiO2 hollow nanofibers were developed to overcome those shortcomings. The free-standing photocatalyst containing 0.75 g of THN (FS-THN-75) exhibited good adherence and connectivity between the nanofibers. The recyclability of FS-THN-75 outperformed the THN calcined at 600 °C (THN-600), which retained 80% of its original weight while maintaining excellent degradation performance. This study recommends the potential application of free-standing TiO2 hollow nanofibers as high potential novel photocatalysts for the treatment of BPA in wastewater.

Nitrogen doped carbon spheres from Tamarindus indica shell decorated with vanadium pentoxide; photoelectrochemical water splitting, photochemical hydrogen evolution & degradation of Bisphenol A

At present energy and environmental remediation are of highest priority for the well defined sustainability. Multifunctional materials that solve both the issues are on high demand. In the present work, a simple method has been followed to extract carbon spheres fromTamarindus indica(commonly known astamarind fruit) shelland doped with nitrogen (N-CS). Vanadium pentoxide nanoflakes were decorated aroundN-CS and the resultant is labeled as V₂O₅/N-CS nanocomposite. The spectroscopic, microscopic, elemental mapping and x-ray photoelectron spectroscopic characterization confirm the nitrogen doping and formation of hybrid material. N-CS, V₂O₅, and V₂O₅/N-CS nanocompositehave been evaluated for their efficiency to evolve hydrogen and for degradation of Bisphenol A (BPA) under visible light. In addition, electrocatalytic hydrogen evolution in presence of light has also been evaluated. The DRS spectrum proves the decrease in the bandgap of V₂O₅ upon its decoration around N-CS material. In a photochemical experiment, the V₂O₅/N-CS nanocomposite evolved 18,600 μmolg^-1 of H_2.Electrochemical hydrogen evolution has also been evaluated in presence of light and obtained the onset potential of -60mV with 52 mV dec^-1 Tafel slope value. Scavenger studies indicate superoxide radicals and hydroxyl radicals are the active species responsible for the degradation of BPA. BPA degradation pathway has been predicted with the support of LC-MS results of the intermediates. All these results indicate the synthesized nanocomposite could be an efficient, stable multifunctional material for photocatalytic applications.

A novel system coupling an electro-Fenton process and an advanced biological process to remove a pharmaceutical compound, metronidazole

The objective of this study was to improve the mineralization of metronidazole, a recalcitrant antibiotic by the development of a new combined process coupling electro-Fenton and a biological process. For biotreatment, various strategies were considered bioaugmentation, bioacclimatation and biostimulation alone or combined. So, the novelty of this strategy is to combine advanced oxidation process with advanced biological process. The conventional biotreatment with activated sludge after 120 h of culture, led to 58.1% mineralization, whereas the pure isolated strains, from activated sludge culture in the presence of metronidazole by-products, identified as Pseudomonas putida (strain A) and Achromobacter sp. (strain B), led to 37.2% and 40.1% respectively. After original acclimation of the isolated strains to electrolysis by-products, the mineralization levels reached 75.6% and 72.9% for strains A and B respectively after 120 h of culture. The results showed that the mineralization of metronidazole by-products was the most important in the case of the combination of autochthonous bioaugmentation and biostimulation, with 96.1% after 120 h of treatment. By coupling the two processes, the global treatment reached therefore a mineralization yield of 97% with a reduction in processing time of 16 days compared to previous conventional biological treatment.

Bio-CQDs surface modification BiOCl for the BPA elimination and evaluation in visible light: The contribution of C-localized level

Carbon quantum dots (CQDs) doping semiconductors can boost solar-to-hydrogen conversion and the photodegradation in VIS-NIR light, therefore attract great attention, but the perspective of CQDs role is seldom explored. Here, a biomass-CQDs was assembled with BiOCl (CQDs/BiOCl), then served as the visible-photodegradation model for a mechanistic investigation. Furthermore, CQDs/BiOCl removed 90% bisphenol A (BPA) within 2 h under visible light. It was attributed to the C-localized state (CLS) produced by CQDs, which transfers forceless photo-electrons (e^-) to generate holes (h⁺) in the CQDs/BiOCl valence band (VB) under visible light, the h⁺ mainly involved in the BPA degradation process. Then, the electrochemical experiments and theoretical calculations further proved that the efficiencies of charge separation (η_CS) and injection (η_CI) were proved by CQDs. Meanwhile, the possible BPA degradation pathways were accordingly proposed, and the ecotoxicity evaluation of the intermediates was also conducted by ECOSAR. The transformation pathways of BPA were divided into five orientations, and the toxicity of intermediates was decreased for Fish (LC50, ChV), Daphnid (LC50, ChV), Algae (EC50, ChV) except for P10 and P12. As the result, this study confirmed the feasibility of bio-CQDs/BiOCl preparation and it could be a photocatalyst to remove and detoxify BPA under visible light.