Microwave assisted rapid green synthesis of gold nanoparticles using Annona squamosa L peel extract for the efficient catalytic reduction of organic pollutants

Environmental profiling of gold nanoparticles by flavonoids fractionalization from carrica papaya leaf extract for photocatalytic debasement of organic contaminants and it's cyto-toxic analysis

In present investigation, Carica papaya leaf extract has been employed as a bio-reductant agent in order to synthesize ecologically sustainable bio-coupled gold nanoparticles. The formation of gold nanoparticles was confirmed based on colour change of solution and its surface plasmon resonance peak measured using UV-Vis Spectrophotometer (UV-Vis). The Morphology and size of nanoparticles were determined using transmission electron microscope (SEM/TEM), and its crystalline structure by X-ray diffraction studies. Surface area was determined via BET isotherm analysis. The elemental composition of Au nanoparticles was developed using the technique of energy dispersive spectroscopy (EDS). Furthermore, FTIR analysis delineated the presence of functional groups present in the samples of the synthesized AuNPs. Thus, the efficiency of bio coupled Au nanoparticles in photo catalytically decomposing methylene blue was examined under the influence of visible light., the lethal MB colorant had been reduced to 95 % Within 90 min. And also 60% TOC removal was recorded after 5 min of degradation reaction, which increased to 99% after 90 min. Furthermore, cytotoxic experiments on Michigan Cancer Foundations-7 (MCF-7) cell lines showed that Au nanoparticles are effective anticancer agents with an IC50 of 87.2 g/mL on the top of the present work revealed the eco-safety and affordable production of Au nanoparticles from Carica papaya leaf extract, which displayed photocatalytic debasement of organic pollutants and cyto-toxicity effects was investigated.

Novel Microwave Synthesis of Copper Oxide Nanoparticles and Appraisal of the Antibacterial Application

The exceptional characteristics of bio-synthesized copper oxide nanoparticles (CuO NPs), including high surface-to-volume ratio and high-profit strength, are of tremendous interest. CuO NPs have cytotoxic, catalytic, antibacterial, and antioxidant properties. Fruit peel extract has been recommended as a valuable alternative method due to the advantages of economic prospects, environment-friendliness, improved biocompatibility, and high biological activities, such as antioxidant and antimicrobial activities, as many physical and chemical methods have been applied to synthesize metal oxide NPs. In the presence of apple peel extract and microwave (MW) irradiation, CuO NPs are produced from the precursor CuCl₂. 2H₂O. With the help of TEM analysis, and BET surface area, the average sizes of the obtained NPs are found to be 25-40 nm. For use in antimicrobial applications, CuO NPs are appropriate. Disk diffusion tests were used to study the bactericidal impact in relation to the diameter of the inhibition zone, and an intriguing antibacterial activity was confirmed on both the Gram-positive bacterial pathogen Staphylococcus aureus and Gram-negative bacterial pathogen Escherichia coli. Moreover, CuO NPs did not have any toxic effect on seed germination. Thus, this study provides an environmentally friendly material and provides a variety of advantages for biomedical applications and environmental applications.

Biogenic Synthesis of Carboxymethyl Cashew Gum Modified Gold Nanoparticles and its Sensitive and Selective Calorimetric Detection of Hg2+ Ions and Catalytic Reduction of Methyl Red

In the present study, we have successfully synthesized and characterized carboxy methyl cashew gum modified gold nanoparticles (CMCG-AuNPs) via a microwave-assisted method and used as a calorimetric probe for selective detection of Hg²⁺ ions as well as catalytic reduction of methyl red in an aqueous medium. The effect of different parameters including concentration and irradiation time on the formation of CMCG-AuNPs was also investigated. The presence of strong surface plasmon resonance (SPR) peak in the visible region indicated the formation of AuNPs. The characterization techniques were identified the interaction between the CMCG and AuNPs with estimation of size and morphology. The face centred cubic (FCC) crystal structure was identified by using XRD and supporting with SAED pattern. TEM images of CMCG-AuNPs were exhibited as polydispersed with spherical in shape and the average particle size was 12 ± 3 nm. The synthesized CMCG-AuNPs were utilized to sensing Hg²⁺ ions in an aqueous medium, the presence of Hg²⁺ ions selectively among other metal ions, the CMCG-AuNPs were aggregated by changing the color from wine red to purple blue accompanied by change in the position of SPR peak and intensity. It was observed as a strong linear relationship based on the change in intensity, the limit of detection was determined to be 0.277 nM. The catalytic activity was also examined for the reduction of methyl red (MR) in the presence of CMCG-AuNPs was completed within 12 min and followed pseudo-first order kinetics with a rate constant of 0.261 min^-1. From the obtained results, the synthesized CMCG-AuNPs were useful for detection of heavy metal ions as well as toxic pollutants degradation via a green method, and utilized sensing, environmental, and biomedical application in future.

Gold nanoparticles application to the treatment of brain dysfunctions related to metabolic diseases: evidence from experimental studies

Nanotechnology is an emerging and expanding technology worldwide. The manipulation of materials on a nanometric scale generates new products with unique properties called nanomaterials. Due to its significant expansion, nanotechnology has been applied in several fields of study, including developing materials for biomedical applications, i.e., nanomedicine. The use of nanomaterials, including nanoparticles, in nanomedicine, is promising and has been associated with pharmacokinetics, bioavailability, and therapeutic advantages. In this regard, it is worth mentioning the Gold Nanoparticles (AuNPs). AuNPs' biomedical application is extensively investigated due to their high biocompatibility, simple preparation, catalytic, and redox properties. Experimental studies have pointed out critical therapeutic actions related to AuNPs in different pathophysiological contexts, mainly due to their anti-inflammatory and antioxidant effects. Thus, in this review, we will discuss the main experimental findings related to the therapeutic properties of AuNPs in metabolic, neurodegenerative diseases, and ultimately brain dysfunctions related to metabolic diseases.

One Pot Synthesis of Copper Oxide Nanoparticles for Efficient Antibacterial Activity

The unique semiconductor and optical properties of copper oxides have attracted researchers for decades. However, using fruit waste materials such as peels to synthesize the nanoparticles of copper oxide (CuO NPs) has been rarely described in literature reviews. The main purpose of this part of the research was to report on the CuO NPs with the help of apple peel extract under microwave irradiation. Metal salts and extracts were irradiated at 540 W for 5 min in a microwave in a 1:2 ratio. The crystallinity of the NPs was confirmed by the XRD patterns and the crystallite size of the NPs was found to be 41.6 nm. Elemental mapping of NPs showed homogeneous distributions of Cu and O. The NPs were found to contain Cu and O by EDX and XPS analysis. In a test involving two human pathogenic microbes, NPs showed antibacterial activity and the results revealed that the zone of inhibition grew significantly with respect to the concentration of CuO NPs. In a biofilm, more specifically, NPs at 25.0 µg/mL reduced mean thickness and biomass values of S. aureus and E. coli biofilms by >85.0 and 65.0%, respectively, with respect to untreated controls. In addition, environmentally benign materials offer a number of benefits for pharmaceuticals and other biomedical applications as they are eco-friendly and compatible.

Biogenic Synthesis of Copper-Based Nanomaterials Using Plant Extracts and Their Applications: Current and Future Directions

Plants have been used for multiple purposes over thousands of years in various applications such as traditional Chinese medicine and Ayurveda. More recently, the special properties of phytochemicals within plant extracts have spurred researchers to pursue interdisciplinary studies uniting nanotechnology and biotechnology. Plant-mediated green synthesis of nanomaterials utilises the phytochemicals in plant extracts to produce nanomaterials. Previous publications have demonstrated that diverse types of nanomaterials can be produced from extracts of numerous plant components. This review aims to cover in detail the use of plant extracts to produce copper (Cu)-based nanomaterials, along with their robust applications. The working principles of plant-mediated Cu-based nanomaterials in biomedical and environmental applications are also addressed. In addition, it discusses potential biotechnological solutions and new applications and research directions concerning plant-mediated Cu-based nanomaterials that are yet to be discovered so as to realise the full potential of the plant-mediated green synthesis of nanomaterials in industrial-scale production and wider applications. This review provides readers with comprehensive information, guidance, and future research directions concerning: (1) plant extraction, (2) plant-mediated synthesis of Cu-based nanomaterials, (3) the applications of plant-mediated Cu-based nanomaterials in biomedical and environmental remediation, and (4) future research directions in this area.

Green Synthesis of a Novel Silver Nanoparticle Conjugated with Thelypteris glandulosolanosa (Raqui-Raqui): Preliminary Characterization and Anticancer Activity

In the last decade, the green synthesis of nanoparticles has had a prominent role in scientific research for industrial and biomedical applications. In this current study, silver nitrate (AgNO3) was reduced and stabilized with an aqueous extract of Thelypteris glandulosolanosa (Raqui-raqui), forming silver nanoparticles (AgNPs-RR). UV-vis spectrophotometry, dynamic light scattering (DLS), and scanning transmission electron microscopy (STEM) were utilized to analyze the structures of AgNPs-RR. The results from this analysis showed a characteristic peak at 420 nm and a mean hydrodynamic size equal to 39.16 nm, while the STEM revealed a size distribution of 6.64–51.00 nm with an average diameter of 31.45 nm. Cellular cytotoxicity assays using MCF-7 (ATCC® HTB-22™, mammary gland breast), A549 (ATCC® CCL-185, lung epithelial carcinoma), and L929 (ATCC® CCL-1, subcutaneous connective tissue of Mus musculus) demonstrated over 42.70% of MCF-7, 59.24% of A549, and 8.80% of L929 cells had cell death after 48 h showing that this nanoparticle is more selective to disrupt neoplastic than non-cancerous cells and may be further developed into an effective strategy for breast and lung cancer treatment. These results demonstrate that the nanoparticle surfaces developed are complex, have lower contact angles, and have excellent scratch and wear resistance.

Novel biogenic silver and gold nanoparticles for multifunctional applications: Green synthesis, catalytic and antibacterial activity, and colorimetric detection of Fe(III) ions

In this study, novel biogenic silver (AgNPs) and gold nanoparticles (AuNPs) were developed using a green approach with Ganoderma lucidum (GL) extract. The optimization of synthesis conditions for the best outcomes was conducted. The prepared materials were characterized and their applicability in catalysis, antibacterial and chemical sensing was comprehensively evaluated. The GL-AgNPs crystals were formed in a spherical shape with an average diameter of 50 nm, while GL-AuNPs exhibited multi-shaped structures with sizes ranging from 15 to 40 nm. As a catalyst, the synthesized nanoparticles showed excellent catalytic activity (>98% in 9 min) and reusability (>95% after five recycles) in converting 4-nitrophenol to 4-aminophenol. As an antimicrobial agent, GL-AuNPs were low effective in inhibiting the growth of bacteria, while GL-AgNPs expressed strong antibacterial activity against all the tested strains. The highest growth inhibition activity of GL-AgNPs was observed against B. subtilis (14.58 ± 0.35 mm), followed by B. cereus (13.8 ± 0.52 mm), P. aeruginosa (12.38 ± 0.64 mm), E. coli (11.3 ± 0.72 mm), and S. aureus (10.41 ± 0.31 mm). Besides, GL-AgNPs also demonstrated high selectivity and sensitivity in the colorimetric detection of Fe³⁺ in aqueous solution with a detection limit of 1.85 nM. Due to the suitable thickness of the protective organic layer and the appropriate particle size, GL-AgNPs validated the triple role as a high-performance catalyst, antimicrobial agent, and nanosensor for environmental monitoring and remediation.

Methods of green synthesis of Au NCs with emphasis on their morphology: A mini-review

Greener synthetic methods are becoming more popular as a means of reducing environmental pollution caused by reaction byproducts. Another important advantage of green methods is their low cost and the abundance of raw materials. Herein, we investigate the green Au nanoclusters (NCs) using microorganisms (bacteria and fungi) and plant extraction with various shapes and development routes. Natural products derived from plants, tea, coffee, banana, simple amino acids, enzyme, sugar, and glucose have been used as reductants and as capping agents during synthesis in literature. The synthesis techniques are generally chemical, physical and green methods. Green synthesis of Au NCs using bacteria and fungi can be divided into intracellular and extracellular. In an intracellular manner, bacterial cells are implanted in a culture medium containing salt and heated under suitable growth conditions. However, in an extracellular manner, the Au ions are directed from the outside into the cell. Thus, these methods are considered as a better alternative to chemical and physical synthesis. The research on green synthesis of Au nanoparticles (NPs) and its influence on their size and morphology are summarized in this review.

Rapid in-situ growth of gold nanoparticles on cationic cellulose nanofibrils: Recyclable nanozyme for the colorimetric glucose detection

Novel microwave-assisted green in-situ synthesis of positively charged gold nanoparticles (AuNPs) supported by cationic cellulose nanofibrils (C.CNF) within 30 s and devoid of additional reducing agent is reported. Peroxidase activity of these positive AuNPs was studied and that appeared to be superior over its negative charged counterpart. Further the AuNPs@C.CNF is casted into a film which makes it reusable. Using TMB substrate, simple and sensitive colorimetric detection methods for H₂O₂ and glucose were established. Under optimal conditions, the linear ranges were found to be 0.5-30 μM and 1-60 μM, and the detection limits were 0.30 and 0.67 μM for H₂O₂ and glucose, respectively. The film was potentially reused for the detection of glucose up to five cycles without a decrease in the activity. Further, this technique was employed to quantify glucose in human serum samples, and the obtained results were comparable with those of the standard GOD-POD method.

Shape recoverable, Au nanoparticles loaded nanocellulose foams as a recyclable catalyst for the dynamic and batch discoloration of dyes

An environmental benign in-situ formation and growth of gold nanoparticles (AuNPs) on TEMPO-oxidized cellulose nanofibrils (TOCNF) is reported here. With the active functional groups (aldehyde and carboxyl), TOCNF served as a synchronized reducing and supporting agent for the formation of AuNPs. The entire synthesis process was completed within 30 s under microwave irradiation and regarded as ultra-fast. As obtained AuNPs@TOCNF nanohybrid suspension was freeze-dried to form strong water-activated shape recovery 3D foam. Internal morphology and porosity of the foam were studied by SEM and BET. AuNPs@TOCNF foams exhibited excellent catalytic activity for the discoloration of cationic and anionic dyes in batch and dynamic column processes. The spent foams can be easily recovered and reused up to five cycles with more than 98 % efficiency. During the catalytic processes, no obvious deterioration of the foam structure was observed. Practical applicability of the nanocatalyst was evaluated by treating spiked sea water sample.

Microwave-assisted preparation of a silver nanoparticles/N-doped carbon dots nanocomposite and its application for catalytic reduction of rhodamine B, methyl red and 4-nitrophenol dyes

In the current work, a silver nanoparticles/nitrogen-doped carbon dots (AgNPs/NCDs) nanocomposite was prepared by a microwave-assisted method that does not require additional reducing or stabilizing agents. Multiple analytical techniques were used to characterize the prepared nanocomposite. The nanocomposite exhibited a surface plasmon resonance (SPR) absorption peak at 420 nm, indicating the development of AgNPs with NCDs. Further, HRTEM results confirmed the formation of the nanocomposite with the appearance of lattice fringes of both materials. Additionally, the nanocomposite did not show any precipitation even after two months of storage. The nanocomposite exhibited high catalytic activity towards the reduction of rhodamine B (RhB, 98.83%), methyl red (MR, 97.14%) and 4-nitrophenol (4-NP, 99.95%) at ambient temperature. Besides, the kinetic analysis revealed that the reduction reaction followed pseudo-first-order kinetics and the calculated rate constants (k) for rhodamine B (RhB), methyl red (MR) and 4-nitrophenol (4-NP) were found to be 0.0296 s-1, 0.0233 s-1 and 0.029 s-1, respectively. Moreover, it is a reusable and stable catalyst for reduction reactions up to five cycles without significant loss in catalytic activity. Finally, a plausible mechanism for the reduction of pollutants is also discussed in detail. As a whole, the prepared nanocomposite might display stunning behaviour for wastewater treatment applications.

Rapid synchronous synthesis of Ag nanoparticles and Ag nanoparticles/holocellulose nanofibrils: Hg(II) detection and dye discoloration

A novel microwave-assisted green method that synchronously synthesizes silver nanoparticles (AgNPs) and AgNPs decorated holocellulose nanofibrils (AgNPs/HCNF) within a minute and without using a reducing agent is reported. As obtained nanomaterials were well characterized using various analytical techniques. AgNPs applied as a colorimetric probe for the selective recognition of Hg(II) (linear range 10-200 μg L^-1, detection limit 1.16 μg L^-1). The probe was able to quantify Hg(II) in spiked tap, bore, and lake water samples and paper strips were developed to facilitate the onsite detection. Furthermore, freeze-drying of the AgNPs/HCNF nanocomposite produced aerogel that served as an excellent catalyst for the reduction of Congo red and methylene blue. The aerogel was easily recovered and reused without a decrease in activity or deterioration of its structure for five cycles. These results indicate the great potential of the AgNPs/HCNF aerogel for waste water treatment and catalytic applications.

Green preparation of core-shell Cu@Pd nanoparticles with chitosan for glucose detection

Although core-shell structure is favored by many applications, preparing it with green way is rarely been reported. Herein, a core-shell structured Cu@Pd-CS nanocomposite is greenly fabricated utilizing a natural chitosan and applied to glucose detection. As-obtained Cu@Pd-CS nanoparticles were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD). When applied to glucose detection, the Cu@Pd-CS exhibits good stability, sensitivity and anti-interference. Moreover, it has a good linear relationship in glucose concentrations range of 0.1-1 mM with the sensitivity of 1.53 μA mM^-1 cm^-2 and 1-10 mM with the sensitivity of 23.00 μA mM^-1 cm^-2. This work proves the practicability of building metal-based core-shell structure nanoparticles with green resources and glucose detection application.

Determination of Antimicrobial and Toxic Metal Removal Activities of Plant-Based Synthesized (Capsicum annuum L. Leaves), Ecofriendly, Gold Nanomaterials

Nanoparticles are valuable materials with widespread use. The fact that these materials are obtained by biological resources with an environmentally friendly method contributes to the development of studies in this field. Gold nanoparticles (AuNPs) from waste vegetable sources (green leaves of Capsicum annum L.) are economically and easily synthesized. The obtained particles are characterized by UV-vis spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analysis. The antimicrobial activity of the particles on the pathogenic microorganisms Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 29213, Bacillus subtilis bacteria, and Candida albicans yeast are found to have a significant suppressive effect. The removal activities of eight toxic metals (Pd, Cd, Fe, Ni, Co, Mn, Zn, Pb) in Diyarbakır drinking water and artificially prepared water within different pHs are investigated. Gold nanoparticles synthesized from Capsicum annuum L. leaves are found to be effective in toxic metal removal in water samples.

Ionic Liquid-Modulated Synthesis of Porous Worm-Like Gold with Strong SERS Response and Superior Catalytic Activities

Porous gold with well-defined shape and size have aroused extensive research enthusiasm due to their prominent properties in various applications. However, it is still a great challenge to explore a simple, green, and low-cost route to fabricate porous gold with a “clean” surface. In this work, porous worm-like Au has been easily synthesized in a one-step procedure from aqueous solution at room temperature under the action of ionic liquid tetrapropylammonium glycine ([N₃₃₃₃][Gly]). It is shown that the as-prepared porous worm-like Au has the length from 0.3 to 0.6 μm and the width of approximately 100–150 nm, and it is composed of lots of small nanoparticles about 6–12 nm in diameter. With rhodamine 6G (R6G) as a probe molecule, porous worm-like Au displays remarkable surface enhanced Raman scattering (SERS) sensitivity (detection limit is lower than 10⁻¹³ M), and extremely high reproducibility (average relative standard deviations is less than 2%). At the same time, owing to significantly high specific surface area, various pore sizes and plenty of crystal defects, porous worm-like Au also exhibits excellent catalytic performance in the reduction of nitroaromatics, such as p-nitrophenol and p-nitroaniline, which can be completely converted within only 100 s and 150 s, respectively. It is expected that the as-prepared porous worm-like Au with porous and self-supported structures will also present the encouraging advances in electrocatalysis, sensing, and many others.

Green biosynthesis of gold nanoparticles using Chenopodium formosanum shell extract and analysis of the particles' antibacterial properties

BACKGROUND

Various physical and chemical methods for synthesis of metal nanoparticles have had some drawbacks. Therefore, green synthesis of gold nanoparticles (Au NPs) has became one of the most crucial emerging areas of nanobiotechnology. In the present study, plant-mediated synthesis of Au NPs was performed using Djulis (Chenopodium formosanum) shell extract as a reducing and stabilizing agent.

RESULTS

Reaction parameters were manipulated to optimize the Au NPs using a UV-visible spectrophotometer. Optimized Au NPs with a surface plasmon resonance band at 533 nm were prepared using a 744 µg mL^-1 extract and a solution of pH 2.62 chloroauric acid (HAuCl₄ ·3H₂ O) at 40 °C. High-resolution transmission electron microscopy (HR-TEM) results indicated that most of the resultant Au NPs were spherical in shape and exhibited a mean size of 8 ± 6 nm. Energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED), and X-ray diffraction (XRD) confirmed the elemental gold and crystalline nature of the resultant NPs. FTIR spectrum analysis indicated the critical role of phenolic groups in the reduction of Au³⁺ ions and stabilization of the formed Au NPs. Moreover, the synthesized Au NPs possessed antibacterial activity for Escherichia coli and Staphylococcus aureus.

CONCLUSION

In this study, Au NPs were synthesized with high efficiency and stability using Djulis shell extract, and related antibacterial applications were demonstrated. © 2019 Society of Chemical Industry.

Photochemical Synthesis and Catalytic Applications of Gold Nanoplates Fabricated Using Quercetin Diphosphate Macromolecules

The demand for safer design and synthesis of gold nanoparticles (AuNPs) is on the increase with the ultimate goal of producing clean nanomaterials for biological applications. We hereby present a rapid, greener, and photochemical synthesis of gold nanoplates with sizes ranging from 10 to 200 nm using water-soluble quercetin diphosphate (QDP) macromolecules. The synthesis was achieved in water without the use of surfactants, reducing agents, or polymers. The edge length of the triangular nanoplates ranged from 50 to 1200 nm. Furthermore, the reduction of methylene blue was used to investigate the catalytic activity of AuNPs. The catalytic activity of triangular AuNPs was three times higher than that of the spherical AuNPs based on kinetic rate constants (k). The rate constants were 3.44 × 10^-2 and 1.11 × 10^-2 s^-1 for triangular and spherical AuNPs, respectively. The X-ray diffraction data of gold nanoplates synthesized by this method exhibited that the nanocrystals were mainly dominated by (111) facets which are in agreement to the nanoplates synthesized by using thermal and chemical approaches. The calculated relative diffraction peak intensity of (200), (220), and (311) in comparison with (111) was found to be 0.35, 0.17, and 0.15, respectively, which were lower than the corresponding standard values (JCPDS 04-0784). For example, (200)/(111) = 0.35 compared to 0.52 obtained from the standard (JCPDS 04-0784), indicating that the gold nanoplates are dominated by (111) facets. The calculated lattice from selected area electron diffraction data of the as-synthesized and after 1 year nanoplates was 4.060 and 4.088 Å, respectively. Our calculations were found to be in agreement with 4.078 Å for face-centered cubic gold (JCPDS 04-0784) and literature values of 4.07 Å. The computed QDP-Au complex demonstrated that the reduction process took place in the B ring of QDP. This approach contributes immensely to promoting the ideals of sustainable nanotechnology by eradicating the use of hazardous and toxic organic solvents.

Catalytic and antibacterial properties of gold nanoparticles synthesized by a green approach for bioremediation applications

In this work, we are proposing the green synthesis of gold nanoparticles (AuNPs) using aqueous extracts of A. triphylla and evaluating their antibacterial and catalytic properties. Characterization was performed by UV-Vis and FT-IR spectroscopies, X-ray diffraction, and transmission electron microscopy (TEM). Antibacterial activity of AuNPs was analyzed using E. coli and S. Aureus and catalytic activity was determined by the degradation of methylene blue and congo red. UV-Vis analysis showed an increase in AuNPs concentration by increasing the extract concentration, volume extract, and precursor salt concentration. The crystalline nature of AuNPs was corroborated by X-ray diffraction. TEM analysis showed nanoparticles with spherical morphology (mostly) and size between 40 and 60 nm. These results are novel because they showed a homogeneous morphology and a narrow size distribution which is difficult to obtain in green synthesis processes. Results of antibacterial activity showed inhibition zones of 11.3 mm and 10.6 mm for S. Aureus and E. coli, respectively, indicating the bactericidal capacity of the nanoparticles. The degradation periods for methylene blue and congo red were 5 and 11 min, respectively, which are very short compared with previous reports. These results are of great significance for catalytic applications. Therefore, A. triphylla extracts made possible AuNPs synthesis and the nanoparticles obtained can be used as catalytic and antibacterial materials for water remediation.

An Overview of the Synthesis of Gold Nanoparticles Using Radiation Technologies

At a nano-level, optical properties of gold are unique and gave birth to an emerging platform of nanogold-based systems for diverse applications, because gold nanoparticle properties are tunable as a function of size and shape. Within the available techniques for the synthesis of gold nanoparticles, the radiolytic synthesis allows proper control of the nucleation process without the need for reducing agents, in a single step, combined or not with simultaneous sterilization. This review details and summarizes the use of radiation technologies for the synthesis and preparation of gold nanoparticles concerning fundamental aspects, mechanism, current pathways for synthesis and radiation sources, as well as briefly outlines final applications and some toxicity aspects related to nanogold-based systems.