IR, Raman, SERS and DFT study of amoxicillin

High-yield fabrication of monodisperse multilayer nanofibrous microparticles for advanced oral drug delivery applications

Recent advances in the use of nano- and microparticles in drug delivery, cell therapy, and tissue engineering have led to increasing attention towards nanostructured microparticulate formulations for maximum benefit from both nano- and micron sized features. Scalable manufacturing of monodisperse nanostructured microparticles with tunable size, shape, content, and release rate remains a big challenge. Current technology, mainly comprises complex multi-step chemical procedures with limited control over these aspects. Here, we demonstrate a novel technique for high-yield fabrication of monodisperse monolayer and multilayer nanofibrous microparticles (MoNami and MuNaMi respectively). The fabrication procedure includes sequential electrospinning followed by micro-cutting at room temperature and transfer of particles for collection. The big advantage of the introduced technique is the potential to apply several polymer-drug combinations forming multilayer microparticles enjoying extracellular matrix (ECM)-mimicking architecture with tunable release profile. We demonstrate the fabrication and study the factors affecting the final three-dimensional structure. A model drug is encapsulated into a three-layer sheet (PLGA-pullulan-PLGA), and we demonstrate how the release profile changes from burst to sustain by simply cutting particles out of the electrospun sheet. We believe our fabrication method offers a unique and facile platform for realizing advanced microparticles for oral drug delivery applications.

SERS substrate based on COF@Ag for detecting amoxicillin in honey and lake water

This study presents the design of a Surface-enhanced Raman scattering (SERS) substrate, COF@Ag, for the sensitive detection of Amoxicillin (AMX) in lake water and honey. Furthermore, the study investigates the role of covalent organic frameworks (COFs) in SERS detection. The characterization results demonstrate the capability of COFs to efficiently enrich Ag nanoparticles (AgNPs), resulting in a more concentrated distribution of hotspots and an enhanced electromagnetic field on the substrate. By employing density functional theory (DFT) simulation, the frontier electronic orbitals of COFs and AMX were analyzed, and the chemical bonds and weak interactions in the system were examined using the Interaction Region Indicator (IRI) method to propose potential enhancement mechanisms. In aqueous solutions, the linear range is 1 μg/L-30 μg/L, with a limit of detection (LOD) 0.279 μg/L. In lake water, the linear range span from 100 μg/L to 500 μg/L, with a detection limit of 8.244 μg/L. For honey, the linear range extend from 20 ng/g to 100 ng/g, with a detection limit of 2.917 ng/g. This method holds key significance in facilitating the rapid detection of amoxicillin and advancing the application of COFs in SERS.

Amoxicillin removal from water by adsorption on activated carbon of mineral sources: discussion of experimental data, mechanisms and modeling

The use of antibiotics has increased considerably in the last decades in human medicine, as well as agriculture and animal production. Consequently, high loads of these emerging contaminants in the environment can increase antibiotic-resistant genes and the development of multi-resistant pathogenic microorganisms. This work aims to evaluate the removal of amoxicillin trihydrate in aqueous medium using mineral-activated carbon of bituminous origin as an adsorbent. The adsorbent was classified as microporous with associated mesopores, showing phenolic groups on its surface, which indicates the versatility of the adsorbent. The adsorption kinetics and isotherms were predominantly chemical. Pseudo-second-order model, as well as LDF model adjusted to the kinetic data. Sips and Langmuir isotherms adjusted to the adsorption equilibrium data. The maximum adsorptive capacity obtained experimentally was 313.30 mg g-1 at 50°C. The thermodynamic properties suggested spontaneous, monolayer, and endothermic adsorption. Overall, compared to previous works, the adsorbent proved to be a viable and promising alternative for the removal of antibiotics from water, with high adsorption capacity of amoxicillin, without being necessary to perform any prior changes to the material.

Liposomal encapsulation of amoxicillin via microfluidics with subsequent investigation of the significance of PEGylated therapeutics

With an increasing concern of global antimicrobial resistance, the efforts to improve the formulation of a narrowing library of therapeutic antibiotics must be confronted. The liposomal encapsulation of antibiotics using a novel and sustainable microfluidic method has been employed in this study to address this pressing issue, via a targeted, lower-dose medical approach. The study focusses upon microfluidic parameter optimisation, formulation stability, cytotoxicity, and future applications. Particle sizes of circa. 130 nm, with viable short-term (28-day) physical stability were obtained, using two different non-cytotoxic liposomal formulations, both of which displayed suitable antibacterial efficacy. The microfluidic method allowed for high encapsulation efficiencies (≈77 %) and the subsequent in vitro release profile suggested high limits of antibiotic dissociation from the nanovessels, achieving 90% release within 72 h. In addition to the experimental data, the growing use of poly(ethylene) glycol (PEG) within lipid-based formulations is discussed in relation to anti-PEG antibodies, highlighting the key pharmacological differences between PEGylated and non-PEGylated formulations and their respective advantages and drawbacks. It's surmised that in the case of the formulations used in this study, the addition of PEG upon the liposomal membrane would still be a beneficial feature to possess owing to beneficial features such as stability, antibiotic efficacy and the capacity to further modify the liposomal membrane.

Insights on the Synthesis of Al-MCM-41 with Optimized Si/Al Ratio for High-Performance Antibiotic Adsorption

Studies indicate that approximately two-thirds of the rivers of the world are contaminated by pharmaceutical compounds, especially antibiotics and hormones. Data reported by the World Health Organization (WHO, 2015) revealed an increase of 65% in antibiotic consumption between 2000 and 2015, with a worldwide increase of 200% expected up to 2030. Environmental contamination by antibiotics and their metabolites can cause the alteration of bacterial genes, leading to the generation of superbacteria. In this work, adsorption was explored as a strategy to mitigate antibiotic contamination, proposing the use of the Al-MCM-41 mesoporous material as an efficient and high-capacity adsorbent. Evaluation of the influence of the synthesis parameters enabled understanding of the main variables affecting the adsorption capacity of Al-MCM-41 for the removal of a typical antibiotic, amoxicillin (AMX). It was found that the adsorbent composition and specific surface area were the main factors that should be optimized in order to obtain the highest AMX removal capacity. Using statistical tools, the best Si/Al ratio in Al-MCM-41 was found to be 10.5, providing an excellent AMX uptake of 132.2 mg per gram of adsorbent. The Si/Al ratio was the most significant factor affecting the adsorption. The cation-π interactions increased with an increase of the Al content, while the interactions involving silanols (Yoshida H-bonding and dipole-dipole hydrogen bridges) decreased.

Integrated Tandem Electrochemical-chemical-electrochemical Coupling of Biomass and Nitrate to Sustainable Alanine

Alanine is widely employed for synthesizing polymers, pharmaceuticals, and agrochemicals. Electrocatalytic coupling of biomass molecules and waste nitrate is attractive for the nitrate removal and alanine production under ambient conditions. However, the reaction efficiency is relatively low due to the activation of the stable substrates, and the coupling of two reactive intermediates remains challenging. Herein, we realize the integrated tandem electrochemical-chemical-electochemical synthesis of alanine from the biomass-derived pyruvic acid (PA) and waste nitrate (NO3 - ) catalyzed by PdCu nano-bead-wires (PdCu NBWs). The overall reaction pathway is demonstrated as a multiple-step catalytic cascade process via coupling the reactive intermediates NH2 OH and PA on the catalyst surface. Interestingly, in this integrated tandem electrochemical-chemical-electrochemical catalytic cascade process, Cu facilitates the electrochemical reduction of nitrate to NH2 OH intermediates, which chemically couple with PA to form the pyruvic oxime, and Pd promotes the electrochemical reduction of pyruvic oxime to the desirable alanine. This work provides a green strategy to convert waste NO3 - to wealth and enriches the substrate scope of renewable biomass feedstocks to produce high-value amino acids.

One-step quaternization and macromolecular reconstruction to prepare micro-/nano-porous cellulose beads from homogeneous solution for low-concentration amoxicillin removal

Designing advanced functional cellulose-based materials by one-step homogeneous preparation technology is a great challenge since cellulose is insoluble in common solvents or difficult to regenerate and shape. Quaternized cellulose beads (QCB) were prepared from a homogeneous solution by one-step cellulose quaternization homogeneous modification and macromolecules' reconstruction technology. Morphological and structural characterizations of QCB were conducted by SEM, FTIR and XPS, etc. The adsorption behavior of QCB was studied using amoxicillin (AMX) as a model molecule. The adsorption of QCB for AMX was multilayer adsorption controlled by both physical adsorption and chemical adsorption. The removal efficiency for 60 mg L^-1 AMX reached 98.60 % through electrostatic interaction, and the adsorption capacity reached 30.23 mg g^-1. AMX adsorption was almost reversible without loss of binding efficiency after three cycles. This facile and green method may offer a promising strategy for the development of functional cellulose materials.

Preparation, characterization, and evaluation of antibacterial and cytotoxic activity of chitosan-polyethylene glycol nanoparticles loaded with amoxicillin as a novel drug delivery system

In this study, nanoparticles of amoxicillin (AMX) were prepared using chitosan (CHI) and polyethylene glycol (PEG). The physicochemical properties of the particles were investigated by FT-IR, DSC, SEM, and zeta potential analyses. The nanoparticles showed a spherical shape, and the average size of formulations was within the range of 696.20 ± 24.86 - 359.53 ± 7.41 nm. Zeta potential data demonstrated that the formulations had positive surface charges with a zeta potential range of 21.38 ± 2.28 - 7.73 ± 1.66 mV. FTIR analysis showed that the drug was successfully entrapped in the nanoparticles. DSC results suggested that the drug was present in amorphous form in the polymer matrix. In vitro release studies demonstrated that the release pattern consisted of two phases, with an initial burst release followed by a controlled and sustained release. The MTT assay results on mouse fibroblast cell line indicated that the prepared formulations did not affect the viability of the cells. In the in vitro antibacterial activity test, it was found that the drug-loaded nanoparticles have AMX-equivalent antibacterial activity against E. coli, and S. aureus. These findings revealed that the obtained nanoparticles might be a promising and safe nanocarrier system for efficient delivery of AMX.

Topically Applied Biopolymer-Based Tri-Layered Hierarchically Structured Nanofibrous Scaffold with a Self-Pumping Effect for Accelerated Full-Thickness Wound Healing in a Rat Model

Wound healing has grown to be a significant problem at a global scale. The lack of multifunctionality in most wound dressing-based biopolymers prevents them from meeting all clinical requirements. Therefore, a multifunctional biopolymer-based tri-layered hierarchically nanofibrous scaffold in wound dressing can contribute to skin regeneration. In this study, a multifunctional antibacterial biopolymer-based tri-layered hierarchically nanofibrous scaffold comprising three layers was constructed. The bottom and the top layers contain hydrophilic silk fibroin (SF) and fish skin collagen (COL), respectively, for accelerated healing, interspersed with a middle layer of hydrophobic poly-3-hydroxybutyrate (PHB) containing amoxicillin (AMX) as an antibacterial drug. The advantageous physicochemical properties of the nanofibrous scaffold were estimated by SEM, FTIR, fluid uptake, contact angle, porosity, and mechanical properties. Moreover, the in vitro cytotoxicity and cell healing were assessed by MTT assay and the cell scratching method, respectively, and revealed excellent biocompatibility. The nanofibrous scaffold exhibited significant antimicrobial activity against multiple pathogenic bacteria. Furthermore, the in vivo wound healing and histological studies demonstrated complete wound healing in wounded rats on day 14, along with an increase in the expression level of the transforming growth factor-β1 (TGF-β1) and a decrease in the expression level of interleukin-6 (IL-6). The results revealed that the fabricated nanofibrous scaffold is a potent wound dressing scaffold, and significantly accelerates full-thickness wound healing in a rat model.

Preparation of SiO2@Ag@molecular imprinted polymers hybrid for sensitive and selective detection of amoxicillin using surface-enhanced Raman scattering

In this work, we fabricated a 300 nm-sized silver-coated silica (SiO₂@Ag) SERS substrate. Based on SiO₂@Ag, we designed SiO₂@Ag@molecular imprinted polymers (SiO₂@Ag@MIPs) to realize selectively detection of amoxicillin by coating a molecular imprinted layer averagely thinner than 10 nm on SiO₂@Ag. The as-prepared SERS-active substrate demonstrates excellent enhancement for amoxicillin as well as the enhancement factors were 1.63 × 10⁶ of SiO₂@Ag@MIPs and 2.97 × 10⁵ of SiO₂@Ag, respectively. The SiO₂@Ag@MIPs core-shell hybrids as SERS substrates and the minimum detectable concentration of amoxicillin was as low as 2.7 × 10^-9 M, and the detection limit of SiO₂@Ag was 2.7 × 10^-7 M. The linear relationship between intensities of characteristic peaks and concentrations of amoxicillin was established. Both SiO₂@Ag and SiO₂@Ag@MIPs substrates were highly sensitive and could achieve qualitative and semi-quantitative analysis of amoxicillin in aqueous media with good linear correlations. Based on the above, SiO₂@Ag@MIPs will be conducive to detecting actual samples and expanding the practical application.

Ultrasensitive detection of amoxicillin using the plasmonic silver nanocube as SERS active substrate

Even though amoxicillin is used as an antibacterial drug in some foods such as fish, chick, etc. However, the use of amoxicillin in the food industry is prohibited. Therefore, rapid detection and sensitive detection at ultra-low concentration of amoxicillin is very important for human. Surface enhanced Raman scattering (SERS) is fast and reliable method to determine the molecules at ultra-low concentration. In this study, silver nanocubes were synthesized and used as SERS active substrate. The synthesized Ag NCs exhibit an excellent sensitivity towards the detection of amoxicillin at the lowest concentration of 10^-9 M based on the effect resulting from Ag NCs leading to the high electromagnetic effect and chemical mechanism. The dynamic linear regression between the Raman intensity and amoxicillin concentration over seven orders of magnitude (from 10^-4 to 10^-9 M) was excellent with high reliability (R² = 0.99). On the one hand, SERS substrate can be used after storing for 20 days. Because Ag NCs also demonstrated remarkable recyclability, reproducibility, and chemical stability. As a result, Ag NCs can be used as a potential SERS substrate to detect amoxicillin at ultra-low concentration.

Total removal of amoxicillin from water using magnetic core nanoparticles functionalized with silver

Framed in the problem of emerging pollutants, in this work we introduce a novel procedure for the total removal of amoxicillin from water samples using magnetic nanoparticles functionalized with nanometric silver (Fe₃O₄@AgNPs). Experimental conditions such as pH, contact time, temperature, as well as adsorbate and adsorbent doses have been studied to achieve the total adsorption for different concentrations of amoxicillin in water. Particularly, for concentrations 10 and 100 mg L^-1, a maximum removal efficiency of 100% was reached at room temperature and pH = 7 after 15 min of contact time between adsorbent and water samples under gentle shaking. The doses of adsorbent employed to remove 10 and 100 mg L^-1 of amoxicillin were 100 and 500 μL, respectively. Characterization of the adsorbent surfaces was performed by Scanning and Transmission Electron Microscopy, Energy Dispersive X-ray Spectroscopy, BET analysis and Fourier-transform infrared spectroscopy. Recycling studies were carried out employing 500 μL of NaOH solution 1 M during 15 min in order to explore desorption and reuse of the adsorbent, showing that Fe₃O₄@AgNPs remains unaltered and can be used for two more additionally adsorption cycles, exhibiting 93% adsorption efficiency after the third regeneration. The characterization of equilibrium isotherms and thermodynamics reveal a Langmuir-type endothermic chemisorption.

Molecular–substrate interaction on dynamic SERS detection of butylated hydroxyanisole on a silver nano-tripod substrate

A SERS enhancement model with a surface adsorption effect is proposed by dynamical SERS analysis of butylated hydroxyanisole on a silver nano-tripod substrate.

SERS of Dopamine: Computational and experimental studies

Computational and experimental studies have been carried out on Dopamine. The calculated Raman spectra of Dopamine with and without Silver clusters (Ag_n (n = 1-4)) are compared with each other and it is shown that the intensity of the Raman activity increases with increasing number of silver atoms. The SERS effect shown by this system is further supported by calculating the Global electrophilicity index ω, the static mean polarizability α₀, and the anisotropy of the polarizabilities Δα. Stabilities of the complexes are analysed using the charge transfer, stabilization energies, and interaction energies. The reactive parameters for these complexes were further supported by looking at the molecular electrostatic potential (MESP) surfaces. SERS substrates were fabricated by sintering silver nanoparticle paste onto a fused silica substrate, using a femtosecond laser. Detection of Dopamine up to 1 μM is reported using the SERS substrates.

Removal of Drugs in Polluted Waters with Char Obtained by Pyrolysis of Hair Waste from the Tannery Process

The presence and final destination of pharmaceutical compounds in waters constitute one of the emerging events in current environmental chemistry. Two widely consumed compounds have been evaluated in this study, amoxicillin (AMOX) and diclofenac (DFC), at a concentration of 200 mg L-1. The presence of both in wastewater has been verified, generating problems in ecosystems and human health. Pyrolysis of hair waste from a tannery process was performed in a fixed-bed reactor. Char was obtained at different operating temperatures (300, 350, 400, and 450 °C), which underwent a characterization of heavy metals and elemental composition. An activation process was applied to the char obtained at 450 °C by means of physicochemical processes and with two chemical agents (KOH and K2CO3). For the removal of drugs, two separate tests were performed, one for 28 days and the other one for 4 h, to assess the efficiency and the percentage of removal. It was found that the char obtained at 450 °C is the one that removes most of both compounds: more than 90% of AMOX and more than 80% of DFC.

Characterization of chitosan-lysine surfactant bioactive coating on silicone substrate

Chitosan (Chi) and anionic surfactant derived from lysine (77KS) were used to prepare a novel bioactive coating and as a drug delivery system for amoxicillin (AMOX) on a model polydimethylsiloxane (PDMS) surface. The bioactive coating was formulated as polyelectrolyte-surfactant complex (PESC). Aggregation behaviour between the cationic Chi and oppositely charged 77KS in bulk was analysed using turbidity and ζ-potential measurement. Furthermore, the adsorption and stability of the formulations were evaluated using quartz crystal microbalance with dissipation (QCM-D). The effect of the ionic strength and of the ultraviolet/ozone (UVO) activation of the PDMS films on the adsorption behaviour of the PESC complex was also examined. QCM-D monitoring showed stable adsorption of bare and AMOX-loaded complex on non-activated PDMS films, while the coating on UVO-activated PDMS samples desorbed after the rinsing step. Finally, X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed successful and homogenously distributed compounds.

IR, Raman and SERS analysis of amikacin combined with DFT-based calculations

Amikacin, a molecule formed by two glucosamine rings linked by α-linkages through a central deoxystreptamine, is an antibiotic often used in clinical treatments, with a special attention in the pediatric cases, due to the physiological activity of their renal system. In spite of its extensive use, no detailed information about the vibrational features of the molecule is available in the literature. Thus, in this study we performed a comprehensive vibrational investigation of amikacin from both an experimental and theoretical point of view. Raman and IR spectroscopy combined with DFT calculations conducted to a complete vibrational characterization of the molecule, with the assignment of the vibrational modes. Moreover, SERS spectrum was recorded and analyzed and provided information about the adsorption behavior of the amikacin on the silver nanoparticles surface.

Competitive Association of Antibiotics with a Clay Mineral and Organoclay Derivatives as a Control of Their Lifetimes in the Environment

A Na-smectite clay mineral (Na-Mt) was exchanged with two concentrations of benzyldimethyltetradecyl ammonium chloride cationic surfactant up to one time the cation exchange capacity. Nonionic organoclay was prepared with polyoxyethylene (20) oleyl ether (Brij-O20) nonionic surfactant at one concentration. The resulting organoclays displayed lateral layer organization of the surfactants within their interlayer space.. The adsorption properties of these organoclays and the starting raw clay mineral were evaluated for three extensively used antibiotic pharmaceutical products: the amoxicillin (AMX), the sulfamethoxazole (SMX), and the trimethoprim (TRI), recognized as recalcitrant compounds to conventional water treatments and to display a complex behavior for different pH and temperature experimental conditions. Besides showing short half-life time with possible degradation by UV radiation, these antibiotics associated with mineral phases cause serious environmental issues of which the toxic effect can be exacerbated in the presence of other chemical compounds. From the set of data obtained by complementary techniques: UV and Fourier transform infrared spectroscopy, high-performance liquid chromatography coupled with mass spectrometry, and X-ray diffraction, it appears that the nonionic organoclay shows its versatility for the adsorption of individual molecules as well as a pool of antibiotics. The mixing of the three antibiotics showing different electric charged species (cations, anions, and zwitterions) mimics the natural context drives to a deep modification of the adsorption behavior onto the different materials that can act as possible carrier mineral phases in aquatic environment. These competition effects can be measured through the significant decrease of the K _F Freundlich constants for AMX in the presence of other molecules (or electrolytes), whereas TRI and SMX, by their possible association, create a synergistic effect that favors their adsorption on the whole layered materials.

Magnetically triggered release of amoxicillin from xanthan/Fe3O4/albumin patches

This work was motivated by the need of stimuli responsive drug carriers, which can be activated by low cost non-invasive stimuli such as external magnetic field (EMF). Thus, novel antimicrobial materials based on xanthan gum (XG), magnetic nanoparticles (MNP), bovine serum albumin (BSA) and amoxicillin (Amox) were designed in order to promote the release of Amox under magnetic stimuli. Firstly, surfaces with different functionalities were prepared by sequential deposition of thin layers on Si wafers and characterized by means of ellipsometry and atomic force microscopy. Amox adsorbed preferentially onto XG or BSA films. In solution, favorable interactions between Amox and BSA were evidenced by substantial changes in the BSA secondary structure, as revealed by circular dichroism. Patches of XG and XG/MNP/BSA were immersed in 2 g L^-1 Amox, yielding 10 ± 3 and 17 ± 4 μg/cm³ Amox loading, respectively. The inclusion of 0.2 wt% Fe₃O₄ in the patches and their exposure to EMF enabled in vitro release of Amox, at pH 5.5 and 0.02 mol L^-1 NaCl, following the quasi-Fickian behavior. Amox diffused from XG/MNP/BSA patches in agar medium containing Staphylococcus aureus and Escherichia coli, inhibiting their growth. The inhibition of E. coli growth was particularly efficient under EMF.

Design of Magnetic Polymeric Particles as a Stimulus-Responsive System for Gastric Antimicrobial Therapy

The treatment of peptic ulcers induced by H. pylori remains challenging due to the deep mucous layer location of bacteria preventing antimicrobial drug access. The present work aimed to design and evaluate in vitro dual responsive (both pH and magnetic field-sensitive) polymeric magnetic particles loaded with amoxicillin as a smart drug carrier for deep mucous layer penetration and in situ drug release. Magnetite particles were produced by the co-precipitation method and subsequently coated with the Eudragit^®S100 and amoxicillin by using the spray-drying technique. The physicochemical characterization of the obtained particles was carried out by optical and scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibrating sample magnetometry. Additionally, drug release tests and antibacterial activity tests were evaluated in vitro. Microparticles presented 17.2 ± 0.4 μm in size and their final composition was 4.3 ± 1.5% of amoxicillin, 87.0 ± 2.3% of Eudragit, and 9.0 ± 0.3% of magnetite. They were both pH and magnetic field responsive while presenting antimicrobial activity. On one side, magnetic field responsiveness of particles is expected to prompt them to reach bacterium niche in deep mucous layer by means of magnetic forces. On the other side, pH responsiveness is expected to enable drug release in the neutral pH of the deep mucous layer, preventing undesired delivery in the acidic gastric lumen. Smart microparticles were designed presenting both pH and magnetic field responsiveness as well as antimicrobial activity. These may be promising assets for peptic ulcer treatment.

Antimicrobials tethering on suture surface through a hydrogel: a novel strategy to combat postoperative wound infections

The present study aimed to develop a novel biocompatible suture biomaterial from Eri silk waste to avoid surgical site infections.

Plasmonic nanostructures for surface enhanced spectroscopic methods

The development within the last five years in the field of surface enhanced spectroscopy methods was comprehensively reviewed.

The removal of amoxicillin from wastewater using organobentonite

Organobentonites used as absorbents to remove amoxicillin from wastewater have been investigated here because they are effective in removing organic pollutants. It is evident that bentonite modified with hexadecyl trimethyl ammonium (DK1) can effectively remove amoxicillin from aqueous solution. Batch experiments showed that the adsorption of amoxicillin onto DK1 fitted well to a pseudo second-order kinetic model with corresponding rate constants (0.0187 g/mg min at 20 °C). The Langmuir isotherm provided the highest adsorption capacity (26.18 mg/g at 20 °C). Our thermodynamic study suggested that the adsorption of amoxicillin onto DK1 was physisorptive and endothermic in nature. Furthermore DK1 was characterized by scanning electronic microscopy (SEM), Specific Surface Area (SSA), X-ray powder diffraction (XRD) and Fourier Transform Infrared (FTIR) spectrometer. These characterizations provided evidence of the morphological properties and how well the adsorption process performed. An adsorption mechanism including both ion-exchange and partition was proposed. Finally, DK1 was used to remove amoxicillin from wastewaters and the results showed 81.9% and 87.5% of amoxicillin was removed at 19.0 mg/L and 2.0 mg/L, respectively.

Modification of TiO(2) nanotube surfaces by electro-spray deposition of amoxicillin combined with PLGA for bactericidal effects at surgical implantation sites

OBJECTIVE

To fabricate the antibiotic-releasing coatings on TiO(2) nanotube surfaces for wide applications of implant and bone plate in medical and dental surgery, the optimal deposition time of amoxicillin/PLGA solution simultaneously performing non-toxicity and a high bactericidal effect for preventing early implant failures was found.

MATERIALS AND METHODS

FE-SEM, ESD and FT-IR were used for confirming deposition of amoxicillin/PLGA on the TiO(2) surface. Also, the elution of amoxicillin/PLGA in a TiO(2) nanotube surface was measured by a UV-VIS spectrophotometer. The bactericidal effect of amoxicillin on the TiO(2) nanotube surface was evaluated by using Staphylococcus aureus (S. aureus). The cytotoxicity and cell proliferation were observed by WST assay using MC3T3-E1 osteoblast cells.

RESULTS

The results indicated that the TiO(2) nanotube surface controlled by electro-spray deposition time with amoxicillin/PLGA solution could provide a high bactericidal effect against S. aureus by the bactericidal effect of amoxicillin, as well as good osteoblast cell proliferation at the TiO(2) nanotube surface without toxicity.

CONCLUSIONS

This study used electro-spray deposition (ESD) methodology to obtain amoxicillin deposition in nanotube structures of TiO(2) and found the optimal deposition time of amoxicillin/PLGA solution simultaneously performing non-toxicity and a high bactericidal effect for preventing early implant failures.

Surface-enhanced Raman spectroscopy (SERS): progress and trends

Surface-enhanced Raman spectroscopy (SERS) combines molecular fingerprint specificity with potential single-molecule sensitivity. Therefore, the SERS technique is an attractive tool for sensing molecules in trace amounts within the field of chemical and biochemical analytics. Since SERS is an ongoing topic, which can be illustrated by the increased annual number of publications within the last few years, this review reflects the progress and trends in SERS research in approximately the last three years. The main reason why the SERS technique has not been established as a routine analytic technique, despite its high specificity and sensitivity, is due to the low reproducibility of the SERS signal. Thus, this review is dominated by the discussion of the various concepts for generating powerful, reproducible, SERS-active surfaces. Furthermore, the limit of sensitivity in SERS is introduced in the context of single-molecule spectroscopy and the calculation of the 'real' enhancement factor. In order to shed more light onto the underlying molecular processes of SERS, the theoretical description of SERS spectra is also a growing research field and will be summarized here. In addition, the recording of SERS spectra is affected by a number of parameters, such as laser power, integration time, and analyte concentration. To benefit from synergies, SERS is combined with other methods, such as scanning probe microscopy and microfluidics, which illustrates the broad applications of this powerful technique.