Experimental and theoretical studies of some propiolate esters derivatives

Antimicrobial, anticancer activities, molecular docking, and DFT/B3LYP/LANL2DZ analysis of heterocyclic cellulose derivative and their Cu-complexes

In this study, novel Cu-complexes of heterocyclic cellulose which were synthesized via the reaction of carboxymethyl cellulose (CMC) from bagasse pulp with NH2NH2 to give hydrazide cellulose which easily reacted with CS2 to form salt and then cyclized in the presence of HCl to afford cellulose oxadiazole, or with hydrazine hydrate to give cellulose triazole. Furthermore, the cellulose oxadiazole and triazole moieties acting as chelating agents with metal ion Cu (II), and all synthesized compounds were examined for their spectral analysis to show the adsorption of Cu (II) on the surface of cellulose through intramolecular hydrogen bonding. Results illustrated that cellulose oxadiazole and Cu- cellulose oxadiazole exhibited antimicrobial activities more than triazole and Cu- cellulose triazole. Furthermore, anticancer results showed that both cellulose oxadiazole and triazole exhibited activity higher than Cu-cellulose oxadiazole and Cu-cellulose triazole, where the cellulose triazole showed the highest activity (IC50 = 58.7 μg/μL). Additionally, the docking simulation of the synthesized cellulose complexes with different proteins such as PDBID:3t88, PDBID:4ynt, PDBID:1tgh, PDBID:2wje, and PDBID:4hdq and shortage bond length to confirm the experimental results. Optimization of metal complexes utilized the DFT/B3LYP/LANL2DZ basis set to confirm the stability of these metals theoretically and their physical descriptors and FMO analysis.

Designing a green poly(β-amino ester) for the delivery of nicotinamide drugs with biological activities and conducting a DFT investigation

The environmentally friendly polymerization process was carried out using microwave irradiation without additional solvents or catalysts to produce poly(β-amino ester) (PβAE) which served as a drug delivery system. PβAE was synthesized through Michael addition polymerization of 1,4-butane diol diacrylate and piperazine. Swelling and biodegradation studies were conducted in various solvents and phosphate-buffered saline (PBS, pH 7.4) at 37 °C to evaluate the properties of the polymeric gel. The PβAE matrix demonstrated solubility enhancement for hydrophobic antimicrobial and antitumor-active nicotinamide derivatives (TEINH, APTAT, and MOAPM), controlling their release over 10 days in (PBS). The successful formation of free and loaded PβAE with nicotinamide active materials was confirmed by spectroscopic analysis including Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Optimization and physical descriptor determination via the DFT/B3LYP-631(G) basis set were performed to aid in the biological evaluation of these compounds with elucidation of their physical and chemical interaction between poly(β-amino ester) and nicotinamide drugs.

Anti-proliferative activity, molecular genetics, docking analysis, and computational calculations of uracil cellulosic aldehyde derivatives

In this study, the oxidation of microcrystalline cellulose using NaIO4 to yield the corresponding cellulose aldehyde utilized microwave irradiation as a green tool, the obtained cellulosic aldehyde was confirmed through spectral analysis and it has an active site to react with the synthesized uracil acetamide to afford the corresponding arylidene cellulosic MDAU(4), the latter compound which can easily due to presence of active CH=group behind a cyano group react with nitrogen nucleophile's and cyclized with hydrazine hydrate to give pyrazole cellulosic MDPA(5). The spectral analysis of the obtained cellulosic derivatives was confirmed with FT-IR, NMR, and SEM. Additionally, a neutral red uptake analysis has been used to investigate the cytotoxic activity of the cellulosic compounds MDAC(2), MDAU(4), and MDAP(5) against the cancer cells A549 and Caco2. After 48 h, Compound MDAU(4) had a stronger inhibitory effect on the growth of A549 and Caco2, compared to standard values. Then, using QRT-PCR, the appearance sites of the genes -Catenin, c-Myc, Cyclin D1, and MMP7 in A549 cells were examined. By reducing the expression levels of the Wnt signaling cascade genes -Catenin, c-Myc, Cyclin D1, and MMP7 when administered to A549 cells, compound MDAU(4) was shown in this investigation to be a viable candidate compared to lung cancer. Additionally, docking simulation was used to explore the uracil cellulosic heterocycles attached to different proteins, and computational investigations of these compounds looked at how well their physical characteristics matched the outcomes of their experiments.

Microwave-assisted synthesis, antioxidant activity, docking simulation, and DFT analysis of different heterocyclic compounds

In this investigation, pressure microwave irradiation was used to clarify the activity of 1-(2-hydroxyphenyl)-3-(4-methylphenyl)prop-2-en-1-one (3) towards several active methylene derivatives utilized the pressurized microwave irradiation as green energy resource . Chalcone 3 was allowed to react with ethyl cyanoacetate, acetylacetone, and thioglycolic acid; respectively, at 70 °C with pressure under microwave reaction condition to afford the corresponding 2-hydroxyphenylcyanopyridone, 2-hydroxyphenyl acetylcyclohexanone, and thieno[2,3-c]chromen-4-one derivatives respectively. Moreover, the reaction of chalcone 3 with hydrogen peroxide with stirring affords the corresponding chromen-4-one derivative. All the synthesized compounds were confirmed through spectral tools such as FT-IR, ¹HNMR, ¹³CNMR, and mass spectrum. Furthermore, the synthesized heterocycles were exhibited excellent antioxidant activity and comparable with vitamin C, where the presence of the OH group increases the scavenger radical inhibition. Furthermore, the biological activity of compound 12 was demonstrated through molecular docking stimulation using two proteins, PDBID: 1DH2 and PDBID: 3RP8, which showed that compound 12 possesses greater binding energy and a shorter bond length comparable with ascorbic acid. Also, the compounds were optimized through DFT/B3LYP/6-31G (d,p) basis set and identification of their physical descriptors, whereas the compound 12 was confirmed through X-Ray single structure with Hirsh field analysis of the compound to know the hydrogen electrostatic bond interaction, and correlated with the optimized structure by comparing their bond length, bond angle, FT-IR, and NMR, which gave excellent correlation.

Synthesis of Furan-Based Diamine and Its Application in the Preparation of Bio-Based Polyimide

Furan-based compounds are a new class of compounds characteristic of wide abundance, feasible availability, and environmental friendliness. Presently, polyimide (PI) is the best membrane insulation material in the world, which is widely used in the fields of national defense, liquid crystals, lasers, and so on. At present, most polyimides are synthesized using petroleum-based monomers bearing benzene rings, while furan-based compounds bearing furan rings are rarely used as monomers. The production of petroleum-based monomers is always associated with many environmental issues, and their substitution with furan-based compounds seems a solution to addressing these issues. In this paper, t-butoxycarbonylglycine (BOC-glycine) and 2,5-furandimethanol, bearing furan rings, were employed to synthesize BOC-glycine 2,5-furandimethyl ester, which was further applied for the synthesis of furan-based diamine. This diamine is generally used to synthesize bio-based PI. Their structures and properties were thoroughly characterized. The characterization results showed that BOC-glycine could be effectively obtained using different posttreatment methods. And BOC-glycine 2,5-furandimethyl ester could be effectively obtained by optimizing the accelerating agent of 1,3-dicyclohexylcarbodiimide(DCC) with either 1.25 mol/L or 1.875 mol/L as the optimum value. The PIs originated from furan-based compounds were synthesized and their thermal stability and surface morphology were further characterized. Although the obtained membrane was slightly brittle (mostly due to the less rigidity of furan ring as compared with benzene ring), the excellent thermal stability and smooth surface endow it a potential substitution for petroleum-based polymers. And the current research is also expected to shed some insight into the design and the fabrication of eco-friendly polymers.

28-[1-(3-(Propionyloxy)propyl)-1H-1,2,3-triazol-4-yl]carbonylbetulin

Betulin has a broad spectrum of biological and pharmacological properties, such as anticancer, antibacterial, antifungal, and antiviral. Unfortunately, the low bioavailability makes it difficult to use in medicine. The introduction of a triazole ring to the betulin structure leads to the obtainment of new compounds with higher activity and better bioavailability. The title compound was obtained from the triazole derivative of betulin by conversion of the hydroxyl group to an ester moiety in the Steglich reaction. The chemical structure of the hybrid was characterized by nuclear magnetic resonance (1H NMR, 13C NMR, HSQC, HMBC) and HRMS spectroscopy.

1,5-Dichloroethanoanthracene Derivatives As Antidepressant Maprotiline Analogs: Synthesis, DFT Computational Calculations, and Molecular Docking

The chlorinated tetracyclic 1,5-dichloro-9,10-dihydro-9,10-ethanoanthracen-12-yl)-N-methylmethanamine 1, a maprotiline analog, has been synthesized via reduction and the Diels–Alder reaction followed by reductive amination of aldehyde 2.1D-NMR (DEPT) and 2D-NMR (HSQC, DQF-COSY) techniques were recruited for structural elucidation in addition to HRMS. Density functional theory calculations were performed to identify the possible isomers of the intermediate compound aldehyde 2; these calculations were in good agreement with experimental results where aldehyde 2 could exist in three isomers with comparable energies. In addition, the side chain of this aldehyde 2 was extended via the Wittig reaction to obtain the unsaturated ester 5 that was subjected to selective olefinic catalytic hydrogenation to obtain the corresponding saturated ester 6. Molecular docking simulation showed that all the compounds (1, 2, 5, and 6) have high antidepressant activities and form stable complexes with LeuT by inhibiting the neurotransmitter reuptake at the synapse and hence are good candidates as antidepressant drugs.