Fibronectin immobilized by covalent conjugation or physical adsorption shows different bioactivity on aminated-PET

Fibronectin-Enriched Biomaterials, Biofunctionalization, and Proactivity: A Review

Modern innovation in reconstructive medicine implies the proposition of material-based strategies suitable for tissue repair and regeneration. The development of such systems necessitates the design of advanced materials and the control of their interactions with their surrounding cellular and molecular microenvironments. Biomaterials must actively engage cellular matter to direct and modulate biological responses at implant sites and beyond. Indeed, it is essential that a true dialogue exists between the implanted device and the cells. Biomaterial engineering implies the knowledge and control of cell fate considering the globality of the adhesion process, from initial cell attachment to differentiation. The extracellular matrix (ECM) represents a complex microenvironment able to meet these essential needs to establish a relationship between the material and the contacting cells. The ECM exhibits specific physical, chemical, and biochemical characteristics. Considering the complexity, heterogeneity, and versatility of ECM actors, fibronectin (Fn) has emerged among the ECM protagonists as the most pertinent representative key actor. The following review focuses on and synthesizes the research supporting the potential to use Fn in biomaterial functionalization to mimic the ECM and enhance cell–material interactions.

Fibronectin adsorption on oxygen plasma-treated polyurethane surfaces modulates endothelial cell response

Fibronectin coating increases implant biocompatibility by enhancing surface endothelialization via integrin-mediated binding.

Spatial Presentation of Tissue-Specific Extracellular Matrix Components along Electrospun Scaffolds for Tissue Engineering the Bone-Ligament Interface

The bone-ligament interface transitions from a highly organized type I collagen rich matrix to a nonmineralized fibrocartilage region and finally to a mineralized fibrocartilage region that interfaces with the bone. Therefore, engineering the bone-ligament interface requires a biomaterial substrate capable of maintaining or directing the spatially defined differentiation of multiple cell phenotypes. To date the appropriate combination of biophysical and biochemical factors that can be used to engineer such a biomaterial substrate remain unknown. Here we show that microfiber scaffolds functionalized with tissue-specific extracellular matrix (ECM) components can direct the differentiation of MSCs toward the phenotypes seen at the bone-ligament interface. Ligament-ECM (L-ECM) promoted the expression of the ligament-marker gene tenomodulin (TNMD) and higher levels of type I and III collagen expression compared to functionalization with commercially available type I collagen. Functionalization of microfiber scaffolds with cartilage-ECM (C-ECM) promoted chondrogenesis of MSCs, as evidenced by adoption of a round cell morphology and increased SRY-box 9 (SOX9) expression in the absence of exogenous growth factors. Next, we fabricated a multiphasic scaffold by controlling the spatial presentation of L-ECM and C-ECM along the length of a single electrospun microfiber construct, with the distal region of the C-ECM coated fibers additionally functionalized with an apatite layer (using simulated body fluid) to promote endochondral ossification. These ECM functionalized scaffolds promoted spatially defined differentiation of MSCs, with higher expression of TNMD observed in the region functionalized with L-ECM, and higher expression of type X collagen and osteopontin (markers of endochondral ossification) observed at the end of the scaffold functionalized with C-ECM and the apatite coating. Our results demonstrate the utility of tissue-specific ECM derived components as a cue for directing MSC differentiation when engineering complex multiphasic interfaces such as the bone-ligament enthesis.

Reversible and site-specific immobilization of β2-adrenergic receptor by aptamer-directed method for receptor-drug interaction analysis

Immobilized protein makes a profound impact on the development of assays for drug discovery, diagnosis and in vivo biological interaction analysis. Traditional methods are enormously challenged by the G-protein coupled receptor ascribed to the loss of receptor functions. We introduced a β₂-adrenergic receptor (β₂-AR) aptamer into the immobilization of the receptor. This was achieved by mixing the receptor conjugated silica gel with cell lysates containing the receptor. We found that the aptamer-directed method makes immobilized β₂-AR good stability in seven days and high specificity of ligand recognition at the subtype receptor level. Feasibility of the immobilized β₂-AR in drug-receptor interaction analysis was evaluated by injection amount-dependent method, nonlinear chromatography, and peak decay analysis. Salbutamol, methoxyphenamine, ephedrine hydrochloride, clorprenaline, tulobuterol, bambuterol, propranolol and ICI 118551 bound to the receptor through one type of binding sites. The association constants presented good agreement within the three methods but exhibited clear differences from the data by radio-ligand binding assay. Regarding these results, we concluded that the aptamer-directed method will probably become an alternative for reversible and site-specific immobilization of GPCRs directly from complex matrices; the immobilized receptor is qualitative for drug-receptor interaction analysis.

A Novel Cell Penetrating Peptide for the Differentiation of Human Neural Stem Cells

Retinoic acid (RA) is a bioactive lipid that has been shown to promote neural stem cell differentiation. However, the highly hydrophobic molecule needs to first solubilize and translocate across the cell membrane in order to exert a biological response. The cell entry of RA can be aided by cell penetrating peptides (CPPs), which are short amino acid sequences that are able to carry bioactive cargo past the cell membrane. In this work, a novel cell penetrating peptide was developed to deliver RA to human neural stem cells and, subsequently, promote neuronal differentiation. The novel CPP consists of a repeating sequence, whose number of repeats is proportional to the efficiency of cell penetration. Using fluorescence microscopy, the mode of translocation was determined to be related to an endocytic pathway. The levels of β-III tubulin (Tubb3) and microtubule associated protein 2 (MAP2) expression in neural stem cells treated with RA conjugated to the CPP were assessed by quantitative immunocytochemistry.

A 3D bioinspired highly porous polymeric scaffolding system for in vitro simulation of pancreatic ductal adenocarcinoma

Pancreatic ductal adenocarcinoma is an aggressive disease with an extremely low survival rate. This is due to the (i) poor prognosis and (ii) high resistance of the disease to current treatment options. The latter is partly due to the very complex and dense tissue/tumour microenvironment of pancreatic cancer, which contributes to the disease's progression and the inhibition of apoptotic pathways. Over the last years, advances in tissue engineering and the development of three-dimensional (3D) culture systems have shed more light into cancer research by enabling a more realistic recapitulation of the niches and structure of the tumour microenvironment. Herein, for the first time, 3D porous polyurethane scaffolds were fabricated and coated with fibronectin to mimic features of the structure and extracellular matrix present in the pancreatic cancer tumour microenvironment. The developed 3D scaffold could support the proliferation of the pancreatic tumour cells, which was enhanced with the presence of fibronectin, for a month, which is a significantly prolonged in vitro culturing duration. Furthermore, in situ imaging of cellular and biomarker distribution showed the formation of dense cellular masses, the production of collagen-I by the cells and the formation of environmental stress gradients (e.g. HIF-1α) with similar heterogeneity trends to the ones reported in in vivo studies. The results obtained in this study suggest that this bioinspired porous polyurethane based scaffold has great potential for in vitro high throughput studies of pancreatic cancer including drug and treatment screening.

Adding Functions to Biomaterial Surfaces through Protein Incorporation

The concept of biomaterials has evolved from one of inert mechanical supports with a long-term, biologically inactive role in the body into complex matrices that exhibit selective cell binding, promote proliferation and matrix production, and may ultimately become replaced by newly generated tissues in vivo. Functionalization of material surfaces with biomolecules is critical to their ability to evade immunorecognition, interact productively with surrounding tissues and extracellular matrix, and avoid bacterial colonization. Antibody molecules and their derived fragments are commonly immobilized on materials to mediate coating with specific cell types in fields such as stent endothelialization and drug delivery. The incorporation of growth factors into biomaterials has found application in promoting and accelerating bone formation in osteogenerative and related applications. Peptides and extracellular matrix proteins can impart biomolecule- and cell-specificities to materials while antimicrobial peptides have found roles in preventing biofilm formation on devices and implants. In this progress report, we detail developments in the use of diverse proteins and peptides to modify the surfaces of hard biomaterials in vivo and in vitro. Chemical approaches to immobilizing active biomolecules are presented, as well as platform technologies for isolation or generation of natural or synthetic molecules suitable for biomaterial functionalization.

Fibronectin-modified surfaces for evaluating the influence of cell adhesion on sensitivity of leukemic cells to siRNA nanoparticles

Aim: This study aimed to create fibronectin (FN)-grafted polymeric surfaces to investigate the influence of leukemic cell adhesion on siRNA treatment. Materials & methods: FN was grafted on plasma-treated PTFE surfaces using chemical crosslinkers. Adhesion and growth of chronic myeloid leukemia K562 cells on modified surfaces were investigated. The silencing effect of siRNA/lipid-polymers nanoparticles on cells grown on FN-grafted surfaces was evaluated. Results: Crosslinker-mediated immobilization showed significant FN grafting on surfaces, which provided K562 cell adhesion and growth advantage. siRNA nanoparticle silencing was similarly effective on FN-adhered and suspension-growing K562 cells. Conclusion: This study provided initial data to develop a cell-adhesive system to investigate therapeutic effects on leukemic cells. The response of chronic myeloid leukemia cells to siRNA nanoparticles was independent on cell attachment.

Endothelialization of polyurethanes: Surface silanization and immobilization of REDV peptide

The paper presents method for chemical immobilization of arginine-glutamic acid-aspartic acid-valine (REDV) peptide on polyurethane surface. The peptide has been covalently bonded using silanes as a spacer molecules. The aim of this work was to investigate the proposed modification process and assess its biological effectiveness, especially in contact with blood and endothelial cells. Physicochemical properties were examined in terms of wettability, atomic composition and density of introduced functional groups and peptide molecules. Experiments with blood showed that material coating reduced number of surface-adhered platelets and fibrinogen molecules. In contrast to polyurethane (PU), there were no blood components deposited on REDV-modified materials (PU-REDV); fibrinogen adsorption on PU-REDV surface has been strongly reduced compared to PU. Analysis of cell adhesion after 1, 2, 3, 4, and 5 days of culture showed a significant increase of the cell-coated area on PU-REDV compared to PU. However, an intense cell growth appeared also on the control surface modified without the addition of REDV. Thus, the positive effect of REDV peptide on the adhesion of HUVEC could not be unequivocally confirmed.

Prospects of common biomolecules as coating substances for polymeric biomaterials

The concept of using common biomolecules like proteins, carbohydrates,etc., for improving the biocompatibility seems rational and effective because of the bio-friendly surface that they present, remains closer in mimicking the innate environment.

Presentation of fibronectin fragments using affinity protein interactions for enhanced retention and function

We present a protein immobilization system, based on the Src Homology 3 (SH3) affinity domain, allowing for a transient interaction between a fibronectin ligand and a biomaterial surface. This strategy leads to enhanced retention of the fibronectin fragment over adsorbed fibronectin, and increased cellular proliferation and motility over either covalently immobilized or adsorbed fibronectin. The results indicate that intermediate affinity protein immobilization could provide benefits for tissue engineering beyond the traditional immobilization techniques, adsorption or covalent attachment.

Metal cation cross-linked nanocellulose hydrogels as tissue engineering substrates

The use of cellulose materials for biomedical applications is attractive due to their low cost, biocompatibility, and biodegradability. Specific processing of cellulose to yield nanofibrils further improves mechanical properties and suitability as a tissue engineering substrate due to the similarity to the fibrous structure, porosity, and size-scale of the native extracellular matrix. In order to generate the substrate, nanocellulose hydrogels were fabricated from carboxylated cellulose nanofibrils via hydrogelation using metal salts. Hydrogels cross-linked with Ca(2+) and Fe(3+) were investigated as tissue culture substrates for C3H10T1/2 fibroblast cells. Control substrates as well as those with physically adsorbed and covalently attached fibronectin protein were evaluated with X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), and enzyme linked immunosorbent assay (ELISA). Significantly more cells were attached to surfaces modified with protein, with the highest number of cells adhered to the calcium cross-linked hydrogels with covalently attached protein.

Surface Entrapment of Fibronectin on Electrospun PLGA Scaffolds for Periodontal Tissue Engineering

Nowadays, the challenge in the tissue engineering field consists in the development of biomaterials designed to regenerate ad integrum damaged tissues. Despite the current use of bioresorbable polyesters such as poly(l-lactide) (PLA), poly(d,l-lactide-co-glycolide) (PLGA), and poly-ɛ-caprolactone in soft tissue regeneration researches, their hydrophobic properties negatively influence the cell adhesion. Here, to overcome it, we have developed a fibronectin (FN)-functionalized electrospun PLGA scaffold for periodontal ligament regeneration. Functionalization of electrospun PLGA scaffolds was performed by alkaline hydrolysis (0.1 or 0.01 M NaOH). Then, hydrolyzed scaffolds were coated by simple deposition of an FN layer (10 μg/mL). FN coating was evidenced by X-ray photoelectron analysis. A decrease of contact angle and greater cell adhesion to hydrolyzed, FN-coated PLGA scaffolds were noticed. Suitable degradation behavior without pH variations was observed for all samples up to 28 days. All treated materials presented strong shrinkage, fiber orientation loss, and collapsed fibers. However, functionalization process using 0.01 M NaOH concentration resulted in unchanged scaffold porosity, preserved chemical composition, and similar mechanical properties compared with untreated scaffolds. The proposed simplified method to functionalize electrospun PLGA fibers is an efficient route to make polyester scaffolds more biocompatible and shows potential for tissue engineering.

Chemical modification and characterization of poly(ethylene terephthalate) surfaces for collagen immobilization

The functionalization of poly(ethylene terephthalate) (PET) surface films by reactions with multifunctional amines such as triethylenetetramine (TETA), and tetraethylenepentamine (TEPA) was investigated. For the functionalization of PET films surface we used a new way of treatment, a “sandwich model”. Physical-chemical properties of functionalized PET films were analysed. Qualitative and quantitative determination of the introduced amine groups were examined by means of Fourier Transform Infrared Attenuated Total Reflexion (FTIR — ATR), X-ray photoelectron spectroscopy (XPS), and potentiometric titration. Gained wetting properties were determined by using contact angle measurements and thoroughly analysed by acid-base approach. In addition, surface topography was investigated by atomic force microscopy (AFM). The amount of the introduced amino groups after TETA incorporation has been found to be two times higher as compared to TEPA. Wetting properties were significantly improved after aminolysis. Surface free energy was higher for PET — TETA treated film than that observed for PET — TEPA treated which is in accordance with titration results. The collagen immobilization onto PET treated films was evidenced by using AFM and subsequently by using XPS.

Biomimetic modification of metallic cardiovascular biomaterials: from function mimicking to endothelialization in vivo

Biosystem-surface interactions play an important role in various biological events and determine the ultimate functionality of implanted devices. Endothelialization or mimicking of endothelium on the surface of cardiovascular materials is a promising way to solve the problems of material-induced thrombosis and restenosis. Meanwhile, a multifunctional surface design is needed as antithrombotic properties should be considered in the period when the implants are not yet completely endothelialized. In this article, we summarize some successful approaches used in our laboratory for constructing multifunctional endothelium-like surfaces on metallic cardiovascular biomaterials through chemical modification of the surface or by the introduction of specific biological molecules to induce self-endothelialization in vivo. Some directions on future research in these areas are also presented.

Fibronectin layers by matrix-assisted pulsed laser evaporation from saline buffer-based cryogenic targets

The deposition of fibronectin (FN) from saline buffer-based cryogenic targets by matrix-assisted pulsed laser evaporation (MAPLE) onto silicon substrates is reported. A uniform distribution of FN was revealed by Ponceau staining after control experiments on nitrocellulose paper. Well-organized particulates with heights from hundreds of nanometers up to more than 1 μm packed in homogeneous layers were evidenced by optical microscopy and profilometry on Si substrates. Atomic force microscopy images showed regions composed of buffer and FN aggregates forming a compact film. Comparison of infrared spectra of drop-cast and MAPLE-deposited FN confirmed the preservation of composition and showed no degradation of the protein. The protein deposition on Si was confirmed by antibody staining. Small aggregates and fluorescent fibrils were visualized by fluorescence microscopy. Superior attachment of human osteoprogenitor cells cultivated for 3 h proved the presence of stable and intact FN molecules after transfer.

Carbodiimide conjugation of fibronectin on collagen basal lamina analogs enhances cellular binding domains and epithelialization

To improve the regenerative potential of biomaterials used as bioengineered scaffolds, it is necessary to strategically incorporate biologically active molecules that promote in vivo cellular processes that lead to a fully functional tissue. This work evaluates the effects of strategically binding fibronectin (FN) to collagen basal lamina analogs to enhance keratinocyte functions necessary for complete skin regeneration. We found that FN that was passively adsorbed to collagen-glycosaminoglycan basal lamina analogs enhanced epithelial thickness and keratinocyte proliferation compared with nontreated basal lamina analogs at 3 days of air/liquid (A/L) interface culture. Additionally, we evaluated the availability of FN cellular binding site domains when FN was either passively adsorbed or [1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride] conjugated to basal lamina analogs fabricated from collagen-glycosaminoglycan coprecipitate or self-assembled type I collagen. It was found that 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride conjugation of FN significantly enhanced FN binding site presentation as well as epithelial thickness. Overall, the results gained from this study will be used to improve the regenerative capacity of basal lamina analogs for bioengineered skin substitutes as well as the development of bioengineered scaffolds for other tissue engineering applications.

Atomic force microscopy evidence for conformational changes of fibronectin adsorbed on unmodified and sulfonated polystyrene surfaces

The effect of polystyrene surface polarity on the conformation of adsorbed fibronectin (FN) has been studied with atomic force microscopy. We demonstrated that bare sulfonated and nonsulfonated polystyrene surfaces featured similar topographies. After the FN adsorption, direct comparison of both types of substrata revealed drastically different topographies, roughness values, and also cell-adhesive properties. This was interpreted in terms of FN conformational changes induced by the surface polarity. At high-solute FN concentrations the multilayer FN adsorption took place resulting, for the sulfonated substratum, in an increase of surface roughness, whereas for the nonsulfonated one the roughness was approximately stable. Conversely, the FN conformation characteristic for the first saturative layer tended to be conserved in the consecutive layers, as evidenced by height histograms. The height of individual FN molecules indicated, consonantly with the derived thickness of the adsorbed protein layer (the latter value being 1.4 nm and 0.6 nm, respectively, for an unmodified and sulfonated polystyrene surface), that molecules are flattened on polar surfaces and more compact on nonsulfonated ones. It was also demonstrated that the FN adsorption and conformation on polymeric substrata, and hence the resultant cell-adhesive properties, depended on the chemistry of the original surface rather than on its topography. Our results also demonstrated the ability of surface polarity to influence the protein conformation and its associated biological activity.

Filho FC. Adsorção de fibronectina a arcabouços de polihidroxibutirato aplicáveis à engenharia óssea

Fibronectina sérica humana foi adicionada à superfície de arcabouços de polihidroxibutirato (PHB) a fim de otimizar a adesão de osteoblastos humanos (HOB). Visando a criar sítios para a imobilização de fibronectina (FN), os arcabouços foram previamente tratados por meio de reação com etilenodiamina. O tratamento modificou a morfologia e a composição química dos arcabouços, possibilitando um aumento no teor de FN adsorvido à superfície. Imagens de AFM mostraram que as moléculas de FN assumiram conformações distintas, de acordo com a superfície na qual foi imobilizada. A FN adicionada aos arcabouços não modificados possivelmente assumiu uma conformação estendida, expondo os grupamentos RGD. Com isso, houve um aumento na adesão de HOB a estes materiais. Por outro lado, a FN na superfície dos arcabouços previamente tratados possivelmente apresentou-se na forma compacta, suprimindo a adesão de HOB.