Which is better for Lindane pesticide adsorption, graphene or graphene oxide? An experimental and DFT study

Significant Increase in the Dipole Moment of Graphene on Functionalization: DFT Calculations and Molecular Dynamics Simulations

The limited solubility of graphene in water can be attributed to the existence of π-π bonds connecting its layers. Functionalized graphene or graphene oxide (GO) is frequently produced in order to overcome the shortcomings of graphene. Using density functional theory (DFT) calculation, functionalized graphene with various combinations of hydroxyl, epoxy, and carboxylic functional groups were investigated computationally. The study focused on the effects of functional group combinations on the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies, giving information about the chemical reactivity and stability of the molecules under investigation. Global chemical reactivity descriptors, including chemical hardness, softness, electronegativity, chemical potential, and electrophilicity index, were calculated to further elucidate the overall stability and reactivity of the molecules. The results demonstrated that the introduction of oxygen-containing functional groups on graphene significantly influenced its electronic properties, leading to variations in the chemical reactivity and stability. Molecular electrostatic potential (MEP) maps highlighted the susceptibility of specific regions to electrophilic and nucleophilic attacks. The flexibility and stability of functionalized graphene through root mean square fluctuation (RMSF) and root mean square deviation (RMSD) analyses indicate the stability of functionalized graphene in water. This comprehensive computational investigation provides valuable insights into the design and understanding of functionalized graphene for potential applications in drug delivery.

Adsorption of Methylene Blue Dye and Analysis of Two Clays: A Study of Kinetics, Thermodynamics, and Modeling with DFT, MD, and MC Simulations

The purpose of this research was to learn more about the primary and secondary properties of Moroccan natural clay in an effort to better investigate innovative adsorbents and gain access to an ideal adsorption system. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis (SEM-EDX) and X-ray fluorescence were employed for identification. SEM revealed clay grains, including tiny particles and unevenly shaped sticks. First- and second-order rate laws, representing two distinct kinetic models, were applied in the kinetic approach. Adsorption of dye MB onto natural clay was studied, and the results agreed with the 2 s order model. The significant correlation coefficients support the inference that the adsorption process was governed by the Langmuir model. Subsequent DFT analyses demonstrated that the methylene blue dye's HOMO and LUMO surfaces are dispersed across most of the dye's components, pointing to a strong interaction with the clay. To determine how the dye might be adsorbed onto the clay, we employed quantum descriptors to locate its most nucleophilic and electrophilic centers. Endothermic reactions are evident during the MB adsorption process on clay, as indicated by the positive values of ΔH0 and ΔS0 (70.49 kJ mol-1of RC and 84.19 kJ mol-1 of OC and 10.45 J mol-1 K-1 of RC and 12.68 mol-1 K-1 of OC, respectively). Additionally dye molecules on the adsorbent exhibit a higher order of distribution than in the solution, indicating that the adsorption process is spontaneous.

Graphene oxide as an emerging sole adsorbent and photocatalyst: Chemistry of synthesis and tailoring properties for removal of emerging contaminants

Contaminants of emerging concern (CEC) contain a wide range of compounds, such as pharmaceutical waste, pesticides, herbicides, industrial chemicals, organic dyes, etc. Their presence in the surrounding has extensive and multifaceted effects on human health as they have the potential to persist in the environment, accumulate in biota, and disrupt ecosystems. In this regard, various remediation methods involving different kind of functional nanomaterials with unique properties have been developed. The functional nanomaterials can provide several mechanisms for water pollutant removal, such as adsorption, catalysis, and disinfection, in a single platform. Graphene oxide (GO) is a two-dimensional carbon-based material that has an extremely large surface area and a large number of active sites. Recent advances in synthesising GO have shown great progress in tailoring its various physiochemical, optical, surface, structural properties etc., making it better adsorbent and photocatalysts. In this review, sole adsorbent and standalone photocatalytic performances of GO for the removal of CEC have been discussed in light of tailoring its adsorption and photocatalytic properties through novel synthesis routes and optimizing synthesis parameters. This review also examines various models describing the structure of GO and its surface/structural modifications for improved adsorption and photocatalytic properties. The article provides valuable information for the production of efficient and cost-effective GO-based sole adsorbents and photocatalysts as compared to the traditional materials. Furthermore, future prospective and challenges for sole GO nanostructures to compete with traditional adsorbents and photocatalysts have been discussed providing interesting avenues for future research.

Synthesis of hydroxyapatite/polyethylene glycol 6000 composites by novel dissolution/precipitation method: optimization of the adsorption process using a factorial design: DFT and molecular dynamic

In this work, we presented a synthesis of a composite based on HAp and PEG 6000 using a new method of synthesis dissolution precipitation to be applied for application of wastewater purification from toxic metal ions. Multiple characterization methods were used to analyze the morphology and the structure of the well-prepared compounds including FT-IR, Raman, XRD, XPS, TGA and SEM were used to conduct a composite analysis. The adsorption effectiveness of this analysis towards Pb2+ and various other hazardous metal ions found in sewage was assessed. Batch experiments were conducted to optimize the various operational parameters including adsorbent dose, temperature, pH, contact time, and initial concentration. The Langmuir isotherm was used to fit the data, and it predicted monolayer adsorption with a maximum capacity of 67 mg g-1 for HAP PEG600 and 60 mg g-1 for HAp. A pseudo-second-order equation fits the adsorption process well (0.961-0.971). The thermodynamic data support the spontaneous metal bonding to the composite receptor sites. Theoretical calculations showed that the interaction strength is very strong and gets stronger when the PEG6000 is deprotonated. The results presented here are supported by evidence acquired from experiments. Theoretical computation using Monte Carlo (MC) and Molecular Dynamic (MD) simulation models showed excellent affinity of prepared foams for the model ion Pb2+ with highly negative adsorption energy values indicating vigorous interactions of Pb2+ with the adsorbate surfaces.

Application of Taguchi method, response surface methodology, DFT calculation and molecular dynamics simulation into the removal of orange G and crystal violet by treated biomass

In this work, the efficiency of the treated plant Carpobrotus edulis (TPCE) as an effective biosorbent for removing the orange G (OG) and crystal violet (CV) dyes from aqueous solution was investigated. TPCE was characterized by FT-IR, Ss, pHz and SEM-EDX. The influence of parameters such as bioadsorbent dose, contact time, initial concentration, temperature and pH was tested using Taguchi experimental design (TED) with L8 orthogonal array (five parameters in two levels). The initial concentration, bioadsorbent dose and contact time are the main parameters for the removal of CV and OG dyes, while the effects of pH and temperature are minimal. The maximum removal efficiency of dyes under optimal operating conditions was 97.93 % and 92.68 %, respectively. which at the optimal conditions of 3 g/L, pH 10, 20 mg/L, 35 °C, 5 min and 15 g/L, pH 4, 20 mg/L, 35 °C, 60 min for CV and OG dyes, respectively. The results of response surface methodology (RSM) and analysis of variance (ANOVA) showed that the initial concentration Ci of CV dye was the most significant factor in the adsorption efficiency with a contribution of 51.56 %. On the other hand, the OG bioadsorbent dose is the most important factor in adsorption efficiency with a percentage contribution of 56.41 %. The Density Functional Tight Binding (DFTB) method shows that dyes strongly bind the adsorbent surface. Monte Carlo and molecular dynamics simulations show significant interactions between dye and adsorbent surface. The reusability of biomaterial indicated that the adsorption performance dropped very slightly up to five cycles.

Cork barriers for the remediation of soils polluted with lindane

The in-situ removal of lindane from spiked soil was studied using cork barriers combined with electrokinetic and ohmic heating soil remediation processes. Both vertical and horizontal cork barriers have been evaluated to retain pollutants mobilized by electro-osmotic flow or volatilized by ohmic heating. Moreover, the addition of surfactant solutions in electrolyte wells has been evaluated to promote the dragging of lindane by electrokinetic fluxes. Results indicated that the drag of lindane by liquid flows is not as important as expected, opposite to what happened with the dragging by gaseous flows. The retention of gaseous lindane was also confirmed in adsorption tests carried out in a column packed with cork granules. The addition of surfactant had a very limited effect on the mobility of lindane, and dragging of this species to the electrode wells or to a permeable reactive barrier. On the contrary, the reactivity of lindane during the electrochemical treatments is relevant due to the electrokinetic basic front promoting the in-situ conversion of lindane into less chlorinated pollutants.

Environmental Application of Graphene and Its Forms for Wastewater Treatment: a Sustainable Solution Toward Improved Public Health

Public health is seriously jeopardized in developing countries due to poor sanitation and the presence of persistent pollutants in natural water bodies. Open dumping, wastewater discharge without proper treatment and atmospheric fallout of the organic and inorganic pollutants are the main causes behind the poor condition. Some of the pollutants pose a greater risk due to their toxicity and persistence. Such a class of pollutants are known as chemical contaminants of emerging concern (CECC), including antibiotics and drug residues, endocrine disruptors, pesticides and micro- and nano-plastics. Conventional treatment methods cannot treat them properly and are often associated with several disadvantages. However, the chronological development of techniques and materials for their treatment has exhibited graphene as an efficient candidate for environmental remediation. This current review considers the various graphene-based materials, their properties, advancement in synthesis methods with time and their detailed application in removing dyes, antibiotics and heavy metals. It has been discussed how graphene and its derivatives exhibit unique electronic, mechanical, structural and thermal properties. In this paper, the mechanism of adsorption and degradation using these graphene-based materials has also been discussed vividly. In addition to this, a bibliographic analysis was performed to identify the trend of research related to graphene and its derivatives in the adsorption and degradation of pollutants round the globe reflected by the publications. Therefore, this review can be instrumental in understanding the fact that further development of graphene-based materials and their mass production can provide a very effective and economical wastewater treatment method.

Highly Efficient Elimination of Pb+2 and Al+3 Metal Ions from Wastewater Using Graphene Oxide/3,5-Diaminobenzoic Acid Composites: Selective Removal of Pb2+ from Real Industrial Wastewater

In this study, graphene oxide (GO) was functionalized with 3,5-diaminobenzoic acid (DABA) by a one-step method to produce functionalized graphene oxide (FGO). FGO is a new type of absorbent crystalline substance that has a high surface area and a large porosity site as well as a large number of dentate functional groups which lead to enhanced adsorption performance for heavy metal ions. The adsorption efficiency of FGO for Pb⁺² and Al⁺³ metal ions was extra satisfactory when compared with GO due to the ease of design and the homogeneous structure of FGO. The structure of synthesized GO and FGO was confirmed by different techniques such as FTIR, XRD, TGA, BET nitrogen adsorption-desorption methods, and TEM analyses. The mass of utilized adsorbents, the pH of the medium, the concentration of ionic species in the medium, temperature, and process time were all investigated as variables in the adsorbent procedure. The experimental data recorded that the maximum adsorption efficiency of the 0.5 g/L FGO composite was 99.7 and 99.8% for Pb⁺² and Al⁺³ metal ions, respectively, while in the case of using GO, the maximum adsorption efficiency was 92.6 and 91.9% at ambient temperature in a semineutral medium at pH 6 after 4 h. The adsorption results were in good conformity with the Freundlich model and pseudo-second-order kinetics for Pb⁺² and Al⁺³ metal ions. Also, the reusability study indicates that FGO can be used repeatedly at least for five cycles with a slight significant loss in its efficiency.

Adsorption of Pesticides, Antibiotics and Microcystin-LR by Graphene and Hexagonal Boron Nitride Nano-Systems: A Semiempirical PM7 and Theoretical HSAB Study

In recent years, graphene (CC) and hexagonal boron nitride (h-BN) have been widely used in water purification and environmental remediation because of their unique physical and chemical properties. Therefore, based on the reaction enthalpy, equilibrium structure, atomic charge, molecular, orbital and electronic spectrum provided by a semiempirical PM7 method, the adsorption of pesticides, antibiotics and microcystin-LR on graphene and hexagonal boron nitride (h-BN) nano-systems was examined. For the adsorption of diazinon, parathion, oxacillin and ciprofloxacin, the results show that as the bond length decreases and the atomic partial charge increases, the adsorption energy increases. The removal efficiency for antibiotics is higher than that for pesticides. Regarding the co-adsorption of pesticides/antibiotics and microcystin-LR on nano-systems, hydrogen bonds play a crucial role in stabilizing the whole structure. In addition, the non-covalent interaction (NCI) diagrams show the adsorption strength of the nano-systems to the pesticides/antibiotics. The energy gap and HSAB global descriptors are calculated based on the energy values of HOMO and LUMO. It is proved that the graphene nano-system has excellent electron-accepting ability, and suitable sensor materials can be designed.

A Comprehensive DFT Investigation of the Adsorption of Polycyclic Aromatic Hydrocarbons onto Graphene

To better understand graphene and its interactions with polycyclic aromatic hydrocarbons (PAHs), density-functional-theory (DFT) computations were used. Adsorption energy is likely to rise with the number of aromatic rings in the adsorbates. The DFT results revealed that the distance between the PAH molecules adsorbed onto the G ranged between 2.47 and 3.98 Å depending on the structure of PAH molecule. The Non-Covalent Interactions (NCI) plot supports the concept that van der Waals interactions were involved in PAH adsorption onto the Graphene (G) structure. Based on the DFT-calculated adsorption energy data, a rapid and reliable method employing an empirical model of a quantitative structure–activity relationship (QSAR) was created and validated for estimating the adsorption energies of PAH molecules onto graphene.