Selective and sensitive detection of Fe3+ ions using quinoline-based fluorescent chemosensor: Experimental and DFT study

A Review on Pyrazolines as Colorimetric Fluorescent Chemosensors for Cu2

The Pyrazoline derivatives display promising potential as sensitive and selective chemosensors for detecting Cu2+ ions. It has undergone screening for its sensing behavior with various metals using absorption, emission spectroscopic techniques. Their unique structure incorporates both donating and accepting sites, characterized by delocalized orbitals. These derivatives exhibit notable chromogenic and fluorogenic capabilities facilitated by intramolecular charge transfer. The sensors based on pyrazoline demonstrate exceptional selectivity, low detection limits, and precise detection of metal ions, particularly Cu2+. This review offers a comprehensive summary of recent discoveries concerning as pyrazoline-based "On-Off" chemosensors. The discussion places emphasis on exploring the design and photophysical properties of these chemosensors, with the primary objective of detecting Cu2+ metal ions. The unique features of pyrazoline derivatives make them promising candidates for practical applications in environmental and biological monitoring, showcasing their potential significance in advancing sensing technologies.

Novel Bis-pyrazoline Fluorescent Probe for Cu2+ and Fe3+ Detection and Application in Cell Imaging

A fluorescent probe Y((1,1'-([1,1'-biphenyl]-4,4'-diylbis(3-(2-hydroxyphenyl)-4,5-dihydro-1H-pyrazole-5,1-diyl)) bis(ethan-1-one))) was designed and synthesized, which could be used to Cu2+ and Fe3+ sensors. Through the study of optical properties, the probe Y shows good selectivity and sensitivity to Cu2+ and Fe3+ in aqueous tetrahydrofuran solution [10.0 mM HEPES, pH 7.4, THF-H2O = 9:1(v/v)] with has excellent anti-interference performance, and its detection limits were 0.931 uΜ for Cu2+ and 0.401uΜ for Fe3+. The coordination mechanism of probe Y with Cu2+ and Fe3+ was speculated and verified at DFT level and HRNM. By Hela cytotoxicity and imaging tests, probe Y not only has good biocompatibility, but also can be used for sensing Cu2+ in cells.

Theoretical and experimental studies on mechanochromic triphenylamine based fluorescent "ON-OFF-ON" sensor for sequential detection of Fe3+ and deferasirox

A novel triphenylamine (TPA) based sensor TTU was rationally designed and synthesized that exhibited reversible mechanochromic and aggregation induced emission enhancement (AIEE) properties. The AIEE active sensor was employed for fluorometric detection of Fe³⁺ in aqueous medium, with distinguished selectivity. The sensor showed a highly selective quenching response towards Fe³⁺ that is ascribed to complex formation with paramagnetic Fe³⁺. Subsequently, TTU-Fe³⁺ complex acted as a fluorescence sensor for the detection of deferasirox (DFX). The subsequent addition of DFX to TTU-Fe³⁺ complex led to the recovery of fluorescence emission intensity of sensor TTU that was attributed to the displacement of Fe³⁺ by DFX and release of sensor TTU. The proposed sensing mechanisms for Fe³⁺ and DFX was confirmed through ¹H NMR titration experiment and DFT calculations. Frontier molecular orbitals (FMO), density of states (DOS), natural bond orbital (NBO), non-covalent interaction (NCI) and electron density difference (EDD) analysis were performed using DFT calculations to support the experimental results. Moreover, sensor TTU displayed colorimetric detection of Fe³⁺. Further, the sensor was employed for the detection of Fe³⁺ and DFX in real water samples. Finally, logic gate was fabricated by using sequential detection strategy.

Aggregation-Induced Emission of Quinoline Based Fluorescent and Colorimetric Sensors for Rapid Detection of Fe3+ and 4-Nitrophenol in Aqueous Medium

New quinoline based fluorescent sensors 4 and 5 were rationally synthesized that exhibited excellent aggregation induced emission (AIE) in an aqueous medium. High fluorescence emission of sensors was accompanied by a noticeable redshift in their absorption and emission spectra that corresponds to the formation of J-aggregates. An AIE feature of sensors 4 and 5 was used for selective detection of Fe³⁺ and 4-NP in an aqueous medium that is attributed to the involvement of intermolecular charge transfer (ICT). The interaction mechanism of sensors with Fe³⁺ and 4-NP was investigated through ¹H NMR titration, Jobs plots, dynamic light scattering (DLS), and DFT analysis. The fluorescence quenching response of sensors 4 and 5 displayed distinguished linear behavior with the concentrations of Fe³⁺ and limits of detection (LOD) were calculated to be 15 and 10 nM, respectively. Further, LOD of sensors 4 and 5 for 4-NP (7.3 and 4.1 nM, respectively) was very low compared to previously reported sensors. Moreover, sensors' coated test strips were fabricated for solid-supported detection of Fe³⁺ and 4-NP. Sensors were successfully applied for the detection and quantification of Fe³⁺ and 4-NP in real water samples. Additionally, sensors were used for the determination of trace amounts of Fe³⁺ in the human serum sample.

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI-MS and Job's method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485 × 10³ M^-1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097 × 10^-9 s and 0.9202 × 10^-9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

A novel quinoline derivative as a highly selective and sensitive fluorescent sensor for Fe3+ detection

In this research, a novel selective and sensitive fluorescent sensor for detecting Fe³⁺ was designed and synthesized; it revealed an obvious fluorescence quenching effect upon addition of Fe³⁺, and possessed the quantitative analysis ability on account of the formation of a 1 : 1 metal–ligand complex. Furthermore, the density functional theory calculations were utilized to study the molecular orbitals as well as the spatial structure. Simultaneously, the cell experiments and zebra fish experiments verified the application value of the sensor in the biological field.

A novel selective and sensitive fluorescent sensor for detecting Fe³⁺ was designed and synthesized; it revealed obvious fluorescence quenching effect upon addition of Fe³⁺, and possessed the quantitative analysis ability on account of the formation of a 1 : 1 metal–ligand complex.

Fluorescent cellulose nanocrystals based on AIE luminogen for rapid detection of Fe3+ in aqueous solutions

Previously, we found that aggregation-induced emission (AIE) luminogen tetraphenylethylene (TPE) based fluorescent cellulose nanocrystals (TPE-CNCs) showed excellent AIE-active fluorescence properties and high selectivity and sensitivity for detecting nitrophenol explosives in aqueous solutions. Here, we further develop the application of TPE-CNCs for fluorescence detection of Fe³⁺ in aqueous solutions. The fluorescence of TPE-CNC aqueous suspensions is rapidly quenched (response time less than 10 s) due to the electron-transfer process between TPE and Fe³⁺ upon addition of Fe³⁺. TPE-CNCs have high sensitivity and selectivity toward Fe³⁺ over a broad pH range from 4 to 10. The limit of detection is determined to be 264 nM, which is below the World Health Organization (WHO) recommendations (5.36 μM) for Fe³⁺. Given the superior properties of TPE-CNCs, it has huge potential to be applied as a rapid and visual evaluation tool for drinking water quality. Collectively, we explore and develop fluorescent cellulose nanocrystals for multi-functional applications and TPE-CNCs can be used for practical applications in sensing, sewage treatment and bioimaging.

AIE-active fluorescent cellulose nanocrystals (TPE-CNCs) is developed as a high selectivity and sensitivity fluorescent probe for rapid detection of Fe³⁺ in aqueous solutions.

A novel [1,2,4]triazolo[1,5-a]pyrimidine derivative as a fluorescence probe for specific detection of Fe3+ ions and application in cell imaging

The detection of metal ions is of particular importance for monitoring environmental pollution and life metabolic activities. However, it is still a challenge to achieve Fe³⁺ detection with specific sensitivity and rapid response, especially in the presence of chelating agents for Fe³⁺ ions. Herein, a novel fluorescence probe for Fe³⁺, i.e., amide derivative of [1,2,4]triazolo[1,5-a] pyrimidine (TP, Id), was synthesized, featuring specific Fe³⁺ selectivity, rapid quenching (5 s), low limit of detection (0.82 μM), good permeability and low cytotoxicity. More importantly, Id can be used to identify and detect Fe³⁺ in the presence of existing strong chelating agents (e.g., EDTA) for Fe³⁺ ions. The results show that the as-synthesized fluorescence probe is particularly suitable as a bioimaging reagent to monitor intracellular Fe³⁺ in living HeLa cells. Furthermore, we proposed the binding mode for Id with Fe³⁺ ions and the light-emitting mechanism through high-resolution mass spectra and density function theory calculations, respectively. An Id-based test paper can be used to rapidly identify Fe³⁺. These results are expected to improve the development of new sensitive and specific fluorescent sensors for Fe³⁺.

A new sensor based on thieno[2,3-b]quinoline for the detection of In3+ , Fe3+ and F- by different fluorescence behaviors

Based on thieno[2,3-b]quinoline-2-carbohydrazide and salicylaldehyde, a novel fluorescent probe (L) was designed and synthesized. L could be used as a multifunctional sensor to sequentially detect In³⁺ and Fe³⁺ through fluorescence enhancement and fluorescence quenching in DMF/H₂ O buffer solutions. At the same time, L had good anti-interference ability, which could still detect In³⁺ and Fe³⁺ well in the presence of other metal ions. For F^- , it could be detected by enhancing the fluorescence change caused by the introduction of Al³⁺ . When other anions were present, the detection of F^- would not be interfered. The detection limits of In³⁺ , Fe³⁺ and F^- were 1.16×10^-10 M, 2.03×10^-8 M and 7.98×10^-9 M, respectively. The complexation model and sensing mechanism between L and In³⁺ , Fe³⁺ and F^- were confirmed by calculating structural optimization and energy optimization using Gaussian 09 software.

Performance of 2-Hydroxy-1-Naphthaldehyde-2-Amino Thiazole as a Highly Selective Turn-on Fluorescent Chemosensor for Al(III) Ions Detection and Biological Applications

The thiazole based Schiff base 2-hydroxy-1-naphthaldehyde-2-amino thiazole (receptor1) was synthesized through a single step process and characterized by spectroscopic and analytical techniques. The cation detecting ability of the receptor1 was explored by fluorescent spectroscopic methods. The receptor1 has recognized Al3+ ions by a turn-on process over a panel of other potentially competing metal ions. The binding constant of receptor1 with Al3+ was found to be 8.27 × 103 M-1. Computational studies Density Functional Theory (DFT) and Time-dependent Density Functional Theory (TD-DFT) were performed to provide detailed information on electronic states and photophysical property of receptor1 and receptor1-Al3+ ions. MTT (3-(4,5-dimethyl thiazole-2-yl)-2,5-diphenyl tetrazolium bromide) assay and bioimaging applications were made on breast carcinoma cells in humans.

Novel luminescent Schiff's base derivative with an azo moiety for ultraselective and sensitive chemosensor of Fe3+ ions

Chemosensors with ultrasensing capabilities for detection of metal ions have received particular attention when using luminescent organic compounds. Even though hundreds of chemosensor agents have been reported for Fe³⁺ ion sensing, the designs of those molecules have been complicated and time consuming, in addition to having limited application for aquatic samples due to their poor hydrophilicity. Here, we synthesized a novel azo-imine derivative (L2) that showed ultrasensitive and selective sensing for Fe³⁺ ions. L2 exhibited ultraselective detection of Fe³⁺ ions with a turn-off of its emission intensity at 341 nm in H₂ O:MeOH (4:1 v/v) aqueous medium. This quenching phenomenon was in good agreement with its colour change from orange-yellowish to colourless. Its capability was shown due to its very low limit of detection and limit of quantification values of 0.31 and 1.04 μM, respectively. The interference study showed that L2 is ultraselective for the detection of Fe³⁺ ions without a significant reduction in its sensing capability even in competitive metal mixtures. Furthermore, direct Fe³⁺ quantification of tap and drinking water showed that L2 gave good recovery percentages. These findings demonstrated that the Schiff's base with an azo fluorophore derivative is a potential chemosensor agent for Fe³⁺ ions sensing applications in aqueous media.

Discovery of a novel camphor-based fluorescent probe for Co2+ in fresh vegetables with high selectivity and sensitivity

Cobalt is an essential micronutrient for human beings. The excessive intake of cobalt may lead to heart-related diseases. In this work, a novel fluorescent probe 1,1'-(((6,11,11-trimethyl-6,7,8,9-tetrahydro-6,9-methanopyridazino[4,5-b]quinoxaline-1,4-diyl)bis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol) (PDS) was synthesized from camphor. The probe PDS could be utilized to selectively recognize Co²⁺ over other metal ions. There is a good linear relationship between fluorescence intensity of PDS and Co²⁺ concentration within 0-20 μM, and its detection limt was found to be 0.925 μM, which is far lower than the national standard for cobalt in drinking water in China. The possible coordination mechanism of PDS with Co²⁺ was determined by nuclear magnetic resonance (NMR), high resolution mass spectrometry (HRMS) and density functional theory (DFT). The probe PDS was also successfully applied in detection of Co²⁺ in tap water and fresh vegetables.

A high-sensitive sensor with HEPES-enhanced electrochemiluminescence of benzo[3]uril for Fe3+ and its application in human serum

An electrochemiluminescence (ECL) sensor based on a benzo[3]uril-modified glassy carbon electrode with sensitized luminescence, with the coexistence of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) as the coreactant, was successfully constructed. The sensitization mechanism was proposed by analyzing the results of the control experiments for establishing the relationship of the luminescence effect with the concentration of HEPES. Under the optimized conditions, the fabricated sensor system was applied for the detection of Fe³⁺ in an aqueous solution with good sensitivity and selectivity. A low detection limit of 0.41 nM was achieved, indicating superior sensor performance over the previous analytical methods. The ECL sensor system was employed for the detection of Fe³⁺ in human serum samples to produce excellent recoveries ranging from 96.17% to 101.81%.

Synthesis and crystal structure of benzyl 5-oxo-5-phenyl-2-(quinolin-2-yl)pentanoate, C27H23NO3

C27H23NO3, monoclinic, P21 (no. 4), a = 5.8236(4) Å, b = 16.7277(13) Å, c = 10.5963(7) Å, β = 96.022(2)°, V = 1026.55(13) Å3, Z = 2, R gt(F) = 0.0396, wR ref(F 2) = 0.0953, T = 153(2) K.