Synthesis and photophysical investigation of (BTHN) Schiff base as off-on Cd2+ fluorescent chemosensor and its live cell imaging

Heterocyclic fluorescent Schiff base chemosensors for the detection of Fe(III) and Cu(II) ions

Two new Schiff bases were synthesized from 1-(2,4-dihydroxyphenyl)ethanone and pyridine derivatives. Both compounds were characterized using infrared, UV-Vis., 1H NMR, 13C NMR and mass spectral studies. Density functional theory (DFT) calculations were performed for both the Schiff bases with 6-31G(d, p) as the basis set. Vibrational frequencies calculated using the theoretical method were in good agreement with the experimental values. Both the Schiff bases were highly fluorescent in nature. The cation-recognizing profile of the compounds was investigated in aqueous methanol medium. The Schiff base 4-(1-(pyridin-4-ylimino)ethyl)benzene-1,3-diol (PYEB) was found to interact with Fe(III) and Cu(II) ions, whereas the Schiff base 4,4'-((pyridine-2,3-diylbis(azanylylidene))bis(ethan-1-yl-1-ylidene))bis(benzene-1,3-diol) (PDEB) was found to detect Cu(II) ions. The mechanism of recognition was established as combined excited state intramolecular proton transfer (ESIPT)-chelation-enhanced fluorescence (CHEF) effect and chelation-enhanced quenching (CHEQ) process for the detection of Fe(III) and Cu(II) ions, respectively. The stability constant of the metal complexes formed during the sensing process was determined. The limit of detection for Fe(III) and Cu(II) ions with respect to Schiff base PYEB was found to be 1.64 × 10-6 and 2.16 × 10-7 M, respectively. With respect to Schiff base PDEB, the limit of detection for Cu(II) ion was found to be 4.54 × 10-4 M. The Cu(II) ion sensing property of the Schiff base PDEB was applied in bioimaging studies for the detection of HeLa cells.

New fluorescent Schiff base modified nanocellulose-based chemosensors for the selective detection of Fe3+, Zn2+ and Cu2+ in semi-aqueous media and application in seawater sample

Stimulus-responsive fluorescent-modified biopolymers have received significant attention in the field of chemosensors. Herein, four new fluorescent dyes, namely, S1: (PDA-DANC), S2: (SAL-PDA-DANC), S3: (BrSAL-PDA-DANC) and S4: (ClSAL-PDA-DANC) have been successfully synthesized from 2,3-dialdehyde nanocellulose (DANC) for the detection of heavy metals. The microstructural and photophysical properties of nanocellulose (NC), microcrystalline cellulose (DANC) and the synthesized S1 to S4 dyes were investigated by FT-IR, SEM-EDX, XRD, TGA, DLS and photoluminescence. NC, obtained from conversion of MCC, shows an average size of 802.4 nm with 0.141 of polydispersity index (PdI), and a crystalline index (CI) of 82.40 % and crystallite size of 4.68 nm. The synthesized dyes present good fluorescent properties and have been therefore exploited for developing new probes for heavy metal ions detection. Remarkable "turn off" and/or "turn on" behaviors with Fe3+ and Cu2+ and with Zn2+ in DMF/water solution have been demonstrated, allowing the sensitive and selective determination of these heavy metal ions with a low limit of detection (LOD). Finally, the evaluation of the Fe3+ sensing in a real seawater sample was investigated.

Easily synthesizable molecular probe for the nanomolar level detection of Cd2+ in near aqueous media: Theoretical investigations and live cell imaging

The present investigation highlights a quinoline-based small molecule probe (DEQ) for the detection of Cd2+ among other metal ions in near-aqueous media. The probe DEQ and its Cd2+ complex (DEQ-Cd) have been synthesized and characterized by all possible spectroscopic methods. The weakly emissive DEQ showed its strong emission in the presence of Cd2+, which is attributed to the photoinduced electron transfer (PET) along with the chelation-enhanced fluorescence (CHEF) mechanism. The 1:1 binding mode between ligand and Cd2+ is confirmed by single crystal XRD analysis, which is further supported by Job's plot and HRMS. The detection limit of the probe to recognize Cd2+ was found to be as low as 89 nM. Furthermore, DEQ can act as a reversible fluorescence probe with the off-on-off mechanism by the alternative addition of Cd2+ and EDTA. DFT and TD-DFT studies exposed the proposed mechanism after Cd2+ insertion and the obtained results for electronic spectra are in line with the experimental results. The response towards pH was quite interesting and allowed us to study its application in live cell imaging. With all the positive results, the proposed ligand DEQ can be used as a potential probe for the detection of Cd2+ in real-life applications.

Unusual reaction of (E)-2-[(benzo[d]thia-zol-2-yl-imino)-meth-yl]-5-(di-ethyl-amino)-phenol with tri-phenyl-borane: crystal structures and optical properties

The mol-ecular and crystal structure of (E)-2-[(benzo[d]thia-zol-2-yl-imino)-meth-yl]-5-(di-ethyl-amino)-phenol (C18H19N3O2S, Et2N-Bz) and its unexpected reaction product with tri-phenyl-borane, 2,2-diphenyl-1,3-dioxa-2-borata-1,2-di-hydro-naphthalene [systematic name: N,N-diethyl-2,2-diphenyl-2H-1,3λ3,2λ4-ben-zodioxaborinin-7-amine, C23H24BNO2, (I)] are described. For Et2N-Bz, the hydroxyl group is involved in an intra-molecular hydrogen bond with the imino nitro-gen atom and the C=N bond displays an E configuration. The crystal packing is characterized by layers of inversion dimers parallel to the (10) plane and chains of mol-ecule in the a-axis direction formed through C-H⋯O inter-actions. Complex (I) crystallizes with two mol-ecules (A and B) in the asymmetric unit, which differ in the orientation of the ethyl groups. The 1,3-dioxa-2-borata-1,2,3,4-tetra-hydro-naphthalene ring displays a slight envelope conformation with the boron atom as the flap. In the crystal packing, chains of alternating A and B mol-ecules formed by C-H⋯O hydrogen bonds run in the b-axis direction. The UV-vis absorption and emission properties of the compounds are discussed and their aggregation-induced emission properties are further investigated.

A reversible and ratiometric fluorescent probe based on rhodol derivative with an ESIPT unit for monitoring copper ion content and in situ evaluation of related drugs in cells

The amount of copper ions in the environment has an immediate effect on ecology and food safety, Menkes syndrome and Wilson's disease cause accumulation and deficiency of copper ions in the body, respectively, and neurodegenerative diseases are also closely related to copper ion levels. However, the current copper ion detection technology has a high cost, complex operation, and other disadvantages. In this study, a ratiometric fluorescent probe (RB-DH) was rationally constructed to detect copper ions by coupling benzothiazole to rhodol derivatives. It can be used to determine copper ion concentrations in water samples, agricultural products, cells, and zebrafish. Importantly, due to the reversible response of RB-DH to copper ions, the fluctuation of intracellular copper ion content during the release of copper ion-related drugs (Copper gluconate and D-penicillamine) was successfully monitored with RB-DH for the first time. This study demonstrates RB-DH's potential application in the evaluation of related drug release effects and serves as a guide for the establishment of portable detection techniques for other important substances.

A novel fluorescence probe for the recognition of Cd2+ and its application

A facile fluorescence probe BQBH was synthesized and investigated on its spectrum property. The result showed that the BQBH had high sensitivity and selectivity for Cd²⁺ with lowest detection determined as 0.14 μM by fluorescence response. The 1: 1 binding ratio between BQBH and Cd²⁺ was determined by Job's plot, and the binding details were further confirmed by ¹H NMR titration, FT-IR spectrum and HRMS analysis. The applications including on test paper, smart phone and cell image were all also investigated.

Recent Advances in Silicon Quantum Dot-Based Fluorescent Biosensors

With the development of nanotechnology, fluorescent silicon nanomaterials have been synthesized and applied in various areas. Among them, silicon quantum dots (SiQDs) are a new class of zero-dimensional nanomaterials with outstanding optical properties, benign biocompatibility, and ultra-small size. In recent years, SiQDs have been gradually utilized for constructing high-performance fluorescent sensors for chemical or biological analytes. Herein, we focus on reviewing recent advances in SiQD-based fluorescent biosensors from a broad perspective and discussing possible future trends. First, the representative progress for synthesizing water-soluble SiQDs in the past decade is systematically summarized. Then, the latest achievement of the design and fabrication of SiQD-based fluorescent biosensors is introduced, with a particular focus on analyte-induced photoluminescence (fluorescence) changes, hybrids of SiQDs with other materials or molecules, and biological ligand-modification methods. Finally, the current challenges and prospects of this field are highlighted.

Schiff Bases: A Versatile Fluorescence Probe in Sensing Cations

Metal cations such as Zn²⁺, Al³⁺, Hg²⁺, Cd²⁺, Sn²⁺, Fe²⁺, Fe³⁺ and Cu²⁺ play important roles in biology, medicine, and the environment. However, when these are not maintained in proper concentration, they can be lethal to life. Therefore, selective sensing of metal cations is of great importance in understanding various metabolic processes, disease diagnosis, checking the purity of environmental samples, and detecting toxic analytes. Schiff base probes have been largely used in designing fluorescent sensors for sensing metal ions because of their easy processing, availability, fast response time, and low detection limit. Herein, an in-depth report on metal ions recognition by some Schiff base fluorescent sensors, their sensing mechanism, their practical applicability in cell imaging, building logic gates, and analysis of real-life samples has been presented. The metal ions having biological, industrial, and environmental significance are targeted. The compiled information is expected to prove beneficial in designing and synthesis of the related Schiff base fluorescent sensors.

A Fluorescent Probe Based on the Hydrazone Schiff Base for the Detection of Zn2+ and its Application on Test Strips

A novel fluorescent probe SHK for Zn²⁺ detection was designed based on the hydrazone Schiff base, successfully synthesized by Suzuki coupling and condensation reactions. The probe SHK in DMSO/H₂O showed extremely weak fluorescence. However, the solution exhibited an intensive yellow-green emission with the introduction of Zn²⁺. In contrast, negligible fluorescence change was observed when other metal ions were added, suggesting a high selectivity of SHK for Zn²⁺ detection. The Job's Plot analysis revealed that a 1:1 stoichiometric adduct SHK-Zn²⁺ formed during the Zn²⁺ sensing. The binding constant of the complex was determined to be 184 M^- 1, and the detection limit for Zn²⁺ was calculated to be 112 µM. Moreover, the probe SHK achieved selective fluorescence sensing for Zn²⁺ on test strips, which guaranteed its practical application prospect.

Ratiometric Fluorescent Sensor Based on Tb(III) Functionalized Metal-Organic Framework for Formic Acid

Formic acid is a common chemical raw material, the effective detection of which is of importance to food safety and environmental quality. In this work, the lanthanide functionalized dual-emission metal-organic framework (TH25) was prepared as a ratiometric fluorescent sensor for formic acid. This ratiometric sensor has a good detection performance with high selectivity, sensitivity, and reproducibility. Together with a low limit of detection of 2.1 ppm, these characters promise the ability to sense at low levels as well as a practical detection ability. This work provides ideas for the design and synthesis of effective chemical sensors for organic acids.

An NBD-based fluorescent and colorimetric chemosensor for detecting S2-: Practical application to zebrafish and water samples

A novel 7-nitro-1,2,3-benzoxadiazole (NBD)-based chemosensor BOP ((5-bromopyridin-2-yl)(4-(7-nitrobenzo[c][1,2,5]oxadiazol-4-yl)piperazin-1-yl)methanone) was synthesized. BOP could detect S^2- through fluorescent quenching and colorimetric change. The detection limit was calculated to be 10.9 µM through fluorescence titration. The reaction mechanism of BOP towards S^2- was estimated to be thiolysis of NBD amine, producing the cleavage products, NBD-S^- and BP ((5-bromopyridin-2-yl)(piperazin-1-yl)methanone). The thiolysis was demonstrated by ¹H NMR titrations, ESI-mass analysis and theoretical calculations. Importantly, BOP was able to successfully monitor S^2- in zebrafish and water samples. Additionally, test strips coated with BOP were applied to the in-the-field measurements of S^2-.

An efficient 2-aminothiazolesalicylaldehyde fluorescent chemosensor for Fe2+ ion detection and a potential inhibitor of NUDT5 signaling hormone for breast cancer cell and molecular keypad lock application

A novel thiazole phenol conjugate, 2-aminothiazolesalicylaldehyde (receptor1) was designed and synthesized for the first time through a single step process via Schiff base condensation reaction. The formation of receptor1 was confirmed by FTIR, ¹³C NMR, and ¹H NMR. The IR spectra confirmed the presence of the aldimine formation. It is further supported by the proton NMR, showing the disappearance of aldehyde peaks and the formation of a new imine peak. This is further corroborated by the ¹³C NMR. The receptor1 complexing with various metal ions were studied through fluorescence spectroscopy showed its selectivity toward Fe²⁺ ion following a reverse photoinduced electron transfer (PET) process compared to all other potentially competing ions. The receptor1 was applied as a sensor to sense Fe²⁺ ion in water samples. The detection limit for Fe²⁺ ion in drinking water was substantially lower (0.003 µM) than the EPA (environmental protection agency) recommendation (5.37 M). The capability of receptor1 in recovering Fe²⁺ ion in bore water, tap water, and drinking water was up to 99.5%. The receptor1 was also used as a chelating ligand (receptor1) in molecular docking and it was assessed as a potential inhibitor of NUDT5, a silence hormone signaling for breast cancer. The test compound (PDB: 5NWH) showed good affinity toward the target receptor1 with the binding energy of – 5.23 kcal mol⁻¹. Furthermore, the receptor1 showed excellent reversibility property on adding EDTA solution. Due to the marvelous reversible property, a molecular-scale sequential information processing circuit is designed for the multi-task behavior such as ‘Writing-Reading-Erasing-Reading’ in the form of binary logic gate. The consecutive addition of Fe²⁺ ion and EDTA solution to receptor1 paves a way for the construction of INHIBIT logic gate. Additionally, the receptor1 showed the mimicking behavior of molecular keypad lock.

Interaction of TX-100 and Antidepressant Imipramine Hydrochloride Drug Mixture: Surface Tension, 1H NMR, and FT-IR Investigation

Interfacial interaction amongst the antidepressant drug-imipramine hydrochloride (IMP) and pharmaceutical excipient (triton X-100 (TX-100-nonionic surfactant)) mixed system of five various ratios in dissimilar media (H₂O/50 mmol·kg⁻¹ NaCl/250 mmol·kg⁻¹ urea) was investigated through the surface tension method. In addition, in the aqueous solution, the ¹H-NMR, as well as FT-IR studies of the studied pure and mixed system were also explored and deliberated thoroughly. In NaCl media, properties of pure/mixed interfacial surfaces enhanced as compared with the aqueous system, and consequently the synergism/attractive interaction among constituents (IMP and TX-100) grew, whereas in urea (U) media a reverse effect was detected. Surface excess concentration (Γ_max), composition of surfactant at mixed monolayer (X1σ), activity coefficient (f₁^σ (TX-100) and f₂^σ (IMP)), etc. were determined and discussed thoroughly. At mixed interfacial surfaces interaction, parameter (β^σ) reveals the attractive/synergism among the components. The Gibbs energy of adsorption (ΔGadso) value attained was negative throughout all employed media viewing the spontaneity of the adsorption process. The ¹H NMR spectroscopy was also employed to examine the molecular interaction of IMP and TX-100 in an aqueous system. FT-IR method as well illustrated the interaction amongst the component. The findings of the current study proposed that TX-100 surfactant could act as an efficient drug delivery vehicle for an antidepressant drug. Gels can be used as drug dosage forms due to recent improvements in the design of surfactant systems. Release mechanism of drugs from surfactant/polymer gels is dependent upon the microstructures of the gels and the state of the drugs within the system.

Synthesis, “turn-on” fluorescence signals towards Zn2+ and Hg2+ and monoamine oxidase A inhibitory activity using a molecular docking approach of morpholine analogue Schiff base linked organosilanes

A new set of morpholine analogue Schiff base linked organosilanes (5a–5c) was prepared.

Multi-step Synthesis, Characterization and Photophysical Investigation of Novel Biologically Active Heterocyclic Chalcone (AECO)

Novel alkylated heterocyclic chalcone (E)-1-(2-(allyloxy)phenyl)-3-(9-ethyl-9H-carbazol-3-yl)prop-2-en-1-one (AECO) with extended π-bond was prepared by the multi-steps synthesis. The structure of the AECO was established by the spectroscopic technics and purity of the compound was confirmed by the elemental analysis. Physicochemical parameters of the AECO such as molar absorption coefficient, transition dipole moments, stokes shift, oscillator strength and fluorescence quantum yield were calculated in ten various solvents on the basis of polarity of the solvents to see the effect of the solvent with AECO. Interaction of the AECO chromophore with cationic CTAB and anionic SDS surfactants were determined by using the fluorescence spectroscopy techniques. The intensity of the florescence spectrum increase with increasing the concentrations of surfactants. This suggests that strong interaction occurs between AECO with surfactants and this interaction arise from electrostatic forces. So, AECO chromophore could be used as analysis to define the Critical Micelle Concentration (CMC) of the surfactants. In addition the in-vitro antibacterial active of novel heterocyclic chalcone agents four bacteria's strain were evaluated and result showed AECO is beater antibacterial agent against Gram-Negative Bacteria (E. coli and S. flexneri) as compare to the Gram Negative Bacteria with respected to the standard drug Tetracycline.

Microwave assisted one-pot synthesis, photophysical and physicochemical studies of novel biologically active heterocyclic Donor (D)-π-Acceptor (A) chromophore

A donor-π-acceptor (D-π-A) chromophore, 2-amino-4-(9-ethyl-9H-carbazol-3-yl)-8-methoxy-5,6-dihydrobenzo[h]quinoline-3-carbonitrile (AEDQ) was synthesized from the condensation of 6-methoxy-3,4-dihydronaphthalen-1(2H)-one, 9-ethyl-9H-carbazole-3-carbaldehyde, malononitrile and NH₄OAc in ethanol. Spectroscopic techniques and elemental analysis were employed to establish the structure of AEDQ. Photophysical parameters and fluorescence quantum yield were calculated in the different polarity solvents to evaluate the interactions of the solvent with AEDQ chromophore. Further, the interaction of the AEDQ with cationic and anionic surfactants (CTAB, SDS) were also evaluated by using fluorescence spectroscopy techniques. The intensity of the fluorescence spectrum increased as the concentration of surfactants increased, suggesting that strong interaction occurs between AEDQ with surfactants, and this interaction arises from electrostatic forces. As a result, the AEDQ chromophore could be used to determine the CMC of surfactants. The disc diffusion and minimal inhibitory concentration (MIC) technique were used to test in-vitro antibacterial activity against Gram +ve and Gram -ve bacteria, and the results are compared with the standard drug, tetracycline. AEDQ also showed good ADMET, pharmacokinetics and drug-likeness properties, which are desirable for a good drug candidate. The molecule also fits well in the DNA gyrase A active pocket site with the binding free energy of -17.92 kcal/mol, which testifies its good antibacterial activity.

Heterocyclic Schiff Bases of 3-Aminobenzanthrone and Their Reduced Analogues: Synthesis, Properties and Spectroscopy

New substituted azomethines of benzanthrone with heterocyclic substituents were synthesized by condensation reaction of 3-aminobenzo[de]anthracen-7-one with appropriate aromatic aldehydes. The resulting imines were reduced with sodium borohydride to the corresponding amines, the luminescence of which is more pronounced in comparison with the initial azomethines. The novel benzanthrone derivatives were characterized by NMR, IR, MS, UV/Vis, and fluorescence spectroscopy. The structure of three dyes was studied by the X-ray single crystal structure analysis. The solvent effect on photophysical behaviors of synthesized imines and amines was investigated. The obtained compounds absorb at 420–525 nm, have relatively large Stokes shifts (up to 150 nm in ethanol), and emit at 500–660 nm. The results testify that emission of the studied compounds is sensitive to the solvent polarity, exhibiting negative fluorosolvatochromism for the synthesized azomethines and positive fluorosolvatochromism for the obtained amines. The results obtained indicate that the synthesized compounds are promising as luminescent dyes.