The physicochemical properties and structure of alkylammonium protic ionic liquids of RnH4-nNX (n = 1–3) family. A mini–review

DFT and ab initio molecular dynamics simulation study of the infrared spectrum of the protic ionic liquid 2-hydroxyethylammonium formate

Protic ionic liquids (PILs) typically show a complex band shape in their infrared (IR) spectra in the high-frequency range due to the hydrogen stretching vibrations of functional groups forming rather strong hydrogen bonds (H-bonds). In the low-frequency range, the intermolecular stretching mode of the H-bond leaves a mark in the far-IR spectrum of PILs. In this study, the IR spectrum of the PIL 2-hydroxyethylammonium formate, [HOCH2CH2NH3][HCOO], is investigated in order to identify the different modes that contribute to the high-frequency band shape, i.e. the cation ν(NH), ν(OH), and ν(CH) modes, and the anion ν(CH) mode, as well as the intermolecular mode of the strongest H-bond in the far-IR spectrum. The assignment is validated by quantum chemistry calculations of clusters at the density functional theory (DFT) level for four ionic pairs and by ab initio molecular dynamics (AIMD) simulations of ten ionic pairs. There is good agreement between the vibrational frequencies obtained from DFT and AIMD simulations for both the high- and low-frequency ranges. Based on the calculations, the strong H-bond interaction between the cation -NH3 group and [HCOO]- gives a broad band envelope associated with the ν(NH) mode in the high-frequency range of the IR spectrum on which there are narrower peaks corresponding to the ν(OH) and ν(CH) modes. In the far-IR (FIR) spectrum, the anions' rattling motion gives a broad feature with a maximum at 160 cm-1, while the H-bond's intermolecular NH⋯O stretching mode appears as a peak at 255 cm-1.

Proton transfer between sulfonic acids and various propylamines by density functional theory calculations

CONTEXT

Proton transfer in acid-base systems is not well understood. Some acid-base reactions do not proceed to the extent that is expected from the difference in the pK_a values between the base and acid in aqueous solutions, yet some do. In that regard, we have computationally studied the process of proton transfer from the acids of varying strength (benzenesulfonic acid (BSu), methansulfonic acid (MsO), and sulfuric acid (SA)) to the amines with different numbers of propyl substituents on the nitrogen atom (propylamine (PrA), dipropylamine (DPrA), and tripropylamine (TPrA)) upon complexation. Density functional theory calculations were used to thoroughly examine the energetic and structural aspects of the molecular complexes and/or ionic pairs resulting from the acid-base interaction. The potential energy curves along the proton transfer coordinate in these acid-amine systems were analyzed. The change in free energies accompanying the molecular complexes and ionic pair formations was calculated, and the relationship between the energy values and the ΔРА parameter (difference in proton affinity of the acid anion and amine) was established. The larger ΔРА values were found to be unfavorable for the formation of ionic pairs. Using structural, energy, QTAIM, and NBO analyses, we determined that the hydrogen bonds in the molecular complexes PrA-MsO and PrA-BSu are stronger than those in their corresponding ionic pairs. The ionic pairs with the TPrA cation possess the strongest hydrogen bonds of all the ionic pairs being studied, regardless of the anion. The results showed that hydrogen bonding interactions in the molecular complexes contribute significantly to the energies of the acid-base interaction, while in the ionic pairs, the most important energy contribution comes from Coulomb interactions, followed by hydrogen bonding and dispersion forces. The ionic pairs with propylammonium, dipropylammonium, and tripropylammonium cations have stronger ion-ion interactions than tetrapropylammonium (TetPrA)-containing ionic pairs with the same anions. This effect rises with the order of the cation: TetPrA → TPrA → DPrA → PrA, and the sequence of anions is SA → BSu → MsO. The results obtained here expand the concept of acid-base interaction and provide an alternative to experimental searches for suitable acids and bases to obtain new types of protic ionic liquids.

METHODS

All quantum-chemical calculations were carried out by using the DFT/B3LYP-GD3/6-31++G(d,p) level as implemented in the Gaussian 09 software package. For the resulting structures, the electron density distribution was analyzed by the "atoms in molecules" (QTAIM) and the natural bond orbital (NBO) methods on the wave functions obtained at the same level of theory by AIMAll Version 10.05.04 and Gaussian NBO Version 3.1 programs, respectively.

Phase Change Materials for Renewable Energy Storage at Intermediate Temperatures

Thermal energy storage technologies utilizing phase change materials (PCMs) that melt in the intermediate temperature range, between 100 and 220 °C, have the potential to mitigate the intermittency issues of wind and solar energy. This technology can take thermal or electrical energy from renewable sources and store it in the form of heat. This is of particular utility when the end use of the energy is also as heat. For this purpose, the material should have a phase change between 100 and 220 °C with a high latent heat of fusion. Although a range of PCMs are known for this temperature range, many of these materials are not practically viable for stability and safety reasons, a perspective not often clear in the primary literature. This review examines the recent development of thermal energy storage materials for application with renewables, the different material classes, their physicochemical properties, and the chemical structural origins of their advantageous thermal properties. Perspectives on further research directions needed to reach the goal of large scale, highly efficient, inexpensive, and reliable intermediate temperature thermal energy storage technologies are also presented.

Macrocyclic Ionic Liquids with Amino Acid Residues: Synthesis and Influence of Thiacalix[4]arene Conformation on Thermal Stability

Novel thiacalix[4]arene based ammonium ionic liquids (ILs) containing amino acid residues (glycine and L-phenylalanine) in cone, partial cone, and 1,3-alternate conformations were synthesized by alkylation of macrocyclic tertiary amines with N-bromoacetyl-amino acids ethyl ester followed by replacing bromide anions with bis(trifluoromethylsulfonyl)imide ions. The melting temperature of the obtained ILs was found in the range of 50−75 °C. The effect of macrocyclic core conformation on the synthesized ILs’ melting points was shown, i.e., the ILs in partial cone conformation have the lowest melting points. Thermal stability of the obtained macrocyclic ILs was determined via thermogravimetry and differential scanning calorimetry. The onset of decomposition of the synthesized compounds was established at 305−327 °C. The compounds with L-phenylalanine residues are less thermally stable by 3−19 °C than the same glycine-containing derivatives.

Relationship between Structure and Properties of Nonstoichiometric Protic Ionic Liquids: n-Butylammonium Butyrate System

Nonstoichiometric protic ionic liquids have drawn much attention in applications, including fuel cells, batteries, and reaction media. An understanding of the relationship between their structure and properties is instructive for further applications. However, there are only a few studies on nonstoichiometric protic ionic liquids. Herein, the density, viscosity, and conductivity of nonstoichiometric n-butylammonium butyrate protic ionic liquids were measured, and we used small/wide-angle scattering (S/WAXS), electron paramagnetic resonance (EPR), and molecular dynamics (MD) simulation to explore the effect of mesostructure on their properties. It is found that the hydrogen bonds drive excess N-butyric acid (PrCOOH) molecules to wrap around ion clusters, resulting in the higher density and viscosity of PrCOOH-rich PILs. The microenvironments around various radicals differ significantly in BuNH₂-rich and PrCOOH-rich PILs because of the distinct molecular arrangements. This research provided a link between the physicochemical properties and structures of nonstoichiometric PILs, which is essential for their applications in electrolytes and organic reactions.

Hydrogen Bond Redistribution Effects in Mixtures of Protic Ionic Liquids Sharing the Same Cation: Non-ideal Mixing with Large Negative Mixing Enthalpies

We report a joint experimental and theoretical study characterising the hydrogen bond (HB) redistribution in mixtures of two different protic ionic liquids (PILs) sharing the same cation: triethylammonium-methanesulfonate ([TEA][OMs]) and...

Alkylimidazolium Protic Ionic Liquids: Structural Features and Physicochemical Properties

We focus on a series of protic ionic liquids (PILs) with imidazolium and alkylimidazolium (1R3HIm, R = methyl, ethyl, propyl, and butyl) cations. Using the literature data and our experimental results on the thermal and transport properties, we analyze the effects of the anion nature and the alkyl radical length in the cation structure on the above properties. DFT calculations in gas and solvent phase have resulted in microscopic insights into the structure and cation-anion binding in these PILs. We show that the higher thermodynamic stability of an ion pair raises the PIL decomposition temperature. The melting points of the salts with the same cation decrease as the hydrocarbon radical in the cation becomes longer, which correlates with the weaker ion-ion interaction in the ion pairs. A comparative analysis of the protic ILs and corresponding ILs (1R3MeIm) with the same radical (R) in the cation structure and the same anion has been performed. The lower melting points of the ILs with 1R3MeIm cations are assumed to result from the weakening both of the ion-ion interaction and hydrogen bond.

Biobased Ionic Liquids as Multitalented Materials in Lipidic Drug Implants

Lipidic implants are valuable controlled delivery systems that present good biocompatibility and are useful for long-lasting therapies. However, these promising systems can present inflexible drug release profiles that limit their performance. Thus, finding new materials to overcome this drawback is crucial. Herein, lipidic implants containing caffeine and poorly soluble salicylic acid and rutin were developed. The inclusion of Gelucire^® 50/02, sucrose, and two biobased ionic liquids, [Cho][Phe] and [Cho][Glu], were evaluated as a mean to improve the performance of the systems. The formulation procedure, dye content distribution, drug content, drug release, water content, and lipidic erosion of the developed systems were assessed. AFM analysis of the implants containing ILs was also performed. The results demonstrated that neither Gelucire^® 50/02 nor sucrose were suitable tools to improve the drug release profile. In contrast, the ILs proved to be promising materials for multiple reasons; not only did they facilitate the formulation and incorporation of the studied drugs into the implants, but they also allowed a more suitable release profile, with [Cho][Glu] allowing a higher drug release due to its ability to increase surface wrinkling. Hence, this study showcases ILs as multitalented materials in lipid-based drug implants.

Assessing the Structure of Protic Ionic Liquids Based on Triethylammonium and Organic Acid Anions

We present a computational analysis of the short-range structure of three protic ionic liquids based on strong organic acids: trifluoracetate, methanesulfonate, and triflate of triethylammonium. Accurate ab initio computations carried out on the gas-phase dimers show that the protonation of triethylamine is spontaneous. We have identified the anion-cation binding motif that is due to the presence of a strong hydrogen bond and to electrostatic interactions. The strength of the hydrogen bond and the magnitude of the binding energy decrease in the order trifluoroacetate ≳ methanesulfonate > triflate. The corresponding simulations of the bulk phases, obtained using a semiempirical evaluation of the interatomic forces, reveal that on short timescales, the state of the three liquids remains highly ionized and that the gas-phase cation-/anion-binding motif is preserved while no other peculiar structural features seem to emerge.

Cholinium amino acid-based ionic liquids

Boosted by the simplicity of their synthesis and low toxicity, cholinium and amino acid-based ionic liquids have attracted the attention of researchers in many different fields ranging from computational chemistry to electrochemistry and medicine. Among the uncountable IL variations, these substances occupy a space on their own due to their exceptional biocompatibility that stems from being entirely made by metabolic molecular components. These substances have undergone a rather intensive research activity because of the possibility of using them as greener replacements for traditional ionic liquids. We present here a short review in the attempt to provide a compendium of the state-of-the-art scientific research about this special class of ionic liquids based on the combination of amino acid anions and cholinium cations.