Synthesis, spectral analysis, anti-corrosive activity and theoretical study of an aromatic hydrazone derivative

8-Aminoquinoline derived two Schiff base platforms: Synthesis, characterization, DFT insights, corrosion inhibitor, molecular docking, and pH-dependent antibacterial study

The current research divulges the synthesis of two new Schiff base (SB) (L NAPH /L O-VAN ) derived from 8-aminoquinoline (8-AMQ) in the presence of 2-hydroxy naphthaldehyde (NAPH) and ortho-vanillin (O-VAN) in CH3OH solvent. They are structurally characterized by spectroscopic methods (IR/Raman/UV-vis/DRS/NMR) and SEM-EDX. SB compounds have a biologically active avenue of azomethine/imine group (H-C=N) that can donate N e's to Mn + ions, showing coordinating flexibility. The -OH and imine (H-C=N) groups are stable in air, light, and alkalis but undergo acidic environments hydrolysis, separating -NH2 and carbonyl compounds. Moreover, buffer solutions with a pH range of 4-6 release aldehyde. Molecular electrostatic potential (MEP), Frontier molecular orbitals (FMO), Fukui function, and Non-linear optical (NLO) were conducted to elucidate SBs chemical potency, optoelectronic significance, and corrosion inhibitor. Accordingly, the calculated ΔE of FMO for L NAPH and L O-VAN is 3.82 and 4.08 eV, ensuring potent biological function. DFT supported the experimental and theoretical IR spectral correlation to enrich better structural insights. NLO-based polarizability (α) and hyperpolarizability (β) factors successfully explore the potential optoelectronic significance. Molecular docking experiments were simulated against DNA, anti-COVID-19, and E. coli. The potential microbiological activity was screened against the bacterial strains E. coli, Klebsiella, Bacillus, and Pseudomonas sp. based on zone of inhibition and MIC values. These experiments also explored the fact that L NAPH and L O-VAN discourage microbial cell biofilms and corrosion. We extensively covered the as-prepared compounds' pH-dependent bacterial effects.

FT-IR, FT-raman and UV spectra and ab initio HF and DFT study of conformational analysis, molecular structure and properties of ortho- meta- and para-chlorophenylboronic acid isomers

In this study, the FT-IR, FT-Raman, and UV-Vis spectroscopic properties of three monosubstituted phenylboronic acid derivatives: ortho-chlorophenylboronic acid (o-ClPhBA), meta-chlorophenylboronic acid (m-ClPhBA) and para-chlorophenylboronic acid (p-ClPhBA) molecules are investigated both experimentally and theoretically using Density Functional Theory (B3LYP) and Hartree Fock (HF). In order to find the stable possible conformations of the compounds, the conformational analysis was carried out by running potential energy surface (PES) scan by means of rotation of two structural parameters, the dihedral angles indicated as φ2 (C6-B-O1-H1A) and φ3 (C6-B-O2-H2A), varying from -180° to 180° with an increment of 10° using B3LYP/6-31G level of theory. Also, to determinate the most stable conformer for all the molecules, potential energy curve (PEC) the stable possible conformations on PES scan were investigated as a function of φ1 (C1-C6-B-O1) dihedral angle from 0° up to 180° with an increment of 10° using B3LYP/6-311++G(d,p) and HF/6-311++G(d,p) level of theory. For all the studied compounds, two conformational structures (conformer anti-anti, syn-syn) that did not have imaginary frequency values outside the equilibrium state (conformer anti-syn) were detected theoretically at the both methods. Due to their conformational flexibility, the relative stabilities of the anti-syn, anti-anti, and syn-syn conformers of o-ClPhBA, m-ClPhBA, and p-ClPhBA are 0.0, 4.66, and 6.76 kcal/mol, respectively, at the B3LYP/6-311++G(d,p) level of theory. For the HF/6-311++G(d,p) level of theory, the relative stabilities are 0.00, 4.54, and 6.11 kcal/mol for o-ClPhBA; 0.00, 3.98, and 1.51 kcal/mol for m-ClPhBA; and 0.00, 4.10, and 1.44 kcal/mol for p-ClPhBA, respectively. Some of the determined stable conformations of these molecules are different in symmetry groups. It was observed that the increase in the symmetry was effective in the of molecular properties, especially for vibrational frequencies. The structural parameter, dipole moments (μ), vibrational frequencies, polarizability (α), hyperpolarizability (β), the highest occupied molecular orbital (HOMO), and the lowest unoccupied molecular orbital (LUMO) of the stable conformers were calculated by using Ab initio HF/6-311++G(d,p) and DFT/B3LYP/6-311++G(d,p) level of theory. The assignments of fundamental vibrational modes of the studied molecule were performed based on total energy distribution (TED) analysis.

Bishydrazone ligand and its Zn-complex: synthesis, characterization and estimation of scalability inhibition mitigation effectiveness for API 5L X70 carbon steel in 3.5% NaCl solutions

Bishydrazone ligand, 2,2'-thiobis(N'-((E)-thiophen-2-ylmethylene) acetohydrazide), H2TTAH and its Zn- complex were prepared and characterized through elemental analysis and various spectroscopic performances as well as (IR, 1H and 13C NMR, mass and (UV-Vis) measurements. The synthesized complex exhibited the molecular formula [Zn2(H2TTAH)(OH)4(C5H5N)3C2H5OH] (Zn-H2TTAH). To assess their potential as anti-corrosion materials, the synthesized particles were assessed for their effectiveness for API 5L X70 C-steel corrosion in a 3.5% NaCl solution using electrochemical methods such as potentiodynamic polarization (PP) and electrochemical impedance spectroscopy (EIS). Additionally, X-ray photoelectron spectroscopy (XPS) was employed to examine the steel surface treated with the tested inhibitors, confirming the establishment of an adsorbed protecting layer. The results obtained from the PP plots indicated that both H2TTAH and Zn-H2TTAH act as mixed-type inhibitors. At a maximum concentration of 1 × 10-4 M, H2TTAH and Zn-H2TTAH exhibited inhibition efficiencies of 93.4% and 96.1%, respectively. The adsorption of these inhibitors on the steel surface followed the Langmuir adsorption isotherm, and it was determined to be chemisorption. DFT calculations were achieved to regulate the electron donation ability of H2TTAH and Zn-H2TTAH molecules. Additionally, Monte Carlo (MC) simulations were conducted to validate the adsorption configurations on the steel surface and gain insight into the corrosion inhibition mechanism facilitated by these molecules.

The impact of environmentally friendly supramolecular coordination polymers as carbon steel corrosion inhibitors in HCl solution: synthesis and characterization

Two 3D-supramolecular coordination polymers (SCP1 & SCP2) have been synthesized and characterized by physicochemical and spectroscopic methods. In a solution of 1.0 M HCl, SCPs were used to prevent corrosion of carbon steel (CS). The inhibition productivity (%η) rises as the synthetic inhibitor dose rises, and the opposite is true as the temperature rises. The study was carried out using chemical (mass loss, ML) and electrochemical ( potentiodynamic polarization, PDP and electrochemical impedance microscopy, EIS) techniques, which showed %η reached to 93.1% and 92.5% for SCP1 & SCP2, respectively at 21 × 10-6 M, 25 °C. For the polarization results, SCPs behave as mixed-type inhibitors. With increasing doses of SCPs, the charge transfer resistance grew and the double layer's capacitance lowered. The creation of a monolayer on the surface of CS was demonstrated by the finding that the adsorption of SCPs on its surface followed the Henry adsorption isotherm. The parameters of thermodynamics were computed and explained. The physical adsorption of SCPs on the surface of CS is shown by the lowering values of free energy (∆Goads < - 20 kJ mol-1) and increasing the activation energy (E*a) values in presence of SCP1 & SCP2 than in their absence. Atomic force microscope (AFM) and scanning electron microscopy (SEM) demonstrated the development of a protective thin film of SCPs precipitated on the surface of CS. There is a strong matching between results obtained from experimental and theoretical studies. Results from each approach that was used were consistent.

Synthesis, description, and application of novel corrosion inhibitors for CS AISI1095 in 1.0 M HCl based on benzoquinoline derivatives

This study aims to synthesize and evaluate the corrosion inhibition properties of three newly prepared organic compounds based on benzo[h]quinoline hydrazone derivatives. The compounds structure were characterised using FTIR, 1H-NMR, 13C-NMR and Mass spectroscopy. Electrochemical methods, including Potentiodynamic Polarization (PP), Electrochemical Frequency Modulation (EFM), and Electrochemical Impedance Spectroscopy (EIS) were employed to evaluate the compounds as corrosion inhibitors in HCl (1.0 M) for carbon steel (CS). Additionally, surface examination techniques such as scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) were used to investigate the surface morphology and elemental composition of the CS before and after exposure to the synthesized compounds. The electrochemical measurements showed that compound VII achieved corrosion inhibition efficiency. SEM and EDX analysis further confirmed the creation of a passive film on the CS surface. These findings demonstrated the potential of benzo[h]quinoline hydrazone derivatives as effective organic corrosion inhibitors for CS in aggressive solution.

Synthesis, characterization, DFT, antioxidant, antibacterial, pharmacokinetics and inhibition of SARS-CoV-2 main protease of some heterocyclic hydrazones

Three hydrazone derivatives have been synthesized using condensation reaction of 4-hydrazinylbenzoic acid with three aromatic aldehydes namely: thiophene-2-carbaldehyde, thiophene-3-carbaldehyde and 2-furaldehyde in ethanol at 78 °C reflux. The synthesized molecules have been characterized using spectroscopic and physicochemical methods including UV-Vis, IR, ¹H NMR, ¹³C NMR, ¹⁵N NMR and melting point determination. Optimized molecular structures, UV-Vis and IR spectra modeling, the reactivity, the stability and some quantum chemical parameters of the synthesized molecules were modeled utilizing density functional theory (DFT). The obtained theoretical results were found in good agreement with the experimental results. On the other hand, the antioxidant and antibacterial activities of the molecules under study were evaluated to better understand the associated mechanisms of action specifically. Also, predicted ADME-T and pharmacokinetic parameters indicated that these compounds showed good oral bioavailability. Finally, molecular docking has been used to predict the inhibitory activity of the studied hydrazone derivatives on the SARS-CoV-2 main protease (Mpro).

Corrosion mitigation for steel in acid environment using novel p-phenylenediamine and benzidine coumarin derivatives: synthesis, electrochemical, computational and SRB biological resistivity

Three novel p-phenylenediamine and benzidine coumarin derivatives were synthetized, namely: 4,4'-((((1,4-phenylenebis(azaneylylidene))bis(ethan-1-yl-1-ylidene))bis(2-oxo-2H-chromene-3,6-diyl))bis(diazene-2,1-diyl))dibenzenesulfonic acid (PhODB), 4,4'-(((-([1,1'-biphenyl]-4,4'-diylbis(azaneylylidene))bis(ethan-1-yl-1-ylidene))bis(2-oxo-2H-chromene-3,6-diyl))bis(diazene-2,1-diyl))dibenzenesulfonic acid (BODB) and 4,4'-(((-((3,3'-dimethoxy-[1,1'-biphenyl]-4,4'-diyl)bis(azaneylylidene))bis(ethan-1-yl-1-ylidene))bis(2-oxo-2H-chromene-3,6-iyl))bis(diazene-2,1-diyl))dibenzenesulfonic acid (DODB). Their chemical structures were proved by performing Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance and mass spectrometry analysis. The synthesized p-phenylenediamine and benzidine coumarin derivatives were tested as corrosion inhibitors for mild steel (MS) in 1 M HCl solution using weight loss, electrochemical, morphological, and theoretical studies. The compound 3,3'-dimethoxy benzidine coumarin derivative (DODB) was proved to give the highest efficiency with 94.98% obtained from weight loss measurements. These compounds are mixed inhibitors, as seen by the polarization curves. Impedance diagrams showed that when the concentration of these derivatives rose, the double-layer capacitance fell and the charge transfer resistance increased. Calculated thermodynamic parameters were computed and the mechanism of adsorption was also studied for the synthesized p-phenylenediamine and benzidine coumarin derivatives. The ability of the synthesized derivatives to protect the surface against corrosion was investigated by scanning electron microscope (SEM), UV-visible spectroscopy and energy dispersive X-ray spectroscopy (EDX). Theoretical chemical calculations (DFT) and biological resistivity (SRB) were investigated.

Investigation of 4-Hydrazinobenzoic Acid Derivatives for Their Antioxidant Activity: In Vitro Screening and DFT Study

Hydrazinobenzoic acid derivatives with isothiocyanate, benzylidene, and acid anhydride core units (1-13) were previously synthesized and fully characterized. Targets 1-13 were investigated for their antioxidant activities using different in vitro assays such as 1,1-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), ferric reducing antioxidant power (FRAP), and reducing power capability. All derivatives showed antioxidant properties in relation to the standard butylated hydroxylanisole (BHA). Superior antioxidant activities was observed for compounds 3 and 5-9 at a concentration of 20 μg/mL (70-72%) when tested by the DPPH method in comparison to BHA (92%), and compounds 1-10 showed the highest free radical quenching activity (80-85%) when examined by ABTS at 20 μg/mL in relation to BHA (85%). Density function theory (DFT) studies were carried out using the B3LYP/6-311G(d,p) level of theory. Several antioxidant descriptors were calculated for targets 1-13 compared with BHA. Targets 1-13 were proposed to exhibit their antioxidant activities via the following three proposed antioxidant mechanisms: single electron transfer (SET), hydrogen atom transfer (HAT), and sequential proton loss electron transfer (SPLET). The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies and electron levels for 1-13 were also determined.

Impediment of Iron Corrosion by N,N′-Bis[2-hydroxynaphthylidene]amino]oxamide in 3.5% NaCl Solution

Hydrazone [N,N′-bis[2-hydroxynaphthylidene]amino]oxamide] derived from the condensation of ethanedihydrazide with 2-hydroxynaphthalene-1-carbaldehyde was synthesized and assessed on the basis of elemental analysis (CHN) and spectral (IR, mass, 13C/1H NMR and UV-Vis) measurements. The influence of N,N-bis([2-hydroxynaphthylidene]amino)oxamide (HAO) in terms of the inhibition of iron corrosion in concentrated sodium chloride solution (3.5 wt.% NaCl) after various exposure periods was assessed. Numerous electrochemical and spectroscopic assessment techniques were performed. Cyclic potentiodynamic polarization experiments indicated that the presence of HAO and its increased concentration decreased the corrosion of iron in NaCl solution by decreasing the corrosion values, anodic and cathodic currents, and corrosion rate. The electrochemical impedance spectroscopy results showed that HAO molecules greatly increased the corrosion resistance. The chronoamperometric experiments performed at −475 mV (Ag/AgCl) revealed that the HAO molecules decreased the absolute currents and reduced the probability of the occurrence of pitting corrosion. The effect of HAO on the inhibition of iron corrosion was also confirmed through scanning electron microscopy micrographs and energy-dispersive X-ray profile analyses, which proved that the surface of the iron sample exposed to chloride solution alone was pitted, while the presence of HAO molecules reduced the severity of the pitting corrosion. The results confirmed that the presence of HAO molecules inhibits the corrosion of iron and this impact increased when the exposure time was increased to 48 h.

New α-Hydrazinophosphonic acid: Synthesis, characterization, DFT study and in silico prediction of its potential inhibition of SARS-CoV-2 main protease

A new α-Hydrazinophosphonic acid (HDZPA) has been synthesized and its molecular structure was determined using spectroscopic methods. The Density Functional Theory (DFT) at the B3LYP/6-31 G (d,p) level was utilized to determine the electronic properties, vibrational modes and active sites of the examined molecule. In this context, some quantum chemical parameters have been calculated in order to discuss the reactivity of the studied molecule. Also, the inhibition activity of the investigated α-Hydrazinophosphonic acid for SARS-CoV-2 main protease (Mpro) and RNA dependent RNA polymerase (RdRp) has been predicted using in silico docking.

Spectroscopic investigations, concentration dependent SERS, and molecular docking studies of a benzoic acid derivative

Spectroscopic analysis, density functional theory (DFT) studies and surface enhanced Raman scattering of 4-((3-bromo-5-chloro-2-hydroxybenzylidene)amino)benzoic acid (BCHB) have been studied on different silver colloids concentrations in order to know the particular chemical species responsible for the spectra. For Raman and surface enhanced Raman scattering (SERS) wavenumbers, changes are observed. Observed variations in the modes of ring may be due to interaction of the π-electrons and presence of this indicated that RingII is more inclined than RingI and the BCHB assumes inclined orientation for concentration 10^-3 M. Changes in orientation are seen in SERS spectra depending on concentration. In order to determine the electron-rich and poor sites of BCHB, the molecular electrostatic potential was also constructed. The molecular docking studies show that the bindings and interactions with the receptors may be supporting evidence for further studies in design further BCHB pharmaceutical applications.

Spectroscopic investigations, concentration dependent SERS, and molecular docking studies of a hydroxybenzylidene derivative

Spectroscopic analysis, density functional theory (DFT) studies and surface enhanced Raman scattering (SERS) of (E)-N'-(5-chloro-2-hydroxybenzylidene)-4-trifluoromethyl) benzohydrazide (CHTB) have been studied on different silver colloids in order to know the particular chemical species responsible for the spectra. Very significant shifts are observed for Raman and SERS wavenumbers. Observed changes in the υ-ring modes may be due to surface interaction of the π-electrons and the presence of this suggested that RingII is more tilted in both cases than RingI and the molecule assumes a tilted orientation for the concentration 10^-3 M. Orientation changes are seen in concentration dependent SERS spectra. The molecular electrostatic potential has also been constructed to determine the electron rich and poor site of CHTB. The molecular docking studies indicate that the binding affinity and hydrogen bond interactions with the receptors may be supporting evidence for further studies in designing other pharmaceutical applications of CHTB.Communicated by Ramaswamy H. Sarma.

Thiocarbohydrazones Based on Adamantane and Ferrocene as Efficient Corrosion Inhibitors for Hydrochloric Acid Pickling of C-Steel

N′-(adamantan-2-ylidene)hydrazinecarbothiohydrazide and 2-(ferrocenyl-1-ylidene) hydrazinecarbothiohydrazide are used in coordination and organometallic complexes. The important idea of the research in this paper is the principal to prepare thiocarbohydrazones from the reaction of 2-acetylferrocene (Fe-Th) or 2-adamantanone (Ad-Th) with carbonothioic dihydrazide. The materials were elucidated by elemental analysis and spectral data. The as-prepared compounds were applied as effective corrosion inhibitors for HCl pickling of C-steel. Detailed investigations on electrochemical (open circuit potential (OCP) vs. time, potentiodynamic polarization (PDP), and impedance spectroscopy (EIS)) techniques and surface morphology studies are introduced in this work. Results indicated that Fe-Th could deliver greater inhibition performance than Ad-Th, and the highest protection capacity values of 93.6% (Ad-Th) and 97.9% (Fe-Th) were accomplished at 200 ppm. The adsorption of Ad-Th or Fe-Th additives followed the Langmuir isotherm with both the chemical and the physical adsorption with chemisorption predominance. EIS measurements supported a betterment in the capacitive behavior with the corrosion inhibitors. The inhibitors exhibited a mixed-type behavior as observed from the PDP studies. Field emission scanning electron microscopy (FESEM) and Fourier-transform infrared spectroscopy (FTIR) studies emphasize the occurrence of a protective layer of the as-synthesized organic inhibitors on the C-steel interface. Theoretical studies (density functional theory (DFT) calculations and Monte Carlo (MC) simulations) provide appropriate support for the experimental findings. The existing report provides very significant consequences in formulating and designing novel thiocarbohydrazone inhibitors with high protection efficacy.

1H-Benzimidazole-5-carboxamidine derivatives: design, synthesis, molecular docking, DFT and antimicrobial studies

15 new 1H-benzimidazole-5-carboxamidine derivatives were synthesized, their antimicrobial effects were evaluated, and molecular docking and DFT studies were performed.

In silico design of hydrazone antioxidants and analysis of their free radical-scavenging mechanism by thermodynamic studies

Background

Antioxidants are very crucial in maintaining the normal function of body cells, as they scavenge excess free radical in the body. A set of hydrazone antioxidants was designed by in silico screening. The density functional theory (DFT) method was employed to explore the reaction energetics of their free radical-scavenging mechanism. With the aid of the developed quantitative structure-activity relationship (QSAR) model for hydrazone antioxidants, the structure and antioxidant activity of these compounds were predicted. Three potential reaction mechanisms were investigated, namely, hydrogen atom transfer (HAT), single-electron transfer followed by proton transfer (SET-PT) and sequential proton loss electron transfer (SPLET). Bond dissociation enthalpy (BDE), adiabatic ionization potential (AIP), proton dissociation enthalpy (PDE), proton affinity (PA), electron transfer enthalpy (ETE) and Gibbs free energy that characterize the various steps in these mechanisms were calculated in the gas phase.

Results

A total of 25 hydrazone antioxidants were designed, in which the molecule MHD 017 gave the best antioxidant activity. Among the tested molecules, MHD 017 at the 10-OH site gave the best results for the various thermodynamic parameters calculated. The reaction Gibbs free energy results also indicate that this is the most favoured site for free radical scavenge.

Conclusion

The obtained results show that HAT and SPLET mechanisms are the thermodynamically plausible reaction pathways of free radical scavenge by hydrazone antioxidants. The reactivity of these compounds towards the hydroperoxyl radical (HOO·) was greater than that towards the methyl peroxyl radical (CH3OO·) based on the exergonicity of the calculated reaction Gibbs free energy.

Graphical abstract