Investigation of interactions between zein and natamycin by fluorescence spectroscopy and molecular dynamics simulation

Electrochemical and chromatographic methods for the determination of some natural food preservatives - A review

Food preservatives are essential for maintaining the safety and quality of food products. Nisin and natamycin are natural food preservatives extensively used in the food industry to enhance various food products' shelf life and safety. Nisin, a polycyclic antibacterial peptide, is effective against a broad spectrum of Gram-positive bacteria, including foodborne pathogens and spoilage organisms. On the other hand, natamycin, a polyene macrolide antifungal agent, exhibits strong efficacy against molds and yeasts, without affecting bacteria, thus preserving the natural microbial balance in fermented foods and other products susceptible to fungal contamination. Furthermore, determining food preservatives precisely is essential to guaranteeing food safety and quality. Due to the low concentrations used from these preservatives and the possibility of interference from food matrices during analysis, sensitive and accurate analytical techniques are required for the analysis of nisin and natamycin. Both electrochemical and chromatographic techniques enable rapid, sensitive, and precise analysis. This review highlights the research results in the last twenty-four years and methodological advancements and compares the sensitivity, accuracy, and practical applicability of these techniques to provide insight into the usefulness and suitability of electrochemical and chromatographic techniques for monitoring nisin and natamycin levels for regulatory compliance and food quality control. Moreover, it suggests future research directions to improve the efficiency and reliability of these analytical techniques.

Production, characterization, and application of zein-polyphenol complexes and conjugates: A comprehensive review

The corn protein zein has several advantages, such as low production cost, excellent biodegradability, good biocompatibility, and low allergenicity. However, the application of zein in the food industry is limited by its high hydrophobicity. To increase the functionality of zein and meet the diverse requirements of food systems, researchers have explored several methods to form complexes or conjugates through noncovalent or covalent interactions, respectively, with polyphenols. This paper comprehensively reviews the formation mechanisms, preparation methods, and influencing factors of zein-polyphenol complexes and conjugates. In addition, the paper presents the techniques used to characterize zein-polyphenol complexes and conjugates and their various new functional properties and bioactivities including water solubility, emulsification activity, in vitro antioxidant activity and antibacterial activity, as well as factors that affect these properties. Furthermore, the potential uses of these compounds in the food sector and future research areas are discussed.

Development of barley proteins into peptides nanomicelles for encapsulation of hydrophobic bioactive ingredient

BACKGROUND

As natural polymer materials, barley proteins have been utilized to fabricate nanocarriers to encapsulate and delivery hydrophobic bioactive ingredients. However, as a result of the high proportion of hydrophobic amino acids and structural rigidity, barley protein-based nanocarriers tend to aggregate easily and have a low loading capacity, which greatly limits their application. In the present study, barley proteins were enzymolyzed to fabricate nanomicelles and then applied to encapsulate hydrophobic bioactive ingredient.

RESULTS

Self-assembled barley peptides could be obtained by controllable enzymolysis of barley proteins. The obtained barley peptides could self-assemble into nanomicelles (BPNMs) with a diameter of approximately 90 nm when the concentration was > 2.1 μg mL-1. Hydrophobic interaction, disulfide bonds and hydrogen bonds were involved in maintaining the structure of BPNMs. Six self-assembled peptides (QQPFPQ, QTPLPQ, QLPQIPE, QPFPQQPQLPH, QPFPQQPPFGL and QPFPQQPPFWQQQ) were identified and they were characterized by alternating arrangement of hydrophobic amino acids and hydrophilic amino acids. Moreover, BPNMs were utilized to encapsulate hydrophobic bioactive ingredient quercetin. When quercetin was encapsulated by BPNMs, its water solubility was significantly increased, being approximately 30-fold higher than free quercetin. Meanwhile, encapsulation of BPNMs could greatly increase quercetin stability. The interaction between BPNMs and quercetin occurred spontaneously, mainly driven by van der Waals forces and hydrogen bonds.

CONCLUSION

In the present study, BPNMs were successfully developed and could be used as a promising delivery system to improve the water solubility and stability of hydrophobic bioactive ingredients. © 2024 Society of Chemical Industry.

Encapsulation of caffeic acid phenethyl ester by self-assembled sorghum peptide nanoparticles: Fabrication, storage stability and interaction mechanisms

Caffeic acid phenethyl ester (CAPE) is a naturally occurring phenolic compound with various biological activities. However, poor water solubility and storage stability limit its application. In this context, sorghum peptides were used to encapsulate CAPE. Sorghum peptides could self-assemble into regularly spherical nanoparticles (SPNs) by hydrophobic interaction and hydrogen bonds. Solubility of encapsulated CAPE was greatly increased, with 9.44 times higher than unencapsulated CAPE in water. Moreover, the storage stability of CAPE in aqueous solution was significantly improved by SPNs encapsulation. In vitro release study indicated that SPNs were able to delay CAPE release during the process of gastrointestinal digestion. Besides, fluorescence quenching analysis showed that a static quenching existed between SPNs and CAPE. The interaction between CAPE and SPNs occurred spontaneously, mainly driven by hydrophobic interactions. The above results suggested that SPNs encapsulation was an effective approach to improve the water solubility and storage stability of CAPE.

Fabrication and characterization of novel prolamin nanoparticle-filled starch gels incorporating resveratrol

This study aimed to improve the mechanical properties of wheat starch gels (WSG) and the stability and bioaccessibility of resveratrol (Res) in prolamin nanoparticles. Res-loaded gliadin (Gli), zein, deamidated gliadin (DG) and deamidated zein (DZ) nanoparticles were filled in WSG. The hardness, G' and G'' of WSG were notably increased. It can be attributed to the more ordered and stable structure induced by the interaction of prolamin nanoparticles and starch. The Res retention of nanoparticles and nanoparticle-filled starch gels was at least 24.6 % and 36.0 % higher than free Res upon heating. When exposed to ultraviolet, the Res retention was enhanced by over 6.1 % and 37.5 %. The in-vitro digestion demonstrated that the Res releasing percentage for nanoparticle-filled starch gels was 25.8 %-38.7 % lower than nanoparticles in the simulated stomach, and more Res was released in the simulated intestine. This resulted in a higher bioaccessibility of 82.1 %-93.2 %. The bioaccessibility of Res in Gli/Res/WSG and DG/Res/WSG was greater than that of Zein/Res/WSG and DZ/Res/WSG. More hydrophobic interactions occurred between Res and Gli, DG. The interactions between Res and zein, DZ were mainly hydrogen bonding. The microstructure showed that nanoparticles exhibited dense spherical structures and were uniformly embedded in the pores of starch gels.

The mechanism of epigallocatechin-3-gallate inhibiting the antigenicity of β-lactoglobulin under pH 6.2, 7.4 and 8.2: Multi-spectroscopy and molecular simulation methods

The antigenicity of β-lactoglobulin (β-LG) can be influenced by pH values and reduced by epigallocatechin-3-gallate (EGCG). However, a detailed mechanism concerning EGCG decreasing the antigenicity of β-LG at different pH levels lacks clarity. Here, we explore the inhibition mechanism of EGCG on the antigenicity of β-LG at pH 6.2, 7.4 and 8.2 using enzyme-linked immunosorbent assay, multi-spectroscopy, mass spectrometry and molecular simulations. The results of Fourier transform infrared spectroscopy (FTIR) and circular dichroism (CD) elucidate that the noncovalent binding of EGCG with β-LG induces variations in the secondary structure and conformations of β-LG. Moreover, EGCG inhibits the antigenicity of β-LG the most at pH 7.4 (98.30 %), followed by pH 6.2 (73.18 %) and pH 8.2 (36.24 %). The inhibitory difference is attributed to the disparity in the number of epitopes involved in the interacting regions of EGCG and β-LG. Our findings suggest that manipulating pH conditions may enhance the effectiveness of antigenic inhibitors, with the potential for further application in the food industry.

Computer-assisted discovery and evaluation of potential ribosomal protein S6 kinase beta 2 inhibitors

S6K2 is an important protein in mTOR signaling pathway and cancer. To identify potential S6K2 inhibitors for mTOR pathway treatment, a virtual screening of 1,575,957 active molecules was performed using PLANET, AutoDock GPU, and AutoDock Vina, with their classification abilities compared. The MM/PB(GB)SA method was used to identify four compounds with the strongest binding energies. These compounds were further investigated using molecular dynamics (MD) simulations to understand the properties of the S6K2/ligand complex. Due to a lack of available 3D structures of S6K2, OmegaFold served as a reliable 3D predictive model with higher evaluation scores in SAVES v6.0 than AlphaFold, AlphaFold2, and RoseTTAFold2. The 150 ns MD simulation revealed that the S6K2 structure in aqueous solvation experienced compression during conformational relaxation and encountered potential energy traps of about 19.6 kJ mol-1. The virtual screening results indicated that Lys75 and Lys99 in S6K2 are key binding sites in the binding cavity. Additionally, MD simulations revealed that the ligands remained attached to the activation cavity of S6K2. Among the compounds, compound 1 induced restrictive dissociation of S6K2 in the presence of a flexible region, compound 8 achieved strong stability through hydrogen bonding with Lys99, compound 9 caused S6K2 tightening, and the binding of compound 16 was heavily influenced by hydrophobic interactions. This study suggests that these four potential inhibitors with different mechanisms of action could provide potential therapeutic options.

Caffeic Acid Phenethyl Ester Encapsulated in Self-Assemble Rice Peptides Nanoparticles: Storage Stability, In Vitro Release, and Their Interaction Mechanisms

Caffeic acid phenethyl ester (CAPE) is an important active component of propolis with many bioactivities. However, its efficiency and practical application are restricted due to its poor aqueous solubility and storage stability. In this study, a nanocarrier was fabricated to encapsulate CAPE using self-assembled rice peptides obtained by controllable enzymolysis. The physicochemical properties, encapsulation efficiency, and loading capacity of rice peptides nanoparticles (RPNs) were characterized. The storage stability, in vitro release, and interaction mechanisms between CAPE and RPNs were investigated. The results showed that RPNs, mainly assembled by disulfide bonds and hydrogen bonds, possessed an effective diameter of around 210 nm and a high encapsulation efficiency (77.77%) and loading capacity (3.89%). Importantly, the water solubility of CAPE was increased by 45 times after RPNs encapsulation. Moreover, RPNs encapsulation also significantly increased CAPE stability, about 1.4-fold higher than that of unencapsulated CAPE after 18-day storage. An in vitro release study demonstrated that RPNs could delay the release of CAPE, implying a better CAPE protection against extreme environments during digestion. Hydrogen bond and van der Waals force are the predominant interaction forces between RPNs and CAPE. Therefore, the newly developed nanoparticle is a potential delivery system that could effectively improve the aqueous solubility and stability of CAPE.

Deciphering the interaction mechanism and binding mode between chickpea protein isolate and flavonoids based on experimental studies and molecular simulation

Chickpea protein isolate (CPI) is a promising novel plant protein, and protein-flavonoid system has also been applied in various food products. However, the interaction mechanism between CPI and flavonoids remains to be elucidated. In this paper, the affinity behavior between flavonoids and CPI was explained by constructing the three-dimensional quantitative structure-activity relationship (R2 = 0.988, Q2 = 0.777). Subsequently, four representative flavonoids were selected for further study. Multi-spectroscopy analysis showed that the sequence of affinity for CPI was puerarin > apigenin > naringenin > epigallocatechin gallate. Meanwhile, flavonoids altered the secondary structure and spatial conformation of CPI, leading to the static quenching of CPI. Additionally, thermodynamic analysis indicated that hydrogen bonding and van der Waals forces were the main driving forces for complex binding. Molecular docking and molecular dynamics simulations further explored the binding sites and conformations of complexes. This study provides theoretical guidance for in-depth research on the interaction patterns between biomacromolecules and small molecules in food matrices.

Rapid microwave synthesis of N and S dual-doped carbon quantum dots for natamycin determination based on fluorescence switch-off assay

Green, one-pot, quick, and easily synthesized nitrogen and sulfur co-doped carbon quantum dots (N,S-CDs) were obtained from cheap and readily available chemicals (sucrose, urea, and thiourea) using a microwave-assisted approach in about 4 min and utilized as a turn-off fluorescent sensor for estimation of natamycin (NAT). First, the effect of N and S doping on the microwave-synthesized CDs' quantum yield was carefully studied. CDs derived from sucrose alone failed to produce a high quantum yield; then, to increase the quantum yield, doping with heteroatoms was carried out using either urea or thiourea. A slight increase in quantum yield was observed upon using thiourea with sucrose, while an obvious enhancement of quantum yield was obtained when urea was used instead of thiourea. Surprisingly, using a combination of urea and thiourea together results in N,S-CDs with the highest quantum yield (53.5%), uniform and small particle size distribution, and extended stability. The fluorescent signal of N,S-CDs was quenched upon addition of NAT due to inner filter effect and static quenching in a manner that allowed for quantitative determination of NAT over a range of 0.5-10.0μg ml-1(LOD = 0.10μg ml-1). The N,S-CDs were applicable for determination of NAT in aqueous humor, eye drops, different environmental water samples, and bread with excellent performance. The selectivity study indicated excellent selectivity of the prepared N,S-CDs toward NAT with little interference from possibly interfering substances. In-silico toxicological evaluation of NAT was conducted to estimate its long-term toxicity and drug-drug interactions. Finally, the preparation of N,S-CDs, and analytical procedure compliance with the green chemistry principles were confirmed by two greenness assessment tools.

Exploration of molecular interaction between different plant proteins and 2-pentylfuran: based on multiple spectroscopy and molecular docking

BACKGROUND

Soy protein, peanut protein and wheat protein are commonly applied in plant-based products, but specific off-odor makes it difficult for consumers to accept, with 2-pentylfuran being one of the most representative flavors. In this study, 2-pentylfuran was employed as an example to explore the behavior and mechanism of the three proteins in absorbing off-odors.

RESULTS

Gas chromatographic-mass spectrometric analysis indicated that different plant proteins were able to adsorb 2-pentylfuran. Circular dichroism proved 2-pentylfuran could drive the α-helix to β-sheet transition of soy protein, which was not obvious in peanut protein or wheat protein. Ultraviolet spectroscopy tentatively determined that 2-pentylfuran caused changes in the tyrosine and tryptophan microenvironments of different plant proteins, which were further evidenced by synchronous fluorescence at fixed wavelength intervals of 15 nm and 60 nm. Static quenching of protein intrinsic fluorescence indicated that they formed a stable complex with 2-pentylfuran, except for wheat protein (dynamic quenching).

CONCLUSION

The various conformations of the three proteins are the main reason for the difference in flavor retention of protein. Soy protein, peanut protein and wheat protein adsorbing 2-pentylfuran relies on non-covalent forces, especially hydrophobic interactions, maintained between the protein and 2-pentylfuran. © 2023 Society of Chemical Industry.

Fabrication of colloidal stable gliadin-casein nanoparticles for the encapsulation of natamycin: Molecular interactions and antifungal application on cherry tomato

Natamycin was encapsulated in gliadin-casein nanoparticles (G-C NPs) to control black rot in cherry tomato against Alternaria alternata. The G-C NPs with a mean particle diameter of 211 ± 4 nm were prepared using an anti-solvent method. The composite NPs showed better stability against neutral pH, ion, and storage than gliadin NPs. The quenching of gliadin by natamycin was static with a constant of 5.99 × 10^-12 M^-1∙S^-1, and was spontaneous with a free energy of -23.5 kJ∙M^-1 at 298 K. Both hydrophobic stacking and hydrogen bonds between natamycin and gliadin were found as the major driven force in the formation of the complex. The NPs kept the antifungal activity of natamycin with improved photostability. The NPs coatings exhibited better results than natamycin in controlling black rot on cherry tomato. This study shows the potential of the G-C NPs as all-natural delivery systems for natamycin in post-harvest treatments.

The Binding Ability of Mercury (Hg) to Photosystem I and II Explained the Difference in Its Toxicity on the Two Photosystems of Chlorella pyrenoidosa

Mercury (Hg) poses high toxicity to organisms including algae. Studies showed that the growth and photosynthesis of green algae such as Chlorella are vulnerable to Hg stress. However, the differences between the activities and tolerance of photosystem I and II (PSI and PSII) of green microalgae under Hg exposure are still little known. Responses of quantum yields and electron transport rates (ETRs) of PSI and PSII of Chlorella pyrenoidosa to 0.05−1 mg/L Hg2+ were simultaneously measured for the first time by using the Dual-PAM-100 system. The photosystems were isolated to analyze the characteristics of toxicity of Hg during the binding process. The inhibition of Hg2+ on growth and photosystems was found. PSII was more seriously affected by Hg2+ than PSI. After Hg2+ exposure, the photochemical quantum yield of PSII [Y(II)] decreased with the increase in non-photochemical fluorescence quenching [Y(NO) and Y(NPQ)]. The toxic effects of Hg on the photochemical quantum yield and ETR in PSI were lower than those of PSII. The stimulation of cyclic electron yield (CEF) was essential for the stability and protection of PSI under Hg stress and played an important role in the induction of non-photochemical quenching (NPQ). The results showed a strong combination ability of Hg ions and photosystem particles. The number of the binding sites (n) of Hg on PSII was more than that of PSI, which may explain the different toxicity of Hg on PSII and PSI.

Cadmium Caused Different Toxicity to Photosystem I and Photosystem II of Freshwater Unicellular Algae Chlorella pyrenoidosa (Chlorophyta)

Heavy metals such as Cd pose environmental problems and threats to a variety of organisms. The effects of cadmium (Cd) on the growth and activities of photosystem I (PSI) and photosystem II (PSII) of Chlorella pyrenoidosa were studied. The growth rate of cells treated with 25 and 100 µM of Cd for longer than 48 h were significantly lower than the control, accompanying with the inhibition of photosynthesis. The result of quantum yields and electron transport rates (ETRs) in PSI and PSII showed that Cd had a more serious inhibition on PSII than on PSI. Cd decreased the efficiency of PSII to use the energy under high light with increasing Cd concentration. In contrast, the quantum yield of PSI did not show a significant difference among different Cd treatments. The activation of cyclic electron flow (CEF) and the inhibition of linear electron flow (LEF) due to Cd treatment were observed. The photochemical quantum yield of PSI and the tolerance of ETR of PSI to Cd treatments were due to the activation of CEF around PSI. The activation of CEF also played an important role in induction of non-photochemical quenching (NPQ). The binding features of Cd ions and photosystem particles showed that Cd was easier to combine with PSII than PSI, which may explain the different toxicity of Cd on PSII and PSI.

Interaction characterization of zein with cyanidin-3-O-glucoside and its effect on the stability of mulberry anthocyanins and protein digestion

Ingredient interactions usually occur in food matrix, which may affect their functions and properties. This study aimed to investigate the interactive effects of mulberry and corn protein on pigment stability and zein digestibility. The interaction of main compounds in both ingredients, that is, cyanidin-3-O-glucoside (C3G) and zein, was characterized via their structural, morphological, thermal stability, and digestible properties using multi-spectroscopic techniques, scanning electron microscopy, high performance liquid chromatography, and in vitro digestion models. Results showed that zein exhibited a strong binding affinity for C3G via van der Waals forces and hydrogen bonds determined in fluorescence assays. The secondary structure of zein changed due to C3G binding, with a decrease in α-helix and an increase in β-sheet. The particle size of zein decreased after interacting with C3G. The zein complexation with mulberry anthocyanin-rich extracts in a simulative food system did not affect the digestibility of zein significantly but enhanced the thermal stability of pigments slightly. Specifically, anthocyanins did not change the susceptibility of zein to pepsin proteolysis, suggesting that binding sites of C3G might not be the cleavage sites of pepsins. These results provide important insight into the binding mechanism of zein and anthocyanins and might help guide the design of anthocyanin-based functional food. PRACTICAL APPLICATION: Zein, as a storage protein widely distributed in corn flour, was commonly co-existing with anthocyanins in starchy food. This study provides insights into the molecular interactions between zein and cyanidin-3-O-glucoside. However, the interaction might not impact the zein digestion but enhance anthocyanin thermal stability. The findings of this work could throw light on the selection of ingredients rich in zein and anthocyanins in the food industry.

Formononetin/methyl-β-cyclodextrin inclusion complex incorporated into electrospun polyvinyl-alcohol nanofibers: Enhanced water solubility and oral fast-dissolving property

Improving solubility and administration route of isoflavone formononetin (FMN) are critical factors to improve its bioavailability in the oral cavity. This study fabricated fast-dissolving nanofibers containing FMN/methyl-β-cyclodextrin (FMN/Me-β-CD) inclusion complex. The solubility of FMN could be increased by approximately 50 times at 20 mM aqueous Me-β-CD. Interactions and thermodynamic parameters of the host-guest inclusion complex were studied by a fluorescence quenching method. The structure and mechanisms of the complex were further studied by molecular docking and molecular dynamics. Finally, polyvinyl-alcohol (PVA) nanofibrous webs containing the FMN/Me-β-CD inclusion complex were fabricated by electrospinning. The dissolution test demonstrated that the FMN/Me-β-CD/PVA nanofibers can be dissolved in artificial saliva within approximately 2 s. This study shows the potential of Me-β-CD inclusion and electrospinning to improve solubility and administration route of isoflavones.