Experimental investigation of the entanglement network and nonlinear viscoelastic behavior of a nano-SiO2 strengthened polymer gel

Mechanically Strengthened Aerogels through Multiscale, Multicompositional, and Multidimensional Approaches: A Review

In recent decades, aerogels have attracted tremendous attention in academia and industry as a class of lightweight and porous multifunctional nanomaterial. Despite their wide application range, the low mechanical durability hinders their processing and handling, particularly in applications requiring complex physical structures. "Mechanically strengthened aerogels" have emerged as a potential solution to address this drawback. Since the first report on aerogels in 1931, various modified synthesis processes have been introduced in the last few decades to enhance the aerogel mechanical strength, further advancing their multifunctional scope. This review summarizes the state-of-the-art developments of mechanically strengthened aerogels through multicompositional and multidimensional approaches. Furthermore, new trends and future directions for as prevailed commercialization of aerogels as plastic materials are discussed.

Investigation of Polymer Gel Reinforced by Oxygen Scavengers and Nano-SiO2 for Flue Gas Flooding Reservoir

Polymer gel plugging is an effective technique for gas mobility control in flue gas flooding reservoirs. However, the performance of polymer gels is extremely susceptible to the injected flue gas. A reinforced chromium acetate/partially hydrolyzed polyacrylamide (HPAM) gel, using thiourea as the oxygen scavenger and nano-SiO₂ as the stabilizer, was formulated. The related properties were evaluated systematically, including gelation time, gel strength, and long-term stability. The results indicated that the degradation of polymers was effectively suppressed by oxygen scavengers and nano-SiO₂. The gel strength would be increased by 40% and the gel kept desirable stability after aging for 180 days at elevated flue gas pressures. Dynamic light scattering (DLS) analysis and Cryo-scanning electron microscopy (Cryo-SEM) revealed that nano-SiO₂ was adsorbed on polymer chains by hydrogen bonding, which improved the homogeneity of gel structure and thus enhanced the gel strength. Besides, the compression resistance of gels was studied by creep and creep recovery tests. The failure stress of gel with the addition of thiourea and nanoparticles could reach up to 35 Pa. The gel retained a robust structure despite extensive deformation. Moreover, the flow experiment indicated that the plugging rate of reinforced gel still maintained up to 93% after flue gas flooding. It is concluded that the reinforced gel is applicable for flue gas flooding reservoirs.

Preparation Method and Performance Evaluation of a Gel Based on AM/AMPS Copolymer

Polymer gels have been widely used in high water cut oilfields for profile control and water plugging. It is urgent to develop a gel suitable for the Tahe Oilfield (Temperature: 130 °C, salinity: 2.2 × 10⁵ mg/L) in China. A stable gel was prepared by using an acrylamide (AM)/2-acrylamide-2-methyl propanesulfonic acid (AMPS) copolymer crosslinked with urotropin (HMTA), hydroquinone (HQ), thiourea and Nano-SiO₂. This paper covers a step-by-step process for designing gels based on experience with preparing gels. A wide range of combinations between polymers and crosslinking agents with and without stabilizers were investigated, and the results indicated that there is an optimal value of AMPS content of AM/AMPS copolymers in the preparation of gels. Increasing the mass fraction of copolymer and using stabilizer enhanced the performance of gel, but an excessive amount of crosslinking agent was not conducive to the stability of gel. The work optimized the formula of plugging agent suitable for the high temperature and high salt (HTHS) condition in the Tahe Oilfield. The gelling solution had a long gelation time of 20 h. The gel had high strength (Sydansk's gel-strength code of "G") with storage modulus of 12.9 Pa and could be stable for half a year at 130 °C and 2.2 × 10⁵ mg/L of salinity. The plate model that could be heated and pressurized was used to simulate the oil flooding and profile modification under the condition of the Tahe Oilfield for the first time. The experiment results showed that the oil recovery could be increased by 13.22% by subsequent water flooding under heterogeneous formation condition. Therefore, it was fully confirmed that the plugging performance of AM/AMPS phenolic gel prepared in the work was excellent. The information provided in the study could be used as a reference for the design and evaluation of polymer gels in other HTHS reservoirs.

New Insights and Experimental Investigation of High-Temperature Gel Reinforced by Nano-SiO2

The properties of a reinforced gel with partially hydrolyzed polyacrylamide (HPAM) as the main agent, water-soluble phenolic resin (WSPR) as the crosslinker, and nano-SiO₂ as the stabilizer were evaluated in terms of gelation time, gel strength and thermal stability under the conditions of 110 °C and 12.124 g/L salinity in water. The results showed that the gelation time of the gel with high strength was adjustable from 3 to 23 h, remaining stable for more than 180 days under stratigraphic conditions, although with a certain degree of early dehydration in the gel. Cryo-scanning electron microscopy (cryo-SEM) and dynamic light scattering (DLS) analysis revealed that nano-SiO₂ improves the dispersion of the polymer in water, resulting in a more homogeneous structure of the formed gel and thus improving the strength of the gels. In addition, rheological tests and cryo-SEM showed that the interaction between nano-SiO₂ and the polymer could inhibit the degradation of polymer to a certain extent and improve the thermal stability of the gel. However, the oxidative degradation of the gel is still the main cause of early dehydration of water-soluble phenolic resin gel, and the addition of a small amount of hydroquinone to the gelants can significantly improve the antioxidative degradation properties of phenolic resin gel.

Syneresis Behavior of Polymer Gels Aged in Different Brines from Gelants

Gel syneresis is a common problem in gel treatment for oil recovery applications. In this study, a stable gel was prepared in a soft brine by using a water-soluble phenolic resin as a crosslinker, nanoparticles as a stabilizer, and partially hydrolyzed polyacrylamide (HPAM) or copolymers with different contents of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) groups as polymers. The syneresis behavior of the gels formed in a soft brine was evaluated upon aging in hard brines. The results show that when the salinity of the hard brine is lower than 30,000 mg/L, the gel expands, and its strength decreases; when the salinity of the hard brine is higher than 50,000 mg/L, the gel exhibits syneresis, and its strength increases. The effects of various influencing factors on the gel syneresis behavior were also evaluated. It was found that optimizing the polymer structure and adding nanoparticles can effectively overcome gel syneresis and enhance gel stability. Based on the research described in this paper, some proposals for designing salt-resistant polymer gels are presented.