Novel highly selective and sensitive fluorescent sensor for copper detection based on N-acylhydrazone acridone derivative

Colorimetric and Fluorometric N-Acylhydrazone-based Chemosensors for Detection of Single to Multiple Metal Ions: Design Strategies and Analytical Applications

The development of optical sensors for metal ions has gained significant attention due to their broad applications in biology, the environment, and medicine. Colorimetric and fluorometric detection methods are particularly valued for their simplicity, cost-effectiveness, high detection limits, and analytical power. Among various chemical probes, the hydrazone functional group stands out for its extensive study and utility, owing to its ease of synthesis and adaptability. This review provides a comprehensive overview of N-acylhydrazone-based probes, serving as highly effective colorimetric and fluorometric chemosensors for a diverse range of metal ions. Probes are categorized into single-ion, dual-ion, and multi-ion chemosensors, each further classified based on the detected metal(s). Additionally, the review discusses detection modes, detection limits, association constants, and spectroscopic measurements.

Tuning sensing efficacy of anthraimidazoledione-based charge transfer dyes: nitro group positioning impact

Anthraimidazoledione-based optical sensors have been designed by varying the position of the nitro functional group. All three positional isomers showed highly colored, photostable optical signals owing to intramolecular charge transfer interactions. Despite having the same anion-binding site (imidazole unit), the selectivity and sensitivity of the compounds depend on the positioning of the nitro group. The selectivity was fairly good for the meta isomer, followed by the ortho and para isomers, respectively. In contrast, the sensitivity towards anions followed a completely opposite trend, with the para isomer being the most sensitive one towards anions. Interestingly, the color changing response along the turn-on fluorescence signal was observed only with CN- ions in a semi-aqueous environment. Though the introduction of water as a co-solvent could improve the selectivity, the sensitivity was found to be slightly less than that observed in pure organic medium. Mechanistic studies indicated hydrogen bonding interactions between the imidazole -NH proton and cyanide, which further facilitated the extent of intramolecular charge transfer.

Click derived organosilane assembled with nano platform for the detection of Cu2+ ions: Biological evaluation and molecular docking approach

Metal ions have active roles in biochemical, industrial, and environmental processes. The design and development of new rapid sensing materials with advanced reasonable, compelling, and convenient, techniques are urgent. Here in this work, we design and develop sensor with the facile amalgamation of the pyrene-based organosilane (5) through a click silylation approach silicon composite for selective detection of Cu²⁺ ions. Physicochemical and keen methods are employed to perceive the resultant hybrid nanoparticles (H-NPs), and these nanocomposites similarly displayed a strong affection for Cu²⁺ ions. In addition, the identification restrictions while utilizing 5 and H-NP's towards Cu²⁺ found in this study are far lower than the WHO rules for drinking water. Further, organosilane (5) shows good antibacterial and antioxidant activity. The antibacterial effects of triazole-based organosilane (5), are evaluated with a molecular docking study with Escherichia coli (IJZQ) was conducted. The selected ligand was revealed to have a reasonable docking score with a binding energy of -8.40 kcal mol^-1.

A FRET-based ratiometric fluorescent probe for Hg2+ detection in aqueous solution and bioimaging in multiple samples

Mercury ion, as a metal cation with great toxic effect, is widely present in various production and living environments. It seriously threatens human health and environmental safety. It is of great significance to develop convenient and effective methods for mercury ion detection. Here, we designed and synthesized a new ratiometric fluorescent probe (namely APS-NA) for the detection of mercury ions in the environment and multiple biological samples. The probe is constructed by covalently connecting two fluorophores with lipolic acid to achieve fluorescence resonance energy transfer (FRET). In the molecular structure of APS-NA, acridone is used as an energy donor, 1,8-naphthalimide is used as an energy acceptor, and a dithioacetal group is used as the reaction site for Hg²⁺. The intact APS-NA mainly shows the green fluorescence from the acceptor moiety 1,8-naphthalimide; the presence of Hg²⁺ ions would break the dithioacetal linkage between acridone and 1,8-naphthalimide; the defunctionalization of FRET would lead to bright blue fluorescence emission of acridone; thus ratiometric fluorescent detection of Hg²⁺ can be achieved by this recognition process. The probe not only has a large Stokes shift (Δλ = 110 nm), but also has high selectivity, high sensitivity (low detection limit 30 nM) and naked eye visualization. In addition, we have successfully used this probe for the detection Hg²⁺ of actual samples and imaging of a variety of organisms. These results indicate that the probe has broad application prospects.

Novel selective "on-off" fluorescence sensor based on julolidine hydrazone-Al3+ complex for Cu2+ ion: DFT study

A hydrazone (T1) was synthesized by reacting 8-hydroxyjulolidine-9-carboxaldehyde with 2-furoic hydrazide and then modified with Al³⁺ ion to form a novel hydrazone Al³⁺ complex (T1-Al³⁺) in an aqueous solution (8% propylene glycol in 10 mM HEPES pH 5.5). The T1-Al³⁺ complex was studied as a Cu²⁺ selective sensor due to its highly efficient capacibility of paramagnetic quenching. The results showed that the T1-Al³⁺ complexed sensor possesses remarkable sensitivity and selectivity for Cu²⁺ ion in 8% propylene glycol in 10 mM HEPES pH 5.5 as compared with other tested analytes. Notably, this sensor has a broad linear detection range of 10-110 µM for Cu²⁺ ion and a detection limit level of 0.62 µM, which is lower than the Cu²⁺ concentration threshold in drinking water designated by the United States Environmental Protection Agency (EPA). Additionally, it was detectable for the presence of Cu²⁺ ion in mineral water and tap water samples. The selectivity of T1-Al³⁺ complexed sensor with Cu²⁺ ion could be explained by the basis of computation with Gaussian software complied with the basis sets of B3LYP/6-31 G(d,p)/LANL2DZ. Furthermore, only T1 exhibited anticancer efficacy against HeLa and U251 cells with MTT assay.

Spectroscopic properties and fluorescent recognition of dye sensitized layered lutetium-terbium hydroxides

The layered rare earth hydroxides have attracted increasing interests due to their diverse chemical composition and tunable spectroscopic properties. In this paper, a novel Tb³⁺ activated layered lutetium hydroxide (LLuH:Tb) was fabricated, in which the inorganic NO₃^- ions were ion-exchanged with organic (ibuprofen or dodecylsulfonate) anions. After the ion-exchange reaction, the organic anions intercalated LLuH:Tb showed the distinct lamellar structure with the interlayer distance of about 2.56 nm, confirming the formation of inorganic/organic hybrid assembly. The dye ibuprofen-intercalated hybrid effectively promoted the characteristic ⁵D₄ → ⁷F₅ green emission of Tb³⁺ in the host but failed to be exfoliated into nanosheet colloid. On the contrary, the dodecylsulfonate-intercalated hybrid was readily to be exfoliated into nanosheet colloid by dissolving in formamide solvent, but the green emission of Tb³⁺ was too weak to be observed. To take advantage of their respective merits and explore the practical uses, certain amounts of dye ibuprofen were directly added to the dodecylsulfonate-intercalated hybrid colloid. Excited with the ultraviolet light, the characteristic green fluorescence of Tb³⁺ was dramatically enhanced, indicating that the dye was a superior light-harvesting antenna to sensitize the activator Tb³⁺. The dye sensitized hybrid colloid was very stable at ambient temperature and exhibited excellent fluorescent recognition for Cu²⁺ ions over other metal ions in aqueous solution due to the large fluorescence quenching. The detection limit for Cu²⁺ ion reaches 7.63 × 10^-7 mol/L, which is far lower than the limitation of Cu²⁺ in drinking water recommended by the World Health Organization (1.57 × 10^-5 mol/L). The fluorescence enhanced/quenched sensor with excellent stability exhibits a high potential for the detection of Cu²⁺ in routine environmental water.

Irreversible coumarin based fluorescent probe for selective detection of Cu2+ in living cells

Copper ion (Cu²⁺) is an essential part of the living organisms. Cu²⁺ ions play a vital role in many biotic processes. An abnormal amount of Cu²⁺ ions may result in serious diseases. Herein, a novel "fluorescent ON" probe NC-Cu to trace minute levels of Cu²⁺ ions in presence of various biological active species has been developed. Lysosomal cells targeting group (Morpholine) was added to the probe. The spectral properties of probe NC-Cu were recorded in HEPES buffer (0.01 M, pH = 7.4, comprising 50% CH₃CN, λ_ex = 430 nm, slit: 5 nm). The synthesized probe NC-Cu work based on copper promoted catalytic hydrolysis of hydrazone and shows remarkable fluorescence enhancement. The reaction of the probe with Cu²⁺ ions was completed within 20 min. An excellent linear relationship (R² = 0.9952) was found and the limit of detection (LOD, according to the 3σ/slope) for Cu²⁺ ions was calculated to be 5.8 µM. Furthermore, NC-Cu was effectively functional in the living cells (KYSE30 cells) to trace Cu²⁺ ions.

Recent advances (2017-20) inthe detection of copper ion by using fluorescence sensors working through transfer of photo-induced electron (PET), excited-state intramolecular proton (ESIPT) and Förster resonance energy (FRET)

An essential trace element copper plays several physiological roles in living systems. But at excess concentration, it exerts toxicity and becomes associated with numerous disorders. In this article, we have reviewed the recent developments (from 2017 to 2020) in the field of fluorescence-based chemosensors for the detection of Cu²⁺ ion. The sensing probes which were built to work through transfer of photo-induced electron (PET), excited-state intramolecular proton (ESIPT) and Förster resonance energy (FRET) mechanisms have been included in this review. Emphasis is given on the design, sensitivity and response of the probe molecules for the detection of Cu²⁺ ion. Using suitable examples, applications of these three recognition mechanisms for the probing of copper ion have been addressed.

Microwave-Assisted Regioselective Synthesis and 2D-NMR Studies of New 1,2,3-Triazole Compounds Derived from Acridone

A simple and mild protocol towards the synthesis of new 1,2,3-triazole compounds derived from acridone has been developed via regiospecific 1,3-dipolar cycloaddition reaction between 10-(prop-2-yn-1-yl)acridone derivatives and aromatic azides using CuI as a catalyst. The cycloaddition reaction has been performed using conventional as well as microwave-assisted methods. Microwave-assisted synthesis caused a significant reduction in the reaction times and improvement in the yields of all the synthesized compounds compared with the conventional method. The structure of the 1,4-disubstituted 1,2,3-triazoles has been elucidated by IR, HRMS, 1H-NMR, 13C-NMR, and 2D NMR (1H-13C HMBC, 1H-1H COSY, and 1H-1H NOESY) spectroscopies.

Synthesis and biological evaluation of novel isoxazole derivatives from acridone

The present study was carried out in an attempt to synthesize a new class of potential antibacterial agents. In this context, novel isoxazoles were synthesized and evaluated for their potential antibacterial behavior against four pathogenic bacterial strains. The synthesized compounds exhibited moderate-to-good antibacterial activity against these strains. The highest antibacterial activity was observed against the Escherichia coli strains, particularly for compounds 4a and 4e with phenyl and para-nitrophenyl groups on the isoxazole-acridone skeleton; they showed promising minimum inhibitory concentration values of 16.88 and 19.01 μg/ml, respectively, compared with the standard drug chloramphenicol (22.41 µg/ml). The synthesized compounds were subjected to in silico docking studies to understand the mode of their interactions with the DNA topoisomerase complex (PDB ID: 3FV5) of E. coli. The molecular docking results showed that compounds 4a-l occupy the active site of DNA topoisomerase (PDB ID: 3FV5), stabilized via hydrogen bonding and hydrophobic interactions, which may be the reason behind their interesting in vitro antibacterial activity.

Influence of DMβCD on the Interaction of Copper(II) Complex of 6-Hydroxychromone-3-carbaldehyde-3-hydroxybenzoylhydrazine with ctDNA

The interaction mechanism between a scarcely soluble copper(II) complex of Cu(II)-6-hydroxychromone-3-carbaldehyde-(3'-hydroxy)benzoylhydrazone (CuCHz) in aqueous solution and its DMβCD complex was studied in the presence of ctDNA through spectroscopy and thermodynamic methods. The thermodynamic results indicate that the binding process of the CuCHz-DMβCD inclusion complex is a spontaneous process and the inclusion is enthalpy-driven. The binding constants of CuCHz and CuCHz-DMβCD with ctDNA are 2.69 × 10³ and 14.7 × 10³ L mol^-1, respectively. The stoichiometry of the complex is 1:1, and the determined thermodynamic indicates that the process of binding is spontaneous and entropy-driven. A competitive binding titration with ethidium bromide revealed that CuCHz efficiently displaces EB from the EB-DNA system. In addition to the thermal denaturation experiments and docking studies, we can confirm that the mode of binding of this complex to ctDNA is intercalation mode. The presence of DMβCD enhances the aqueous solubility of CuCHz; nevertheless, the cyclodextrin did not affect the interaction of CuCHz with ctDNA because the inclusion complex breaks down when it binds with ctDNA.