Physical, biochemical, densitometric and spectroscopic techniques for characterization collagen from alternative sources: A review based on the sustainable valorization of aquatic by-products

Amine-reactive crosslinking enhances type 0 collagen hydrogel properties for regenerative medicine

Introduction

Collagen is extensively utilised in regenerative medicine due to its highly desirable properties. However, collagen is typically derived from mammalian sources, which poses several limitations, including high cost, potential risk of immunogenicity and transmission of infectious diseases, and ethical and religious constraints. Jellyfish-sourced type 0 collagen represents a safer and more environmentally sustainable alternative collagen source.

Methods

Thus, we investigated the potential of jellyfish collagen-based hydrogels, obtained from Rhizostoma pulmo (R. pulmo) jellyfish, to be utilised in regenerative medicine. A variety of R. pulmo collagen hydrogels (RpCol hydrogels) were formed by adding a range of chemical crosslinking agents and their physicochemical and biological properties were characterised to assess their suitability for regenerative medicine applications.

Results and Discussion

The characteristic chemical composition of RpCol was confirmed by Fourier-transform infrared spectroscopy (FTIR), and the degradation kinetics, morphological, and rheological properties of RpCol hydrogels were shown to be adaptable through the addition of specific chemical crosslinking agents. The endotoxin levels of RpCol were below the Food and Drug Administration (FDA) limit for medical devices, thus allowing the potential use of RpCol in vivo. 8-arm polyethylene glycol succinimidyl carboxyl methyl ester (PEG-SCM)-crosslinked RpCol hydrogels preserved the viability and induced a significant increase in the metabolic activity of immortalised human mesenchymal stem/stromal cells (TERT-hMSCs), therefore demonstrating their potential to be utilised in a wide range of regenerative medicine applications.

The Revalorization of Fishery By-Products: Types, Bioactive Compounds, and Food Applications

Recently, fish consumption has been increasing; subsequently, the number of by-products has also increased. However, generated residues are frequently discarded, and an appropriate management is necessary to properly use all fish by-products. Fishery by-products are well known for their content of bioactive compounds, such as unsaturated fatty acids, amino acids, minerals, peptides, enzymes, gelatin, collagen, and chitin. Several studies have reported that fishery by-products could provide significant properties, including antioxidant, antihypertensive, antimicrobial, anti-inflammatory, and antiobesity. Consequently, fish discards are of considerable interest to different industrial sectors, including food, nutraceuticals, medical, and pharmacology. In the food industry, the interest in using fishery by-products is focused on hydrolysates as food additives, collagen and gelatin as protein sources, chitin and chitosan to form edible films to protect food during storage, and oils as a source of Omega-3 and useful as antioxidants. Although different studies reported good results with the use of these by-products, identifying new applications in the food sector, as well as industrial applications, remains necessary.

[Efficacy and safety of undenatured type II collagen in patients with knee osteoarthritis: a multicenter, prospective, double-blind, placebo-controlled, randomized trial]

BACKGROUND

Non-pharmacological treatments based on collagen as a dietary supplement are emerging as a new area of interest to support preventive or therapeutic effects in patients with osteoarthritis (OA).

AIM

In a multicenter, prospective, double-blind, placebo-controlled, randomized study, to evaluate the effectiveness and safety of the use of the Artneo complex containing undenatured chicken collagen type II in patients with OA of the knee joints.

MATERIALS AND METHODS

The study enrolled 212 outpatients from 12 centers in the Russian Federation with knee OA, stages II and III according to the Kellgren-Lawrence classification. The participants included 171 women (80.7%) and 41 men (19.3%), with an average age of 60.2±9.0 years (range: 40 to 75 years). The study population was randomly allocated in equal proportions into two groups using an interactive web response system (IWRS). Group 1 (Artneo) consisted of 106 patients who took one capsule of the drug once daily for 180 days. Group 2 (Placebo) also had 106 patients, with the dosage form and regimen identical to Group 1. During the treatment period, the following outcomes were assessed: WOMAC index, KOOS, pain according to VAS, quality of life using the EQ-5D questionnaire, and the need for NSAIDs. All patients underwent a clinical blood test, general urine analysis, biochemical blood test, and ultrasound examination of the affected knee joint.

RESULTS

In a prospective, double-blind, placebo-controlled, randomized study, it was demonstrated that the Artneo combination, containing undenatured chicken collagen type II, has a positive effect on all clinical manifestations of OA: it effectively reduces pain, stiffness, and improves the functional state of joints and quality of life. It has a good safety profile and is superior to placebo in all parameters studied.

CONCLUSION

The results of the study confirm the good effectiveness and safety of the Artneo combination in patients with OA of the knee joints.

Enhancing Guided Bone Regeneration with a Novel Carp Collagen Scaffold: Principles and Applications

Bone defects resulting from trauma, surgery, and congenital, infectious, or oncological diseases are a functional and aesthetic burden for patients. Bone regeneration is a demanding procedure, involving a spectrum of molecular processes and requiring the use of various scaffolds and substances, often yielding an unsatisfactory result. Recently, the new collagen sponge and its structural derivatives manufactured from European carp (Cyprinus carpio) were introduced and patented. Due to its fish origin, the novel scaffold poses no risk of allergic reactions or transfer of zoonoses and additionally shows superior biocompatibility, mechanical stability, adjustable degradation rate, and porosity. In this review, we focus on the basic principles of bone regeneration and describe the characteristics of an "ideal" bone scaffold focusing on guided bone regeneration. Moreover, we suggest several possible applications of this novel material in bone regeneration processes, thus opening new horizons for further research.

Multifunctional hydrogel dressing based on fish gelatin/oxidized hyaluronate for promoting diabetic wound healing

Non-healing chronic diabetic wound treatment remains an unsolved healthcare challenge and still threatens patients' lives. Recently, hydrogel dressings based on natural biomaterials have been widely investigated to accelerate the healing of diabetic wounds. In this study, we introduce a bioactive hydrogel based on fish gelatin (FG) as a candidate for diabetic wound treatments, which is a recently emerged substitute for mammalian derived gelatin. The composite hydrogel simply fabricated with FG and oxidized hyaluronate (OHy) through Schiff base reaction could successfully accelerate wound healing due to their adequate mechanical stability and self-healing ability. In vitro studies showed that the fabricated hydrogels exhibited cytocompatibility and could reduce pro-inflammatory cytokine expression such as NO, IL-1β, TNF-α, and PGE2 in lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. In addition, the production of reactive oxygen species (ROS), a key marker of free radicals producing oxidative stress, was also reduced by fabricated hydrogels. Furthermore, in vivo experiments demonstrated that the hydrogel could promote wound closure, re-epithelialization, collagen deposition, and protein expression of CD31, CD206, and Arg1 in diabetic mice models. Our study highlights the advanced potential of FG as a promising alternative material and indicates that FOHI can be successfully used for diabetic wound healing applications.

Utilization of Lumpfish (Cyclopterus lumpus) Skin as a Source for Gelatine Extraction Using Acid Hydrolysis

Lumpfish (Cyclopterus lumpus) is an underutilized marine resource that is currently only being exploited for roe. Lumpfish skin was pre-treated with alkali (0.1M NaOH) and acid (0.1M HCl) at a skin to chemical ratio of 1:10 for 24 h at 5 °C to remove non-collagenous proteins and minerals. The pre-treated skin was washed, and gelatine was extracted with 0.1M of acetic acid at three different ratios (1:5, 1:10, and 1:15), time (12,18, and 24 h), and temperature combinations (12, 28, and 24 °C). The highest total extraction yield (>40%) was obtained with combinations of extraction ratios of 1:15 and 1:10 with a longer time (24 h) and higher temperature (18-24 °C). The highest gelatine content was obtained with an extraction period of 24 h and ratio of 1:10 (>80%). SDS-PAGE analysis confirmed the presence of type-I collagen. A rheological evaluation indicated melting and gelling temperatures, gel strength, and viscosity properties comparable to existing cold-water gelatine sources.

Characterization of Collagen from Jellyfish Aurelia aurita and Investigation of Biomaterials Potentials

Marine collagen sources are potent alternatives due to abundant yield, low pathogen infection risk, high biocompatibility, and any religious and ethical restrictions compared to terrestrial collagen sources. In this research, we aim to investigate the biomaterials potential of the collagen from Aurelia aurita, which is a native jellyfish species in the Marmara Sea. Spectroscopic techniques were used to investigate the structure of jellyfish collagen (JCol) from acid-soluble fraction and compared to Jellagen® from Rhizostoma pulmo. MALDI-TOF showed the main peak of Jellagen® at 276,765.161 Da and jellyfish collagen at 276,761.687 Da. SDS-PAGE indicated α1 and α2 bands at about 122 kDa and 140 kDa, respectively. In FTIR and Raman spectra, the locations of amide bands of both species were almost the same. The pI of JCol was determined as 4.46. The particle size decreased abruptly at 43 oC from 890 to 290 nm. Water, organic and inorganic ratios of collagen were determined at 7.14%, 63.59, and 29.27 respectively. In DSC, the denaturation temperature (Td) of JCol was found at 43.7 oC and found to be higher than that of the collagens from jellyfishes that have been reported so far in the literature. Biocompatibility testing by metabolic assay revealed significantly higher fibroblast proliferation on collagen film than on the Tissue Culture Plate. To conclude, Aurelia aurita collagen would be a suitable source of collagen when biomaterials are needed to have high biocompatibility and unique macromolecular properties such as high denaturation temperatures.

Gastrointestinal delivery of codfish Skin-Derived collagen Hydrolysates: Deep eutectic solvent extraction and bioactivity analysis

The fishing industry produces substantial by-products, such as heads, skins, bones, and scales, rich in collagen-a prevalent protein in these materials. However, further application of deep eutectic solvent-based extraction remains unexplored. In this study, we extracted collagen with urea: propanoic acid mixture (U:PA; 1:2) with a 2.2 % yield, followed by enzymatic hydrolysis with alcalase for 120 min. The resulting bioactive peptides demonstrated notable antioxidant activity (961 µmol TE) and antihypertensive properties (39.3 % ACE inhibition). Subsequently, we encapsulated 39.3 % of these hydrolysates in chitosan-TPP capsules, which released about 58 % of their content, primarily in the intestine, as mimicked in the in vitro model of the gastrointestinal tract. Although the digestion process did not significantly alter the size of the non-encapsulated collagen peptides, it did influence their health benefits. The promising results suggest that further research could optimize the use of collagen from fish by-products, potentially offering a sustainable source for health products.

Structural and molecular characterization of collagen-type I extracted from lamb feet

This study aimed to extract collagen-I from lamb feet (LF) and examine the effects of ultrasound treatment on the structural and molecular characteristics of the collagen. Compared to ultrasonic bath treatment and conventional extraction methods, ultrasonic probe (USP) treatment significantly increased the collagen content of the extract (p < 0.05). The electrophoretic profiles confirmed the presence of α- and β-chains, indicating it as type I. Furthermore, X-ray diffraction, Fourier-transform infrared spectroscopy, and circular dichroism spectra analyses revealed that the extraction method did not adversely affect the triple helix structure of the collagen. Moreover, the fibrillar structure of the collagen samples was verified through scanning electron microscopy analyses. Notably, the LF collagen exhibited a high thermal denaturation temperature owing to its elevated imino acid content. The collagen samples exhibited high solubility in acidic pH but low solubility in high salt concentrations. The present findings signified that sonication with USP can effectively enhance the yield of collagen from LF without compromising its quality. PRACTICAL APPLICATION: This study showed that ultrasonication enhanced the collagen concentration without disturbing the integrity of lamb feet collagen. We expect that lamb feet collagen can be used for industrial processes and consumer products thanks to unique product properties.

Marine collagen: Unveiling the blue resource-extraction techniques and multifaceted applications

Marine organisms such as fish and shellfish are composed of compounds with properties and characteristics that have been proven useful in a variety of sectors such as cosmetics, healthcare (wound healing), food industries, and tissue engineering. Collagen extraction from fish waste as a "blue resource" has attracted research attention over the past decade. Around 75 % of fish waste contains a high concentration of collagen. This has driven research in the conversion of these low-cost by-products into valuable products. Collagen extracted by acidic or/and enzymatic methods is gaining a lot of attention today due to its low cost and high yield. Fermentation and enzymatic hydrolysis stand out as one of the most environmentally sustainable and ecologically friendly methods for collagen extraction. Because of its great biocompatibility, excellent bioactivity, and low antigenicity, marine collagen is receiving more attention. Furthermore, collagen-derived peptides may exhibit interesting antioxidant activity, potent antihypertensive activity, and antimicrobial activity against different strains of bacteria. This review focuses on the advancements in extraction and detection methods of marine collagen, both from a technological and legislative standpoint, in addition to exploring its diverse range of application domains.

Feasibility of Enzymatic Protein Extraction from a Dehydrated Fish Biomass Obtained from Unsorted Canned Yellowfin Tuna Side Streams: Part I

This study presents for the first time a scalable process for the extraction of valuable proteins starting from samples of unsorted mixed tuna scraps which were previously dehydrated by an industrial patented process. The aims of this work were both to avoid the onerous sorting step of tuna leftovers, which generally consists of isolating skin and bones for collagen/gelatin extraction, and to improve the logistic of managing highly perishable biomass thanks to the reduction in its volume and to its microbiological stabilization. In view of a zero-waste economy, all the protein fractions (namely, non-collagenous proteins NCs and ALKs, gelatin, and hydrolyzed gelatin peptides, HGPs) isolated in the proposed single cascade flowchart were stabilized and preliminarily characterized. The extraction flowchart proposed allows one to obtain the following most promising compounds: 1.7 g of gelatin, 3.2 g of HGPs, and 14.6 g of NCs per 100 g of dehydrated starting material. A focus on oven-dried gelatin was reported in terms of proximate analysis, amino acid composition, color parameters, FT-IR spectrum, pH, and viscoelastic properties (5 mPa·s of viscosity and 14.3 °C of gelling temperature). All the obtained extracts are intended to be exploited in food supplements, feed, fertilizers/plant bio-stimulants, packaging, and the cosmetic industry.

Trash to Treasure: An Up-to-Date Understanding of the Valorization of Seafood By-Products, Targeting the Major Bioactive Compounds

Fishery production is exponentially growing, and its by-products negatively impact industries' economic and environmental status. The large amount of bioactive micro- and macromolecules in fishery by-products, including lipids, proteins, peptides, amino acids, vitamins, carotenoids, enzymes, collagen, gelatin, chitin, chitosan, and fucoidan, need to be utilized through effective strategies and proper management. Due to the bioactive and healthy compounds in fishery discards, these components can be used as functional food ingredients. Fishery discards have inorganic or organic value to add to or implement in various sectors (such as the agriculture, medical, and pharmaceutical industries). However, the best use of these postharvest raw materials for human welfare remains unelucidated in the scientific community. This review article describes the most useful techniques and methods, such as obtaining proteins and peptides, fatty acids, enzymes, minerals, and carotenoids, as well as collagen, gelatin, and polysaccharides such as chitin-chitosan and fucoidan, to ensure the best use of fishery discards. Marine-derived bioactive compounds have biological activities, such as antioxidant, anticancer, antidiabetic, anti-inflammatory, and antimicrobial activities. These high-value compounds are used in various industrial sectors, such as the food and cosmetic industries, owing to their unique functional and characteristic structures. This study aimed to determine the gap between misused fishery discards and their effects on the environment and create awareness for the complete valorization of fishery discards, targeting a sustainable world.

Collagen-Based Hydrogels for the Eye: A Comprehensive Review

Collagen-based hydrogels have emerged as a highly promising platform for diverse applications in ophthalmology, spanning from drug delivery systems to biomedical interventions. This review explores the diverse sources of collagen, which give rise to different types of collagen protein. The critical isolation and purification steps are discussed, emphasizing their pivotal role in preparing collagen for biomedical use. To ensure collagen quality and purity, and the suitability of collagen for targeted applications, a comprehensive characterization and quality control are essential, encompassing assessments of its physical, chemical, and biological properties. Also, various cross-linking collagen methods have been examined for providing insight into this crucial process. This comprehensive review delves into every facet of collagen and explores the wide-ranging applications of collagen-based hydrogels, with a particular emphasis on their use in drug delivery systems and their potential in diverse biomedical interventions. By consolidating current knowledge and advancements in the field, this review aims to provide a detailed overview of the utilization of engineered collagen-based hydrogels in ocular therapeutics.

2D Collagen Membranes from Marine Demosponge Chondrosia reniformis (Nardo, 1847) for Skin-Regenerative Medicine Applications: An In Vitro Evaluation

Research in tissue engineering and regenerative medicine has an ever-increasing need for innovative biomaterials suitable for the production of wound-dressing devices and artificial skin-like substitutes. Marine collagen is one of the most promising biomaterials for the production of such devices. In this study, for the first time, 2D collagen membranes (2D-CMs) created from the extracellular matrix extract of the marine demosponge Chondrosia reniformis have been evaluated in vitro as possible tools for wound healing. Fibrillar collagen was extracted from a pool of fresh animals and used for the creation of 2D-CMs, in which permeability to water, proteins, and bacteria, and cellular response in the L929 fibroblast cell line were evaluated. The biodegradability of the 2D-CMs was also assessed by following their degradation in PBS and collagenase solutions for up to 21 days. Results showed that C. reniformis-derived membranes avoided liquid and protein loss in the regeneration region and also functioned as a strong barrier against bacteria infiltration into a wound. Gene expression analyses on fibroblasts stated that their interaction with 2D-CMs is able to improve fibronectin production without interfering with the regular extracellular matrix remodeling processes. These findings, combined with the high extraction yield of fibrillar collagen obtained from C. reniformis with a solvent-free approach, underline how important further studies on the aquaculture of this sponge could be for the sustainable production and biotechnological exploitation of this potentially promising and peculiar biopolymer of marine origin.

The investigation of batch-to-batch variabilities in the composition of isolates from fish and mammalian species using different protocols

The aim of this study was to investigate batch-to-batch inconsistencies in the processing of pig and fish collagen isolates processed using two protocols that differed in terms of the acetic acid concentrations applied and the pre- and post-extraction steps, and which were previously tested in our laboratory with the intention of preserving the biological structures and functions of the collagen isolates for biomedical purposes. Both the major and minor components such as the amino acids, lipids, water, glycosaminoglycan and ash contents and elemental content, as well as the structure and morphology of the raw sources and the resulting batches of isolates were subsequently examined in detail applying standardized analytical methods including high perfomance liquid chromatography, ultraviolet-visible and infrared spectrometry, polyacrylamide gel electrophoresis, energy dispersive spectroscopy and scanning electron microscopy. All the fish isolates provided severalfold higher yields (8-45 wt%) than did the pig isolates (3-9 wt%). In addition, the variability of the fish isolate yields (the coefficient of variation for processing A: 16.4-32.9 % and B: 6.8-17.4 %) was significantly lower (p ≤ 0.05, n = 5) than that of the pig isolates (A: 27.7-69.8 %; B: 35.3-87.9 %). In general, the fish skin batches had significantly higher protein contents (˃60 wt%) and lower lipid contents (<10 wt%) than the pig skin batches (<55 wt% protein and up to 66 wt% lipid). In addition, the fish skin batches did not differ significantly in terms of their composition applying the same processing method, whereas the pig skin batches exhibited considerable variations in terms of their compositions, particularly regarding the protein and lipid contents. It can be stated that, concerning the fish isolates, processing B was, in most cases, slightly more efficient and reproducible than processing A. However, concerning the pig isolates, although processing A appeared to be more efficient than processing B in terms of the yield, it resulted in the production of isolates that contained a certain level of contaminants. The study provides a comprehensive discussion on the suitability of the processing protocol in terms of producing batches of reproducible quality according to the specific type of biomaterial processed from different animal species.

Valorization of Salmo salar Skin Waste for the Synthesis of Angiotensin Converting Enzyme-1 (ACE1) Inhibitory Peptides

One of potential inhibitors which is widely used for the clinical treatment of COVID-19 in comorbid patients is Angiostensin Converting Enzyme-1 (ACE1) inhibitor. A safer peptide-based ACE1 inhibitor derived from salmon skin collagen, that is considered as the by-product of the fish processing industry have been investigated in this study. The inhibitory activity against ACE1 was examined using in vitro and in silico methods. In vitro analysis includes the extraction of acid-soluble collagen, characterization using FTIR, Raman, UV-Vis, XRD, cytotoxicity assay, and determination of inhibition against ACE1. In silico method visualizes binding affinity, molecular interaction, and inhibition type of intact collagen and active peptides derived from collagen against ACE1 using molecular docking. The results of FTIR spectra detected amide functional groups (A, B, I, II, III) and imine proline/hydroxyproline, while the results of Raman displayed peak absorption of amide I, amide III, proline/hydroxyproline ring, phenylalanine, and protein backbone. Furthermore, UV-Vis spectra showed typical collagen absorption at 230 nm and based on XRD data, the chain types in the samples were α-helix. ACE1 inhibition activity was obtained in a concentration-dependent manner where the highest was 82.83% and 85.84% at concentrations of 1000, and 2000 µg/mL, respectively, and showed very low cytotoxicity at the concentration less than 1000 µg/mL. In silico study showed an interaction between ACE1 and collagen outside the active site with the affinity of - 213.89 kcal/mol. Furthermore, the active peptides of collagen displayed greater affinity compared to lisinopril, namely HF (His-Phe), WYT (Trp-Tyr-Thr), and WF (Trp-Phe) of - 11.52; - 10.22; - 9.58 kcal/mol, respectively. The salmon skin-derived collagen demonstrated ACE1 inhibition activity with a non-competitive inhibition mechanism. In contrast, the active peptides were predicted as potent competitive inhibitors against ACE1. This study indicated that valorization of fish by-product can lead to the production of a promising bioactive compound to treat COVID-19 patient with diabetic comorbid.

Graphical Abstract

A Thermostable Type I Collagen from Swim Bladder of Silver Carp (Hypophthalmichthys molitrix)

As a major component of the extracellular matrix, collagen has been used as a biomaterial for many purposes including tissue engineering. Commercial collagen derived from mammals is associated with a risk of prion diseases and religious restrictions, while fish-derived collagen can avoid such issues. In addition, fish-derived collagen is widely available and low-cost; however, it often suffers from poor thermal stability, which limits its biomedical application. In this study, collagen with a high thermal stability was successfully extracted from the swim bladder of silver carp (Hypophthalmichthys molitrix) (SCC). The results demonstrated that it was a type I collagen with high purity and well-preserved triple-helix structure. Amino acid composition assay showed that the amounts of threonine, methionine, isoleucine and phenylalanine in the collagen of swim bladder of silver carp were higher than those of bovine pericardium. After adding salt solution, swim-bladder-derived collagen could form fine and dense collagen fibers. In particular, SCC exhibited a higher thermal denaturation temperature (40.08 °C) compared with collagens from the swim bladder of grass carp (Ctenopharyngodon idellus) (GCC, 34.40 °C), bovine pericardium (BPC, 34.47 °C) and mouse tail (MTC, 37.11 °C). Furthermore, SCC also showed DPPH radical scavenging ability and reducing power. These results indicate that SCC presents a promising alternative source of mammalian collagen for pharmaceutical and biomedical applications.

Collagen Supplementation for Joint Health: The Link between Composition and Scientific Knowledge

Osteoarthritis (OA) is the most common joint disease, generating pain, disability, and socioeconomic costs worldwide. Currently there are no approved disease-modifying drugs for OA, and safety concerns have been identified with the chronic use of symptomatic drugs. In this context, nutritional supplements and nutraceuticals have emerged as potential alternatives. Among them, collagen is being a focus of particular interest, but under the same term different types of collagens coexist with different structures, compositions, and origins, leading to different properties and potential effects. The aim of this narrative review is to generally describe the main types of collagens currently available in marketplace, focusing on those related to joint health, describing their mechanism of action, preclinical, and clinical evidence. Native and hydrolyzed collagen are the most studied collagen types for joint health. Native collagen has a specific immune-mediated mechanism that requires the recognition of its epitopes to inhibit inflammation and tissue catabolism at articular level. Hydrolyzed collagen may contain biologically active peptides that are able to reach joint tissues and exert chondroprotective effects. Although there are preclinical and clinical studies showing the safety and efficacy of food ingredients containing both types of collagens, available research suggests a clear link between collagen chemical structure and mechanism of action.

Extraction and Characterization of Pepsin- and Acid-Soluble Collagen from the Swim Bladders of Megalonibea fusca

There is a growing demand for the identification of alternative sources of collagen not derived from land-dwelling animals. The present study explored the use of pepsin- and acid-based extraction protocols to isolate collagen from the swim bladders of Megalonibea fusca. After extraction, these acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) samples respectively were subjected to spectral analyses and sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) characterization, revealing both to be comprised of type I collagen with a triple-helical structure. The imino acid content of these ASC and PSC samples was 195 and 199 residues per 1000 residues, respectively. Scanning electron microscopy demonstrated that samples of freeze-dried collagen exhibited a compact lamellar structure, while transmission electron microscopy and atomic force microscopy confirmed the ability of these collagens to undergo self-assembly into fibers. ASC samples exhibited a larger fiber diameter than the PSC samples. The solubility of both ASC and PSC was highest under acidic pH conditions. Neither ASC nor PSC caused any cytotoxicity when tested in vitro, which met one of the requirements for the biological evaluation of medical devices. Thus, collagen isolated from the swim bladders of Megalonibea fusca holds great promise as a potential alternative to mammalian collagen.

Recovery of Bioactive Compounds from Marine Organisms: Focus on the Future Perspectives for Pharmacological, Biomedical and Regenerative Medicine Applications of Marine Collagen

Marine environments cover more than 70% of the Earth's surface and are among the richest and most complex ecosystems. In terms of biodiversity, the ocean represents an important source, still not widely exploited, of bioactive products derived from species of bacteria, plants, and animals. However, global warming, in combination with multiple anthropogenic practices, represents a serious environmental problem that has led to an increase in gelatinous zooplankton, a phenomenon referred to as jellyfish bloom. In recent years, the idea of "sustainable development" has emerged as one of the essential elements of green-economy initiatives; therefore, the marine environment has been re-evaluated and considered an important biological resource. Several bioactive compounds of marine origin are being studied, and among these, marine collagen represents one of the most attractive bio-resources, given its use in various disciplines, such as clinical applications, cosmetics, the food sector, and many other industrial applications. This review aims to provide a current overview of marine collagen applications in the pharmacological and biomedical fields, regenerative medicine, and cell therapy.

Collagen Derived from Fish Industry Waste: Progresses and Challenges

Fish collagen garnered significant academic and commercial focus in the last decades featuring prospective applications in a variety of health-related industries, including food, medicine, pharmaceutics, and cosmetics. Due to its distinct advantages over mammalian-based collagen, including the reduced zoonosis transmission risk, the absence of cultural-religious limitations, the cost-effectiveness of manufacturing process, and its superior bioavailability, the use of collagen derived from fish wastes (i.e., skin, scales) quickly expanded. Moreover, by-products are low cost and the need to minimize fish industry waste's environmental impact paved the way for the use of discards in the development of collagen-based products with remarkable added value. This review summarizes the recent advances in the valorization of fish industry wastes for the extraction of collagen used in several applications. Issues related to processing and characterization of collagen were presented. Moreover, an overview of the most relevant applications in food industry, nutraceutical, cosmetics, tissue engineering, and food packaging of the last three years was introduced. Lastly, the fish-collagen market and the open technological challenges to a reliable recovery and exploitation of this biopolymer were discussed.

Extraction and characterization of collagen from the skin of Amazonian freshwater fish pirarucu

The need to fully exploit fishing resources due to increasing production and consequent waste generation requires research to promote the sustainability of the fishing industry. Fish waste from the industry is responsible for relevant environmental contamination. However, these raw materials contain high amounts of collagen and other biomolecules, being attractive due to their industrial and biotechnological applicability. Thus, to reduce the waste from pirarucu (Arapaima gigas) processing, this study aimed to obtain collagen from pirarucu skin tissue. The extraction process used 0.05 M sodium hydroxide, 10% butyl alcohol, and 0.5 M acetic acid, with extraction temperature of 20°C. The obtained yield was 27.8%, and through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), it was determined that the collagen obtained was type I. This study showed that collagen solubility was highest at pH 3 and the lowest solubility was at concentrations of 3% sodium chloride. The denaturation temperature of collagen was 38.1°C, and its intact molecular structure was observed using the Fourier transform infrared spectrophotometry technique with an absorption radius of 1. The results showed that it was possible to obtain collagen from pirarucu skin at 20°C, which has the typical characteristics of commercial type I collagen. In conclusion, the procedures used may be considered to be an interesting alternative for collagen extraction, a new product obtained from the processing of fish waste.

Collagen and Keratin Hydrolysates to Delay the Setting of Gypsum Plaster

Leather and wool waste represent a high concern due to the low level of valorization and circular economy demands for upcycling of biomass resources. Both biomasses can be easily processed as protein hydrolysates and used as functional additives due to the amphiphilic and tunable properties of collagen and keratin proteins. The chemical, physical, and structural investigations of collagen and keratin hydrolysate properties showed that the chelating abilities due to carboxylic groups can be exploited for gypsum retardant additives. The molecular weights and amino acid compositions of three different hydrolysates showed only slight influences on the setting time of gypsum; all three proteins delayed the setting time of gypsum between 60 and 120 min, as compared to the commercial plaster with a 30 min setting time. Higher molecular weight and more carboxylic active groups showed slight improvements in the setting time of mortars. The improved properties of keratin hydrolysate as compared to low molecular collagen hydrolysate were attributed to foaming and conductive properties. The mechanism of mortar setting delaying through calcium ions complexation by protein hydrolysates was shown by electric conductivity evolution of plasters with and without protein additives over time, supported by foaming properties, amino acid, and functional groups' composition. Lower bending strength values for the higher concentration of proteins do not reduce the potential to use the protein hydrolysates as retardant additives in mortar fabrication.

Characteristics and Properties of Acid- and Pepsin-Solubilized Collagens from the Tail Tendon of Skipjack Tuna (Katsuwonus pelamis)

The tail tendons of skipjack tuna (Katsuwonus pelamis), a by-product from the meat-separation process in canned-tuna production, was used as an alternative source of collagen extraction. The acid-solubilized collagens using vinegar (VTC) and acetic-acid (ATC) extraction and pepsin-solubilized collagen (APTC) were extracted from tuna-tail tendon. The physiochemical properties and characteristics of those collagens were investigated. The obtained yield of VTC, ATC, and APTC were 7.88 ± 0.41, 8.67 ± 0.35, and 12.04 ± 0.07%, respectively. The determination of protein-collagen solubility, the effect of pH and NaCl on collagen solubility, Fourier-transform infrared spectroscopy (FTIR) spectrum, and microstructure of the collagen-fibril surface using a scanning electron microscope (SEM) were done. The protein solubility of VTC, ATC, and APTC were 0.44 ± 0.03, 0.52 ± 0.07, and 0.67 ± 0.12 mg protein/mg collagen. The solubility of collagen decreased with increasing of NaCl content. These three collagens were good solubility at low pH with the highest solubility at pH 5. The FTIR spectrum showed absorbance of Amide A, Amide B, Amide I, Amide II, and Amide III groups as 3286-3293 cm^-1, 2853-2922 cm^-1, 1634-1646 cm^-1, 1543-1544 cm^-1, and 1236-1237 cm^-1, respectively. The SEM analysis indicated a microstructure of collagen surface as folding of fibril with small pore.

Preparation of immobilized pepsin for extraction of collagen from bovine hide

In the extraction of collagens from mammalian tissues, the free pepsin used in the acid-pepsin extraction system is hard to recycle, and there is a risk of enzyme protein contamination in the extracted collagen products, which limits their applications. To solve this problem, an immobilized pepsin was successfully prepared via the covalent crosslinking of glutaraldehyde using a 3-aminopropyltriethoxysilane (APTES) surface modified silica clay as the support. The immobilized pepsin was applied for the extraction of collagen from bovine hide. The optimal immobilization process involves incubating pepsin with an initial concentration of 35 mg mL^-1 and glutaraldehyde with 5% activated APTES modified silica clay at 25 °C for 60 min, by which the loading amount of pepsin was 220 mg g^-1 and the activity of the immobilized pepsin was 4.2 U mg^-1. The collagen extracted using acetic acid and the immobilized pepsin method retained its complete triple helix structure. This research thus details an effective separation method using pepsin for extraction of collagen via an acetic acid-enzyme method, where the extracted collagen may be a candidate for use in biomaterial applications.

Graft Polymerization of Acrylamide in an Aqueous Dispersion of Collagen in the Presence of Tributylborane

Graft copolymers of collagen and polyacrylamide (PAA) were synthesized in a suspension of acetic acid dispersion of fish collagen and acrylamide (AA) in the presence of tributylborane (TBB). The characteristics of the copolymers were determined using infrared spectroscopy and gel permeation chromatography (GPC). Differences in synthesis temperature between 25 and 60 °C had no significant effect on either proportion of graft polyacrylamide generated or its molecular weight. However, photomicrographs taken with the aid of a scanning electron microscope showed a breakdown of the fibrillar structure of the collagen within the copolymer at synthesis temperatures greater than 25 °C. The mechanical properties of the films and the cytotoxicity of the obtained copolymer samples were studied. The sample of a hybrid copolymer of collagen and PAA obtained at 60 °C has stronger mechanical properties compared to other tested samples. Its low cytotoxicity, when the monomer is removed, makes materials based on it promising in scaffold technologies.

Collagen Alignment via Electro-Compaction for Biofabrication Applications: A Review

As the most prevalent structural protein in the extracellular matrix, collagen has been extensively investigated for biofabrication-based applications. However, its utilisation has been impeded due to a lack of sufficient mechanical toughness and the inability of the scaffold to mimic complex natural tissues. The anisotropic alignment of collagen fibres has been proven to be an effective method to enhance its overall mechanical properties and produce biomimetic scaffolds. This review introduces the complicated scenario of collagen structure, fibril arrangement, type, function, and in addition, distribution within the body for the enhancement of collagen-based scaffolds. We describe and compare existing approaches for the alignment of collagen with a sharper focus on electro-compaction. Additionally, various effective processes to further enhance electro-compacted collagen, such as crosslinking, the addition of filler materials, and post-alignment fabrication techniques, are discussed. Finally, current challenges and future directions for the electro-compaction of collagen are presented, providing guidance for the further development of collagenous scaffolds for bioengineering and nanotechnology.

Physicochemical, Structural and Antioxidant Properties of Collagens from the Swim Bladder of Four Fish Species

This study aimed to isolate and characterize pepsin-solubilized collagen (PSC) from marine and freshwater fish swim bladders. The physicochemical properties, protein pattern, amino acid composition, structure, thermal denaturation temperature, and antioxidant activity of PSC from four different swim bladder sources were investigated and compared. The results demonstrated that the four types of collagen extracted were all type I collagen. The yield of PSC extracted from grass carp (GCSB-PSC), bighead carp (BCSB-PSC), grouper (GSB-PSC), and monkfish swim bladders (MSB-PSC) were 38.98, 27.97, 18.16, and 10.35%, respectively. Compared to the other three PSCs, BCSB-PSC has the highest thermal denaturation temperature (38.60 °C). Based on FTIR spectroscopy and circular dichroism (CD) analysis, the extracted PSCs retained the triple helix and secondary structure well. Antioxidant studies showed that in the swim bladders of four species the swim bladder PSC could scavenge DPPH and ABTS radicals. Overall, swim bladders from marine and freshwater fish can be utilized as raw materials for collagen extraction, and the extracted collagen has potential commercial applications.

Gelatin/sodium alginate hydrogel-coated decellularized porcine coronary artery to construct bilayer tissue engineered blood vessels

Cardiovascular diseases and vascular trauma can be commonly found in the population. Scholars worldwide hope to develop small-diameter vascular grafts that can replace autologous vessels for clinical use. Decellularized blood vessels can retain the original morphology, structure, and physical properties of blood vessels, which is conducive to cell growth, proliferation, and differentiation. In this study, porcine coronary arteries (PCAs) were decellularized to prepare decellularized porcine coronary artery (DPCA), and bilayer hybrid scaffolds were prepared by coating gelatin and sodium alginate mixed hydrogel of seven different proportions and combined with mouse fibroblasts (L929 cells) to study the construction of tissue engineering vessels in vitro. The obtained bilayer hybrid scaffolds were 3-7 cm in length, 5 mm in external diameter, and 1 mm in average wall thickness. All seven bilayer hybrid scaffolds showed good biocompatibility after cell inoculation. Compared with 2D culture, cells on 3D scaffolds grew relatively slowly in the first 4 days, and the number of cells proliferated rapidly at 7 days. In the same culture days, different concentrations of hydrogel also had an impact on cell proliferation. With the increase of hydrogel content, cells on the 3D scaffold formed cell colonies faster. The results showed that the scaffold had good biocompatibility and could meet the needs of artificial blood vessel construction.

Aquaponics-Derived Tilapia Skin Collagen for Biomaterials Development

Collagen is one of the most widely used biomaterials in health-related sectors. The industrial production of collagen mostly relies on its extraction from mammals, but several issues limited its use. In the last two decades, marine organisms attracted interest as safe, abundant, and alternative source for collagen extraction. In particular, the possibility to valorize the huge quantity of fish industry waste and byproducts as collagen source reinforced perception of fish collagen as eco-friendlier and particularly attractive in terms of profitability and cost-effectiveness. Especially fish byproducts from eco-sustainable aquaponics production allow for fish biomass with additional added value and controlled properties over time. Among fish species, Oreochromis niloticus is one of the most widely bred fish in large-scale aquaculture and aquaponics systems. In this work, type I collagen was extracted from aquaponics-raised Tilapia skin and characterized from a chemical, physical, mechanical, and biological point of view in comparison with a commercially available analog. Performed analysis confirmed that the proprietary process optimized for type I collagen extraction allowed to isolate pure native collagen and to preserve its native conformational structure. Preliminary cellular studies performed with mouse fibroblasts indicated its optimal biocompatibility. All data confirmed the eligibility of the extracted Tilapia-derived native type I collagen as a biomaterial for healthcare applications.

Protein-Based Hydrogels: Promising Materials for Tissue Engineering

The successful design of a hydrogel for tissue engineering requires a profound understanding of its constituents' structural and molecular properties, as well as the proper selection of components. If the engineered processes are in line with the procedures that natural materials undergo to achieve the best network structure necessary for the formation of the hydrogel with desired properties, the failure rate of tissue engineering projects will be significantly reduced. In this review, we examine the behavior of proteins as an essential and effective component of hydrogels, and describe the factors that can enhance the protein-based hydrogels' structure. Furthermore, we outline the fabrication route of protein-based hydrogels from protein microstructure and the selection of appropriate materials according to recent research to growth factors, crucial members of the protein family, and their delivery approaches. Finally, the unmet needs and current challenges in developing the ideal biomaterials for protein-based hydrogels are discussed, and emerging strategies in this area are highlighted.

Marine Biopolymers: Applications in Food Packaging

Marine sources are gaining popularity and attention as novel materials for manufacturing biopolymers such as proteins and polysaccharides. Due to their biocompatibility, biodegradability, and non-toxicity features, these biopolymers have been claimed to be beneficial in the development of food packaging materials. Several studies have thoroughly researched the extraction, isolation, and latent use of marine biopolymers in the fabrication of environmentally acceptable packaging. Thus, a review was designed to provide an overview of (a) the chemical composition, unique properties, and extraction methods of marine biopolymers; (b) the application of marine biopolymers in film and coating development for improved shelf-life of packaged foods; (c) production flaws and proposed solutions for better isolation of marine biopolymers; (d) methods of preparation of edible films and coatings from marine biopolymers; and (e) safety aspects. According to our review, these biopolymers would make a significant component of a biodegradable food packaging system, reducing the amount of plastic packaging used and resulting in considerable environmental and economic benefits.

A Collagen Basketweave from the Giant Squid Mantle as a Robust Scaffold for Tissue Engineering

The growing applications of tissue engineering technologies warrant the search and development of biocompatible materials with an appropriate strength and elastic moduli. Here, we have extensively studied a collagenous membrane (GSCM) separated from the mantle of the Giant squid Dosidicus Gigas in order to test its potential applicability in regenerative medicine. To establish the composition and structure of the studied material, we analyzed the GSCM by a variety of techniques, including amino acid analysis, SDS-PAGE, and FTIR. It has been shown that collagen is a main component of the GSCM. The morphology study by different microscopic techniques from nano- to microscale revealed a peculiar packing of collagen fibers forming laminae oriented at 60-90 degrees in respect to each other, which, in turn, formed layers with the thickness of several microns (a basketweave motif). The macro- and micromechanical studies showed high values of the Young's modulus and tensile strength. No significant cytotoxicity of the studied material was found by the cytotoxicity assay. Thus, the GSCM consists of a reinforced collagen network, has high mechanical characteristics, and is non-toxic, which makes it a good candidate for the creation of a scaffold material for tissue engineering.

Effect of Solvent on the Hydrodynamic Properties of Collagen

In this study, the effect of solvent on the hydrodynamic properties of collagen extracted from tail tendons of young rats was researched. Collagen was dissolved in various aqueous carboxylic acid solutions, including acetic acid (AA), acetic acid with the addition of sodium chloride (AA/NaCl), formic acid (FA), lactic acid (LA), citric acid (CA), and also citrate buffer at pH = 3.7 (CB). The properties of collagen solutions at a concentration of 0.45 mg/mL were characterized based on the viscometric method. The reduced viscosity, intrinsic viscosity, and Huggins coefficient of collagen solutions and effect of solvent, temperature, and UV irradiation on these properties were investigated. Collagen solutions in acetic acid, acetic acid/NaCl, and citrate buffer were irradiated with UV light up to 1 h, and the viscosity of collagen solutions was measured. It was found that the organic acids used as solvent affected viscosity behavior, denaturation temperature, and stability of collagen solutions. The lowest values of studied parameters were obtained for the collagen solutions in acetic acid with the addition of sodium chloride. Thus, the effect of various aqueous carboxylic acid solutions on collagen solutions properties and denaturation temperature can also be affected by the sodium chloride addition. The results of this research can be crucial for the preparation of collagen solutions for both cosmetic and biomedical applications.

Preparation and Characterization of Thermally Stable Collagens from the Scales of Lizardfish (Synodus macrops)

Marine collagen is gaining vast interest because of its high biocompatibility and lack of religious and social restrictions compared with collagen from terrestrial sources. In this study, lizardfish (Synodus macrops) scales were used to isolate acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC). Both ASC and PSC were identified as type I collagen with intact triple-helix structures by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and spectroscopy. The ASC and PSC had high amino acids of 237 residues/1000 residues and 236 residues/1000 residues, respectively. Thus, the maximum transition temperature (T_max) of ASC (43.2 °C) was higher than that of PSC (42.5 °C). Interestingly, the T_max of both ASC and PSC was higher than that of rat tail collagen (39.4 °C) and calf skin collagen (35.0 °C), the terrestrial collagen. Solubility tests showed that both ASC and PSC exhibited high solubility in the acidic pH ranges. ASC was less susceptible to the “salting out” effect compared with PSC. Both collagen types were nontoxic to HaCaT and MC3T3-E1 cells, and ASC was associated with a higher cell viability than PSC. These results indicated that ASC from lizardfish scales could be an alternative to terrestrial sources of collagen, with potential for biomedical applications.

Changes in the Molecular Characteristics of Bovine and Marine Collagen in the Presence of Proteolytic Enzymes as a Stage Used in Scaffold Formation

Biopolymers, in particular collagen and fibrinogen, are the leading materials for use in tissue engineering. When developing technology for scaffold formation, it is important to understand the properties of the source materials as well as the mechanisms that determine the formation of the scaffold structures. Both factors influence the properties of scaffolds to a great extent. Our present work aimed to identify the features of the molecular characteristics of collagens of different species origin and the changes they undergo during the enzymatic hydrolysis used for the process of scaffold formation. For this study, we used the methods of gel-penetrating chromatography, dynamic light scattering, reading IR spectra, and scanning electron microscopy. It was found that cod collagen (CC) and bovine collagen (BC) have different initial molecular weight parameters, and that, during hydrolysis, the majority of either type of protein is hydrolyzed by the proteolytic enzymes within the first minute. The differently sourced collagen samples were also hydrolyzed with the formation of two low molecular fractions: Mw ~ 10 kDa and ~20 kDa. In the case of CC, the microstructure of the final scaffolds contained denser, closely spaced fibrillar areas, while the BC-sourced scaffolds had narrow, short fibrils composed of unbound fibers of hydrolyzed collagen in their structure.

Exploring Effects of Protease Choice and Protease Combinations in Enzymatic Protein Hydrolysis of Poultry By-Products

A study of the effects of single and combined protease hydrolysis on myofibrillar versus collagenous proteins of poultry by-products has been conducted. The aim was to contribute with knowledge for increased value creation of all constituents of these complex by-products. A rational approach was implemented for selecting proteases exhibiting the most different activity towards the major protein-rich constituents of mechanically deboned chicken residue (MDCR). An initial activity screening of 18 proteases on chicken meat, turkey tendons and MDCR was conducted. Based on weight yield, size exclusion chromatography (SEC) and SDS-PAGE, stem Bromelain and Endocut-02 were selected. Studies on hydrolysis of four different poultry by-products at 40 °C, evaluated by protein yield, SEC, and SDS-PAGE, indicate that the proteases’ selectivity difference can be utilized in tailor-making hydrolysates, enriched in either meat- and collagen-derived peptides or gelatin. Three modes of stem Bromelain and Endocut-02 combinations during hydrolysis of MDCR were performed and compared with single protease hydrolysis. All modes of the protease combinations resulted in a similar approximately 15% increase in product yield, with products exhibiting similar SEC and SDS-PAGE profiles. This shows that irrespective of the modes of combination, the use of more than one enzyme in hydrolysis of collagen-rich material can provide means to increase the total protein yield and ultimately contribute to increased value creation of poultry by-products.

Comparison of collagen characteristic from the skin and swim bladder of Gulf corvina (Cynoscion othonopterus)

Collagens extracted from different tissues and fish species display different physicochemical properties, thus novel sources require characterization. Gulf corvina (Cynoscion othonopterus) is processed industrially for food. Of the by-products, the swim bladder is used for fish maw, but other tissues are treated as waste. In the present study, pepsin-soluble collagen from Gulf corvina skin and swim bladder was extracted and characterized. Skin produced a higher collagen yield (82 ± 1.53 %) than swim bladder (69 ± 1.60 %). Both collagens exhibited electrophoresis bands corresponding to ([α1(I)]2α2(I)) and β chains, all characteristic of type I collagen. Spectra analysis showed the collagens to maintain their triple-helix structure. The skin collagen had a lower denaturation temperature (29.8 °C) than the swim bladder collagen (32.5 °C), due to its relatively low imino acid content (168 vs. 190 /1000 residues, respectively). Both collagens were highly soluble in acidic pH ranges; Zeta potential values were 5.5 for the skin collagen and 6.2 for the swim bladder collagen. Gulf corvina skin and swim bladder are excellent sources of type I collagen with similar physicochemical properties.