Crosslink-free collagen from Cichla ocellaris: Structural characterization by FT-IR spectroscopy and densitometric evaluation

Extraction and characterization of valuable compounds from chicken sternal cartilage: Type II collagen and chondroitin sulfate

Type II collagen (Col II) and chondroitin sulfate (CS) are the main macromolecules in the extracellular matrix. This study investigated the characteristics of Col II and CS obtained from chicken sternal cartilage (CSC) via enzymatic hydrolysis for various treatment times. For Col II and CS, the highest efficiency of enzymatic hydrolysis was achieved after 24 and 6 h of treatment, respectively. The average molecular weights were α1 chain-130 kDa, β chain-270 kDa for Col II, and 80.27 kDa for CS. Fourier transform infrared spectroscopy revealed that the Col II samples maintained their triple-helical structure and that the predominant type of CS was chondroitin-4-sulfate. Scanning electron microscopy revealed that the Col II and CS samples possessed fibrillar and clustered structures, respectively. This study suggests that collagen and CS obtained from CSC can be used as promising molecules for application in food and pharmaceutical industries.

Preparation, typical structural characteristics and relieving effects on osteoarthritis of squid cartilage type II collagen peptides

The promoting effects of collagen and its derivatives on bone health have been uncovered. However, the structure and effects of type II collagen peptides from squid cartilage (SCIIP) on osteoarthritis still need to be clarified. In this study, SCIIP was prepared from squid throat cartilage with pretreatment by 0.2 mol/L NaOH at a liquid-solid ratio of 10:1 for 18 h and hydrolyzation using alkaline protease and flavourzyme at 50 °C for 4 h. The structure of SCIIP was characterized as a molecular weight lower than 5 kDa (accounting for 87.7 %), a high glycine level of 35.0 %, typical FTIR and CD features of collagen peptides, and a repetitive sequence of Gly-X-Y. GP(Hyp)GPD and GPAGP(Hyp)GD were separated and identified from SCIIP, and their binding energies with TLR4/MD-2 were - 8.4 and - 8.0 kcal/mol, respectively. SCIIP effectively inhibited NO production in RAW264.7 macrophages and alleviated osteoarthritis in rats through the TLR4/NF-κB pathway. Therefore, SCIIP exhibited the potential for application as an anti-osteoarthritis supplement.

Extraction of collagenolytic proteases from Aspergillus heteromorphus URM 0269 in an aqueous two-phase system for application in collagen hydrolysis

Collagenolytic proteases produced by Aspergillus heteromorphus URM0269 were extracted using a PEG/sulfate aqueous two-phase system (ATPS). A 23 factorial design was performed to analyze the independent variables: PEG molar mass (MPEG), PEG concentration (CPEG), and sulfate concentration (Csulf). The extracted proteases were also evaluated for their optimum pH and stability at different pH levels (4.0 - 11.0) after 20 h of incubation. Collagen was extracted from mutton snapper (Lutjanus analis) skin using acetic acid (0.5 mol L-1). The enzyme was preferentially partitioned to the PEG-rich phase (K > 1), whose highest purification factor and recovery (PF = 6.256 and Y = 404.432%) were obtained under specific conditions: MPEG 8000 g.mol-1, CPEG 30%, Csulf 10%. The ATPS extraction provided an enzymatic activity range of pH 7.0 - 11.0, exhibiting greater stability compared to the crude extract. Approximately 80% of protease activity was maintained after 20 hours of incubation at all analyzed pH levels, except pH 11.0. Collagen extraction from L. analis skin yielded 8.056%, and both crude extract samples and ATPS-derived samples successfully hydrolyzed the extracted collagen, reaching peak hydrolysis after 36 hours of treatment. These findings demonstrate the feasibility of extracting highly purified and active proteases capable of hydrolyzing L. analis collagen.

Yield and centesimal characterization of collagen extracted from the skin of peacock bass Cichla monoculus

Fish processing provides waste of around 50.0% to 70.0% of the animal's initial weight, especially the skin. Thus, this residue contains the by-product that allows biopolymers to be obtained, highlighting collagen, which can be widely used in different areas. The present study aimed to evaluate the yield of collagen extracted from peacock bass Cichla monoculus skin and to characterize them physicochemically. Twenty-five peacock bass with an average weight of 646 ± 175 g were used. The skin samples were removed by manual filleting and weighed, with an average yield of 3.7%. Subsequently, such models were analyzed for chemical composition, showing 61.8% for moisture, 29.3% for crude protein, 1.5% for ash, 6.3% for total lipids, and 1.2% for non-nitrogenous extract (NNE). Acid-soluble collagen (ASC) presented an average yield of 8.2%, presenting in its analysis of centesimal composition 12.5% ​​of moisture, 82.6% of crude protein, 1.1% of ash, 2.6% of total lipids, and 1.2% NNE. The skin and collagen extracted from the tucunaré skin have technological potential for use in the preparation of products, adding value to these by-products from fish processing.

Collagen-Based Hydrogels for the Eye: A Comprehensive Review

Collagen-based hydrogels have emerged as a highly promising platform for diverse applications in ophthalmology, spanning from drug delivery systems to biomedical interventions. This review explores the diverse sources of collagen, which give rise to different types of collagen protein. The critical isolation and purification steps are discussed, emphasizing their pivotal role in preparing collagen for biomedical use. To ensure collagen quality and purity, and the suitability of collagen for targeted applications, a comprehensive characterization and quality control are essential, encompassing assessments of its physical, chemical, and biological properties. Also, various cross-linking collagen methods have been examined for providing insight into this crucial process. This comprehensive review delves into every facet of collagen and explores the wide-ranging applications of collagen-based hydrogels, with a particular emphasis on their use in drug delivery systems and their potential in diverse biomedical interventions. By consolidating current knowledge and advancements in the field, this review aims to provide a detailed overview of the utilization of engineered collagen-based hydrogels in ocular therapeutics.

The Use of Collagen-Based Materials in Bone Tissue Engineering

Synthetic bone substitute materials (BSMs) are becoming the general trend, replacing autologous grafting for bone tissue engineering (BTE) in orthopedic research and clinical practice. As the main component of bone matrix, collagen type I has played a critical role in the construction of ideal synthetic BSMs for decades. Significant strides have been made in the field of collagen research, including the exploration of various collagen types, structures, and sources, the optimization of preparation techniques, modification technologies, and the manufacture of various collagen-based materials. However, the poor mechanical properties, fast degradation, and lack of osteoconductive activity of collagen-based materials caused inefficient bone replacement and limited their translation into clinical reality. In the area of BTE, so far, attempts have focused on the preparation of collagen-based biomimetic BSMs, along with other inorganic materials and bioactive substances. By reviewing the approved products on the market, this manuscript updates the latest applications of collagen-based materials in bone regeneration and highlights the potential for further development in the field of BTE over the next ten years.

Characterization of recombinant humanized collagen type III and its influence on cell behavior and phenotype

Collagen made a tremendous impact in the field of regenerative medicine as a bioactive material. For decades, collagen has been used not only as a scaffolding material but also as an active component in regulating cells' biological behavior and phenotype. However, animal-derived collagen as a major source suffered from problems of immunogenicity, risk of viral infection, and the unclear relationship between bioactive sequence and function. Recombinant humanized collagen (rhCol) provided alternatives for regenerative medicine with more controllable risks. However, the characterization of rhCol and the interaction between rhCol and cells still need further investigation, including cell behavior and phenotype. The current study preliminarily demonstrated that recombinant humanized collagen type III (rhCol III) conformed to the theoretical amino acid sequence and had an advanced structure resembling bovine collagen. Furthermore, rhCol III could facilitate basal biological behaviors of human skin fibroblasts, such as adhesion, proliferation and migration. rhCol III was beneficial for some extracellular matrix-expressing cell phenotypes. The study would shed light on the mechanism research of rhCol and cell interactions and further understanding of effectiveness in tissue regeneration.

Graphical abstract

A novel collagenolytic protease from Mucor subtilissimus UCP 1262: Comparative analysis of production and extraction in submerged and stated-solid fermentation

This work aimed to compare the production of collagenolytic proteases produced by M. subtilissimus UCP1262 in submerged fermentation (SF) and solid-state fermentation (SSF) as well as extracting in aqueous two-phase system (ATPS). Collagenolytic protease production was performed in using MS-2 culture medium (SF) and soybean bran as substrate (SSF). Subsequently, the fermented liquid from both fermentations were used for the extraction of enzyme by ATPS, it was verified the influence of different variables from a factorial design 23. In SSF the highest protease and collagenolytic activities were achieved with 362.66 U/mL and 179.81 U/mL, respectively. When compared with SF (26.33 and 18.70 U/mL) higher values were obtained in the activities. The protease partitioning from SF and SSF in ATPS showed a similar profile showing higher affinity for the polymer rich phase. The highest value for the response variable purification factor (3.49) was obtained in the system using SSF. Thus, SSF shows promise as a bioprocess for extracellular production of collagenolytic proteases, using of soybean bran as substrate had used sustainable raw material, aiming application this possible enzyme in the treatment of burns and postoperative scarring.

Structure of type II collagen from sturgeon cartilage and its effect on adjuvant-induced rheumatoid arthritis in rats

The purpose of this paper was to extract and characterize type II collagen of sturgeon cartilage (SC-CII), and to explore the effects of taking SC-CII orally on rheumatoid arthritis (RA) in rats. SC-CII showed a triple-helix structure (RPN = 0.12), with d1 of 11.82 Å and d2 of 4.08 Å, which was analyzed by FT-IR, CD, XRD, and MS. It was constructed of the repeating tripeptide unit Gly-X-Y, where X and Y are generally Pro or Hyp, proved by amino acid composition and peptide mass fingerprinting. Furthermore, the effects of SC-CII on RA were evaluated. Ankle thickness was significantly decreased in SC-CII groups, with changes in lymphocyte proliferation also observed. Compared with the model control group, there was an evident decrease in TNF-α, IL-1β, COX-2, MCP-1, and TLR-4 mRNA levels, but no remarkable differences in APF, MMP-3, and MyD88 mRNA levels in the SC-CII groups. In addition, TNF-α, IL-1β, RF, Anti-CII Ab were significantly reduced in the SC-CII groups, proved by ELISA. Therefore, SC-CII showed alleviating effects on RA through the TLR4/MyD88-NFκB pathway.

Singlet oxygen mediated the selective removal of oxytetracycline in C/Fe3C/Fe0 system as compared to chloramphenicol

Reactive oxygen species (ROS) production for Fe⁰ is limited because of the formed iron corrosion products. In this study, C/Fe₃C/Fe⁰ composite which produces enhanced ROS has been specifically designed and fabricated to remove typical antibiotics (i.e., oxytetracycline (OTC) and chloramphenicol (CAP)) as a heterogeneous Fenton-like catalyst. The C/Fe₃C/Fe⁰ composite demonstrated excellent performance for both OTC and CAP removal as compared with Fe⁰ and biochar. Furthermore, X-ray photoelectron spectrometry, Fourier transform infrared spectrometry, high performance liquid chromatography-mass spectra and electron spin resonance analyses were conducted to elucidate the adsorption and degradation mechanisms. The adsorption of OTC and CAP was mainly dominated by H bonds and the electron-acceptor-acceptor on the surface of the C/Fe₃C/Fe⁰ composite, respectively. In particular, OH simultaneously induced the degradation of OTC and CAP, while ¹O₂ presented the selective oxidation to OTC. More specifically, the degradation of OTC over C/Fe₃C/Fe⁰ was stronger and faster than that of CAP, leading to 65.84% and 16.84% of removal efficiency for OTC and CAP, respectively. Furthermore, C/Fe₃C/Fe⁰ exhibited superior reusability and stability after regeneration, but regenerated Fe⁰ almost lost its reactivity. Therefore, the efficiency in situ generation of ¹O₂ using C/Fe₃C/Fe⁰ would shed new light on the selective oxidation of aqueous organic compounds.

A faster and more effective chrome tanning process assisted by microwave

In leather manufacturing, microwave usually has the ability to strengthen the combination between collagen and chemicals and make the corresponding procedures faster and more effective. Although some studies clarified that tanning under microwave resulted in leather with better thermal stability, the process and leather properties of the pelt chrome tanning had not been elaborated in detail. Thus, in this study, pickled goat pelt was tanned for 5 h as a penetration procedure and then basified for another 5 h as a fixation procedure under microwave heating (MW) and water bath heating (WB); then, the changes in the pH of the chromium complexes as well as the leather chrome content were measured; finally, thermal behaviors and collagen structure of leather tanned under different methods were measured. The results indicated that microwave promoted chrome tanning agent penetration and exhaustion, consequently, chrome tanning process was faster and more effective. The leather tanned with microwave assistance had better hydrothermal and thermal stability as well as thermal decomposition resistance, indicating microwave leading to excellent tanning effect. Nevertheless, when microwave was applied in the chrome tanning process, the hierarchical structure of the leather and the collagen conformation including triple helix was not affected, and the combination pattern between ligands and chromium was also the same as that of the conventional. In brief, microwave could fasten the chrome tanning process and result in extraordinary tanning effect without damaging the leather structure; therefore, microwave might be a new method for promoting tanning efficiency and effect in future.