The formulation and physicochemical properties of betaine-based natural deep eutectic solvent

Polymer Electrolytes with High Ionic Conductivities at Freezing Temperature for Aqueous Hybrid Batteries

Rechargeable and flexible aqueous batteries (ABs) have emerged as one of promising energy devices which is primarily due to the safety, environmental friendliness and economic efficiency. However, because of the freezing behavior of aqueous electrolytes, most ABs possess poor performance when the working temperature drops below zero. To solve this problem, a gel polymer electrolyte (GPE) with high ionic conductivity (IC) and frost-resistance is designed for aqueous Zn-Li hybrid batteries by a biomass-based polymers complex consisting of carboxyl modified sodium alginate (SA) and zwitterionic betaine (BA). Introducing iminodiacetic acid to enrich -COOH groups along the SA main chains could improve IC of the prepared GPEs to 41.27 and 20.96 mS cm-1 at 20 and -20 °C, respectively. At -20 °C, the discharge capacity of the resultant cell is two times higher than that of the liquid electrolyte-based cell, and the cell presents a capacity retention of 91.6 % after 300 charge/discharge cycles at 1 C. This proposed strategy greatly improve the IC of GPEs at freezing temperature, which is expected to broaden the practical application of GPEs in wide range of temperature.

Transdermal delivery of elastin peptide assisted by betaine-based deep eutectic solvent to ameliorate skin photoaging

The unique amino acid composition of elastin peptide (EP) makes it an excellent resource to obtain antioxidant peptides. It exhibits high elastase inhibitory activity with the potential to resist skin aging and is currently used in a many cosmetic products. However, the inherent low permeability of the skin limits its ability to penetrate the skin. To address this issue, a deep eutectic solvent (SAB) with excellent bioactivity was synthesized from betaine and succinic acid and used as a permeation enhancer to improve the absorption and utilization of EP in this paper. The results showed that low SAB concentrations significantly increased the transdermal delivery of EP. The 3D epidermal skin model (EpiKutis®) demonstrated that SAB/EP induced the synthesis of hyaluronic acid (HA) and filaggrin (FLG), accelerated skin barrier repair, and reduced water loss. Additionally, the zebrafish embryonic model showed that SAB/EP could reduce melanin secretion, decrease melanin deposition, and have an ameliorative effect on skin photoaging. Cellular experiments proved that SAB/EP can stimulate human skin fibroblasts to secrete procollagen I and elastin, improving skin elasticity and anti-wrinkle. The combination of EP and DES is a new attempt that is expected to be used as a safe and effective anti-wrinkle cosmetic material.

Glucomannan isolation from porang (Amorphophallus muelleri Blume) flour using natural deep eutectic solvents and ethanol: A comparative study

Ethanol is a common solvent to isolate glucomannan from porang (Amorphophallus muelleri Blume) flour (NPF). This study investigated the use of natural deep eutectic solvents (NADESs) in glucomannan isolation from NPF. NADESs formed by the hydrogen bond acceptors (choline chloride and betaine) and the hydrogen bond donors (glycerol, 1,2-propanediol, formic acid, and acetic acid) in varying molar ratios of 1:2, 1:3, and 1:4 were characterized to optimize glucomannan isolation. The results showed that higher molar ratios of NADES tended to yield porang glucomannan flour (PGF) with higher glucomannan content and viscosity. The gel of PGF exhibited pseudoplastic behavior. The FTIR spectra indicated that betaine-based NADES removed the acetyl groups from glucomannan chains. The PGF obtained from NADESs with a molar ratio of 1:4 was comparable to those obtained from ethanol with a glucomannan content of 87.34 %-93.28 % and a weight-average molecular weight of 9.12 × 105-1.20 × 106 g/mol.

Extraction and characterisation of kudzu root residue lignin based on deep eutectic solvents

INTRODUCTION

Lignin has great potential as the most abundant renewable phenolic polymer. Studies have shown that lignin structure varies depending on different sources and different extraction methods. However, there are few studies on lignin in kudzu root residue.

OBJECTIVES

The aim of the study was to explore optimal extraction conditions of Pueraria lobata residue lignin (PLL) with deep eutectic solvents (DESs) and characterise the structure and morphology of PLL.

METHODS

Firstly, the chemical composition of kudzu root residue was determined by the Van-soest method. Then, betaine was used as hydrogen bond acceptor (HBA), nine kinds of common acids and alcohol were selected as hydrogen bond donor (HBD) to synthesise a DES to extract lignin from kudzu root residue. The influence of conditions on the extraction of PLL was explored by a betaine-based DES according to a single-factor experiment, and then the best process of PLL extraction was determined by an orthogonal experiment. Finally, the morphology and structure of PLL were analysed by scanning electron microscope (SEM), thermogravimetric analysis (TGA), gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and NMR.

RESULTS

Cellulose, hemicellulose, lignin, and ash content in kudzu root residue were 41.13%, 16.39%, 25.03%, and 0.41%, respectively. When the DES consisted of betaine and formic acid, the solid-liquid ratio was 1:45, the extraction time was 5.5 h at 160°C, the extraction yield of lignin was 89.29%, and the purity was 83.01%. PLL was composed of interconnected spherical particles with good thermal stability and narrow polydispersity index (PDI) distribution. FTIR and 2D-heteronuclear singular quantum correlation (HSQC) NMR illustrated that PLL was a typical G-type and S-type lignin.

CONCLUSION

This study would fill the gap of research on lignin in kudzu root residue and provide a theoretical reference for the utilisation of lignin in kudzu roots as well as a new thinking for the recycling of kudzu root resources.

Ultrasound-Assisted Extraction of Phenolic Compounds from Celtuce (Lactuca sativa var. augustana) Leaves Using Natural Deep Eutectic Solvents (NADES): Process Optimization and Extraction Mechanism Research

Natural deep eutectic solvents (NADESs), as emerging green solvents, can efficiently extract natural products from natural resources. However, studies on the extraction of phenolic compounds from celtuce (Lactuca sativa var. augustana) leaves (CLs) by NADESs are still lacking. This study screened the NADES L-proline-lactic acid (Pr-LA), combined it with ultrasound-assisted extraction (UAE) to extract phenolic compounds from CLs, and conducted a comparative study on the extraction effect with traditional extraction solvents. Both SEM and FT-IR confirmed that Pr-LA can enhance the degree of fragmentation of cell structures and improve the extraction rate of phenolic compounds. Molecular dynamics simulation results show that Pr-LA can improve the solubility of phenolic compounds and has stronger hydrogen bonds and van der Waals interactions with phenolic compounds. Single-factor and Box-Behnken experiments optimized the process parameters for the extraction of phenolic compounds from CLs. The second-order kinetic model describes the extraction process of phenolic compounds from CLs under optimal process parameters and provides theoretical guidance for actual industrial production. This study not only provides an efficient and green method for extracting phenolic compounds from CLs but also clarifies the mechanism of improved extraction efficiency, which provides a basis for research on the NADES extraction mechanism.

Green Extraction of Depsidones and Depsides from Hypogymnia physodes (L.) Nyl. Using Natural Deep Eutectic Solvents

Various studies have shown that Hypogymnia physodes are a source of many biologically active compounds, including lichen acids. These lichen-specific compounds are characterized by antioxidant, antiproliferative, and antimicrobial properties, and they can be used in the cosmetic and pharmaceutical industries. The main aim of this study was to optimize the composition of natural deep eutectic solvents based on proline or betaine and lactic acid for the extraction of metabolites from H. physodes. The design of the experimental method and the response surface approach allowed the optimization of the extraction process of specific lichen metabolites. Based on preliminary research, a multivariate model of the experiment was developed. For optimization, the following parameters were employed in the experiment to confirm the model: a proline/lactic acid/water molar ratio of 1:2:2. Such a mixture allowed the efficient extraction of three depsidones (i.e., physodic acid, physodalic acid, 3-hydroyphysodic acid) and one depside (i.e., atranorin). The developed composition of the solvent mixtures ensured good efficiency when extracting the metabolites from the thallus of H. physodes with high antioxidant properties.

Anti-Freezing and Ultrasensitive Zwitterionic Betaine Hydrogel-Based Strain Sensor for Motion Monitoring and Human-Machine Interaction

Ultrasensitive and reliable conductive hydrogels are significant in the construction of human-machine twinning systems. However, in extremely cold environments, freezing severely limits the application of hydrogel-based sensors. Herein, building on biomimetics, a zwitterionic hydrogel was elaborated for human-machine interaction employing multichemical bonding synergies and experimental signal analyses. The covalent bonds, hydrogen bonds, and electrostatic interactions construct a dense double network structure favorable for stress dispersion and hydrogen bond regeneration. In particular, zwitterions and ionic conductors maintained excellent strain response (99 ms) and electrical sensitivity (gauge factor = 14.52) in the dense hydrogel structure while immobilizing water molecules to enhance the weather resistance (-68 °C). Inspired by the high sensitivity, zwitterionic hydrogel-based strain sensors and remote-control gloves were designed by analyzing the experimental signals, demonstrating promising potential applications within specialized flexible materials and human-machine symbiotic systems.

Sustainable conversion of cottonseed hulls to valuable proanthocyanidins through ultrasound-assisted deep eutectic solvent extraction

This study presents a novel approach for converting cottonseed hulls (CSHs) into valuable proanthocyanidins (PAs) through deep eutectic solvent (DES)-based ultrasound-assisted extraction (UAE-DES). Response surface methodology (RSM) was applied to optimize and model this process, resulting in maximum yields of 78.58 mg/g. The ideal PA extraction conditions were determined to be a liquid-to-material ratio of 36.25 mL/g, a water content of 33.21%, and an extraction period of 7.4 min. Molecular dynamic simulations (MDS) were performed to study the interactions between the solvent and target chemicals. Increased van der Waals forces and stronger interactions between DES and the target chemical catechin (CA) compared to those observed with methanol or water were observed. Furthermore, the optimized extract exhibited a higher PA content than can be obtained with conventional extraction methods and demonstrated antioxidant activity in vitro. The cottonseed hulls residues (CSRs) remaining after the extraction process can be used to produce activated carbon (ACCSR), which has some capacity to adsorb methylene blue (MB) contaminants. This study offers a reference for the fruitful transformation of waste biomass into high-value products.

Deep Eutectic Solvents: An Eco-friendly Design for Drug Engineering

In the spirit of circular economy and sustainable chemistry, the use of environmentally friendly chemical products in pharmacy has become a hot topic. In recent years, organic solvents have been the subject of a great range of restriction policies due to their harmful effects on the environment and toxicity to human health. In parallel, deep eutectic solvents (DESs) have emerged as suitable greener solvents with beneficial environmental impacts and a rich palette of physicochemical advantages related to their low cost and biocompatibility. Additionally, DESs can enable remarkable solubilizing effect for several active pharmaceutical ingredients (APIs), thus forming therapeutic DESs (TheDESs). In this work, special attention is paid to DESs, presenting a precise definition, classification, methods of preparation, and characterization. A description of natural DESs (NaDESs), i. e., eutectic solvents present in natural sources, is also reported. Moreover, the present review article is the first one to detail the different approaches for judiciously selecting the constituents of DESs in order to minimize the number of experiments. The role of DESs in the biomedical and pharmaceutical sectors and their impact on the development of successful therapies are also discussed.

Everything You Wanted to Know about Deep Eutectic Solvents but Were Afraid to Be Told

Are deep eutectic solvents (DESs) a promising alternative to conventional solvents? Perhaps, but their development is hindered by a plethora of misconceptions. These are carefully analyzed here, beginning with the very meaning of DESs, which has strayed far beyond its original scope of eutectic mixtures of Lewis or Brønsted acids and bases. Instead, a definition that is grounded on thermodynamic principles and distinguishes between eutectic and deep eutectic is encouraged, and the types of precursors that can be used to prepare DESs are reviewed. Landmark works surrounding the sustainability, stability, toxicity, and biodegradability of these solvents are also discussed, revealing piling evidence that numerous DESs reported thus far, particularly those that are choline based, lack sufficient sustainability-related traits to be considered green solvents. Finally, emerging DES applications are reviewed, emphasizing their most remarkable feature: the ability to liquefy a solid compound with a target property, allowing its use as a liquid solvent.

Enhanced Recovery of Natural Antioxidants from Grape Waste Using Natural Eutectic Solvents-Based Microwave-Assisted Extraction

The evaluation of sustainable solvents as alternatives to more harmful conventional solvents combined with intensification techniques to recover phenolic compounds from agri-food waste is in the spotlight. The wine industry generates large amounts of waste as a consequence of grape processing operations, which can be revalued by solvent extraction of valuable antioxidants for food and fine chemical applications. Therefore, the present study focuses on the use of natural eutectic solvents (NAESs) with benign environmental, health, and safety profiles, for valorization of grape waste in the context of a circular economy. Herein, up to 15 NAESs consisting of combinations of three hydrogen bond acceptors (choline chloride, L-proline, and betaine) and four hydrogen bond donors (1,2-propanediol, glycerol, and 1,2- and 1,3-butanediol) were evaluated for antioxidant recovery. After an initial screening of the performance of NAESs by conventional extraction, the process was intensified by microwave-assisted extraction (MAE). The extracts were analyzed by UV/VIS spectrophotometric and HPLC methods. Promising results were obtained with the solvent betaine, 1,2-butanediol [1:4], using MAE at 100 °C for 3 min. Overall, the proposed NAESs-based MAE method was successfully applied to recover target compounds from grape waste, with great prospects for the antioxidants market and sustainable development for the winery sector.