Formamidine-based thiuram disulfides: Synthesis, structural characterization, biological studies, and preliminary cheminformatics evaluation

Antidiabetes and antioxidant potential of Schiff bases derived from 2-naphthaldehye and substituted aromatic amines: Synthesis, crystal structure, Hirshfeld surface analysis, computational, and invitro studies

Three Schiff bases were synthesised by the condensation reaction between 2-napthaldehyde and aromatic amines to afford (E)-N-mesityl-1-(naphthalen-2-yl)methanimine (L1), (E)-N-(2,6-dimethylphenyl)-1-(naphthalen-2-yl)methanimine (L2) and (E)-N-(2,6-diisopropylphenyl)-1-(naphthalen-2-yl)methanimine (L3). The synthesised compounds were characterised using UV-visible, NMR (13C & 1H), and Fourier transform infrared spectroscopic methods while their purity was ascertained by elemental analysis. Structural analysis revealed that the naphthalene ring is almost coplanar with the imine functional group as evident by C1-C10-C11-N1 torsion angles of 176.4(2)° and 179.4(1)° in L2 and L3, respectively. Of all the various intermolecular contacts, H⋯H interactions contributed mostly towards the Hirshfeld surfaces of both L2 (58.7 %) and L3 (69.7 %). Quantum chemical descriptors of L1 - L3 were determined using Density Functional Theory (DFT) and the results obtained showed that the energy band gap (ΔE) for L1, L2 and L3 are 3.872, 4.023 and 4.004 eV respectively. The antidiabetic potential of the three compounds were studied using α-amylase and α-glucosidase assay. Compound L1 showed very promising antidiabetic activities with IC50 values of 58.85 μg/mL and 57.60 μg/mL while the reference drug (Acarbose) had 405.84 μg/mL and 35.69 μg/mL for α-amylase and α-glucosidase respectively. In-silico studies showed that L1 docking score as well as binding energies are higher than that of acarbose, which are recognized inhibitors of α-amylase together with α-glucosidase. Further insight from the RMSF, RMSD and RoG analysis predicted that, throughout the simulation L1 showcased evident influence on the structural stability of α-amylase. The antioxidant potential of the compounds was carried out using nitric oxide (NO), ferric reducing ability power (FRAP) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) assays. The compounds exhibited good to fairly antioxidant properties with L1 as well as L3 having IC50 values of 70.91 and 91.21 μg/mL respectively for NO scavenging activities assay, which comparatively outshined acarbose (reference drug) with IC50 value of 109.95 μg/mL. Pharmacology and pharmacokinetics approximations of L1 - L3 showed minimal violation of Lipinski's Ro5 and this projects them to be less toxic and orally bioavailable as potential templates for the design of therapeutics with antioxidant and antidiabetic activities.

Ligand-Guided Investigation of a Series of Formamidine-Based Thiuram Disulfides as Potential Dual-Inhibitors of COX-1and COX-2

A series of thiuram disulfides 1-6 which had been previously synthesized and characterized,^[1] were studied for their potential therapeutic properties. Target-fishing analyses through HitPick and SwissTarget prediction identified COX1 and COX2, which are essential biomolecules in cancer-related inflammations, as the possible targets for compounds 1 and 4 among all the compounds tested. These two proteins have enjoyed interest as targets for treating some neoplastic cancer types such as breast, colorectal, skin, pancreatic, haematological and head cancers. The inhibitory potency of 1 and 4 as lead anticancer drug candidates with dual-target ability against COX1 and COX2 was examined through molecular docking, molecular dynamics simulation and post-MD analyses such as binding energy calculation, RMSD, RMSF, and RoG. The two compounds had better docking scores and binding energies than the known inhibitors of COX1 and COX2. Insights from the RMSD, RMSF, and RoG suggested that both 1 and 4 showed observable influence on the structural stability of these targets throughout the simulation. The reported observations of the effects of 1 and 4 on the structures of COX1 and COX2 indicate their probable inhibitory properties against these target proteins and their potential as lead anticancer drug candidates.

Cross-linked dithiocarbamate-modified cellulose with enhanced thermal stability and dispersibility as a sorbent for arsenite removal

Numerous reports have described dithiocarbamate (DTC)-modified cellulose sorbents that can selectively separate metal ions from water. We have previously synthesized a novel sorbent modified with DTC containing N-heterocycles in the backbone for the selective removal of hazardous metal ions. The sorbent was found to partially dissolve and aggregate in solution, reducing its sorption capacity. In this study, to prepare the sorbent for use as a soli-phase extraction material for the removal of arsenite (As^III) ions, we attempted to decrease the solubility of the sorbent. The sorbent was cross-linked with epoxy or complexed with iron, and the quantities of the modifiers were varied between 3.0 and 10 mol%. As a result, the iron-complexed sorbents were still partially soluble, and cross-linkage with 6.0 mol% of epoxy made the sorbent almost insoluble and dispersed in solution. This sorbent also exhibited the highest As^III sorption performance among the sorbents synthesized in this study. Although DTC-modified polymers are reported to lose their sorption capability after storage at 40 °C, the sorbent was found to be thermally stable. The optimum contact time and pH for As^III removal were 20 min and 3.0, respectively. The maximum sorption capacity of the epoxy-cross-linked sorbent, calculated from the Langmuir isotherm equation, was 600 μmol g^-1 (45 mg g^-1) at 25 °C. Additionally, the sorbent was highly selective toward As^III compared with previously reported sorbents and capable of removing approximately 97% of As^III from environmental water. In conclusion, cross-linking enhances the stability of the sorbents in solutions, which facilitates the removal of As^III from environmental water.

Formamidine-Based Thiuram Disulfides as Efficient Inhibitors of Acid Corrosion of Mild Steel: Electrochemical, Surface, and Density Functional Theory/Monte Carlo Simulation Studies

Electrochemical, surface, and density functional theory (DFT)/Monte Carlo (MC) simulation studies were used in investigating the characteristics of N,N'-(disulfanne-1,2-dicarbonothioyl)bis(N,N'-bis(2,6-dimethylphenyl)formimidamide) (DS1), N,N'-(disulfanne-1,2-dicarbonothioyl)bis(N,N'-bis(2,6-diisopropylphenyl)formimidamide) (DS2), N,N'-(disulfanne-1,2-dicarbonothioyl)bis(N,N'-dimesitylformimidamide) (DS3), and N,N'-(disulfanne-1,2-dicarbonothioyl)bis(N,N'-bis(2,6-dichlorophenyl)formimidamide) (DS4) as inhibitors of acid corrosion of mild steel. The inhibitors were found to effectively reduce the rates of steel dissolution at the anode as well as cathodic hydrogen evolution. The order of inhibition efficiencies of studied compounds is DS1 (PDP/LPR/EIS: 98.60/97.98/96.94%) > DS2 (PDP/LPR/EIS: 98.36/96.86/96.90%) > DS3 (PDP/LPR/EIS: 94.66/87.44/94.30%) > DS4 (PDP/LPR/EIS: 83.57/77.02/75.17%) at 1.00 mM, and the overall efficiencies appeared to depend on the molecular and electronic structures of the compounds. The compounds offered high resistance to charge transfer across the electrode/electrolyte system by forming adsorbed film whose resistance increased with an increase in concentration. Findings suggested that the adsorption process involved combined chemisorption and physisorption. DFT calculations and MC simulations provided theoretical justifications for the experimental results.

Pseudo-Tetrahedral Copper(I) Symmetrical Formamidine Dithiocarbamate-Phosphine Complexes: Antibacterial, Antioxidant and Pharmacokinetics Studies

Three copper(I) dithiocarbamate–phosphine complexes of the general formula Cu(PPh3)2L were synthesized by metathesis reactions of the potassium salt of the dithiocarbamate ligand L and the precursor complex Cu(PPh3)2NO3 in an equimolar ratio. L represents N,N′-bis(2,6-dimethylphenyl)formamidine dithiocarbamate L1 in complex 1, N,N′-bis(2,6-disopropylphenyl) formamidine dithiocarbamate L2 in complex 2, and N,N′-dimesitylformamidine dithiocarbamate L3 in complex 3. The single-crystal X-ray structure revealed the coordination of the copper atom to two sulfur atoms of the dithiocarbamates, as well as two phosphorus atoms of the PPh3 units, which resulted in distorted tetrahedral geometries. The calculated τ4 (tau factor) values for 1, 2 and 3 were 0.82, 0.81 and 0.85, respectively, confirming the pseudo-tetrahedral geometry proposed. Complexes 1–3 showed remarkable luminescent properties in CH2Cl2 at room temperature. All three complexes showed moderate-to-low antibacterial potential against Gram-negative bacteria, while none of the complexes were active against Gram-positive bacteria. The DPPH assay studies showed that complex 2 had the lowest IC50 (4.99 × 10−3 mM),and had higher DPPH free radical scavenging ability than 1 and 3. The pharmacological estimations of 1–3 showed that all of the complexes showed minimal violation of Lipinski’s rule.

A study of structure-activity relationship and anion-controlled quinolinyl Ag(I) complexes as antimicrobial and antioxidant agents as well as their interaction with macromolecules

In this communication, we feature the synthesis and in-depth characterization of a series of silver(I) complexes obtained from the complexation of quinolin-4-yl Schiff base ligands ((E)-2-((quinolin-4-ylmethylene)amino)phenol L_a, 2-(quinolin-4-yl)benzo[d]thiazole L_b, (E)-N-(2-fluorophenyl)-1-(quinolin-4-yl)methanimine L_c, (E)-N-(4-chlorophenyl)-1-(quinolin-4-yl)methanimine L_d, (E)-1-(quinolin-4-yl)-N-(p-tolyl)methanimine L_e, (E)-1-(quinolin-4-yl)-N-(thiophen-2-ylmethyl)methanimine L_f) and three different silver(I) anions (nitrate, perchlorate and triflate). Structurally, the complexes adopted different coordination geometries, which included distorted linear or distorted tetrahedral geometry. The complexes were evaluated in vitro for their potential antibacterial and antioxidant activities. In addition, their interactions with calf thymus-DNA (CT-DNA) and bovine serum albumin (BSA) were evaluated. All the complexes had a wide spectrum of effective antibacterial activity against gram-positive and gram-negative bacterial and good antioxidant properties. The interactions of the complexes with CT-DNA and BSA were observed to occur either through intercalation or through a minor groove binder, while the interaction of the complexes with BSA reveals that some of the complexes can strongly quench the fluorescence of BSA through the static mechanism. The molecular docking studies of the complexes were also done to further elucidate the modes of interaction with CT-DNA and BSA.

N,N′-Diarylformamidine Dithiocarbamate Ag(I) Cluster and Coordination Polymer

An Ag(I)formamidine cluster Ag6L16 (1) and an Ag(I)formamidine coordination polymer Ag7(L2)2 2 (L1 = N,N′-bis(2,6-disopropylphenyl) formamidine dithiocarbamate and L2 = N,N′-mesityl formamidine dithiocarbamate) have been synthesized from the reactions of L1 and L2 with AgNO3 respectively. The complexes were characterized using spectroscopic and analytical methods, including single-crystal X-ray diffraction. In the structure of 1, a six vertex distorted square bi-pyramidal octahedron is formed from an Ag6 core. The N,N′-bis(2,6-disopropylphenyl) formamidine dithiocarbamate ligands stabilize this core through two main –CS2 bridging modes giving a propeller like structure. In the structure of 2, each of the two Ag(I) centers are bridged by two N,N′-mesityl formamidine dithiocarbamate ligands forming 8-member Ag2(CS2)2 metallacycles with an inversion center in the middle of the Ag—Ag argentophilic bond. The metallacycles are connected through Ag—S bonds forming ribbons in the crystallographic a-axis. The Ag(I) centers are coordinated to two N,N′-mesitylformamidine dithiocarbamates through the dithiocarbamate S atoms. The thermal decomposition of complexes 1 and 2 had similar thermograms with one major weight loss activity and the formation of elemental silver particles thereafter.

The effect of structural configuration on the DNA binding and in vitro antioxidant properties of new copper(ii) N2O2 Schiff base complexes

DNA interaction with cis and trans-copper NO complexes favours the cis configuration due to low energies observed in the cis configuration.

Copper(II)-N-hydroxy-N,N'-diarylformamidine complexes: Synthesis, crystal structures, antibacterial and molecular docking studies

A series of Cu(II) complexes were synthesized by using N-hydroxy-N,N'-diarylformamidine ligands: N-hydroxy-N,N'-(phenyl)formamidine (L1), N-hydroxy-N'-(4-methylphenyl)formamidine (L2), N-hydroxy-N,N'-(2,6-dimethylphenyl)formamidine (L3), N-hydroxy-N,N'-(2,6-diisopropylphenyl)formamidine (L4). Reaction of ligands L1-L4 with hydrated copper acetate furnished mononuclear Cu(II) complexes 1-4 with general formula [Cu-(L)₂]. The molecular structures of complexes 3 and 4, as determined by single crystal X-ray diffraction, showed both to have square planar geometry with a near C₂ symmetry. The antimicrobial potency of all four complexes was evaluated against three gram-(-) bacteria (S. typhimurium, P. aeruginosa, and E. coli) and two gram-(+) bacteria (Methicillin-resistant S. aureus (MRSA) and S. aureus), with ciprofloxacin as the reference drug. All tested complexes were inactive against gram-(+) bacteria strains except for complex 1, which displayed excellent activity when compared to the reference. Molecular docking studies showed that hydrogen bonding, pi-sigma and van der Waals interactions are prominent complex-protein connections, with complex 2 displaying good binding affinities with the studied biological targets.