Mesoporous iron oxide nano spheres for capturing organic dyes from water sources

Kinetics and process optimization studies for the effective removal of cresyl fast violet dye using reusable nanosized mullite

The swift rise of hazardous dye effluent from diverse sectors continues to be a severe public health problem and a top priority for environmental preservation, presenting a significant obstacle to the current conventional water treatment systems. This study aims to develop an efficient and reusable approach for removing cresyl fast violet dye using mullite nanoparticles. Some factors such as pH, nano-mullite dosage, agitation speed, time, and others that affect the removal process were studied. The mullite nanoparticles' shape, particle size, pore diameters, and crystal phase structure are characterized using many techniques such as Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), transmission electron microscopy (TEM), Contact angle, Zeta potential, scanning electron microscope (SEM) as well as energy dispersive X-ray analysis (EDX). The optimal conditions were pH 7 and 600 rpm for 30 min at room temperature. Using statistical programs such as ANOVA and Design Expert, the dye removal parameters were modeled and optimized, where the removal percentage was about 99%. In addition, the experimental elimination process exceeded 90% after just 10 min. Langmuir, Freundlich, Dubinin-Kaganer-Raduskevich (DKR), and Temkin isotherm equations were examined to find the adsorption isotherm. The experimental data fits the pseudo-second-order model and the Freundlich isotherm. Thermodynamic investigations confirmed that the adsorption process was endothermic and spontaneous. The nano-mullite was employed for the removal process, and its recycling ability supports its economic benefits. It was found that the high percentage of elimination remained consistent for more than 3 cycles.

Synthesis and characterization of magnetic aluminum metal-organic frameworks encapsulated with chitosan and carboxymethyl cellulose for effective elimination of atrazine from aqueous solutions: Adsorption evaluation, DFT calculations and Box-Behnken design optimization

The discharge of herbicides is a primary contributor to water contamination, presenting significant environmental and public health hazards. Encapsulating herbicides in a chemical compound called MAl-MOF/CS-CMC hydrogel bead (MACC) made from magnetic aluminum metal-organic frameworks (MAl-MOF) and crosslinked with chitosan (CS) and carboxymethyl cellulose (CMC) shows promise for potential use. The research successfully developed and examined MACC microspheres, utilizing various analytical techniques including PXRD, FESEM, TEM, FT-IR, and XPS. The efficiency of MACC in eliminating atrazine (ATZ) from wastewater was also simulated. Additionally, density functional theory (DFT) was employed to assess the electrical characteristics, reactivity, and arrangement of ATZ at a structural level. The results of the DFT analysis demonstrate a significant relationship between the locations of nucleophilic and electrophilic attacks and the molecular orbitals of the HOMO and LUMO. Using MACC as an adsorbent provides considerable advantages due to its expansive surface area of 860.92 m2/g and a pore size of 1.48 nm, meeting the mesoporous classification criteria outlined by IUPAC standards. In addition, it possesses a pore volume of 1.22 cm3/g. Nevertheless, following the adsorption procedure, the pore volume reduced to 0.78 cm3/g, and the surface area decreased to 650.42 m2/g. Several factors contributing to the capacity to attract and retain substances were analyzed. These factors encompass temperature, duration of contact, quantity of the attracting substance, initial atrazine (ATZ) concentration, and solution pH. The primary method of adsorption that was determined is chemisorption, as evidenced by the calculated adsorption energy of 29.3 kJ per mole. The thermodynamic analysis indicates that the adsorption of ATZ by the micropores of MACC occurs spontaneously and is characterized as endothermic, as evidenced by the positive ΔHo value and negative ΔGo value. It has been proposed that a range of adsorption mechanisms, including chemisorption, π-π interactions, pore filling, hydrogen bonding, and electrostatic interactions, may be responsible for removing the herbicide from the MACC material.

Valorization of the performance of novel and natural sodium alginate/pectin/Portulaca oleracea L. ternary composites in the adsorption of toxic methylene blue dye from the aquatic environment

This research introduces the development of a novel, sustainable, cost-effective, and eco-friendly sodium alginate (SA)-pectin (P) ternary composite, enhanced with Portulaca oleracea L. (PO) additive, which has been thoroughly investigated for its efficacy in removing hazardous methylene blue (MB) dye from wastewater. The selectivity studies using various cationic and anionic dyes were conducted. The composite microbeads that were generated underwent characterization using FTIR-ATR, SEM, XRD, zeta potential, and pHpzc analysis. Subsequently, the most favorable parameters for adsorption, including initial pH (2-12), contact time (0-180 min), adsorbent dosage (0.01-0.20 g), and temperature (298-318 K), were identified. The effect of monovalent and divalent salt concentrations on adsorption process was evaluated. The adsorption data were utilized in several isotherm (Langmuir, Freundlich, D-R, and Temkin) and kinetic (pseudo-first-order and pseudo-second-order) models. According to the Langmuir isotherm model was calculated the adsorption capacity at 298 K is 709.22 mg/g for SA/P/PO30 composite microbeads. The process of adsorption was seen to conform to a pseudo-second-order kinetic model. The results revealed that the process was both exothermic (∆Ho=-10.42kJ/mol) and spontaneous (∆Go=-26.04kJ/molat298K). Moreover, reusability analyses demonstrated that the composite microbeads that were created may be utilized several times, even after the 5th cycle. The results indicate that the developed composite microbeads have the potential to serve as an effective and inexpensive adsorbent for eliminating cationic contaminants from a wastewater.

Effective levofloxacin adsorption and removal from aqueous solution onto tea waste biochar; synthesis, characterization, adsorption studies, and optimization by Box-Behnken design and its antibacterial activity

ABSTRACTResearch efforts are focusing on investigating cost-effective and ecologically friendly ways to create nanoparticles as a result of promising developments in green technology (NPs). This experiment focused on the effectiveness of using biochar (TWB) made from coffee waste to extract levofloxacin (LEV) from water. The conclusive results of the trials showed that TWB is an effective adsorbent for removing LEV from liquid solutions. The TWB produced through biological processes underwent comprehensive analysis using techniques such as X-ray diffractometry (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller surface area measurement (BET), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The bioengineered TWB's exceptional crystalline properties, which closely resemble the monoclinic structure of bulk TWB, were confirmed by the XRD analysis. Based on the scanning electron microscopy (SEM) data, the synthesis of TWB Nanoparticles resulted in the formation of spherical particles with an approximate diameter of 40 nm, accompanied by a substantial surface area of 285.55 m²/g. The Pseudo-Second-Order model, which best captured Levofloxacin's adsorption characteristics, was evaluated on the TWB, and the results showed that external mass transfer was the main determinant of response rate. It was also found that the adsorption process was endothermic and spontaneous. The system was optimized using the Box-Behnken design (BBD) methodology. The achieved removal capacity of 1119.19 mg/g utilizing the tested adsorbent was determined to be reasonable when compared to the performance of other previously used adsorbents when evaluating the effectiveness of eliminating LEV. The process of LEV adsorption onto TWB involves a number of different mechanisms, such as ion exchange, π-π interactions, electrostatic pore filling, and hydrogen bonding. Following extensive testing in connection with a real-world sample, the adsorbent demonstrated remarkable efficacy, and it maintained good performance even after undergoing three further regeneration cycles. By adjusting the annealing temperature, we controlled the synthesis of TWB nanoparticles across a range of sizes in order to maximize their antibacterial capabilities. This research utilized a pair of Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and a pair of Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli) to evaluate the antibacterial efficacy of TWB.

Enhancing methyl violet 2B pollutant removal from wastewater using Al-MOF encapsulated with poly (itaconic acid) grafted crosslinked chitosan composite sponge: Synthesis, characterization, DFT calculation, adsorption optimization via Box-Behnken Design

In this research, aluminum metal-organic framework encapsulated with poly (itaconic acid) grafted crosslinked chitosan composite sponge (Al-MOF@PIC) was prepared. SEM, FTIR, XPS, XRD, and BET techniques were employed to thoroughly characterize the synthesized material and establish its structure and characteristics. The study discovered that the Al-MOF@PIC is an efficient way to remove dyes, which constitute a significant number of contaminants in industrial wastewater. Subsequently the adsorption of methyl violet 2B (MV-2B) dye, the surface area, pore size, and pore volume of the adsorbent decreased from 1860.68 m2/g, 1.62 nm, and 1.52 cc/g to 1426.45 m2/g, 1.11 nm, and 0.92 cc/g, individually. This modification suggested that a portion of the MV-2B dye had been removed by adsorption over the adsorbent's pores. The excellent adsorption capacity of the material was further confirmed by batch adsorption tests, which displayed a maximum adsorption capability of 646.76 mg/g for the elimination of MV-2B dye. The high adsorption energy of 26.8 kJ/mol designates that chemisorption is primarily responsible for MV-2B dye adsorption against the sponge adsorbent. The Al-MOF@PIC composite sponge demonstrated exceptional reusability over six cycles, demonstrating its strength and durability. The Al-MOF@PIC composite sponge successfully removes MV-2B from water by pore filling, π-π stacking, hydrogen bonding, and electrostatic interactions, which are the key mechanisms behind the adsorption of the dye pollutant. Its potential for practical applications is further demonstrated using Box Behnken-design (BBD) to optimize the adsorption consequences.

Synthesis and characterization of a novel TiO2@chitosan/alginate nanocomposite sponge for highly efficient removal of As(V) ions from aqueous solutions: Adsorption isotherm, kinetics, experiment and adsorption mechanism optimization using Box-Behnken design

This research uses a novel TiO2@CSC.Alg composite sponge was created by encasing TiO2 nanoparticles in the natural polymers alginate and chitosan, resulting in a nanocomposite that is both ecologically friendly and biocompatible. Using the generated nanocomposite as a new environmentally friendly adsorbent, As(V) heavy metal ions were effectively removed from aqueous media. The following techniques were used to analyse the physicochemical properties of the obtained materials: pHZPC, FTIR, XRD, BET, SEM, and XPS. Utilizing nitrogen adsorption/desorption isotherms, the TiO2@CSC.Alg composite sponge's textural properties were identified. This revealed a BET surface area of 168.42 m2/g and a total pore volume of 1.18 cc/g, indicating its porous nature and potential for high adsorption capacity. Examine the effects of temperature, pH, dose, and beginning concentration on adsorption. The adsorption characteristics were determined based on equilibrium and adsorption kinetics measurements. The adsorption process was both pseudo-second-order (PSOE) and Langmuir isothermally fit. Chemisorption was the adsorption method since the adsorption energy was 25.45 kJ·mol-1. An endothermic and spontaneous adsorption process was indicated by more metal being absorbed as the temperature increased. The optimal conditions for adsorption were optimized via Box-Behnken design software to be pH of 5 in the solution, a dosage of 0.02 g of the TiO2@CSC.Alg composite sponge per 25 mL, and an arsenate (As(V)) solution the adsorption capacity was 202.27 mg/g are ideal for efficient adsorption. These parameters are critical in achieving the maximum adsorption capacity of the composite sponge for arsenate, which could be beneficial for water purification applications. Utilizing Design-Expert software's response surface methodology (RSM) and Box-Behnken design (BBD), the adsorption process was optimized with the fewest planned tests. After six successive cycles of adsorption and desorption, the adsorbent stability was confirmed by the adsorbent reusability test without any noticeable decrease in removal efficacy. Additionally, it displayed good efficiency, the same XRD and XPS data before and after reuse, and no change in chemical composition.

Industrial dye absorption and elimination from aqueous solutions through bio-composite construction of an organic framework encased in food-grade algae and alginate: Adsorption isotherm, kinetics, thermodynamics, and optimization by Box-Behnken design

A potential bio-adsorbent material for removing Rhodamine B (RB) from aqueous solution is Ru-MOF@FGA/CA beads. The adsorption capability of the material is probably enhanced by the use of a natural substance made of food-grade algae (FGA) and calcium alginate (CA), which has been cross-linked and loaded with ruthenium metal-organic frameworks (Ru-MOF). The Ru-MOF@FGA/CA beads were analyzed by XPS, PXRD, FT-IR, and SEM. The nitrogen adsorption-desorption isotherm analysis of the Ru-MOF@FGA/CA beads before and after the adsorption of RB revealed that had a surface area of 682 m2/g, a pore size of 2.92 nm, and a pore volume of 1.62 cc/g, that decreased after adsorption as the surface area reduced to 468.62 m2/g, while the pore volume reduced to 0.76 cc/g. indicating that the RB molecules occupied the available space within the pores of the material. The decrease in both surface area and pore volume specifies that the Ru-MOF@FGA/CA beads' pores were able to effectively adsorb the RB molecules. The adsorption of RB against the Ru-MOF@FGA/CA beads is affected by pH, adsorbent dose, starting RB concentration, and salinity. Controlling these factors can enhance the adsorption capability and effectiveness of the beads for RB removal. With an adsorption energy of 22.6 kJ/mol, the adsorption of RB onto the Ru-MOF@FGA/CA beads was determined to be a chemisorption process, demonstrating a strong bond among the adsorbent and the adsorbate. The pseudo-second-order kinetics and Langmuir isotherms were used to suit the adsorption process. Because the adsorption procedure was endothermic, it increased as the temperature increased. By using this information, the adsorption conditions may be improved, and the beads' ability to absorb RB can be increased. Up to six reuses of the Ru-MOF@FGA/CA beads are possible without affecting their chemical makeup and maintaining analogous PXRD and FT-IR data after each reuse. The adsorption process can be optimized through the application of the Box-Behnken design (BBD) approach and may entail H-bonding, electrostatic forces, n-π stacking, and pore filling. The exceptional stability of the beads makes them useful for creating long-lasting and efficient adsorbents that remove contaminants from water.

Enhancing trimethoprim pollutant removal from wastewater using magnetic metal-organic framework encapsulated with poly (itaconic acid)-grafted crosslinked chitosan composite sponge: Optimization through Box-Behnken design and thermodynamics of adsorption parameters

Trimethoprim (TMP), an antibiotic contaminant, can be effectively removed from water by using the innovative magnetic metal-organic framework (MOF) composite sponge Fe3O4@Rh-MOF@PIC, which is shown in this study. The composite is made up of magnetite (Fe3O4) nanoparticles and a rhodium MOF embedded in a poly(itaconic acid) grafted chitosan matrix. The structure and characteristics of the synthesized material were confirmed by thorough characterization employing SEM, FTIR, XPS, XRD, and BET techniques. Notably, the composite shows a high magnetic saturation of 64 emu g-1, which makes magnetic separation easier, according to vibrating sample magnetometry. Moreover, BET analysis revealed that the Fe3O4@Rh-MOF@PIC sponge had an incredibly high surface area of 1236.48 m2/g. Its outstanding efficacy was confirmed by batch adsorption tests, which produced a maximum adsorption capacity of 391.9 mg/g for the elimination of TMP. Due to its high porosity, magnetic characteristics, and superior trimethoprim uptake, this magnetic MOF composite sponge is a promising adsorbent for effective removal of antibiotics from contaminated water sources. An adsorption energy of 24.5 kJ/mol was found by batch investigations on the Fe3O4@Rh-MOF@PIC composite sponge for trimethoprim (TMP) adsorption. The fact that this value was up 8 kJ/mol suggests that the main mechanism controlling TMP absorption onto the sponge adsorbent is chemisorption. Chemisorption requires creating strong chemical interactions between adsorbate and adsorbent surface groups, unlike weaker physisorption. The magnetic composite sponge exhibited strong removal capabilities and high adsorption capacities for the antibiotic pollutant. The Fe3O4@Rh-MOF@PIC composite sponge also showed magnetism, which allowed for easy magnetic separation after adsorption. Over the course of 6 cycles, it showed outstanding reusability, and XRD confirmed that its composition was stable. The high surface area MOF's pore filling, hydrogen bonding, π-π stacking, and electrostatic interactions were the main trimethoprim adsorption mechanisms. This magnetic composite is feasible and effective for removing antibiotics from water because of its separability, reusability, and synergistic adsorption mechanisms via electrostatics, H-bonding, and π-interactions. The adsorption results were optimized using Box Behnken-design (BBD).

Superior adsorption and removal of industrial dye from aqueous solution via magnetic silver metal-organic framework nanocomposite

The indirect emission had a negative influence on the ecosystem of enormous amounts of harmful dyes into water. Fe3O4@Ag-MOF was successfully fabricated to capture Gentine violet (GV)) as a model example of cationic dye from their aqueous solutions was evaluated in this search as a method to eliminate dyes from water contaminants. FTIR, XPS, BET, TGA, SEM, TEM, and XRD have all been used to study this adsorbent in order to determine its structural and chemical characteristics as well as to interpret its binding mechanisms. According to the results of the characterization, the synthesized composite had a size about 45 nm, a surface area of 856.06 m2/g, and considerable magnetic characteristics (66.2 emug-1). Consequently, we created mesoporous surfaces that had a strong ability to interface and absorb GV dye. It is possible to use the pseudo-second order rate equation to characterize the kinetic profile., while the Langmuir equation fits isotherm models. At pH 9, maximum sorption capacities can reach 1.68 mmol.g-1. Additionally, the investigations of temperature profiles indicated the endothermic process and Thermodynamic parameters were discovered as, ΔG°, ΔH° and ΔS° The synthesized adsorbent had an interestingly high reusability of > 92 percent up to the sixth cycle. These findings revealed that a mixture of electrostatic interactions, π-π stacking, hydrogen bonds, and pore filling were involved in the GV adsorption mechanism. Fe3O4@Ag-MOF was successful in demonstrating its effectiveness as a point-of-use colour collection candidate from actual dyeing effluents.

Enhancing brilliant green dye removal via bio composite chitosan and food-grade algae capsulated ruthenium metal-organic framework: Optimization of adsorption parameters by box-behnken design

A natural material made of chitosan (CS) and algae (food-grade algae, FGA) was cross-linked and loaded onto a ruthenium metal organic framework to create a bio-adsorbent (Ru-MOF@CS/FGA composite sponge) with the aim of adsorbing and eliminating Brilliant green (BG) from aqueous solutions. A range of methods were employed to analyze the Ru-MOF@CS/FGA composite sponge, such as X-ray photoelectron spectroscopy (XPS) for elemental analysis, Fourier transform infrared spectroscopy (FTIR) to ascertain the function groups, and scanning electron microscopy (SEM) to establish the surface morphology, and powder X-ray diffraction (PXRD) to study of single and multi-phase polycrystalline materials. Brunauer-Emmett-Teller surface area (BET) confirmed the adsorbent's high surface area and pore volume (826.85 m2/g and 1.28 cm3/g, respectively) and decreased to 475.62 m2/g and 0.74 cm3/g after adsorption. Determine the several factors that affect the adsorption process, such as pH, the adsorbent's dose, the initial BG concentration, and the effect of salinity. The adsorption process was fitted to pseudo-second-order kinetics and Langmuir isotherms. Dubinin-Radushkevich analysis revealed that the adsorption energy was 23.8 kJ/mol, indicating chemisorption as the mode of adsorption. It was discovered through examining the impact of temperature and computing positive-charged enthalpy and entropy that the adsorption process was endothermic, meaning that it increased in response to temperature. It is possible to reuse the Ru-MOF@CS/FGA composite sponge six times with acceptable efficiency, no change in its chemical composition, and comparable FT-IR, XPS, and XRD data before and after each reuse. Examine the mechanisms of adsorbent-adsorbate interaction, which may involve H-bonding, n-π stacking, electrostatic forces, and pore filling. The adsorption results were optimized with the Box Behnken-design (BBD).

Chitosan-nano CuO composite for removal of mercury (II): Box-Behnken design optimization and adsorption mechanism

The study aimed to develop an adsorbent for extracting mercury (II) from water by combining chitosan beads with green copper oxide nanoparticles. This resulted in the synthesis of the CuO NPs@CSC composite sponge, achieved by loading CuO NPs onto citrate-crosslinked chitosan (CSC). Characterization involved X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy. The BET method confirmed a higher surface area of the adsorbent at 285.55 m2/g, suggesting its potential for effective mercury (II) removal from water. This research aligns with broader efforts in environmental science and nanotechnology to create advanced materials for water purification. The characterization techniques ensure the suitability of the synthesized material for its intended application, and the significant surface area enhances its capacity for contaminant adsorption. The study investigated the impact of adsorbent dosage, pH, and initial Hg (II) concentration on mercury (II) adsorption. Results showed a fit with the pseudo-second-order kinetic model and Langmuir adsorption isotherm model. Using the Dubinin-Radushkevich model (adsorption energy: 22.74 kJ mol-1), chemisorption was identified. Notably, the adsorption process was found to be endothermic, indicating that higher temperatures led to increased removal capacity and related parameters. This temperature influence was explored systematically. Additionally, the study concluded that the adsorption reaction was spontaneous, evidenced by a positive entropy change. This analysis contributes valuable insights into the thermodynamics and kinetics of mercury (II) adsorption in the studied system. The CuO NPs@CSC composite sponge achieved an impressive adsorption capacity of 672 mg/g. Even after five consecutive cycles, it maintained strong adsorption capabilities with 84.5 % removal efficiency. Remarkably, over six reuse cycles, there were no observable changes in chemical composition, and XRD peaks remained consistent before and after each cycle. The study delved into the interaction mechanism between the CuO NPs@CSC composite sponge and heavy metals. Utilizing the Box-Behnken design (BBD), the adsorption process was optimized for enhanced efficiency.

Tailoring magnetic Sn-MOFs for efficient amoxicillin antibiotic removal through process optimization

This study investigated the efficacy of magnetic Sn metal-organic frameworks (MSn-MOFs) in removing the insecticide amoxicillin (AMX) from aqueous solutions. Our thorough experimental investigation showed that MSn-MOFs were an incredibly effective adsorbent for removing AMX. Several methods were used to characterize the material. BET investigation of the data displayed a significant surface area of 880 m2 g-1 and a strong magnetic force of 89.26 emu g-1. To identify the point of zero charge, surface characterization was carried out and the value was 7.5. This shows that the adsorbent carries a positive and negative charge below and above this position, respectively. Moreover, the impact of pH on adsorption equilibrium was explored. The results of kinetic models to explore the adsorption of AMX on MSn-MOFs supported the pseudo-second-order, and the adsorption complied well with the Langmuir isotherm. The results revealed that the overall adsorption mechanism may entail chemisorption via an endothermic spontaneous process with MSn-MOFs. The precise modes by which MSn-MOFs and AMX interacted may involve pore filling, H-bonding, π-π interaction, or electrostatic interaction. Determining the nature of this interaction is essential in understanding the adsorption behavior of the MOFs and optimize the adsorbent design for real-world applications. The use of the MSn-MOF adsorbent provides a straightforward yet efficient method for the filtration of water and treatment of industrial effluents. The results showed 2.75 mmol g-1 as the maximum capacity for adsorption at pH = 6. Additional tests were conducted to assess the adsorbent regeneration, and even after more than six cycles, the results demonstrated a high level of efficiency. The adsorption results were enhanced by the application of the Box-Behnken design.

Facile synthesis of new metal-organic framework/chitosan composite sponge for Hg(II) removal: Characterization, adsorption efficiency, and optimization using Box-Behnken design

The objective of this research was to develop a novel adsorbent to eliminate mercury (Hg(II)) from water. A unique citrate-crosslinked La-MOF/citrate crosslinked chitosan composite sponge (La-MOF@CSC composite sponge) was successfully synthesized in an acidic environment using a one-step technique. Modifying the composition of adsorbent materials is a commonly employed strategy to enhance adsorption capacity, particularly for materials composed of metal-organic frameworks. The study investigated the impact of the composite sponge on the adsorption and removal of Hg(II). The composite sponge exhibited a maximum adsorption capacity (qmax) for Hg(II) at 765.22 mg/g and an impressive high surface area of 1208 m2/g. Various factors influencing the adsorption capacity were taken into account in this study. The adsorption isotherm and kinetics were modeled using Langmuir and pseudo-second-order equations, respectively. Consistent with thermodynamics, the adsorption process was identified as spontaneous and endothermic. The quantities of adsorbed substances increased with rising temperature. The La-MOF@CSC composite sponge demonstrated the ability to be reused up to five times with satisfactory efficiency, retaining its chemical composition and exhibiting similar XRD and XPS data before and after each reuse. The interaction between heavy metals and the La-MOF/CSC composite sponge was examined. Optimization of the adsorption outcomes was conducted using the Box-Behnken design (BBD).

Efficiency of Fe3O4@ZIF-8 for the removal of Doxorubicin from aqueous solutions: equilibrium, kinetics and thermodynamic studies

Due to inadequate pharmaceutical wastewater treatment, anticancer contaminants from the pharmaceutical industry frequently end up in the aquatic environment where they endanger aquatic life and humans. As a result, the appropriate treatment of wastewater that contains anticancer agents is crucial for pollution prevention. The purpose of this work is to assess the effectiveness of a Fe3O4@ZIF-8 nanocomposite as an adsorbent to remove of the chemotherapeutic drugs doxorubicin (DOX) from aqueous solution. SEM, XRD, BET, FT-IR, Zeta potential, and point of zero charge analysis were used to study the surface and structural characteristics of the Fe3O4@ZIF-8 nanocomposite. Via the proposed treatment, 804.84 mg/g elimination was successful under the following circumstances: pH = 6; Fe3O4@ZIF-8 dose = 0.02 g/25 mL; DOX concentration = 1.22x10-3 mol; adsorption time = 100 min; and shaking speed = 200 rpm. A investigation of isotherms shown that the Langmuir equation and experimental data suited each other quite well. The adsorption of DOX on Fe3O4@ZIF-8 was endothermic and spontaneous, in accordance with thermodynamic properties. Furthermore, the elimination of DOX was enhanced by the rise in solution temperature. The kinetic analysis revealed that the pseudo-second order was fitted by the model. The suggested adsorption method could recycle Fe3O4@ZIF-8 nanocomposite six times, with a modest reduction in its ability for adsorption. For all XRD reflection peaks, physical characteristics including strain rates were computed and the dislocation of was 4.7 × 10-6. Investigate the activity of the DOX towards COVID-19, breast and prostate cancer using molecular docking.

Efficient Removal of Deltamethrin from Aqueous Solutions Using a Novel Lanthanum Metal-Organic Framework: Adsorption Models and Optimization via Box-Behnken Design

Eliminating pesticides is essential for lowering the dangers to our environment. To do this effectively, it is crucial to find adsorbents with remarkable adsorption capacities, easy retrieval, and separation. Metal-organic frameworks (MOFs) have been extensively recognized for their exceptional ability to absorb pollutants. Therefore, we used novel lanthanum metal-organic frameworks (La-MOFs) to eliminate deltamethrin (DEL) from aqueous solutions. We proved through experimentation that the La-MOF is an efficient adsorbent for DEL from water. A study of the material revealed that the adsorbent had a surface area of 952.96 m2 per gram and a pore volume of 1.038 cm3/g. These outcomes show how this substance can absorb particles. Utilizing kinetic models and conforming to the pseudo-second-order model, a thorough analysis of the efficiency of DEL adsorption onto La-MOF was conducted. To create a perfectly tailored approach, we utilized many parameters. The synthetic La-MOF adsorbent may undergo up to five steps of adsorption-desorption and has exceptional cyclability and reusability. To confirm purifying wastewater samples in the laboratory, the presentation of the established adsorbent was evaluated. For the management of industrial effluent and water filtration, the La-MOF adsorbent offered a simple and effective solution. Our investigation suggests that the method we describe for removing DEL from wastewater samples using the La-MOF adsorbent is unique.

Application of dewatered paper sludge-derived porous solid base catalyst for biodiesel production: Physicochemical properties, reaction kinetics and thermodynamic studies

A new porous solid base catalyst was prepared using dewatered paper sludge and successfully employed to produce biodiesel from soybean oil. The as-prepared catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transforms infrared spectroscopy, X-ray photoelectron spectroscopy, thermal gravity/differential thermal gravity analysis, Brunauer-Emmet-Teller analysis, and CO2-temperature programmed analysis. The results showed that the formation of CaO and uniformly distributed porous structure should account for the high catalytic activity of the as-prepared catalyst. The optimum reaction conditions were observed at 180 ℃, 8 wt.% catalyst/oil weight ratio, 16:1 methanol/oil molar ratio, and 300 min reaction time with 91.6% biodiesel yield. After being used several times and recycled, the regenerated catalyst still exhibited effective catalytic activity without apparent deactivation. The kinetic study confirmed that the experimental data satisfied with Pseudo-first-order kinetic model controlled by reaction temperature and catalyst/oil weight ratio. The reaction activation energy was 24.98 kJ/mol. The change of enthalpy ΔH (14.98 kJ/mol), entropy ΔS (-208.57 J/mol/K), and Gibbs free energy ΔG (109.46 kJ/mol) indicated that the transesterification reaction catalyzed by the dewatered paper sludge-derived catalyst is endothermic, endergonic, and non-spontaneous. Our research finding indicated that the CaO-based catalyst derived from dewatered paper sludge was an economically promising and eco-friendly solid base catalyst for biodiesel production.

Application of Metal-Organic Frameworks for Efficient Removal of Doxorubicin Hydrochloride: Removal Process Optimization and Biological Activity

This study looked at the doxorubicin hydrochloride (DOX) anticancer drug's adsorption characteristics on a silver-based metal-organic framework (Ag-MOF). X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used for the characterization of Ag-MOF. The pore volume and surface area of Ag-MOF were determined through Brunauer-Emmett-Teller (BET) testing at 77 K to be 0.509 cm3/g and 676.059 m2/g, respectively. Adsorption at pH 6 was established to be the best for DOX compared to alkaline solution. Ag-MOF has a good capacity for eliminating DOX (1.85 mmol/g), according to adsorption experiments. From the adsorption results, we can find that Langmuir is the most fitted adsorption isotherm model and the pseudo-second order model best fitted the adsorption kinetics. The energy of activation for adsorption, which was determined to be 15.23 kJ/mol, also supported a chemisorption process. The mechanism of adsorption was evaluated, and details of all possible interactions between DOX and Ag-MOF were illustrated. On the other hand, while examining the impact of temperature, we identified the thermodynamic constraints as ΔG°, ΔH°, and ΔS° and confirmed that the reaction was an endothermic one and spontaneous. Even after numerous reuse cycles, the efficiency remained constant. The synthetic adsorbent was remarkably recyclable at a rate of more than 91.6%. By using the MTT assay, the cytotoxicity of the tested Ag-MOF and DOX@Ag-MOF against human breast cancer cells (MCF-7) was evaluated in vitro. The in vitro antimicrobial activity of Ag-MOF and DOX@Ag-MOF was also tested.

Metal organic framework-derived recyclable magnetic coral Co@Co3O4/C for adsorptive removal of antibiotics from wastewater

The menace posed by antibiotic contamination to humanity has increased due to the absence of efficient antibiotic removal processes in the conventional waste water treatment methods from the hospitals, households, animal husbandry, and pharma industry. Importantly, only a few commercially available adsorbents are magnetic, porous, and have the ability to selectively bind and separate various classes of antibiotics from the slurries. Herein, we report the synthesis of a coral-like Co@Co3O4/C nanohybrid for the remediation of three different classes of antibiotics - quinolone, tetracycline, and sulphonamide. The coral like Co@Co3O4/C materials are synthesized via a facile room temperature wet chemical method followed by annealing in a controlled atmosphere. The materials demonstrate an attractive porous structure with an excellent surface-to-mass ratio of 554.8 m2 g-1 alongside superior magnetic responses. A time-varying adsorption study of aqueous nalidixic acid solution on Co@Co3O4/C nanohybrids indicates that these coral-like Co@Co3O4/C nanohybrids could achieve a high removal efficiency of 99.98% at pH 6 in 120 min. The adsorption kinetics data of Co@Co3O4/C nanohybrids follow a pseudo-second-order reaction kinetics suggesting a chemisorption effect. The adsorbent has also shown its merit in reusability for four adsorption-desorption cycles without showing significant change in the removal efficiency. More in-depth studies validate that the excellent adsorption capability of Co@Co3O4/C adsorbent attributing to the electrostatic and π-π interaction between adsorbent and various antibiotics. Concisely, the adsorbent manifests the potential for the removal of a wide range of antibiotics from the water alongside showing their utility in the hassle-free magnetic separation.

Cassava bagasse as an alternative biosorbent to uptake methylene blue environmental pollutant from water

Herein, the methylene blue (MB) biosorption from the agroindustrial residue (cassava bagasse) is reported. The cassava bagasse residue presented an irregular surface, anionic character, and low specific surface area. The experiments were performed in batch mode. The biosorption behavior was investigated through the experimental variables, initial concentration of MB, pH, and temperature. The maximum biosorption capacity (170.13 mg g^-1) reached 328 K and pH 10.0. The equilibrium and kinetics were better fitted by the Sips and general order (R² ≥ 0.997 and R²_adj ≥ 0.996) models, respectively. Furthermore, the thermodynamic study revealed a spontaneous (ΔG⁰ < 0) and endothermic process. Finally, the results showed cassava bagasse is a potential material for biosorption dyes from the aqueous medium. In addition, the biosorbent has a low aggregate cost and high availability, which contributes to the destination of large amounts of waste and inspires engineering applications.

Role of tailing colloid from vanadium-titanium magnetite in the adsorption and cotransport with vanadium

The geochemical cycling of vanadium (V) in mining areas has attracted much attention. However, little knowledge was about the effects of tailing colloids on the fate and transport of vanadium in tailing reservoirs which was ignored before. This study investigated the interactions of tailing colloids from vanadium-titanium magnetite with vanadium. Colloid characterization, tailing leaching, adsorption, and column experiments of single and cotransport of tailing colloid with V were conducted. Results show that 98.08% V in the vanadium-titanium magnetite tailing was in the residual state with limited leachable V under various conditions. The adsorption of V to the tailing colloid was via electrostatic attraction and surface complexation on the heterogeneously distributed sorption sites on the colloid surface. The adsorption control step was the diffusion of V into the tailing colloid pores. The increase in pH and the decrease in ionic strength (IS) promoted the single transport of tailing colloid and V in quartz sand columns. In cotransport scenarios, V promoted the transport of tailing colloids via the surface coating effect. In contrast, the transport of V was retarded by the adsorbed tailing colloid on the quartz sand surface. The pre-adsorbed V in the column enhanced the subsequent transport of tailing colloids by electrical repulsion, while the pre-adsorbed tailing colloids facilitated the subsequent transport of V via cotransport of the released colloids with V. The high mobility of the tailing colloid and V and their cotransport in the porous media highly demonstrated the potential V pollution pathways that need to be taken into account.

Highly porous organoclay-supported bimetal-organic framework (CoNi-MOF/OC) composite with efficient and selective adsorption of organic dyes

Herein, a highly porous bimetal-organic framework (bi-MOF) based on cobalt and nickel was successfully in situ grown on organoclay (OC) clusters by solvothermal method. Accordingly, the hierarchical porous CoNi-MOF/OC composite with a superior specific surface area of 2046 m²/g and a large pore volume of 0.763 cm³/g was obtained, which facilitated the adsorption of organic dyes. A morphological study using scanning electron microscopy indicated the formation of uniform bi-MOF crystals on the OC plates. Furthermore, the single- and multi-dye adsorption assays were implemented to precisely evaluate the adsorption capacity and selectivity of CoNi-MOF/OC composite to anionic and cationic dyes. The results revealed a high adsorption capacity of 58.61 mg/g at an adsorbent content of 15 mg, initial dye concentration of 20 ppm, and contact time of 25 min for MB, which is superior to several existing clay-based adsorbents. The adsorption kinetics study showed that the adsorption of cationic and anionic dyes onto the CoNi-MOF/OC composite followed the pseudo-second-order kinetic model. Interestingly, the regeneration study showed appropriate reusability and stability of the CoNi-MOF/OC composite for the removal of organic dyes with an almost unchanged structure after four regeneration cycles. The results of this study provide new insights for the rational design and fabrication of next-generation clay-based adsorbent by combining the synergistic advantages of bi-MOF with superior specific surface area and pore volume with organoclay composition and structure.

Efficient adsorption and degradation of dyes from water using magnetic covalent organic frameworks with a pyridinic structure

Covalent organic frameworks (COFs) have promising applications in environmental remediation owing to their precise directional synthesis and superior adsorption ability. However, magnetic COFs with pyridinic N have not been studied as bifunctional materials for the adsorption and catalytic degradation of dyes. Therefore, in this study, a magnetic COF with a pyridinic structure (BiPy-MCOF) was successfully synthesized using a solvothermal method, which exhibited higher methyl orange (MO) removal than other common adsorbents. The best degradation efficiency via the Fenton-like reaction was obtained by pre-adsorbing MO for 3 h at pH 3.1. Both adsorption and catalytic degradation resulted in better removal of MO under acidic conditions. The introduction of pyridinic N improved MO adsorption and degradation on BiPy-MCOF. The electrostatic potential (ESP) showed that pyridinic N had a strong affinity for MO adsorption. Density functional theory calculations confirmed the potential sites on MO molecules that may be attacked by free radicals. Possible degradation pathways were proposed based on the experimental results. Moreover, BiPy-MCOF could effectively degrade MO at least four times, and a high degradation efficiency was obtained in other dyes applications. The coupling of adsorption and degradation demonstrated that the as-prepared BiPy-MCOF was an effective material for organic dyes removal from water.

Photoluminescence Performance and Photocatalytic Activity of Modified Carbon Quantum Dots Derived from Pluronic F127

The photocatalytic degradation of organic dyes in waste water using carbon quantum dots (CQDs) remains a hot topic due to the importance of environmental protection. However, identifying suitable carbon resources and successful surface modification are still challenging. Herein, the hydrothermal method and surface modification of ammonia and thionyl chloride were applied to synthesize CQDs with different surface groups using PEO₁₀₆PPO₇₀PEO₁₀₆ (Pluronic F127) as a carbon source. The average particle size of the as-prepared CQDs was in the range of 2.3-3.5 nm. The unmodified CQDs had the highest relative photoluminescence intensity, while all as-prepared CQDs exhibited abnormal photoluminescence located outside the scope of the visible spectrum. Interestingly, CQDs modified with ammonia achieved a degradation rate of 99.13% (15 d) for 50 mg/L indigo carmine solution, while CQDs modified with thionyl chloride reached a degradation rate of 97.59% (15 d) for light green SF yellowish solution. Therefore, in this work, two typical organic dyes can be effectively photocatalytically degraded by as-prepared CQDs, with suitable surface modification.

Improved photocatalytic dye degradation and seed germination through enzyme-coupled titanium oxide nanopowder - A cost-effective approach

Enzyme-coupled titanium oxide nanopowder samples were prepared usingdifferent volumes of vermiwash using a cost-effective soft chemical method and their photocatalytic efficiency was studied against Methylene Blue (MB) dye decomposition. The volume of vermiwash used in the starting solution was varied from 50 to 200 mL in steps of 50 mL and the effect of enzymes prevalent in the vermiwash on the photocatalytic activity of titanium oxide (TiO₂) was studied. The resultant water obtained after the photocatalytic dye degradation was found to inherit the enzymes from the nanoproduct. This enzyme-activated treated water showed effective seed germination of black gram (Vigna mungo L.). The results suggested that the enzyme-coupled TiO₂ can be used as an effective and eco-friendly material for the treatment of contaminated water and consequently the treated water can also be utilized for enhanced seed germination.

Transport behavior of nanoplastics in activated carbon column

Nanoplastics can be produced directly from some artificial products, such as cosmetics, or indirectly from the breakup of large pieces of plastic waste. They have a small particle size, large specific surface area, and stable structure and can concentrate toxic compounds in water. The discharge of nanoplastics into the water environment through urban piping systems or surface runoff may lead to the contamination of surface water resources, which poses a great threat to the safety of drinking water. As a common adsorbent, granular activated carbon (GAC) is widely used in the advanced treatment of drinking water. However, most of the studies focused on the transport ability of nanoplastics in quartz sand, and there is a lack of research on the migration behavior of nanoplastics in activated carbon media. In this study, the stability and pore characteristics of GAC were studied, and its regeneration efficiency was investigated. The transport curves of PSNPs, which have a particle size of 98 ± 9 nm and specific surface area of about 67 m²/g, were compared under different ionic strengths, ionic species, flow rates, pH, and humic acid (HA) concentrations. And DLVO theory was used to analyze the transport behavior of nanoplastics in activated carbon column. All experiments were performed at room temperature to make the results generalizable. The results showed that GAC had stable pore structure and excellent adsorption capacity. The surface area and pore volume of GAC are 759 m²/g and 0.357 cm³/g, respectively. And the regeneration rate of GAC can reach 90% and 83.3% after the first two regeneration cycles. On the other hand, at high ionic strength and low pH, the repulsive barrier between PSNPs and activated carbon gradually disappeared; then, more PSNPs were deposited in the activated carbon media, and the concentration of PSNPs in the effluent water was lower. Both the flow rate and HA promoted the transport of PSNPs, but the breakthrough curves of PSNPs did not change significantly when the HA concentration was further increased. At the same ion concentration, PSNPs tend to deposit on the surface of activated carbon in the background solution of Ca²⁺ compared with Na⁺. This study reveals the migration mechanism of PSNPs in the activated carbon filter column, which is of great importance to ensure the safety of drinking water and human health.

Effect of Phytosynthesized Selenium and Cerium Oxide Nanoparticles on Wheat (Triticum aestivum L.) against Stripe Rust Disease

In this study, selenium nanoparticles (SeNPs) and cerium oxide nanoparticles (CeONPs) were synthesized by using the extract of Melia azedarach leaves, and Acorus calamusas rhizomes, respectively, and investigated for the biological and sustainable control of yellow, or stripe rust, disease in wheat. The green synthesized NPs were characterized by UV-Visible spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). The SeNPs and CeONPs, with different concentrations (i.e., 10, 20, 30, and 40 mg/L), were exogenously applied to wheat infected with Puccinia striformis. SeNPs and CeONPs, at a concentration of 30 mg/L, were found to be the most suitable concentrations, which reduced the disease severity and enhanced the morphological (plant height, root length, shoot length, leaf length, and ear length), physiological (chlorophyll and membrane stability index), biochemical (proline, phenolics and flavonoids) and antioxidant (SOD and POD) parameters. The antioxidant activity of SeNPs and CeONPs was also measured. For this purpose, different concentrations (50, 100, 150, 200 and 400 ppm) of both SeNPs and CeONPs were used. The concentration of 400 ppm most promoted the DPPH, ABTS and reducing power activity of both SeNPs and CeONPs. This study is considered the first biocompatible approach to evaluate the potential of green synthesized SeNPs and CeONPs to improve the health of yellow, or stripe rust, infected wheat plants and to provide an effective management strategy to inhibit the growth of Puccinia striformis.

Catalytic Neutralization of Water Pollutants Mediated by Dendritic Polymers

Radially polymerized dendritic compounds are nowadays an established polymer category next to their linear, branched, and cross-linked counterparts. Their uncommon tree-like architecture is characterized by adjustable internal cavities and external groups. They are therefore exceptional absorbents and this attainment of high concentrations in their interior renders them ideal reaction media. In this framework, they are applied in many environmentally benign implementations. One of the most important among them is water purification through pollutant decomposition. Simple and composite catalysts and photo-catalysts containing dendritic polymers and applied in water remediation will be discussed jointly with some unconventional solutions and prospects.