Effective removal of organic pollutants by adsorption onto chitosan supported graphene oxide-hydroxyapatite composite: A novel reusable adsorbent

A sodium alginate gel bead adsorbent doping with amidoxime-modified hydroxyapatite for the efficient adsorption of uranium

In this work, the modified‑sodium alginate gel beads were prepared by sol-gel method. Due to the presence of water channels in the sodium alginate gel bead, amidoxime groups and PO43- were exposed to the surface of the adsorbent to the maximum extent, resulting in the excellent adsorption capacity of modified‑sodium alginate gel beads. The introduction of amidoxime-modified hydroxyapatite significantly improved the adsorption capacity and the adsorption rate of the gel beads. The adsorption capacity increased from 308.7 to 466.0 mg/g and the adsorption equilibrium time was shortened from 300 min to 120 min. The modified‑sodium alginate gel bead possessed the advantages of short adsorption time, high adsorption efficiency and large adsorption capacity, which could be regarded as a potential adsorbent for uranium. Moreover, the uranium removal ability on the modified gel beads was mainly attributed to the Coulomb force between PO43- and uranium and the complexation between uranium and amidoxime groups. In summary, this work would provide a new idea for the modification and application of sodium alginate-based materials.

Flexible Synthesis of Bio-Hydroxyapatite/Chitosan Hydrogel Beads for Highly Efficient Orange G Dye Removal: Batch and Recirculating Fixed-Bed Column Study

The use of fish waste as a source material for the development of functional beads has significant potential applications in the fields of materials science and environmental sustainability. In this study, a biomaterial bead of chitosan was cross-linked with bio-hydroxyapatite (Bio-Hap/Cs) through the encapsulation process to create a stable and durable material. The beads are characterized using scanning electron microscopy combined with energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, and X-ray diffraction techniques. The adsorption efficiency of Bio-Hap/Cs hydrogel beads was evaluated by using Orange G (OG) dye in both batch and recirculating column systems, and the effect of various parameters on the adsorption capacity was investigated. In the batch study, it was found that OG removal increased with an increasing pH and adsorbent dose. However, in the recirculating column system, a higher bed height and lower flow rate led to increased removal of the OG dye. The kinetic study indicated that the pseudo-second-order model provided a good description of OG adsorption onto Bio-Hap/Cs beads in both batch and recirculating processes, with a high coefficient correlation. The maximum adsorbed amounts are found to be 19.944 mg g-1 and 9.472 mg g-1 in batch and recirculating processes, respectively. Therefore, Bio-Hap/Cs hydrogel beads have demonstrated an effective and reusable material for OG dye remediation from aqueous solutions using recirculating adsorption processes.

Next-Generation Water Treatment: Exploring the Potential of Biopolymer-Based Nanocomposites in Adsorption and Membrane Filtration

This review article focuses on the potential of biopolymer-based nanocomposites incorporating nanoparticles, graphene oxide (GO), carbon nanotubes (CNTs), and nanoclays in adsorption and membrane filtration processes for water treatment. The aim is to explore the effectiveness of these innovative materials in addressing water scarcity and contamination issues. The review highlights the exceptional adsorption capacities and improved membrane performance offered by chitosan, GO, and CNTs, which make them effective in removing heavy metals, organic pollutants, and emerging contaminants from water. It also emphasizes the high surface area and ion exchange capacity of nanoclays, enabling the removal of heavy metals, organic contaminants, and dyes. Integrating magnetic (Fe2O4) adsorbents and membrane filtration technologies is highlighted to enhance adsorption and separation efficiency. The limitations and challenges associated are also discussed. The review concludes by emphasizing the importance of collaboration with industry stakeholders in advancing biopolymer-based nanocomposites for sustainable and comprehensive water treatment solutions.

Alginate magnetic graphene oxide biocomposite synthesis for removal of aromatic amines from aqueous samples

In the present work, alginate magnetic graphene oxide biocomposite was synthesized for the removal and extraction of aromatic amines (aniline, p-chloroaniline (PCA), and p-nitroaniline (PNA)) from water samples. The biocomposite was investigated for its physiochemical characteristics such as surface morphology, functional groups, phase determination, and elemental composition. The results revealed that the functional groups of graphene oxide and alginate retained in biocomposite with magnetic properties. The biocomposite was applied to water samples for the removal and extraction of aniline, p-chloroaniline, and p-nitroaniline through adsorption process. The adsorption process was studied under various experimental conditions like time, pH, concentration, dose, and temperature, and all the parameters were optimized. The maximum adsorption capacities at room temperature have an optimum pH = 4 for aniline = 18.39 mg g^-1, for PCA = 17.13 mg g^-1, and for PNA = 15.24 mg g^-1. Kinetic and isotherm models showed that the experimental data is best fitted to pseudo-second-order kinetic model and the Langmuir isotherm model. Thermodynamic study suggested that the adsorption process is exothermic and spontaneous. Ethanol was found to be the best eluent for the extraction of all the three analytes suggested by the extraction study. The maximum percent recoveries from spiked water samples were calculated for aniline = 98.82%, PCA = 96.65%, and PNA = 93.55% which showed that alginate magnetic graphene oxide biocomposite could be a useful and ecofriendly adsorbent for the removal of organic pollutants in water treatment processes.

CoFe2O4@HaP as Magnetic Heterostructures for Sustainable Wastewater Treatment

The aim of this study was to synthesize a CoFe₂O₄@HaP nanocomposite (HaP-Hydroxyapatite) through the coprecipitation method in aqueous solution, with the purpose of using it in adsorption processes for the removal of Congo Red dye from aqueous solutions. Fourier Transform Infrared Spectroscopy (FT-IR) was used to characterize the synthesized material, identifying absorption bands specific to the functional groups of cobalt ferrite (Fe-O and Co-O at 603 and 472 cm^-1) and hydroxyapatite PO₄^3- at 1035, 962, 603 and 565 cm^-1. Powder X-ray diffraction confirmed the cubic spinel structure of cobalt ferrite (S.G Fd-3m) and the hexagonal structure of hydroxyapatite (S.G P63/m). The nanocomposite's crystallite size was calculated to be 57.88 nm. Nitrogen adsorption/desorption isotherms and BET specific surface area measurements were used to monitor textural parameters, revealing an increase in specific BET surface area when cobalt ferrite nanoparticles (15 m²/g) were introduced into the hydroxyapatite heterostructure (34 m²/g). Magnetic properties were investigated by interpreting hysteresis curves in the ±10 kOe range, with the nanocomposite showing a saturation magnetization of 34.83 emu/g and a coercivity value of 0.03 kOe. The adsorption capacity of the CoFe₂O₄@HaP nanocomposite is up to 15.25 mg/g and the pseudo-second-order kinetic model (Type 1) fits the data with a high correlation coefficient of 0.9984, indicating that the chemical adsorption determines the rate-determining step of the process. The obtained nanocomposite is confirmed by the analyses, and the absorption measurements demonstrate that it can be utilized to degrade Congo Red dye.

Recent advances in biopolymer-based advanced oxidation processes for dye removal applications: A review

Over the past few years, synthetic dye-contaminated wastewater has attracted considerable global attention due to the low biodegradability and the ability of organic dyes to persist and remain toxic, causing numerous health and environmental concerns. As a result of the recalcitrant nature of those complex organic dyes, the remediation of wastewater using conventional wastewater treatment techniques is becoming increasingly challenging. In recent years, advanced oxidation processes (AOPs) have emerged as a potential alternative to treat organic dyestuffs discharged from industries. The most widely employed AOPs include photocatalysis, ozonation, Fenton oxidation, electrochemical oxidation, catalytic heterogeneous oxidation, and ultrasound irradiation. These processes involve the generation of highly reactive radicals to oxidize organic dyes into innocuous minerals. However, many conventional AOPs suffer from several setbacks, including the high cost, high consumption of reagents and substrates, self-agglomeration of catalysts, limited reusability, and the requirement of light, ultrasound, or electricity. Therefore, there has been significant interest in improving the performance of conventional AOPs using biopolymers and heterogeneous catalysts such as metal oxide nanoparticles (MONPs). Biopolymers have been widely considered in developing green, sustainable, eco-friendly, and low-cost AOP-based dye removal technologies. They inherit intriguing properties like biodegradability, renewability, nontoxicity, relative abundance, and sorption. In addition, the immobilization of catalysts on biopolymer supports has been proven to possess excellent catalytic activity and turnover numbers. The current review provides comprehensive coverage of different AOPs and how efficiently biopolymers, including cellulose, chitin, chitosan, alginate, gelatin, guar gum, keratin, silk fibroin, zein, albumin, lignin, and starch, have been integrated with heterogeneous AOPs in dye removal applications. This review also discusses the general degradation mechanisms of AOPs, applications of biopolymers in AOPs and the roles of biopolymers in AOPs-based dye removal processes. Furthermore, key challenges and future perspectives of biopolymer-based AOPs have also been highlighted.

Design strategies, surface functionalization, and environmental remediation potentialities of polymer-functionalized nanocomposites

Inorganic nanoparticles (NPs) have a tunable shape, size, surface morphology, and unique physical properties like catalytic, magnetic, electronic, and optical capabilities. Unlike inorganic nanomaterials, organic polymers exhibit excellent stability, biocompatibility, and processability with a tailored response to external stimuli, including pH, heat, light, and degradation properties. Nano-sized assemblies derived from inorganic and polymeric NPs are combined in a functionalized composite form to import high strength and synergistically promising features not reflected in their part as a single constituent. These new properties of polymer/inorganic functionalized materials have led to emerging applications in a variety of fields, such as environmental remediation, drug delivery, and imaging. This review spotlights recent advances in the design and construction of polymer/inorganic functionalized materials with improved attributes compared to single inorganic and polymeric materials for environmental sustainability. Following an introduction, a comprehensive review of the design and potential applications of polymer/inorganic materials for removing organic pollutants and heavy metals from wastewater is presented. We have offered valuable suggestions for piloting, and scaling-up polymer functionalized nanomaterials using simple concepts. This review is wrapped up with a discussion of perspectives on future research in the field.

Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pH_PZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.

Synergistic effect of chitosan-based sludge aggregates CS@NGS inoculum accelerated the start-up of biofilm reactor treating aquaculture effluent: Insights into performance, microbial characteristics, and functional genes

The moving bed bioreactor (MBBR) process has drawn more attention as a promising biological wastewater treatment process. Nevertheless, achieving quick start-up and microbial biofilm formation remains a significant challenge. Consequently, the present study investigated a novel chitosan-based natural sludge (CS@NGS) seeding strategy for the accelerated start-up of MBBR. Three identical bioreactors were employed; the first bioreactor was without sludge seed as the control (BR1), the second was inoculated only with sludge (BR2), and the third was inoculated with CS@NGS according to the proposed seeding method (BR3). All bioreactors were utilised to treat simulated recirculating aquaculture systems (RAS) effluent. Resultantly, the CS@NGS shortened the start-up period from over twenty to seven days due to the enhanced initial microbial adhesion and biofilm formation. Under optimal conditions, the ammonium removal in BR3 approached 100%, which was relatively higher than BR2 (96.35 ± 1.12%) and BR1 (92.56 ± 2.17%). Moreover, a low nitrite accumulation was exhibited in the effluents, approximately ≤0.03 mg L^-1. The process performance correlated positively with core bacteria from the genera Nakamurella, Hyphomicrobium, Nitrospira, Paenarthrobacter, Rhodococcus, and Stenotrophobacter. The quantitative polymerase chain reaction (qPCR) results demonstrated that the CS@NGS enhanced the expressions of amoA, nxrB, nirK, nirS, narG, and napA nitrogen metabolism-related functional genes to varying degrees. The present study findings can assist the rapid start-up of aquaculture biofilters utilised to solve high nitrite and ammonia accumulation in recirculated water from industrial RAS.

Chitosan-Functionalized Hydroxyapatite-Cerium Oxide Heterostructure: An Efficient Adsorbent for Dyes Removal and Antimicrobial Agent

The current research intended to employ a facile and economical process, which is also ecofriendly to transform camel waste bones into novel heterostructure for cleansing of diverse waste waters. The bones of camel were utilized for preparation of hydroxyapatite by hydrothermal method. The prepared hydroxyapatite was applied to the synthesis of cerium oxide-hydroxyapatite coated with natural polymer chitosan (CS-HAP-CeO₂) heterostructure. Being abundant natural polymer polysaccharide, chitosan possesses exceptional assets such as accessibility, economic price, hydrophilicity, biocompatibility as well as biodegradability, therefore style it as an outstanding adsorbent for removing colorant and other waste molecules form water. This heterostructure was characterized by various physicochemical processes such as XRD, SEM-EDX, TEM, and FT-IR. The CS-HAP-CeO₂ was screened for adsorption of various industrially important dyes, viz., Brilliant blue (BB), Congo red (CR), Crystal violet (CV), Methylene blue (MB), Methyl orange (MO), and Rhodamine B (RB) which are collective pollutants of industrial waste waters. The CS-HAP-CeO₂ demonstrated exceptional adsorption against CR dye. The adsorption/or removal efficiency ranges are BB (11.22%), CR (96%), CV (28.22%), MB (47.74%), MO (2.43%), and RB (58.89%) dyes. Moreover, this heterostructure showed excellent bacteriostatic potential for E. coli, that is liable for serious waterborne diseases. Interestingly, this work revealed that the incorporation of cerium oxide and chitosan into hydroxyapatite substantially strengthened antimicrobial and adsorption capabilities than those observed in virgin hydroxyapatite. Herein, we recycled the unwanted camel bones into a novel heterostructure, which assists to reduce water pollution, mainly caused by the dye industries.

Highly enhanced adsorption performance to uranium(VI) by facile synthesized hydroxyapatite aerogel

In order to protect environment and save uranium resources, it was necessary to find a highly efficient adsorbent for uranium recovery from wastewater. In this work, we used a freeze-drying-calcination method to synthesize HAP aerogel to effectively remove uranium. Compared with commercially available nano-hydroxyapatite, HAP aerogel presented better adsorption performance. This was because the as-prepared HAP aerogel presented continuous porous structure, which could provide more active sites for the adsorption to uranium. The uranium removal efficiency of HAP aerogel arrived 99.4% within 10 min and the maximum adsorption capacity was up to 2087.6 mg g^-1 at pH = 4.0 and 298 K. In addition, the immobilization of uranium on HAP aerogel was chemisorption, which was probably due to adsorption, dissolution-precipitation and ions exchange. These results indicated that the as-prepared HAP aerogel could be widely used as a high efficiency and potential adsorbent for the treatment of uranium-containing wastewater in the future.

Highly Effective Cow Bone Based Biocomposite for the Sequestration of Organic Pollutant Parameter from Palm Oil Mill Effluent in a Fixed Bed Column Adsorption System

The reduction of chemical oxygen demand (COD) from palm oil mill effluent (POME) is very significant to ensure aquatic protection and the environment. Continuous adsorption of COD in a fixed bed column can be an effective treatment process for its reduction prior to discharge. Adsorption capacity of bone derived biocomposite synthesized from fresh cow bones, zeolite, and coconut shells for the reduction in the organic pollutant parameter was investigated in this study in a fixed bed column. The effect of influent flow rate (1.4, 2.0, and 2.6 mL/min) was determined at an influent pH 7. The optimum bed capacity on the fabricated composite of surface area of 251.9669 m²/g was obtained at 1.4 mL/min at breakthrough time of 5.15 h influent POME concentration. The experimental data were fitted to Thomas, Adams–Bohart, and Yoon–Nelson models fixed bed adsorption models. It was revealed that the results fitted well to the Adams Bohart model with a correlation coefficient of R² > 0.96 at different influent concentration. Adsorption rate constant was observed to increase at lower flow rate influent concentration, resulting in longer empty bed contact time (EBCT) for the mass transfer zone of the column to reach the outlet of the effluent concentration. In general, the overall kinetics of adsorption indicated that the reduction in COD from POME using a bone-biocomposite was effective at the initial stage of adsorption. The pore diffusion model better described the breakthrough characteristics for COD reduction with high correlation coefficient. Shorter breakthrough time compared to EBCT before regeneration indicated that the bone composite was suitable and effective for the reduction in COD from POME using fixed bed column adsorption.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Applications of chitin and chitosan based biomaterials for the adsorptive removal of textile dyes from water - A comprehensive review

The presence of pollutants in the water bodies deteriorate the water quality and make it unfit for use. From an environmental perspective, it is essential to develop new technologies for the wastewater treatment and recycling of dye contaminated water. The surface modified chitin and chitosan biopolymeric composites based adsorbents, have an important role in the toxic organic dyes from removal wastewater. The surface modification of biopolymers with various organics and inorganics produces more active sites at the surface of the adsorbent, which enhances dye and adsorbent interaction more reliable. Herein, the work brought in the thought of the application of various chitin and chitosan composites in wastewater remediation and suggested the versatility in composites for the development of rapid, selective and effective removal processes for the detoxification of a variety of organic dyes. It further emphasizes the existing obstruction and impending prediction for the deprivation of dyes via adsorption techniques.

Advances in biopolymer composites and biomaterials for the removal of emerging contaminants

Domestic, agriculture, and industrial activities contaminate the waterbodies by releasing toxic substances and pathogens. Removal of pollutants from wastewater is critical to ensuring the quality of accessible water resources. Several wastewater treatments are often used. Researchers are increasingly focusing on adsorption, ion exchange, electrostatic interactions, biodegradation, flocculation, and membrane filtration for the efficient reduction of pollutants. Biopolymers are a combination of two or more products produced by the living organisms used to give the desired finished product with a unique attribute. Biomaterials are also similar to traditional polymers by having higher flexibility, biodegradability, low toxicity, and nontoxic secondary byproducts producing ability. Grafting, functionalization, and crosslinking will be used to enhance the characteristics of biopolymers. The present chapter will illustrate some of the important biopolymers and its compos that will impact wastewater treatment in the future. Most commonly used biopolymers including chitosan (CS), activated carbon (AC), carbon-nanotubes (CNTs), and graphene oxide (GO) are discussed. Finally, the opportunities and difficulties for applying adsorbents to water pollution treatment are discussed.

Enhanced adsorption of resorcinol onto phosphate functionalized graphene oxide synthesized via Arbuzov Reaction: A proposed mechanism of hydrogen bonding and π-π interactions

Phosphate functionalized graphene oxide (PGO) was successfully prepared by Arbuzov reaction and employed for adsorption of resorcinol from an aqueous phase. The phosphate functional groups were successfully incorporated onto the PGO surface by the formation of P-C bonds as identified by the analysis of FTIR and XPS spectra. The evaluation of adsorption capacity of resorcinol onto PGO exhibited significant improvement of resorcinol removal, achieving an adsorption capacity of 50.25 mg/g in the pH range of 4-7 which was 15 times higher than pristine graphene oxide. The addition of 2.4 M and 5 M NaCl in the adsorption system significantly increased the adsorption capacity towards resorcinol from 50.25 mg/g to 82.10 mg/g and 128.10 mg/g, respectively. Based on kinetics and adsorption isotherm studies, Pseudo-First-Order and Langmuir model are the best model to describe the adsorption process indicating that the adsorption is dominantly controlled by physisorption. The thermodynamic analysis suggested that the adsorption process was the favorable, spontaneous, and endothermic process. Besides, the interplay of hydrogen bonding and π-π interactions is proposed to be the governing physisorption mechanism. The outstanding reusability and better adsorption performance make PGO a promising adsorbent for environmental remediation of resorcinol.

Graphene-Based Materials Immobilized within Chitosan: Applications as Adsorbents for the Removal of Aquatic Pollutants

Graphene and its derivatives, especially graphene oxide (GO), are attracting considerable interest in the fabrication of new adsorbents that have the potential to remove various pollutants that have escaped into the aquatic environment. Herein, the development of GO/chitosan (GO/CS) composites as adsorbent materials is described and reviewed. This combination is interesting as the addition of graphene to chitosan enhances its mechanical properties, while the chitosan hydrogel serves as an immobilization matrix for graphene. Following a brief description of both graphene and chitosan as independent adsorbent materials, the emerging GO/CS composites are introduced. The additional materials that have been added to the GO/CS composites, including magnetic iron oxides, chelating agents, cyclodextrins, additional adsorbents and polymeric blends, are then described and discussed. The performance of these materials in the removal of heavy metal ions, dyes and other organic molecules are discussed followed by the introduction of strategies employed in the regeneration of the GO/CS adsorbents. It is clear that, while some challenges exist, including cost, regeneration and selectivity in the adsorption process, the GO/CS composites are emerging as promising adsorbent materials.

Crystal violet dye sorption over acrylamide/graphene oxide bonded sodium alginate nanocomposite hydrogel

The synthesis of acrylamide bonded sodium alginate (AM-SA) hydrogel and acrylamide/graphene oxide bonded sodium alginate (AM-GO-SA) nanocomposite hydrogel was successfully performed using the free radical method. The AM-SA and AM-GO-SA hydrogels were applied as composited adsorbents in crystal violet (CV) dye removal. The adsorption process experiments were performed discontinuously and the acquired data showed that the efficiency is more dependent on pH than other factors. The C-O, CO, and CC groups were detected in the produced hydrogels. The amount of surface area was computed to be 44.689 m²/g, 0.0392 m²/g, and 6.983 m²/g for GO, AM-SA, and AM-GO-SA nanocomposite hydrogel, respectively. The results showed that the experimental data follow the Redlich-Peterson isotherm model. Also, the maximum adsorption capacity of monolayer for CV dye adsorption was determined using AM-SA hydrogel and AM-GO-SA nanocomposite hydrogel 62.07 mg/g and 100.30 mg/g, respectively. In addition, the parameters R_L, n, and E showed that the processes of adsorption of CV dye using both types of adsorbents are physical and desirable. Thermodynamically, the CV elimination was exothermic and spontaneous. Besides, thermodynamic results showed that the adsorption process is better proceeding at low temperatures. The experimental data followed a pseudo- second- order (PSO) kinetic model. Also, the Elovich model showed that AM-GO-SA nanocomposite hydrogel has more ability to absorb CV dye. Therefore, according to the obtained results, it can be stated that the produced hydrogels are efficient and viable composited adsorbent in removing CV dye from aqueous solution.

Chitosan-based hybrid materials for adsorptive removal of dyes and underlying interaction mechanisms

Environmental pollution by dyes molecules has become a subject of intensive research in recent years due to their hazardous effects on human health, organisms, and animals. Effective treatment and removal of dye molecules from the environmental matrices and water sources are of supreme concern. The deployment of cheap, safe, green, sustainable, and eco-friendly materials to remove these pollutants from water is the main challenge during the last decades. Chitosan and its derivatives/composites, as a cheap, easily available, and environmentally friendly sorbent, have attracted increasing attention for the removal of dye molecules. This review article focuses on the application of chitosan and chitosan-based smart adsorbents for the removal of dyes. Recent methods for the preparation of chitosan-based composites and their application in the removal of dyes are discussed. Moreover, the possible mechanisms for the interaction of chitosan and chitosan-based adsorbents with dyes molecules were evaluated. Finally, future prospects of using chitosan as an adsorbent for the removal of dye molecules are directed.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.

Utilization of Rice Husk Ash in the Preparation of Graphene-Oxide-Based Mesoporous Nanocomposites with Excellent Adsorption Performance

Rice husk is an agricultural biomass waste. Burning rice husks in an oxygenic atmosphere releases thermal energy and produces ash that is rich in silica. Rice husk ash (RHA) can be used as a sustainable source of silica for producing high-value-added products. In this study, mesostructural graphene oxide (GO)/SBA-15, a graphene-based hybrid material, was synthesized from RHA. The materials are inspected by Fourier transform infrared spectrometer, Raman spectrometer, field-emission scanning electron microscopy, transmission electron microscopy, surface area analyzer, and X-ray diffraction analyzer. Studies have revealed that GO/SBA-15 possesses various oxygen functional groups that are helpful for dye adsorption. The material consisted of high pore volume of 0.901 cm³/g, wide pores of diameter 11.67 nm, and high surface area of 499 m²/g. Analysis of the methylene blue (MB) adsorption behavior of GO/SBA-15 composites revealed that their adsorption capacity depended on the gelation pH, GO content, adsorbent dosage, and initial dye (MB) concentration. The highest adsorption capacity of GO/SBA-15 was 632.9 mg/g. Furthermore, the adsorption isotherms and kinetics of GO/SBA-15 were investigated. This study demonstrated the great advantage of treated RHA and the potential of this material for use in organic dye adsorption.

Complex interior and surface modified alginate reinforced reduced graphene oxide-hydroxyapatite hybrids: Removal of toxic azo dyes from the aqueous solution

In this study, alginate reinforced reduced graphene oxide@hydroxyapatite (rGO@HAP-Alg) hybrids have been fabricated via co-precipitation technique. The developed adsorbent was effectively utilized for the removal of Reactive Blue 4 (RB4), Indigo Carmine (IC) and Acid Blue 158 (AB158) azo dyes from aqueous solution, and found to have the adsorption efficiency of 45.56, 47.16 and 48.26 mg/g, respectively. The thermodynamic parameters demonstrated the endothermic and spontaneous nature of the adsorption process. The adsorption system was pH-dependent and showed maximum dye removal at pH 6-7, which was indicative of the electrostatic interactions, surface complexation and the hydrogen bonding mechanisms involved between the adsorbate and adsorbent during the adsorption process. Furthermore, the renewability studies demonstrated the reusability and stability of rGO@HAP-Alg hybrids up to five successive cycles. This study delivers a promising strategy for removing dye molecules and extends the potential application of rGO@HAP-Alg hybrids to treat practical dye contaminated water/wastewater.

Recent Developments in Chitosan-Based Adsorbents for the Removal of Pollutants from Aqueous Environments

The quality of water is continuously under threat as increasing concentrations of pollutants escape into the aquatic environment. However, these issues can be alleviated by adsorbing pollutants onto adsorbents. Chitosan and its composites are attracting considerable interest as environmentally acceptable adsorbents and have the potential to remove many of these contaminants. In this review the development of chitosan-based adsorbents is described and discussed. Following a short introduction to the extraction of chitin from seafood wastes, followed by its conversion to chitosan, the properties of chitosan are described. Then, the emerging chitosan/carbon-based materials, including magnetic chitosan and chitosan combined with graphene oxide, carbon nanotubes, biochar, and activated carbon and also chitosan-silica composites are introduced. The applications of these materials in the removal of various heavy metal ions, including Cr(VI), Pb(II), Cd(II), Cu(II), and different cationic and anionic dyes, phenol and other organic molecules, such as antibiotics, are reviewed, compared and discussed. Adsorption isotherms and adsorption kinetics are then highlighted and followed by details on the mechanisms of adsorption and the role of the chitosan and the carbon or silica supports. Based on the reviewed papers, it is clear, that while some challenges remain, chitosan-based materials are emerging as promising adsorbents.