Adsorptive removal of different pollutants using metal-organic framework adsorbents

Copper nanoclusters-doped novel carrier with synergistic adsorption-catalytic active sites to enable high-performance dye removal

Enhancing the synergistic interplay between adsorption and catalytic oxidation to amplify Fenton-like effects remains a pivotal challenge in advancing water pollution remediation strategies. In this study, a suite of novel carriers (SH) composed of silica (SiO2) and hydroxyapatite (HAp) in different ratios were synthesized through an amalgamation of the sol-gel and co-precipitation techniques. Notably, various forms of copper (Cu) species, including Cu2+ ions and Cu nanoclusters (Cu NCs), could be stably incorporated onto the SH surface via meticulous loading and doping techniques. This approach has engendered a new class of Fenton-like catalysts (Cu NCs-SH1-5) characterized by robust acid-base tolerance stability and remarkable recyclability. Compared with the previously reported Cu NCs-HAp, this catalyst with lower Cu species content could achieve better performance in adsorbing and degrading dyes under the aid of hydrogen peroxide (H2O2). The catalyst's dual action sites, specifically the adsorption sites (SiOH, POH, slit pores) and catalytic centers (multivalent Cu species), had clear division of labor and collaborate with each other. Further, reactive oxygen species (ROS) identification and astute electrochemical testing have unveiled the mechanism underpinning the cooperative degradation of dyes by three types of ROS, spawned through electron transfer between the Fenton-like catalyst (Cu NCs-SH) and H2O2. From these insights, the mechanism of synergistic adsorption-catalytic removal was proposed.

The spinning disc reactor for photocatalytic degradation: A systematic review

In recent years, the use of a horizontal spinning disc reactor (SDR) as a photocatalytic reactor for the degradation of various pollutants in aqueous solutions has increased. This study was searched based on the PRISMA method. Two autonomous researchers carried out for the relevant studies using Scopus, Web of Science (WOS), and Science Direct databases. The search terms expanded focusing on the performance of horizontal spinning disc photocatalytic reactor (SDPR). In this review article, the main objective of the effect of operational factors on the efficiency of the degradation of pollutants with changes in the type of light source (range of visible light and UV radiation), disc rotational speed, flow rate, initial concentration of pollutants, pH, type of disc structure and flow regime are considered. Current challenges in SDPR include issues such as limited mass transfer, uneven light distribution, and difficulties in scaling up. To overcome these challenges, improvements can be made by optimizing reactor design for better mass transfer, enhancing light distribution through advanced light sources or reactor configurations, and developing scalable models that maintain efficiency at larger scales. Additionally, the use of innovative materials and coatings could improve the overall performance of SDPR.

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Recent Advances in Metal-Organic Framework (MOF)-Based Composites for Organic Effluent Remediation

Environmental pollution caused by organic effluents emitted by industry has become a worldwide issue and poses a serious threat to the public and the ecosystem. Metal-organic frameworks (MOFs), comprising metal-containing clusters and organic bridging ligands, are porous and crystalline materials, possessing fascinating shape and size-dependent properties such as high surface area, abundant active sites, well-defined crystal morphologies, and huge potential for surface functionalization. To date, numerous well designated MOFs have emerged as critical functional materials to solve the growing challenges associated with water environmental issues. Here we present the recent progress of MOF-based materials and their applications in the treatment of organic effluents. Firstly, several traditional and emerging synthesis strategies for MOF composites are introduced. Then, the structural and functional regulations of MOF composites are presented and analyzed. Finally, typical applications of MOF-based materials in treating organic effluents, including chemical, pharmaceutical, textile, and agricultural wastewaters are summarized. Overall, this review is anticipated to tailor design and regulation of MOF-based functional materials for boosting the performance of organic effluent remediation.

An application of hierarchical MgAl hydrotalcite in the highly efficient treatment of oilfield macromolecular contaminants

In this work, salicylic acid (SA) was used to induce the self-assembly of octadecyl trimethyl ammonium chloride (OTAC), a cationic surfactant, into three-dimensional wormlike micelle aggregates. These aggregates act as a soft template for hierarchical MgAl hydrotalcite (LDH) to create a multi-level pore structure adsorption material. Scanning electron microscopy characterization showed that the surface of the hierarchical hydrotalcite exhibited a dense layered structure, unlike the monolayer structure of ordinary hydrotalcite. Furthermore, the hierarchical MgAl-LDH possesses a significantly larger specific surface area (113.94 m2/g) and wide pore size distribution ranging more extensively from 2 to 80 nm, which significantly has an impressive adsorption effect on sulfonated lignite (SL), with a maximum adsorption capacity of 192.7 mg/g at pH = 7. Extensive research has been conducted on the adsorption mechanism of hierarchical MgAl-LDH, attributing it to surface adsorption due to the unique multi-level structure of the adsorbent. After two cycles of regeneration experiments, the adsorption capacity of the adsorbent remained at a high level of 179.1 mg/g, demonstrating the excellent renewability of hierarchical MgAl-LDH. Moreover, the hierarchical hydrotalcite showed high adsorption capacity in the adsorption of sulfonated lignite, which was attributed to its larger specific surface area and superior pore structure to expose more active sites.

Molecular Simulation Studies of Pharmaceutical Pollutant Removal (Rosuvastatin and Simvastatin) Using Novel Modified-MOF Nanostructures (UIO-66, UIO-66/Chitosan, and UIO-66/Oxidized Chitosan)

The ubiquitous presence of pharmaceutical pollutants in the environment significantly threatens human health and aquatic ecosystems. Conventional wastewater treatment processes often fall short of effectively removing these emerging contaminants. Therefore, the development of high-performance adsorbents is crucial for environmental remediation. This research utilizes molecular simulation to explore the potential of novel modified metal-organic frameworks (MOFs) in pharmaceutical pollutant removal, paving the way for the design of efficient wastewater treatment strategies. Utilizing UIO-66, a robust MOF, as the base material, we developed UIO-66 functionalized with chitosan (CHI) and oxidized chitosan (OCHI). These modified MOFs' physical and chemical properties were first investigated through various characterization techniques. Subsequently, molecular dynamics simulation (MDS) and Monte Carlo simulation (MCS) were employed to elucidate the adsorption mechanisms of rosuvastatin (ROSU) and simvastatin (SIMV), two prevalent pharmaceutical pollutants, onto these nanostructures. MCS calculations demonstrated a significant enhancement in the adsorption energy by incorporating CHI and OCHI into UIO-66. This increased ROSU from -14,522 to -16,459 kcal/mol and SIMV from -17,652 to -21,207 kcal/mol. Moreover, MDS reveals ROSU rejection rates in neat UIO-66 to be at 40%, rising to 60 and 70% with CHI and OCHI. Accumulation rates increase from 4 Å in UIO-66 to 6 and 9 Å in UIO-CHI and UIO-OCHI. Concentration analysis shows SIMV rejection surges from 50 to 90%, with accumulation rates increasing from 6 to 11 Å with CHI and OCHI in UIO-66. Functionalizing UIO-66 with CHI and OCHI significantly enhanced the adsorption capacity and selectivity for ROSU and SIMV. Abundant hydroxyl and amino groups facilitated strong interactions, improving performance over that of unmodified UIO-66. Surface functionalization plays a vital role in customizing the MOFs for pharmaceutical pollutant removal. These insights guide next-gen adsorbent development, offering high efficiency and selectivity for wastewater treatment.

Investigation the existence and mechanism of Cu(II)-sulfamethoxazole co-pollution by road-deposited sediments in stormwater runoff

In recent years, the escalating attention on Pharmaceutical and Personal Care Products (PPCPs) and Heavy Metals in urban stormwater runoff highlights the critical role of Road-deposited sediments (RDS) as a significant carrier for pollutant occurrence and transport in runoff. However, existing research has overlooked the composite characteristics of PPCPs and Heavy Metals, hampering a holistic understanding of their transformation in diverse forms within runoff. This limitation impedes the exploration of their subsequent migration and conversion properties, thereby obstructing coordinated strategies for the control of co-pollution in runoff. This study focuses on the typical PPCP sulfamethoxazole (SMX) and heavy metal Cu(II) to analyze their occurrence characteristics in the Runoff-RDS system. Kinetics and isotherm studies reveal that RDS effectively accumulates SMX and Cu(II), with both exhibiting rapid association with RDS in the early stages of runoff. The accumulation of SMX and Cu(II) accounts for over 80 % and 70 % of the total accumulation within the first 240 min and 60 min, respectively. Moreover, as runoff pH values decrease, the initially synergistic effect between the co-pollutant transforms into an antagonistic effect. In the composite system, varying pH values from 2.0 to 6.0 lead to an increase in SMX accumulation from 4.01 mg/kg to 6.19 mg/kg and Cu(II) accumulation from 0.43 mg/g to 3.39 mg/g. Compared to the single system, the composite system capacity for SMX and Cu(II) increases by 0.04 mg/kg and 0.33 mg/g at pH 4.0. However, at pH 3.0, the composite system capacity for SMX and Cu(II) decreases by 0.21 mg/kg and 0.36 mg/g, respectively. Protonation/deprotonation of SMX under different pH conditions influences electrostatic repulsion/attraction between SMX and RDS. The mechanism of RDS accumulation of SMX involves Electron Donor-Acceptor (EDA) interaction, hydrogen bond interaction, and Lewis acid-base interaction. Cu(II) enrichment on RDS includes surface complexation reaction, electrostatic interaction, and surface precipitation. Complex formation enhances the accumulation of both SMX and Cu(II) on RDS in runoff. This study elucidates the co-occurrence characteristics and mechanisms of SMX and Cu(II) co-pollution in runoff systems. The findings contribute valuable insights to understanding the existence patterns and mechanisms of co-pollution, providing a reference for investigating the migration and fate of co-pollutant in runoff. Moreover, these insights could offer guidance for the development of effective strategies to mitigate co-pollution in rainwater.

The Application of Metal-Organic Frameworks in Water Treatment and Their Large-Scale Preparation: A Review

Over the last few decades, there has been a growing discourse surrounding environmental and health issues stemming from drinking water and the discharge of effluents into the environment. The rapid advancement of various sewage treatment methodologies has prompted a thorough exploration of promising materials to capitalize on their benefits. Metal-organic frameworks (MOFs), as porous materials, have garnered considerable attention from researchers in recent years. These materials boast exceptional properties: unparalleled porosity, expansive specific surface areas, unique electronic characteristics including semi-conductivity, and a versatile affinity for organic molecules. These attributes have fueled a spike in research activity. This paper reviews the current MOF-based wastewater removal technologies, including separation, catalysis, and related pollutant monitoring methods, and briefly introduces the basic mechanism of some methods. The scale production problems faced by MOF in water treatment applications are evaluated, and two pioneering methods for MOF mass production are highlighted. In closing, we propose targeted recommendations and future perspectives to navigate the challenges of MOF implementation in water purification, enhancing the efficiency of material synthesis for environmental stewardship.

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

Trajectory in biological metal-organic frameworks: Biosensing and sustainable strategies-perspectives and challenges

The ligand attribute of biomolecules to form coordination bonds with metal ions led to the discovery of a novel class of materials called biomolecule-associated metal-organic frameworks (Bio-MOFs). These biomolecules coordinate in multiple ways and provide versatile applications. Far-spread bio-ligands include nucleobases, amino acids, peptides, cyclodextrins, saccharides, porphyrins/metalloporphyrin, proteins, etc. Low-toxicity, self-assembly, stability, designable and selectable porous size, the existence of rigid and flexible forms, bio-compatibility, and synergistic interactions between metal ions have led Bio-MOFs to be commercialized in industries such as sensors, food, pharma, and eco-sensing. The rapid growth and commercialization are stunted by absolute bio-compatibility issues, bulk morphology that makes it rigid to alter shape/porosity, longer reaction times, and inadequate research. This review elucidates the structural vitality, biocompatibility issues, and vital sensing applications, including challenges for incorporating bio-ligands into MOF. Critical innovations in Bio-MOFs' applicative spectrum, including sustainable food packaging, biosensing, insulin and phosphoprotein detection, gas sensing, CO2 capture, pesticide carriers, toxicant adsorptions, etc., have been elucidated. Emphasis is placed on biosensing and biomedical applications with biomimetic catalysis and sensitive sensor designing.

Highly Efficient Cauliflower-like Palladium-Loaded Porous MOF as a Robust Material for the Degradation of Organic Dyes

A series of porous MOF materials, viz., Pdx@IRMOF-9 (x = 2, 5, and 10%) were synthesized by loading varying concentrations of Pd(II) on IRMOF-9. The synthesized MOF materials were characterized by ltravioletisible (UV-Vis) spectroscopy, Fourier transform Infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM) analyses. UV, FT-IR, and PXRD data of Pd(II)@IRMOF-9 were found to be in line with those of IRMOF-9, which suggests that the structure of the IRMOF-9 remained intact upon Pd(II) loading. Surface morphology of IRMOF-9 showed sheet-like structures, and upon incorporation of Pd(II) to IRMOF-9, porous cauliflower-shaped MOFs were obtained. The SEM area mapping of Pd10%@IRMOF-9 confirmed the homogeneous dispersion of Pd(II) on IRMOF-9. BET measurements suggested an increase in the surface area as well as pore size upon incorporation of Pd(II) on IRMOF-9. Due to high porosity and high petal density, Pd10%@IRMOF-9 demonstrated degradation of seven organic dyes, namely, orange G, methylene blue, methyl orange, congo red , methyl red, rhodamine 6G, and neutral red. It showed excellent results with >90% dye degradation efficiency in case of cationic, anionic as well as neutral dyes. Degradation of organic dyes followed the pseudo-first-order kinetics. Kinetic parameters, KM and Vmax, were calculated using the double reciprocal Lineweaver-Burk plot and were found to be 13.2 μM and 26.68 × 10-8 M min-1, respectively. Recyclability studies of heterogeneous Pd10%@IRMOF-9 demonstrated the degradation of CR dye for five consecutive cycles without significant loss of its catalytic activity. Herein, a robust and efficient material for the degradation of organic dyes has been developed and demonstrated.

Improved structure of Zr-BTC metal organic framework using NH2 to enhance CO2 adsorption performance

Modified mesoporous NH2-Zr-BTC mixed ligand MOF nanocomposites were synthesized via the hydrothermal method as a novel adsorbent for CO2 capture. The newly modified MOF-808 with NH2 demonstrated a similar mesoporous morphology as MOF-808, whereas the specific surface area, pore volume, and average particle size, respectively, increased by 15%, 6%, and 46% compared to those of MOF-808. The characterization analyses exhibited the formation of more active groups on the adsorbent surface after modification. In addition, a laboratory adsorption setup was used to evaluate the effect of temperature, pressure, and NH2 content on the CO2 adsorption capacity in the range of 25-65 °C, 1-9 bar, and 0-20 wt%, respectively. An increase in pressure and a decrease in temperature enhanced the adsorption capacity. The highest equilibrium adsorption capacity of 369.11 mg/g was achieved at 25 °C, 9 bar, and 20 wt% NH2. By adding 20 wt% NH2, the maximum adsorption capacity calculated by the Langmuir model increased by about 4% compared to that of pure MOF-808. Moreover, Ritchie second-order and Sips models were the best-fitted models to predict the kinetics and isotherm data of CO2 adsorption capacity with the high correlation coefficient (R2 > 0.99) and AARE% of less than 0.1. The ΔH°, ΔS°, and ΔG° values were - 17.360 kJ/mol, - 0.028 kJ/mol K, and - 8.975 kJ/mol, respectively, demonstrating a spontaneous, exothermic, and physical adsorption process. Furthermore, the capacity of MH-20% sample decreased from 279.05 to 257.56 mg/g after 15 cycles, verifying excellent stability of the prepared mix-ligand MOF sorbent.

Linker-Functionalized Phosphinate Metal-Organic Frameworks: Adsorbents for the Removal of Emerging Pollutants

Metal-organic frameworks (MOFs) are attracting increasing attention as adsorbents of contaminants of emerging concern that are difficult to remove by conventional processes. This paper examines how functional groups covering the pore walls of phosphinate-based MOFs affect the adsorption of specific pharmaceutical pollutants (diclofenac, cephalexin, and sulfamethoxazole) and their hydrolytic stability. New structures, isoreticular to the phosphinate MOF ICR-7, are presented. The phenyl ring facing the pore wall of the presented MOFs is modified with dimethylamino groups (ICR-8) and ethyl carboxylate groups (ICR-14). These functionalized MOFs were obtained from two newly synthesized phosphinate linkers containing the respective functional groups. The presence of additional functional groups resulted in higher affinity toward the tested pollutants compared to ICR-7 or activated carbon. However, this modification also comes with a reduced adsorption capacity. Importantly, the introduction of the functional groups enhanced the hydrolytic stability of the MOFs.

Dandelion flower-fabricated Ag nanoparticles versus synthetic ones with characterization and determination of photocatalytic, antioxidant, antibacterial, and α-glucosidase inhibitory activities

In the present work, Silver nanoparticles (AgNPs) were fabricated through the dandelion flower hydroalcoholic extract, and their properties were characterized by FTIR, XRD, UV visible, SEM, and EDX. The results demonstrated that the average diameter of the green fabricated AgNPs is 45-55 nm (G-AgNPs). The antioxidant, antimicrobial, antidiabetic, and photocatalytic properties of G-AgNPs were compared with two commercially available different diameter sizes (20 and 80-100 nm) of AgNPs (C-AgNPs1- and C-AgNPs2, respectively). The sample's capacity for antioxidants was evaluated by DPPH free radical scavenging method. The consequences showed that G-AgNPs have higher radical scavenging activity (47.8%) than C-AgNPs2 (39.49%) and C-AgNPs1 (33.91%). To investigate the photocatalytic property, methylene blue dye was used. The results displayed that G-AgNPs is an effective photo-catalyst compared to C-AgNPs2 and C-AgNPs1, which respectively have an inhibition potential of 75.22, 51.94, and 56.65%. Also, the antimicrobial capacity of nanoparticles was assayed against, the gram-negative Escherichia coli and gram-positive Staphylococcus aureus bacteria. The results indicated that G-AgNPs could effectively inhibit the growth of both bacteria, compared to C-AgNPs1 and C-AgNPs2. Finally, G-AgNPs exhibited a considerable α-glucosidase enzyme inhibitory effect (88.37%) in comparison with C-AgNPs1 (61.7%) and C-AgNPs2 (50.5%).

Mesoporous Materials for Metal-Laden Wastewater Treatment

Rapid technological, industrial and agricultural development has resulted in the release of large volumes of pollutants, including metal ions, into the environment. Heavy metals have become of great concern due to their toxicity, persistence, and adverse effects caused to the environment and population. In this regard, municipal and industrial effluents should be thoroughly treated before being discharged into natural water or used for irrigation. The physical, chemical, and biological techniques applied for wastewater treatment adsorption have a special place in enabling effective pollutant removal. Currently, plenty of adsorbents of different origins are applied for the treatment of metal-containing aqueous solution and wastewater. The present review is focused on mesoporous materials. In particular, the recent achievements in mesoporous materials' synthesis and application in wastewater treatment are discussed. The mechanisms of metal adsorption onto mesoporous materials are highlighted and examples of their multiple uses for metal removal are presented. The information contained in the review can be used by researchers and environmental engineers involved in the development of new adsorbents and the improvement of wastewater treatment technologies.

Facile adsorption of organophosphate pesticides over HKUST-1 MOFs

The recovery of organophosphate pesticides (OPPs) from aqueous solutions is imperative considering their agricultural and environmental implications. Among various mitigation approaches used for OPPs' removal, adsorption offers many advantageous features for OPPs abatement owing to its benign nature, cost-effective processing, and non-requirement of excessive equipment. This research describes the adsorptive removal of three organophosphate pesticides (OPPs) namely chlorpyrifos (CPF), methyl parathion (MP), and malathion (MAL) by HKUST-1 (HKUST = Hong Kong University of Science and Technology) metal-organic framework (MOF). The synthesis of HKUST-1 MOFs was confirmed by various spectroscopic and microscopic techniques. The adsorption kinetics was systematically investigated by varying three parameters to include solution pH, contact time, and initial pesticide concentration. Among all the three pesticides, HKUST-1 showed enhanced removal of CPF in terms of pH, resulting in an adsorption capacity of 1.82 mg·g-1. However, under the effect of contact time at 60 min, the adsorption capacity of HKUST-1 for PM, MAL, and CPF were computed to be 1.83, 1.79, and 0.44 mg·g-1, respectively. Besides, HKUST-1 showed a remarkable performance towards adsorptive removal of MAL (14.01 mg·g-1 at 10 mg·L-1 concentration) with linear increase in adsorption capacity as the function of initial pesticide concentration. The MOFs were also able to retain ca. 50% of their adsorption efficiency over the course of five cycles of adsorptive removal of CP. In the future, a comprehensive data table showing the performance of various MOFs against various OPPs can be constructed on the basis of parameters used in this study.

Synthesis of a pyridine-based covalent organic framework as an efficient adsorbent for rhodamine B removal

Covalent organic frameworks (COFs), featured with crystalline structures, permanent porosity, and designable organic skeletons, are good candidates for serving as adsorbents. Herein, a new pyridine-based two-dimensional COF (TAPP-DBTA-COF) was constructed via the condensation of 2,4,6-tris(4-aminophenyl)pyridine and 2,5-dibromobenzene-1,4-dicarbaldehyde. TAPP-DBTA-COF displayed high-performance for the removal of rhodamine B (Rh B) from water with high capacity, good adaptability and reusability. The maximum adsorption capacity for Rh B can reach up to 1254 mg g-1, and the kinetic constant was determined as k2 = 0.00244 g mg-1 min-1. Moreover, the corresponding amorphous polymer of TAPP-DBTA-COF, termed as TAPP-DBTA-COP, was synthesized from the same starting materials. The lower efficiency of TAPP-DBTA-COP in capture of Rh B revealed that the ordered pore structure, large specific surface area and rich adsorption sites play an important role in adsorption.

Bio-Based Adsorption as Ecofriendly Method for Wastewater Decontamination: A Review

Intense human activities have for years contributed to the pollution of the environment by many dangerous pollutants such as heavy metals, pesticides, or polycyclic aromatic hydrocarbons. There are many conventional methods used to control pollution, with practical and/or financial drawbacks. Therefore, in recent years, an innovative, easy-to-implement and inexpensive adsorption method has been developed to recover waste and clean up water from micropollutants. Firstly, this article aims to summarize the issues related to water remediation and to understand the advantages and disadvantages of the methods classically used to purify water. In particular, this review aims to provide a recent update of the bio-based adsorbents and their use. Differently from the majority of the reviews related to wastewater treatment, in this article several classes of pollutants are considered. Then, a discussion about the adsorption process and interactions involved is provided. Finally, perspectives are suggested about the future work to be done in this field.

Adsorptive removal of antibiotic pollutants from wastewater using biomass/biochar-based adsorbents

This study explores adsorptive removal measures to shed light on current water treatment innovations for kinetic/isotherm models and their applications to antibiotic pollutants using a broad range of biomass-based adsorbents. The structure, classifications, sources, distribution, and different techniques for the remediation of antibiotics are discussed. Unlike previous studies, a wide range of adsorbents are covered and adsorption of comprehensive classes of antibiotics onto biomass/biochar-based adsorbents are categorized as β-lactam, fluoroquinolone, sulfonamide, tetracycline, macrolides, chloramphenicol, antiseptic additives, glycosamides, reductase inhibitors, and multiple antibiotic systems. This allows for an assessment of their performance and an understanding of current research breakthroughs in applying various adsorbent materials for antibiotic removal. Distinct from other studies in the field, the theoretical basis of different isotherm and kinetics models and the corresponding experimental insights into their applications to antibiotics are discussed extensively, thereby identifying the associated strengths, limitations, and efficacy of kinetics and isotherms for describing the performances of the adsorbents. In addition, we explore the regeneration of adsorbents and the potential applications of the adsorbents in engineering. Lastly, scholars will be able to grasp the present resources employed and the future necessities for antibiotic wastewater remediation.

Removal of pharmaceutical and personal care products (PPCPs) by MOF-derived carbons: A review

Nowadays, the increasing demand for pharmaceuticals and personal care products (PPCPs) has resulted in the uncontrolled release of large amounts of PPCPs into the environment, which poses a great challenge to the existing wastewater treatment technologies. Therefore, novel materials for efficient treatment of PPCPs need to be developed urgently. MOF-derived carbons (MDCs), have many advantages such as high mechanical strength, excellent water stability, large specific surface area, excellent electron transfer capability, and environmental friendliness. These advantages give MDCs an excellent ability to remove PPCPs. In this review, the effects of different substances on the properties and functions of MDCs are discussed. In addition, representative applications of MDCs and composites for the removal of PPCPs in the field of adsorption and catalysis are summarized. Finally, the future challenges of MDCs and composites are foreseen.

Effective adsorption of cadmium and lead using SO3H-functionalized Zr-MOFs in aqueous medium

Cadmium (Cd) and Lead (Pb) from industrial wastewater can bioaccumulate in the living organisms of water bodies, posing serious threats to human health. Therefore, efficient remediation of heavy metal ions of Cd (II) and Pb (II) in aqueous media is necessary for public health and environmental sustainability. In the present study, water stable Zirconium (Zr) based metal organic frameworks (MOFs) with SO3H functionalization were synthesized by solvothermal method and used first time for the adsorption of Cd (II) and Pb (II). Synthesis of UiO-66-SO3H, nano-sized (<100 nm) MOFs, was confirmed by FTIR, XRD, FESEM and BET. Effects of contact time, pH and temperature were investigated for adsorption of Cd (II) and Pb (II) onto SO3H-functionalized Zr-MOFs. The UiO-66-SO3H displayed notable rejections of 97% and 88% towards Cd (II) and Pb (II), respectively, after 160 min at 25 °C and pH (6) with an initial concentration of 1000 mg/L. Adsorption capacities of Cd (II) and Pb (II) were achieved as 194.9154 (mg/g) and 176.6879 (mg/g), respectively, at an initial concentration of 1000 mg/L. The Pseudo second-order kinetic model fitted well with linear regression (R2) of value 1. The mechanism was confirmed mainly as a chemisorption and coordination interaction between sulfone group (-SO3H) and metal ions Cd (IIa) and Pb (II). These results may support effective adsorption and can be studied further to enrich and recycle other heavy metals from wastewater.

Preparation of Magnetic MIL-68(Ga) Metal-Organic Framework and Heavy Metal Ion Removal Application

A magnetic metal-organic framework nanocomposite (magnetic MIL-68(Ga)) was synthesized through a "one pot" reaction and used for heavy metal ion removal. The morphology and elemental properties of the nanocomposite were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), as well as zeta potential. Moreover, the factors affecting the adsorption capacity of the nanocomposite, including time, pH, metal ion type and concentration, were studied. It was found that the adsorption capacity of magnetic MIL-68(Ga) for Pb²⁺ and Cu²⁺ was 220 and 130 mg/g, respectively. Notably, the magnetic adsorbents could be separated easily using an external magnetic field, regenerated by ethylenediaminetetraacetic acid disodium salt (EDTA-Na₂) and reused three times, in favor of practical application. This study provides a reference for the rapid separation and purification of heavy metal ions from wastewater.

Recent Advances in MOF-Based Adsorbents for Dye Removal from the Aquatic Environment

The adsorptive removal of dyes from industrial wastewater using commercially available adsorbents is not significantly efficient. Metal–organic frameworks (MOFs) offer outstanding properties which can boost the separation performance over current commercial adsorbents and hence, these materials represent a milestone in improving treatment methods for dye removal from water. Accordingly, in this paper, the recent studies in the modification of MOF structures in dye removal from the aquatic environment have been discussed. This study aims to elaborate on the synthetic strategies applied to improve the adsorption efficiency and to discuss the major adsorption mechanisms as well as the most influential parameters in the adsorptive removal of dyes using MOFs. More particularly, the advanced separation performance of MOF-based adsorbents will be comprehensively explained. The introduction of various functional groups and nanomaterials, such as amine functional groups, magnetic nanoparticles, and carbon-based materials such as graphene oxide and CNT, onto the MOFs can alter the removal efficiency of MOF-based adsorbents through enhancing the water stability, dispersion in water, interactions between the MOF structure and the contaminant, and the adsorption capacity. Finally, we summarize the challenges experienced by MOF-based materials for dye removal from water and propose future research outlooks to be considered.

Activated carbon versus metal-organic frameworks: A review of their PFAS adsorption performance

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a class of fluorinated aliphatic compounds considered as emerging persistent pollutants. Owing to their adverse effects on human health and environment, efficient methods of their removal from various complex matrices need to be developed. This review focuses on recent results addressing the adsorption of PFAS on activated carbons (AC) and metal-organic frameworks (MOF). While the former are well-established adsorbents used in water treatment, the latter are relatively new and still not applied at a large scale. Nevertheless, they attract research interests owing to their developed porosity and versatile surface chemistry. While AC provide high volumes of pores and hydrophobic surfaces to strongly attract fluorinated chains, MOF supply sites for acid-base complexation and a variety of specific interactions. The modifications of AC are focused on the introduction of basicity to attract PFAS anions via electrostatic/chemical interactions, and those of MOF - on structural defects to increase the pore sizes. Based on the comparison of the performance and specifically adsorption forces provided by these two groups of materials, activated carbons were pointed out as worthy of further research efforts. This is because their surface, especially that in large pores, where dispersive forces are week and where extensive pore space might be utilized to adsorb more PFAS, can be further chemically modified and these modifications might be informed by the mechanisms of PFAS adsorption, which are specific for MOF. This review emphasizes the effects of these modifications on the adsorption mechanism and brings the critical assessment of the advantages/disadvantages of both groups as PFAS adsorbents.

The Effectiveness of MOFs for the Removal of Pharmaceuticals from Aquatic Environments: A Review Focused on Antibiotics Removal

There is an increasing level of various pollutants and their persistence in aquatic environments. The improper use of antibiotics and their inefficient metabolism in organisms result in their release into aquatic environments. Antibiotic abuse has led to hazardous effects on human health. Thereby, efficient removal of pharmaceuticals, particularly antibiotics, from wastewater and contaminated water bodies is greatly interested in international research communities. Metal-organic framework (MOF) materials, as a hybrid group of material containing metallic center and organic linkers, offer a porous structure that is highly efficient for removing different pollutants from contaminated water and wastewater streams. This article aims to review the recent advancement in using MOF-based adsorbents and catalysts for the removal of pharmaceuticals, especially antibiotics, from polluted water. Applying MOFs-based structures for removing antibiotics using photocatalytic removal and adsorptive removal techniques will be discussed and evaluated in this review paper. Various MOF-based materials such as functionalized MOFs, MOF-based composites, magnetic MOF-based composites, MOFs templated-metal oxide catalysts for removing pharmaceuticals, personal care products, and antibiotics from contaminated aqueous media are discussed. Furthermore, effective operational parameters on the adsorption, adsorption mechanisms, adsorption isotherms, and thermodynamic parameters are explained and discussed. Finally, in the concluding remarks, the challenges and future outlooks of using MOFs-based adsorbents and catalysts for removing antibiotics are summarized.

Water Purification of Classical and Emerging Organic Pollutants: An Extensive Review

The main techniques used for organic pollutant removal from water are adsorption, reductive and oxidative processes, phytoremediation, bioremediation, separation by membranes and liquid–liquid extraction. In this review, strengths and weaknesses of the different purification techniques are discussed, with particular attention to the newest results published in the scientific literature. This study highlighted that adsorption is the most frequently used method for water purification, since it can balance high organic pollutants removal efficiency, it has the possibility to treat a large quantity of water in semi-continuous way and has acceptable costs.

An Environmentally Friendly Method for Removing Hg(II), Pb(II), Cd(II) and Sn(II) Heavy Metals from Wastewater Using Novel Metal–Carbon-Based Composites

Rapid economic and industrial development and population growth have made water contamination a serious environmental problem and a major threat to public health worldwide. Heavy metals are extensively used in numerous industrial applications and are some of the most important environmental contaminants. The impacts of heavy metals on the health of humans, animals, and plants make their removal from wastewater and water resources an important and vital issue. In this study, a simple and environmentally friendly method is proposed for the synthesis of a ZnFe2O4-carbon nanotube (CNT) adsorbent material. SEM/EDX analysis and Fourier-transform infrared spectrophotometry (FTIR) are used to characterize the synthesized adsorbent material. We test the synthesized adsorbent material’s ability to recover four heavy metals (Hg(II), Pb(II), Cd(II) and Sn(II) ions) from an aqueous solution. We show that crushing fullerene CNTs with the ZnFe2O4 composite improves the adsorption properties of free fullerene CNTs towards the investigated heavy metal ions by 25%.

ZIF-based boronic acid functionalized metal-organic frameworks for the enrichment of cis-diol-containing luteolin from food samples prior to HPLC

Zeolite imidazole framework-based boronic acid-functionalized metal-organic frameworks (ZIF-67@PDA@BA-Zr-MOFs) were developed as an adsorbent for solid phase extraction (SPE) of luteolin (LTL) from peanut shell samples. Herein, ZIF-67 as a support matrix, polydopamine (PDA) as a coating to introduce amino and hydroxyl groups on the matrix surface to fix metal-organic frameworks (MOFs), zirconium tetrachloride (ZrCl₄) as a precursor, terephthalic acid (TPA), and 3-carboxyphenylboronic acid (3-CPBA) as the mutual organic building blocks, and 3-CPBA was also a boronate affinity functional monomer. The effects of synthesis conditions, SPE conditions, selectivity, competitivity, reproducibility, and reusability were evaluated in detail. Under the optimal conditions, the maximum adsorption capacity is 71.4 mg g^-1. The utility of ZIF-67@PDA@BA-Zr-MOFs as an adsorbent for SPE of LTL is supported by the presence of the abundant pore structure, as well as the boronate affinity sites facilitated the rapid binding of the adsorbent to the template. The concentration of the extracted LTL was determined by the high-performance liquid chromatography-ultraviolet (HPLC-UV), with calibration plots being linear in the concentration range 0.05-100 mg L^-1 and a limit of detection (LOD) of 0.035 mg L^-1. The method was applied to determine the LTL in peanut shell samples and recovered the target analyte in the range 85.6% to 99.2% (the standard deviations are less than 3.3%, n = 3). In addition, we incorporated boronate affinity and MOFs material into an SPE system to provide a promising strategy to detect other cis-diol-containing analytes in the complex matrix.